View previous topic :: View next topic |
Author |
Message |
skion Tux's lil' helper

Joined: 18 Aug 2003 Posts: 99 Location: Amsterdam, Netherlands
|
Posted: Tue Apr 13, 2004 9:46 pm Post subject: |
|
|
steel300 wrote: | GigaRaid isn't in there. If you have the patch, please email it to me and I will include it again. |
Here's the patch that was previously included: http://gene.science.uva.nl/~ennesp/ite/iteraid.patch.bz2 _________________ - Skion |
|
Back to top |
|
 |
IvanHoe l33t


Joined: 05 Oct 2002 Posts: 658
|
Posted: Tue Apr 13, 2004 9:52 pm Post subject: |
|
|
steel300 wrote: | GigaRaid isn't in there. If you have the patch, please email it to me and I will include it again. |
I don't have a patch, I just modified drivers/scsi/Kconfig and drivers/scsi/Makefile by hand. |
|
Back to top |
|
 |
sdaffis Tux's lil' helper


Joined: 16 Nov 2003 Posts: 100 Location: Umeå, Sweden
|
Posted: Tue Apr 13, 2004 11:03 pm Post subject: Oh my *Big Gay Al* :) |
|
|
Man, I love love-sources
I had some problems with APIC on my NF7-S 2.0 board with the latest gentoo-dev-sources. I found love-sources through some forum-searching and ended up building 2.6.5-love4 and what a relief! I have apic enabled and was able to play Unreal Tournament "classic" for 45 minutes until I got tired of it
XMMS too doesn't produce crashes as it did before.. Man, is love-sources really something!! *loves*
Praise steel300 and lovechild!!  |
|
Back to top |
|
 |
steel300 Veteran


Joined: 10 Jul 2003 Posts: 1155
|
Posted: Tue Apr 13, 2004 11:09 pm Post subject: |
|
|
Thank you. I was looking for that. _________________ Rationality is the recognition of the fact that nothing can alter the truth and nothing can take precedence over that act of perceiving it. |
|
Back to top |
|
 |
Naughty-Boy n00b

Joined: 08 Mar 2004 Posts: 14
|
Posted: Tue Apr 13, 2004 11:14 pm Post subject: |
|
|
A n00b question:
What i need to patch the kernel(and what i have to do)? |
|
Back to top |
|
 |
boroshan l33t


Joined: 16 Apr 2003 Posts: 730 Location: upside down
|
Posted: Tue Apr 13, 2004 11:32 pm Post subject: |
|
|
download the ebuild
stick it in /usr/local/portage/sys-kernel/love-sources
make sure you have PORTAGE_OVERLAY set
emerge love-sources
ebuild /usr/local/portage/sys-kernel/love-sources/love-source<whatever>.ebuild digest
emerge love-love-sources
cd /usr/src
then compile your new love kernel as you would any other
there's a love sources howto somewhere on the forums that goes into more detail.
failing that patch -p1 < patchfile from the top level kernel source directory should do it _________________ Don't let THEM immanentize the Eschaton! |
|
Back to top |
|
 |
Evil Dark Archon Guru


Joined: 21 Dec 2002 Posts: 562 Location: Santa Rosa, CA
|
Posted: Wed Apr 14, 2004 5:19 am Post subject: |
|
|
boroshan wrote: | download the ebuild
stick it in /usr/local/portage/sys-kernel/love-sources
make sure you have PORTAGE_OVERLAY set
emerge love-sources
ebuild /usr/local/portage/sys-kernel/love-sources/love-source<whatever>.ebuild digest
emerge love-love-sources
cd /usr/src
then compile your new love kernel as you would any other
there's a love sources howto somewhere on the forums that goes into more detail.
failing that patch -p1 < patchfile from the top level kernel source directory should do it |
you do the ebuild digest before you emerge love-sources and if you add digest to the end of the FEATURES variable in make.conf you don't even need to worry about doing the ebuild digest part _________________ This post has been over explained for newb-informing purposes.
Registered Linux user 347334
Abit AV8-3rd eye, AMD Athlon64 3500+ 90nm, ATI Radeon x850 pro |
|
Back to top |
|
 |
boroshan l33t


Joined: 16 Apr 2003 Posts: 730 Location: upside down
|
Posted: Wed Apr 14, 2004 5:43 am Post subject: |
|
|
Evil Dark Archon wrote: |
you do the ebuild digest before you emerge love-sources and if you add digest to the end of the FEATURES variable in make.conf you don't even need to worry about doing the ebuild digest part |
but that'd mean downloading the patch and the base kernel source and anything else needed first and slapping them in distfiles. If you emerge it twice you get the downloads done for you
I didn't realise there was an auto-digest FEATURE though _________________ Don't let THEM immanentize the Eschaton! |
|
Back to top |
|
 |
Pink Veteran


Joined: 24 Jul 2003 Posts: 1062
|
Posted: Wed Apr 14, 2004 7:23 am Post subject: |
|
|
boroshan wrote:
Quote: | but that'd mean downloading the patch and the base kernel source and anything else needed first and slapping them in distfiles. If you emerge it twice you get the downloads done for you
I didn't realise there was an auto-digest FEATURE though |
No, it means download the ebuild (the 1k file) and put it in your portage overlay directory.
Then simply run Code: | ebuild love-sources-ebuild digest | this will download the relevent files for you and create the correct files in the portage overlay directory. No need to download patches, etc by hand.
Then, you emerge love-sources to build the files downloaded from the ebuild digest command.
HTH |
|
Back to top |
|
 |
boroshan l33t


Joined: 16 Apr 2003 Posts: 730 Location: upside down
|
Posted: Wed Apr 14, 2004 7:41 am Post subject: |
|
|
oh ok. thanks. that's useful to know _________________ Don't let THEM immanentize the Eschaton! |
|
Back to top |
|
 |
Nebvin Tux's lil' helper


Joined: 10 Oct 2002 Posts: 83 Location: Alberta, Canada
|
Posted: Wed Apr 14, 2004 3:20 pm Post subject: |
|
|
or you can run "emerge love-sources --digest" and it will download the files, digest them, then patch/install them _________________ Nebbie
"There are 10 types of people in the world, those that understand binary and those that don't." |
|
Back to top |
|
 |
t_2199 Tux's lil' helper

Joined: 20 Mar 2004 Posts: 146
|
Posted: Wed Apr 14, 2004 3:40 pm Post subject: |
|
|
My Wireless Lan Usb (Atmel Drivers) adapter doesn´t work with this kernel... (fails on loading firmware)
Running now linux-2.6.5-love1 again works fine here.. |
|
Back to top |
|
 |
PieterB Apprentice

Joined: 19 Jan 2004 Posts: 158 Location: Aalter, Belgium
|
Posted: Wed Apr 14, 2004 4:25 pm Post subject: |
|
|
I always use the same configuration for love-sources but now I tried do disable preemption and experienced lock-ups..... my whole linux was frozen. I compiled it again.... same problem.
Now i've enabled preemtible kernel again, problem solved... (for now) but I want to disable preemption because it's makes your linux a little slower.... (<-> manual...)
What could be the reason for this?
Good work steel! Love is the only kernel installed on this system.... _________________ LinuxUser: #310384 |
|
Back to top |
|
 |
Admiral LSD Guru


Joined: 27 Jun 2003 Posts: 522 Location: Northam, W.A., Australia
|
Posted: Wed Apr 14, 2004 4:30 pm Post subject: |
|
|
steel300 wrote: | I've heard a lot of troubles with the ATI drivers recently. I'm still working out a solution. |
I don't think the issue here is anything specific to love-sources, I'm getting the same problem (fglrx.ko not compiling right) here with vanilla 2.6.5-mm4. _________________ Wasurenaide...
...watashi ga iru koto o.
Itsudatte soba ni iru yo.
Registered Linux user #319839 |
|
Back to top |
|
 |
steel300 Veteran


Joined: 10 Jul 2003 Posts: 1155
|
Posted: Wed Apr 14, 2004 4:56 pm Post subject: |
|
|
Admiral LSD` wrote: | steel300 wrote: | I've heard a lot of troubles with the ATI drivers recently. I'm still working out a solution. |
I don't think the issue here is anything specific to love-sources, I'm getting the same problem (fglrx.ko not compiling right) here with vanilla 2.6.5-mm4. |
It's a problem with mm. See my note above about reversing the kbuild-external-modules patch. _________________ Rationality is the recognition of the fact that nothing can alter the truth and nothing can take precedence over that act of perceiving it. |
|
Back to top |
|
 |
IvanHoe l33t


Joined: 05 Oct 2002 Posts: 658
|
Posted: Wed Apr 14, 2004 5:42 pm Post subject: |
|
|
How do I unmerge the love2 sources? |
|
Back to top |
|
 |
IvanHoe l33t


Joined: 05 Oct 2002 Posts: 658
|
Posted: Wed Apr 14, 2004 5:50 pm Post subject: |
|
|
steel300 wrote: | Admiral LSD` wrote: | steel300 wrote: | I've heard a lot of troubles with the ATI drivers recently. I'm still working out a solution. |
I don't think the issue here is anything specific to love-sources, I'm getting the same problem (fglrx.ko not compiling right) here with vanilla 2.6.5-mm4. |
It's a problem with mm. See my note above about reversing the kbuild-external-modules patch. |
I must be blind, because I don't see where your note about "reversing the kbuild-external-modules patch" is. Is it in another thread? |
|
Back to top |
|
 |
steel300 Veteran


Joined: 10 Jul 2003 Posts: 1155
|
Posted: Wed Apr 14, 2004 6:15 pm Post subject: |
|
|
IvanHoe wrote: | steel300 wrote: | Admiral LSD` wrote: | steel300 wrote: | I've heard a lot of troubles with the ATI drivers recently. I'm still working out a solution. |
I don't think the issue here is anything specific to love-sources, I'm getting the same problem (fglrx.ko not compiling right) here with vanilla 2.6.5-mm4. |
It's a problem with mm. See my note above about reversing the kbuild-external-modules patch. |
I must be blind, because I don't see where your note about "reversing the kbuild-external-modules patch" is. Is it in another thread? |
Check page three, about a quarter of the way down. _________________ Rationality is the recognition of the fact that nothing can alter the truth and nothing can take precedence over that act of perceiving it. |
|
Back to top |
|
 |
IvanHoe l33t


Joined: 05 Oct 2002 Posts: 658
|
Posted: Wed Apr 14, 2004 6:33 pm Post subject: |
|
|
steel300 wrote: | Check page three, about a quarter of the way down. |
Doh, I thought is was some work-around to get the ati-drivers working. |
|
Back to top |
|
 |
kevnician n00b


Joined: 05 Feb 2004 Posts: 8 Location: Canada
|
Posted: Wed Apr 14, 2004 8:42 pm Post subject: nforce apic |
|
|
I tried 2.6.5-love4 using the same config as my 2.6.4-love1 which works flawlessly and the old issue that i had with the 2.6-test kernel came back of the system hardlocking under any kind of heavy IDE transfer. I checked and the nforce-apic patch to arch/i386/kernel/mpparse.c had been removed from 2.6.5. I was wondering if this was on purpose or...? Anyway adding it cleared my issues again. |
|
Back to top |
|
 |
Robe n00b


Joined: 05 Jan 2004 Posts: 64
|
Posted: Wed Apr 14, 2004 11:27 pm Post subject: Atmel drivers |
|
|
t_2199 wrote: | My Wireless Lan Usb (Atmel Drivers) adapter doesn´t work with this kernel... (fails on loading firmware)
|
I have the same USB ATMEL device (Ver 2.8 ).
Which drivers are you using ? I use the 0.12b drivers from
http://at76c503a.berlios.de/ . After each new kernel install I do a make clean - make - make install using these drivers and have not had any problems. |
|
Back to top |
|
 |
danone Guru


Joined: 18 Jan 2004 Posts: 398 Location: Germany
|
Posted: Thu Apr 15, 2004 4:30 am Post subject: |
|
|
I don't have problems I also disabled preemption and use SMP/SMT support
BTW: 2.6.6-rc1 is out _________________ [:: Processor: Intel Core 2 Duo E6300 ]::[ Mainboard: ASUS P5B Deluxe ]::[ GPU: nVidia 7900GTO ::]
[:: RAM: HyperX DDR2 800 ]::[ Samsung SH-183A SATA:: CREATiVE X-Fi XtremeMusic :: ] |
|
Back to top |
|
 |
stahlsau Guru


Joined: 09 Jan 2004 Posts: 584 Location: WildWestwoods
|
Posted: Thu Apr 15, 2004 6:27 am Post subject: |
|
|
Quote: | the old issue that i had with the 2.6-test kernel came back of the system hardlocking under any kind of heavy IDE transfer. |
yes, same here. Where did you get this patch? Would be nice if ya could link it  |
|
Back to top |
|
 |
neonik Guru


Joined: 08 Oct 2003 Posts: 501
|
Posted: Thu Apr 15, 2004 10:12 am Post subject: |
|
|
How about 2.6.5-mm6?
Is it also unstable?
Haven't tried it yet out - why I ask this. Maybe someone got some info on that? _________________ Best regards,
neonik
netshot-0.0.8 - script that takes screenshots, generates their thumbnails and uploads them all! (has not been updated). |
|
Back to top |
|
 |
seppe Guru


Joined: 01 Sep 2003 Posts: 431 Location: Hove, Antwerp, Belgium
|
Posted: Thu Apr 15, 2004 11:51 am Post subject: |
|
|
I'm compiling love-sources now
But I'm impressed .. is it really true that enabling preëmptive kernel causes a slower system?
Oh and I use these CFLAGS for my kernel:
-oS -pipe
Because -oS gives smaller executables, and I want my kernel to be as small as possible.
Anyone have other tips on love-sources? _________________ nitro-sources, because between stable and experimental there exists only speed
Latest release I made: 2.6.13.2-nitro1 |
|
Back to top |
|
 |
|