View previous topic :: View next topic |
Author |
Message |
PLum Tux's lil' helper
Joined: 20 May 2004 Posts: 108 Location: /dev/world/poland/gliwice
|
Posted: Thu Jun 10, 2004 5:46 pm Post subject: |
|
|
PickledOnion wrote: | Uncomment the performance control option (just after firmware option I think). It's a new thing in the mm patch and is on by default. |
yes that was it - thx |
|
Back to top |
|
|
squeegy Guru
Joined: 13 Mar 2004 Posts: 321 Location: Cincinnati, OH
|
Posted: Thu Jun 10, 2004 5:46 pm Post subject: |
|
|
evermind wrote: | squeegy wrote: |
What exactly do I have to do to reverse this patch? Do I need to add a line to the ebuild? I ask this because looking at the patch it is wanting to look at linux-2.6.7-rc3-mm1 and when I try to `patch -R < reiser.....` it doesn't have any of those files to look at. So I am assuming I'm doing something wrong. |
to remove the reiser4patch
Code: |
cd /usr/src/linux-2.6.7-rc3-love1
bzcat /path/to/reiser4-2.6.7-rc3-mm1-2004.06.09.patch.bz2|patch -p1 -R
|
|
Code: |
mars /usr/src/linux/ # bzcat /usr/src/reiser4-2.6.7-rc3-mm1-2004.06.09.patch.bz2|patch -p1 -R
patching file arch/alpha/kernel/init_task.c
patching file arch/arm/kernel/init_task.c
patching file arch/arm26/kernel/init_task.c
patching file arch/cris/kernel/process.c
The next patch, when reversed, would delete the file arch/cris/kernel/process.c.orig,
which does not exist! Ignore -R? [n]
|
I am confused about this, what should I do? |
|
Back to top |
|
|
PrakashP Veteran
Joined: 27 Oct 2003 Posts: 1249 Location: C.C.A.A., Germania
|
Posted: Thu Jun 10, 2004 6:25 pm Post subject: |
|
|
@squeegy
Ignore. |
|
Back to top |
|
|
Peacefaker Tux's lil' helper
Joined: 07 Jan 2004 Posts: 117 Location: Vaasa, Finland
|
Posted: Thu Jun 10, 2004 6:28 pm Post subject: |
|
|
Hi, I get this
Code: |
In file included from drivers/ide/pci/siimage.c:34:
drivers/ide/pci/siimage.h:51: error: unknown field `vendor' specified in initializer
drivers/ide/pci/siimage.h:51: warning: initialization makes pointer from integer without a cast
drivers/ide/pci/siimage.h:52: error: unknown field `device' specified in initializer
drivers/ide/pci/siimage.h:52: warning: initialization makes pointer from integer without a cast
make[3]: *** [drivers/ide/pci/siimage.o] Error 1
make[2]: *** [drivers/ide/pci] Error 2
make[1]: *** [drivers/ide] Error 2
make: *** [drivers] Error 2
|
Ive checked and that part of the file is identical with the siimage.h from 2.6.6-rc3-love4. Also since I don't have a 3512 could I get away with just commenting it out ot something? |
|
Back to top |
|
|
squeegy Guru
Joined: 13 Mar 2004 Posts: 321 Location: Cincinnati, OH
|
Posted: Thu Jun 10, 2004 6:56 pm Post subject: |
|
|
Code: |
mars /usr/src/linux-2.6.7-rc3-love1/ # bzcat /usr/src/reiser4-2.6.7-rc3-mm1-2004.06.09.patch.bz2|patch -p1 -R
patching file arch/alpha/kernel/init_task.c
patching file arch/arm/kernel/init_task.c
patching file arch/arm26/kernel/init_task.c
patching file arch/cris/kernel/process.c
The next patch, when reversed, would delete the file arch/cris/kernel/process.c.orig,
which does not exist! Ignore -R? [n] y
patching file arch/cris/kernel/process.c.orig
patching file arch/h8300/kernel/init_task.c
patching file arch/i386/kernel/entry.S
Hunk #1 succeeded at 931 (offset 3 lines).
patching file arch/i386/kernel/entry.S.orig
Unreversed patch detected! Ignore -R? [n] y
Patch attempted to create file arch/i386/kernel/entry.S.orig, which already exists.
Hunk #1 FAILED at 1.
1 out of 1 hunk FAILED -- saving rejects to file arch/i386/kernel/entry.S.orig.rej
The next patch, when reversed, would delete the file arch/i386/kernel/entry.S.rej,
which does not exist! Ignore -R? [n]
|
is this legit? I have a feeling I am going to break something |
|
Back to top |
|
|
Jazz Guru
Joined: 16 Nov 2003 Posts: 543 Location: Melbourne, Australia
|
Posted: Thu Jun 10, 2004 7:01 pm Post subject: |
|
|
umm why not have the swuf2 patches in the love ? they are for hibernating stuff in linux ! i think they cud make a great addition..
Bye,
jazz _________________ In 2010, M$ Windows will be a quantum processing emulation layer for a 128-bit mod of a 64-bit hack of a 32-bit patch to a 16-bit GUI for an 8-bit operating system written for a 4-bit processor from a 2-bit company that can't stand 1 bit of competition. |
|
Back to top |
|
|
skion Tux's lil' helper
Joined: 18 Aug 2003 Posts: 99 Location: Amsterdam, Netherlands
|
Posted: Thu Jun 10, 2004 7:33 pm Post subject: advansys |
|
|
Anyone else having problems with the advansys driver in the latest -mm's? It's working fine in vanilla, but -love is unable to find any filesystem on the partitions
I see lots of changes in the advansys.c file, so i was wondering whether anyone else is seeing this? Nothing on lkml though _________________ - Skion |
|
Back to top |
|
|
DaMouse Apprentice
Joined: 18 Jul 2003 Posts: 233
|
Posted: Thu Jun 10, 2004 9:07 pm Post subject: |
|
|
Peacefaker wrote: | Hi, I get this
Code: |
In file included from drivers/ide/pci/siimage.c:34:
drivers/ide/pci/siimage.h:51: error: unknown field `vendor' specified in initializer
drivers/ide/pci/siimage.h:51: warning: initialization makes pointer from integer without a cast
drivers/ide/pci/siimage.h:52: error: unknown field `device' specified in initializer
drivers/ide/pci/siimage.h:52: warning: initialization makes pointer from integer without a cast
make[3]: *** [drivers/ide/pci/siimage.o] Error 1
make[2]: *** [drivers/ide/pci] Error 2
make[1]: *** [drivers/ide] Error 2
make: *** [drivers] Error 2
|
Ive checked and that part of the file is identical with the siimage.h from 2.6.6-rc3-love4. Also since I don't have a 3512 could I get away with just commenting it out ot something? |
mmm, go into the file and comment out the lines with .device and .vendor
now.. must laugh at oneofone cause I always have this fix mwuahhahahha
-DaMouse _________________ I am the dark lord DaMouse I eat souls and wear the dressing gown of evil. |
|
Back to top |
|
|
Peacefaker Tux's lil' helper
Joined: 07 Jan 2004 Posts: 117 Location: Vaasa, Finland
|
Posted: Thu Jun 10, 2004 10:47 pm Post subject: |
|
|
Anyone else had their nvidia go "boom"? I get garbled characters upon starting X with this kernel. |
|
Back to top |
|
|
tsr n00b
Joined: 03 Jun 2004 Posts: 47
|
Posted: Thu Jun 10, 2004 10:55 pm Post subject: |
|
|
Error when compiling:
Code: | arch/i386/kernel/built-in.o(.text+0xe4e7): In function `acpi_register_gsi':
: undefined reference to `mp_register_gsi'
make: *** [.tmp_vmlinux1] Error 1 |
ACPI is disabled in the kernel, any ideas? |
|
Back to top |
|
|
OneOfOne Guru
Joined: 28 May 2003 Posts: 368
|
Posted: Thu Jun 10, 2004 11:41 pm Post subject: |
|
|
DaMouse wrote: | Peacefaker wrote: | Hi, I get this
Code: |
In file included from drivers/ide/pci/siimage.c:34:
drivers/ide/pci/siimage.h:51: error: unknown field `vendor' specified in initializer
drivers/ide/pci/siimage.h:51: warning: initialization makes pointer from integer without a cast
drivers/ide/pci/siimage.h:52: error: unknown field `device' specified in initializer
drivers/ide/pci/siimage.h:52: warning: initialization makes pointer from integer without a cast
make[3]: *** [drivers/ide/pci/siimage.o] Error 1
make[2]: *** [drivers/ide/pci] Error 2
make[1]: *** [drivers/ide] Error 2
make: *** [drivers] Error 2
|
Ive checked and that part of the file is identical with the siimage.h from 2.6.6-rc3-love4. Also since I don't have a 3512 could I get away with just commenting it out ot something? |
mmm, go into the file and comment out the lines with .device and .vendor
now.. must laugh at oneofone cause I always have this fix mwuahhahahha
-DaMouse |
/me beats DaMouse with a winme CD
@Peacefaker using nvidia and it works fine, you need to disable regparm and 4k stacks.
@tsr you need to enable ACPI, looks like its broken in -mm
@jassi they just don't apply.
peace |
|
Back to top |
|
|
phlashback Tux's lil' helper
Joined: 27 Jul 2002 Posts: 142 Location: Normal
|
Posted: Fri Jun 11, 2004 4:04 am Post subject: |
|
|
Thanks OneOfOne
Reiser4 on / . I have only been running for a few minutes, but this love seemes to be much snappier than the last couple. Once again awsome job on the love _________________ The terrible thing about hell is that when you're there you can't even tell as you move through this life you love so you could be there and not even know |
|
Back to top |
|
|
XeonTux. n00b
Joined: 08 May 2004 Posts: 52
|
Posted: Fri Jun 11, 2004 4:12 am Post subject: |
|
|
tsr wrote: | Error when compiling:
Code: | arch/i386/kernel/built-in.o(.text+0xe4e7): In function `acpi_register_gsi':
: undefined reference to `mp_register_gsi'
make: *** [.tmp_vmlinux1] Error 1 |
ACPI is disabled in the kernel, any ideas? |
I got this too, with 2.6.7-rc3-mm1. Turning ACPI on resolves it for me. Tho we should not need to do this. And not all systems work well with ACPI in the kernel. Maybe getting rid of bk-acpi.patch is another solution, but I'm not sure how to do that and am too lazy to learn right now
see this message I found:
http://groups.google.com/groups?selm=232kU-2BV-53%40gated-at.bofh.it |
|
Back to top |
|
|
ejohnson Tux's lil' helper
Joined: 20 Jan 2004 Posts: 140
|
Posted: Fri Jun 11, 2004 5:42 am Post subject: |
|
|
Vector based interupts also is on the fritz. I can live with out it |
|
Back to top |
|
|
ryceck Apprentice
Joined: 13 Jan 2004 Posts: 195
|
Posted: Fri Jun 11, 2004 6:46 am Post subject: |
|
|
Well another lovely perfect kernel guyz.
Respect to this one cuz it runs like a charm as usual...aaaannnnnnddd WITH Reiser4!!
THnx OneOfOne (and the rest of the love-team of course ) |
|
Back to top |
|
|
luqas Guru
Joined: 02 Jan 2004 Posts: 588 Location: /US/Texas/Beaumont
|
Posted: Fri Jun 11, 2004 12:32 pm Post subject: |
|
|
It does feel snappier. I guess it is the mm scheduler maybe instead of nicks??? I recently switched from cfq to anticipitory so that might be the reason. Don't know if both are the reason, but anyway good work!!!! |
|
Back to top |
|
|
Evil Dark Archon Guru
Joined: 21 Dec 2002 Posts: 562 Location: Santa Rosa, CA
|
Posted: Fri Jun 11, 2004 6:00 pm Post subject: |
|
|
its the cpu scheduler change, because i notice a speed increase on both anticipatory and cfq. _________________ This post has been over explained for newb-informing purposes.
Registered Linux user 347334
Abit AV8-3rd eye, AMD Athlon64 3500+ 90nm, ATI Radeon x850 pro |
|
Back to top |
|
|
OneOfOne Guru
Joined: 28 May 2003 Posts: 368
|
Posted: Fri Jun 11, 2004 9:12 pm Post subject: |
|
|
everyone getting lock ups with reiser4 while the system is under heavy load try this :
renice -15 `pgrep hda1` (where hda1 is your reiser4 partition)
and please report back.
also dont renice your X with this release.
peace |
|
Back to top |
|
|
pestilence Apprentice
Joined: 05 Feb 2004 Posts: 213 Location: Athens / Greece
|
Posted: Fri Jun 11, 2004 9:40 pm Post subject: |
|
|
Ok here it goes for me... This are my issues:
1) Have a wacom volito and an Logitech optical mouse + keyboard hub with a 2.6.4 kernel everything works as it should be, with the 2.6.7-rc3-love1 it gets fucked up...i get /dev/input/mice and /dev/input/mouse0 and /dev/input/mouse1 but only my volito works ok...
2) Bootsplash is gone...there is only the menu tittle there...nada...
3) Booting with qingy just leaves the system hung...
Any ideas?
P.S Bootsplash is 0.6-r8 for some funny reason 0.6.1 wont work...i tested it with 2.6.4 and my mouse went crazy (maybe thats also the problem with issue 1 didn't test it on 2.6.7 after the downgrade) _________________ Gentoo the rising hope |
|
Back to top |
|
|
MrStaticVoid Tux's lil' helper
Joined: 25 Jul 2003 Posts: 114 Location: Maryland
|
Posted: Fri Jun 11, 2004 10:54 pm Post subject: |
|
|
Thanks for the lock-up tip. I was getting all sorts of lockups when compiling stuff. I didn't know what it was. Whatever that renice thing did seemed to fix the problem.
EDIT: Nevermind. It froze up on me during the merge of UT2004. |
|
Back to top |
|
|
silverpig Tux's lil' helper
Joined: 10 Dec 2003 Posts: 143 Location: Vancouver BC
|
Posted: Sat Jun 12, 2004 1:36 am Post subject: |
|
|
Nice. Got the 3.9.0-r1 ati drivers and REGPARM working with this kernel _________________ 'Cause I can. |
|
Back to top |
|
|
OneOfOne Guru
Joined: 28 May 2003 Posts: 368
|
Posted: Sat Jun 12, 2004 5:24 am Post subject: |
|
|
Mr. Static Void wrote: | Thanks for the lock-up tip. I was getting all sorts of lockups when compiling stuff. I didn't know what it was. Whatever that renice thing did seemed to fix the problem.
EDIT: Nevermind. It froze up on me during the merge of UT2004. |
that's weird, because afaik ut2k4 doesnt do much cpu usuge while emerging.
does it lock up while emerging glibc/coreutils/kde*?
peace |
|
Back to top |
|
|
Isaiah Guru
Joined: 25 Feb 2003 Posts: 359
|
Posted: Sat Jun 12, 2004 5:29 am Post subject: |
|
|
I myself am feeling pretty good about this one - forcedeth worked out of the box and everything just plain feels better |
|
Back to top |
|
|
OneOfOne Guru
Joined: 28 May 2003 Posts: 368
|
|
Back to top |
|
|
boroshan l33t
Joined: 16 Apr 2003 Posts: 730 Location: upside down
|
Posted: Sat Jun 12, 2004 2:45 pm Post subject: working, more or less |
|
|
working here. the new r4 seems to work, bootsplash is working, nvidia is ok...
The only thing that isn't working, and this is an odd one, is Qingy. Instead of launching the app, I get an empty framebuffer console with a blinking cursor. It won't let me change to VT6 either, which hosts an old fashioned agetty.
On the other hand if I boot without the framebuffer, while qingy still won't work, I can at least switch consoles and log in normally.
Apart from that, everything works nicely _________________ Don't let THEM immanentize the Eschaton! |
|
Back to top |
|
|
|