| View previous topic :: View next topic |
| Author |
Message |
Manuelixm
l33t
Joined: 03 Apr 2004
Posts: 832
Location: Brescia
|
 Posted: Thu Jun 10, 2004 7:38 am Post subject: [UltraNooB]Il pc non si spegne[Risolto] |
 |
|
Ciao a tutti, oggi mi sa che è la giornata dei miei post problematici, ho installato la mia gentoo però quando scrivo halt nella console o eseguo un arresto da kde questo mi dà il bruttissimo "Power off".
Riporto parte del mio dmesg:
| Code: | Linux version 2.6.5-gentoo-r1 (root@carturo) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #6 Thu Jun 10 08:40:05 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hda3 video=vesafb:ywrap,mtrr vga=0x317
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 705.312 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 513972k/524224k available (2812k kernel code, 9468k reserved, 1019k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1380.35 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 40k freed
CPU: After generic identify, caps: 0183fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 704.0803 MHz.
..... host bus clock speed is 201.0372 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0
vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0a15
vesafb: pmi: set display start = c00c0a4e, set palette = c00c0ac4
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=8192
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
spurious 8259A interrupt: IRQ7.
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
udf: registering filesystem
Initializing Cryptographic API
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
Console: switching to colour frame buffer device 122x40
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AMD Irongate chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
lp0: using parport0 (polling).
parport_pc: Via 686A parallel port: io=0x378
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 14) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
hda: QUANTUM FIREBALLP KA18.2, ATA DISK drive
hdb: QUANTUM FIREBALL EX6.4A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 36094464 sectors (18480 MB) w/371KiB Cache, CHS=35808/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
hdb: max request size: 128KiB
hdb: 12594960 sectors (6448 MB) w/418KiB Cache, CHS=13328/15/63, UDMA(33)
/dev/ide/host0/bus0/target1/lun0: p1
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 9 for device 0000:00:04.2
PCI: Sharing IRQ 9 with 0000:00:04.3
PCI: Sharing IRQ 9 with 0000:00:10.0
uhci_hcd 0000:00:04.2: VIA Technologies, Inc. USB
uhci_hcd 0000:00:04.2: irq 9, io base 0000cc00
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:04.3
PCI: Sharing IRQ 9 with 0000:00:04.2
PCI: Sharing IRQ 9 with 0000:00:10.0
uhci_hcd 0000:00:04.3: VIA Technologies, Inc. USB (#2)
uhci_hcd 0000:00:04.3: irq 9, io base 0000d000
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
PCI: Found IRQ 5 for device 0000:00:0f.0
ALSA device list:
#0: Sound Blaster Live! (rev.8) at 0xc800, irq 5
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Couldn't find valid RAM disk image starting at 0.
found reiserfs format "3.6" with standard journal |
Ho già provato a ricompilare il kernel disabilitando l'ACPI e settando l'APM, ma il pc diventa instabile.
Qualcuno ha qualche soluzione?
Grazie ancora infinite.
Last edited by Manuelixm on Thu Jun 10, 2004 8:41 am; edited 1 time in total |
|
| Back to top |
|
 |
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Thu Jun 10, 2004 7:50 am Post subject: |
|
|
A occhio o devi settare qualcosa in APM/ACPI quando compili il kernel oppure il tuo hardware non é supportato completamente...
_________________
Ciao da me! |
|
| Back to top |
|
|
solka
Apprentice
Joined: 25 Jun 2003
Posts: 287
Location: Torino - ITA
|
| Posted: Thu Jun 10, 2004 7:51 am Post subject: |
|
|
Prova come ti dice lui, cioè
| Code: |
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
|
_________________
"The only reason of the man's sadness
is that he can't stay peacefully in his room."
Blaise Pascal |
|
| Back to top |
|
|
Manuelixm
l33t
Joined: 03 Apr 2004
Posts: 832
Location: Brescia
|
| Posted: Thu Jun 10, 2004 7:59 am Post subject: |
|
|
Il mio problema è che non so dove settare acpi=force, ho guardato il kernel e non ho trovato questa funzione.
Uso il gentoo-dev-sources 2.6.5-r1.
Grazie ancora e scusate la mia ignoranza. |
|
| Back to top |
|
|
kaio
Apprentice
Joined: 26 Aug 2003
Posts: 293
Location: Gorizia - IT
|
| Posted: Thu Jun 10, 2004 8:02 am Post subject: |
|
|
| Molto probabilmente nelle opzioni di boot di grub/lilo |
|
| Back to top |
|
|
solka
Apprentice
Joined: 25 Jun 2003
Posts: 287
Location: Torino - ITA
|
| Posted: Thu Jun 10, 2004 8:04 am Post subject: |
|
|
Devi impostarlo nel file di configurazione del tuo bootloader. Ad esempio se hai grub devi impostarlo così
/boot/grub/grub.conf
| Code: |
title=Gentoo 2.6.7-rc1_30-05-2004
root (hd0,0)
kernel (hd0,0)/boot/bzImage_2.6.7-rc1_30-05-2004 root=/dev/hda3 acpi=force
|
_________________
"The only reason of the man's sadness
is that he can't stay peacefully in his room."
Blaise Pascal |
|
| Back to top |
|
|
Cazzantonio
Bodhisattva
Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world
|
| Posted: Thu Jun 10, 2004 8:05 am Post subject: |
|
|
nel bootloader, (io uso grub) accanto alla riga dl kernel
ti posto la mia per fare un esempio
| Code: | title=Gentoo GNU/Linux 2.6.5-r1 (graphic)
root (hd0,1)
kernel /kernel-2.6.5-r1 root=/dev/hda4 4 video=vesa:ywrap,mtrr vga=0x317
|
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Thu Jun 10, 2004 8:05 am Post subject: |
|
|
| kaio wrote: | | Molto probabilmente nelle opzioni di boot di grub/lilo |
si, senza il molto probabilmente
più o meno dove sono specificate la root directory e le opzioni per video 
(dipende dal boot manager... cosa usi lilo o grub?)
| Code: |
Kernel command line: root=/dev/hda3 video=vesafb:ywrap,mtrr vga=0x317
|
_________________
Ciao da me! |
|
| Back to top |
|
|
Cazzantonio
Bodhisattva
Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world
|
| Posted: Thu Jun 10, 2004 8:05 am Post subject: |
|
|
cavolo quanto è veloce la gente a rispondere!
abbiamo postato quasi in contremporanea!
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne |
|
| Back to top |
|
|
Manuelixm
l33t
Joined: 03 Apr 2004
Posts: 832
Location: Brescia
|
| Posted: Thu Jun 10, 2004 8:12 am Post subject: |
|
|
Sì è vero, siete velocissimi e credo che questo sia uno dei forum migliori della rete.
X randomaze uso grub, ora provo ad aggiungere acpi=force nella riga che mi hai indicato, va bene? |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Thu Jun 10, 2004 8:23 am Post subject: |
|
|
| Manuelixm wrote: | | X randomaze uso grub, ora provo ad aggiungere acpi=force nella riga che mi hai indicato, va bene? |
Si, va bene, anche se per le prove consiglierei di fare una entry "testing" nel menu di grub... non si sa mai 
_________________
Ciao da me! |
|
| Back to top |
|
|
Manuelixm
l33t
Joined: 03 Apr 2004
Posts: 832
Location: Brescia
|
| Posted: Thu Jun 10, 2004 8:39 am Post subject: |
|
|
Perfetto, grazie a tutti, funziona alla perfezione.
Grazie mille anche per il consiglio dell'entry "testing", infatti dopo alcuni disagi, ora lascio sempre una conf. di test per le prove in grub. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
