| View previous topic :: View next topic |
| Author |
Message |
fmeister
n00b
Joined: 12 Nov 2003
Posts: 7
|
 Posted: Tue Apr 06, 2004 6:35 pm Post subject: routing-problem |
 |
|
hi!
| Code: |
192.168.0.2
\ 192.168.0.8
\ /
\ /
\ /
(uplink) (wlan ap)
GW(194.208.160.1) ******************* :::::::::::::
| | | |
#################### ############
| | | |
192.168.0.6 192.168.0.3 192.168.0.5 |
|
eth1 192.168.0.1
(room2) eth1:0 194.208.160.100
-------------------
eth0 194.208.122.42
(room1)
|
I have two rooms. In one room I have a cable-modem with the IP 194.208.122.42. There I have a gentoo-server with two interfaces. one for the internal, one for the external net. the internal interface is connected to a wlan-ap with a integrated switch. the switch is connected to a few workstations and to a switch in the other room. in the other room the switch is also connected to a few workstations and and to a wlan-modas (like a cablemodem).
Now my question: Is it possible to add a second ip to my internal interface to my internal network-card and then share both network-connections with nat ?
thx, flo |
|
| Back to top |
|
 |
davcot
n00b
Joined: 05 Apr 2004
Posts: 11
Location: Québec, Canada
|
| Posted: Tue Apr 06, 2004 8:54 pm Post subject: |
|
|
A good thing to do would be to separate your network into 2 different subnets that would be visible from your server.
_________________
Who needs a signature anyways ??? |
|
| Back to top |
|
|
|
Networking & Security
