| View previous topic :: View next topic |
| Author |
Message |
samuel.penn
Tux's lil' helper
Joined: 14 Dec 2003
Posts: 114
Location: UK
|
 Posted: Thu May 20, 2004 9:37 pm Post subject: Freecom external usb harddrive |
 |
|
I've just got a Freecom external 160GB USB hardrive, which is very nice, except I can't get it to work on Linux (I've tried two SuSE versions plus my Gentoo box, details of which are below.
It seems to work on a Windows box.
My USB card reader is working (though the /dev/sda* files are only created if its plugged in with a card on boot, otherwise they don't exist when the machine boots and it won't work. I don't know if this is a related problem or not). I also have ethernet over USB working to my Zaurus. However, I can't get the external drive to work.
I have USB debugging switched on in the kernel (2.4.24).
When I plug in the drive, I get the following output in /var/log/messages:
| Code: |
May 20 22:23:52 thor host/uhci.c: root-hub INT complete: port1: 93 port2: 80 data: 2
May 20 22:23:52 thor hub.c: port 1, portstatus 101, change 1, 12 Mb/s
May 20 22:23:52 thor hub.c: port 1 connection change
May 20 22:23:52 thor hub.c: port 1, portstatus 101, change 1, 12 Mb/s
May 20 22:23:52 thor hub.c: port 1, portstatus 101, change 0, 12 Mb/s
May 20 22:23:52 thor hub.c: port 1, portstatus 101, change 0, 12 Mb/s
May 20 22:23:52 thor hub.c: port 1, portstatus 101, change 0, 12 Mb/s
May 20 22:23:52 thor hub.c: port 1, portstatus 101, change 0, 12 Mb/s
May 20 22:23:52 thor hub.c: port 1, portstatus 103, change 0, 12 Mb/s
May 20 22:23:52 thor hub.c: new USB device 00:1f.2-1, assigned address 4
May 20 22:23:52 thor usb.c: kmalloc IF dfdc1660, numif 1
May 20 22:23:52 thor usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
May 20 22:23:57 thor usb_control/bulk_msg: timeout
May 20 22:23:57 thor usb.c: error getting string descriptor 0 (error=-110)
May 20 22:23:57 thor host/uhci.c: uhci_result_control() failed with status 440000
May 20 22:23:57 thor [dfdaa0c0] link (1fdaa062) element (1fdab1e0)
May 20 22:23:57 thor 0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
May 20 22:23:57 thor 1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170880)
May 20 22:23:57 thor 2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
May 20 22:23:57 thor
May 20 22:23:57 thor usb.c: error getting string descriptor 0 (error=-110)
May 20 22:23:57 thor host/uhci.c: uhci_result_control() failed with status 440000
May 20 22:23:57 thor [dfdaa0f0] link (1fdaa062) element (1fdab1e0)
May 20 22:23:57 thor 0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
May 20 22:23:57 thor 1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170880)
May 20 22:23:57 thor 2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
May 20 22:23:57 thor
May 20 22:23:57 thor usb.c: error getting string descriptor 0 (error=-110)
May 20 22:23:57 thor usb-storage: act_altsettting is 0
May 20 22:23:57 thor usb-storage: id_index calculated to be: 95
May 20 22:23:57 thor usb-storage: Array length appears to be: 97
May 20 22:23:57 thor usb-storage: USB Mass Storage device detected
May 20 22:23:57 thor usb-storage: Endpoints: In: 0xd4b0a3b4 Out: 0xd4b0a3a0 Int: 0x00000000 (Period 0)
May 20 22:23:57 thor host/uhci.c: uhci_result_control() failed with status 440000
May 20 22:23:57 thor [dfdaa0c0] link (1fdaa062) element (1fdab1e0)
May 20 22:23:57 thor 0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
May 20 22:23:57 thor 1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170780)
May 20 22:23:57 thor 2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
May 20 22:23:57 thor
May 20 22:23:57 thor usb.c: error getting string descriptor 0 (error=-110)
May 20 22:23:57 thor host/uhci.c: uhci_result_control() failed with status 440000
May 20 22:23:57 thor [dfdaa0f0] link (1fdaa062) element (1fdab1e0)
May 20 22:23:57 thor 0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
May 20 22:23:57 thor 1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170780)
May 20 22:23:57 thor 2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
May 20 22:23:57 thor
May 20 22:23:57 thor usb.c: error getting string descriptor 0 (error=-110)
May 20 22:23:57 thor host/uhci.c: uhci_result_control() failed with status 440000
May 20 22:23:57 thor [dfdaa0c0] link (1fdaa062) element (1fdab1e0)
May 20 22:23:57 thor 0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
May 20 22:23:57 thor 1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170780)
May 20 22:23:57 thor 2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
May 20 22:23:57 thor
May 20 22:23:57 thor usb.c: error getting string descriptor 0 (error=-110)
May 20 22:23:57 thor usb-storage: Found existing GUID 07abfccd0000000000000000
May 20 22:23:57 thor WARNING: USB Mass Storage data integrity not assured
May 20 22:23:57 thor USB Mass Storage device found at 4
May 20 22:23:57 thor usb.c: usb-storage driver claimed interface dfdc1660
May 20 22:23:57 thor usb.c: kusbd: /sbin/hotplug add 4
May 20 22:23:57 thor hub.c: port 2, portstatus 100, change 0, 12 Mb/s
May 20 22:23:57 thor default.hotplug[2106]: arguments (usb) env (OLDPWD=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 INTERFACE=8/6/80 PRODUCT=7ab/fccd/406 TYPE=0/0/0 DEBUG=kernel _=/bin/env)
May 20 22:23:57 thor default.hotplug[2106]: invoke /etc/hotplug/usb.agent ()
May 20 22:24:00 thor CRON[2121]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
May 20 22:24:01 thor usb.agent[2106]: ... no modules for USB product 7ab/fccd/406
|
dmesg output is as follows:
| Code: |
storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 c3 27 1f c0
usb-storage: Bulk command S 0x43425355 T 0x2 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned -32 xferred 0/255
usb-storage: clearing endpoint halt for pipe 0xc0010280
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0122a0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: usb_stor_clear_halt: result=-110
usb-storage: usb_stor_transfer_partial(): unknown error
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: clearing endpoint halt for pipe 0xc0010280
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0122a0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: usb_stor_clear_halt: result=-110
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: clearing halt for pipe 0xc0010280
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0122a0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: usb_stor_clear_halt: result=-110
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0127e0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: Bulk soft reset failed -110
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 c3 27 1f c0
usb-storage: Bulk command S 0x43425355 T 0x3 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned -32 xferred 0/255
usb-storage: clearing endpoint halt for pipe 0xc0010280
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0122a0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: usb_stor_clear_halt: result=-110
usb-storage: usb_stor_transfer_partial(): unknown error
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: clearing endpoint halt for pipe 0xc0010280
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0122a0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: usb_stor_clear_halt: result=-110
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: clearing halt for pipe 0xc0010280
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0122a0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: usb_stor_clear_halt: result=-110
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0f0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1f0127c0)
1: [dfdab210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb-storage: Bulk soft reset failed -110
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface dfdc1660
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
NFS: NFSv3 not supported.
nfs warning: mount version older than kernel
NFS: NFSv3 not supported.
nfs warning: mount version older than kernel
NFS: NFSv3 not supported.
nfs warning: mount version older than kernel
NFS: NFSv3 not supported.
nfs warning: mount version older than kernel
NFS: NFSv3 not supported.
nfs warning: mount version older than kernel
NFS: NFSv3 not supported.
nfs warning: mount version older than kernel
NFS: NFSv3 not supported.
nfs warning: mount version older than kernel
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
host/uhci.c: root-hub INT complete: port1: 8a port2: 80 data: 2
host/uhci.c: ef80: suspend_hc
host/uhci.c: ef80: host controller halted. very bad
host/uhci.c: ef80: wakeup_hc
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 00:1f.2-1 address 2
usb-storage: storage_disconnect() called
usb-storage: -- releasing main URB
usb-storage: -- usb_unlink_urb() returned -19
usb.c: kusbd: /sbin/hotplug remove 2
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 88 port2: 80 data: 2
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 93 port2: 80 data: 2
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:1f.2-1, assigned address 3
usb.c: kmalloc IF d70a64e0, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb_control/bulk_msg: timeout
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1fdc16c0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=151ff3c0)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0f0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1fdc16c0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=151ff3c0)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 95
usb-storage: Array length appears to be: 97
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xd4e7dc74 Out: 0xd4e7dc60 Int: 0x00000000 (Period 0)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1fdc16c0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=151ff0c0)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0f0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1fdc16c0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=151ff0c0)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1fdc16c0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=151ff0c0)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
usb-storage: Found existing GUID 07abfccd0000000000000000
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
usb.c: usb-storage driver claimed interface d70a64e0
usb.c: kusbd: /sbin/hotplug add 3
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 8a port2: 80 data: 2
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 00:1f.2-1 address 3
usb-storage: storage_disconnect() called
usb-storage: -- releasing main URB
usb-storage: -- usb_unlink_urb() returned -19
usb.c: kusbd: /sbin/hotplug remove 3
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 88 port2: 80 data: 2
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 93 port2: 80 data: 2
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:1f.2-1, assigned address 4
usb.c: kmalloc IF dfdc1660, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb_control/bulk_msg: timeout
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170880)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0f0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170880)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 95
usb-storage: Array length appears to be: 97
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xd4b0a3b4 Out: 0xd4b0a3a0 Int: 0x00000000 (Period 0)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170780)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0f0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170780)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
host/uhci.c: uhci_result_control() failed with status 440000
[dfdaa0c0] link (1fdaa062) element (1fdab1e0)
0: [dfdab1e0] link (1fdab210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=128a44e0)
1: [dfdab210] link (1fdab240) e3 SPD Active Length=0 MaxLen=3 DT1 EndPt=0 Dev=4, PID=69(IN) (buf=16170780)
2: [dfdab240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=00000000)
usb.c: error getting string descriptor 0 (error=-110)
usb-storage: Found existing GUID 07abfccd0000000000000000
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
usb.c: usb-storage driver claimed interface dfdc1660
usb.c: kusbd: /sbin/hotplug add 4
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
|
If anyone has any ideas about what I'm missing, I'd very much like to hear them.
Thanks.
[/code] |
|
| Back to top |
|
 |
dsd
Developer
Joined: 30 Mar 2003
Posts: 2162
Location: nr London
|
| Posted: Thu May 20, 2004 10:06 pm Post subject: |
|
|
looks like the device is failing pretty soon after plug-in... i wouldnt say that you are missing anything
it might be worth trying a 2.6 kernel, as USB is more up-to-date over there
i'd suggest development-sources-2.6.6
_________________
http://dev.gentoo.org/~dsd |
|
| Back to top |
|
|
samuel.penn
Tux's lil' helper
Joined: 14 Dec 2003
Posts: 114
Location: UK
|
| Posted: Fri May 21, 2004 7:54 am Post subject: 2.6 upgrade |
|
|
| dsd wrote: | looks like the device is failing pretty soon after plug-in... i wouldnt say that you are missing anything
it might be worth trying a 2.6 kernel, as USB is more up-to-date over there
i'd suggest development-sources-2.6.6 |
Hmm... seems extreme. Can I switch between 2.4 and 2.6 kernels reasonably safely? Looking at the kernel compile docs for gentoo, 2.6 seems relatively straightforward. Is it just a case of building the new kernel, and sticking an option in Grub? Or are there other 'gotchas' in system configuration?
Do the NVIDIA drivers work under 2.6? I noticed X wouldn't start when I tried the 2.4.26 kernel (which I tried upgrading to to fix this problem), and I'm assuming that it's an NVIDIA issue. Does the NVIDIA module need a rebuild? (re-emerge the nvidia module?) |
|
| Back to top |
|
|
dsd
Developer
Joined: 30 Mar 2003
Posts: 2162
Location: nr London
|
| Posted: Fri May 21, 2004 10:40 am Post subject: Re: 2.6 upgrade |
|
|
| samuel.penn wrote: | | Hmm... seems extreme. Can I switch between 2.4 and 2.6 kernels reasonably safely? Looking at the kernel compile docs for gentoo, 2.6 seems relatively straightforward. Is it just a case of building the new kernel, and sticking an option in Grub? Or are there other 'gotchas' in system configuration? |
Pretty much. You can have kernel versions 2.4 and 2.6 on the same system, as different entries under grub. As for 2.6, the entire process is quite similar. Just *don't* copy over your 2.4 .config and use "make oldconfig", make sure that you configure it from scratch.
It doesnt matter if when you boot up to 2.6, something isnt working quite right. As long as you get to a console, you should be able to plug your USB disk in and see what happens, and save the dmesg output to a file.
| Quote: | | Do the NVIDIA drivers work under 2.6? I noticed X wouldn't start when I tried the 2.4.26 kernel (which I tried upgrading to to fix this problem), and I'm assuming that it's an NVIDIA issue. Does the NVIDIA module need a rebuild? (re-emerge the nvidia module?) |
Every time you change kernel, you need to re-merge the nvidia stuff. Thats normal. nvidia does work under 2.6 - but you should use the latest available - 1.0.5336-r3.
to get this, you can do:
| Code: | mkdir /etc/portage
echo "media-video/nvidia-kernel ~x86" >> /etc/portage/package.keywords
echo "media-video/nvidia-glx ~x86" >> /etc/portage/package.keywords |
the above is effectively telling portage to use the latest available in the testing branch for the nvidia stuff, as opposed to just looking in the "stable" branch.
_________________
http://dev.gentoo.org/~dsd |
|
| Back to top |
|
|
samuel.penn
Tux's lil' helper
Joined: 14 Dec 2003
Posts: 114
Location: UK
|
| Posted: Fri May 21, 2004 10:51 am Post subject: Re: 2.6 upgrade |
|
|
| dsd wrote: | | samuel.penn wrote: | | Hmm... seems extreme. Can I switch between 2.4 and 2.6 kernels reasonably safely? |
Pretty much. You can have kernel versions 2.4 and 2.6 on the same system, as different entries under grub. As for 2.6, the entire process is quite similar. Just *don't* copy over your 2.4 .config and use "make oldconfig", make sure that you configure it from scratch.
It doesnt matter if when you boot up to 2.6, something isnt working quite right. As long as you get to a console, you should be able to plug your USB disk in and see what happens, and save the dmesg output to a file.
|
Good. I'll give that a try when I get home then and see what happens.
Thanks for the pointers. |
|
| Back to top |
|
|
samuel.penn
Tux's lil' helper
Joined: 14 Dec 2003
Posts: 114
Location: UK
|
| Posted: Sat May 22, 2004 12:53 pm Post subject: Works under 2.6 |
|
|
I've now got 2.6 (sort of) working, and the USB drive works fine. Looks like I'm going to me moving to 2.6 sooner than I thought.
Thanks for the help. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
