[RISOLTO] la rete non funziona

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

ciao a tutti!
è la prima volta che posto qua, mi sono appena avvicinato a gentoo, non mi spennate vero?

ho preso l'handbook e ho cominciato a seguirlo per l'installazione, solo che la rete non funziona. quale sia l'errore preciso non so, ma per quel che ci ho capito io (che so molto poco di reti) mi dice "no route to host" quando cerco di pingare il gateway

qualche dettaglio:
mio ip 10.24.1.2
gateway 10.24.1.1
netmask 255.255.255.252

la scheda funziona correttamente, ho fatto ifconfig ed è tutto a posto o almeno sembra. ho dato route come dice nell'handbook e anche lì sembra tutto a posto. infatti se confronto l'output di route -n su gentoo e sulla suse che ho già installato scopro che sono esattamente uguali. sulla suse però tutto funziona, mentre su gentoo no

c'è da dire che non so neanche bene quali test fare per scovare il problema. mi sono pingato e va, ma se pingo il gateway niente da fare.

avete qualche idea?
grazie mille!
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

marco86 · Posted: Mon Jul 26, 2004 12:21 pm Post subject:

posta magare l'output di

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

vado a memoria:

10.24.1.0 0.0.0.0 255.255.255.252
127.0.0.0 127.0.0.1 255.0.0.0
0.0.0.0 10.24.1.1 255.255.255.252

resolv.conf è:
nameserver 81.88.224.129
nameserver 81.88.224.130

che sono i server che mi sono stati assegnati dall'isp
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

motaboy · Retired Dev Joined: 15 Dec 2003 Posts: 1483

Ma precisamente come é il tuo collegamento ad internet?

Posta anche l'output di ifconfig.
_________________
...

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

sono su fibra ottica e dovrebbe esserci nat da quel che ho capito

ifconfig ho fatto così:
ifconfig eth0 10.24.1.2 broadcast 10.24.1.3 netmask 255.255.255.252 up

se faccio ifconfig eth0 mi ridice le stesse cose, però preciso preciso non so perchè non ce l'ho davanti

_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

motaboy · Retired Dev Joined: 15 Dec 2003 Posts: 1483

ma hai provato a pingare qualche sito invece del gateway?

sicuro che hai un ip fisso e non devi usare il dhcp?
_________________
...

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

sìsìsì l'ip è fisso
se pingo all'esterno mi dà host sconosciuto
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

motaboy · Retired Dev Joined: 15 Dec 2003 Posts: 1483

Te lo fa da root o solo da utente?
Hai provato con l'indirizzo ip invece che col nome?
_________________
...

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

da utente non ho neanche provato, facevo da root perchè stavo installando.
dici l'ip invece del nome di un sito esterno? no solo col nome
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

motaboy · Retired Dev Joined: 15 Dec 2003 Posts: 1483

Se con l'ip di un sito esterno funziona allora é un problema di DNS, sei sicuro che /etc/resolv.conf sia corretto?
_________________
...

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

proverò con l'ip esterno
i dns dovrebbero funzionare, la sintassi del file è quella no?
nameserver ip
forse bisogna far partire uno script dopo aver messo i dns? cmq sia da qui che dalla suse funzionano..
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

gli output esatti che ottengo sono questi:

--- ifconfig ---
eth0 Link encap:Ethernet HWaddr 00:40:63:C3:1B:5B
inet addr:10.24.1.2 Bcast:10.24.1.3 Mask:255.255.255.252
inet6 addr: fe80::240:63ff:fec3:1b5b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:8 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0xd000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:53 errors:0 dropped:0 overruns:0 frame:0
TX packets:53 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5222 (5.0 Kb) TX bytes:5222 (5.0 Kb)

--- ping al mio ip ---
64 bytes from 10.24.1.2: icmp_seq=1 ttl=64 time=0.022 ms
64 bytes from 10.24.1.2: icmp_seq=2 ttl=64 time=0.005 ms
64 bytes from 10.24.1.2: icmp_seq=3 ttl=64 time=0.005 ms
64 bytes from 10.24.1.2: icmp_seq=4 ttl=64 time=0.006 ms

--- ping al gateway e a qualunque altro host esterno compresi i dns ---
From 10.24.1.2 icmp_seq=1 Destination Host Unreachable
From 10.24.1.2 icmp_seq=2 Destination Host Unreachable
From 10.24.1.2 icmp_seq=3 Destination Host Unreachable
From 10.24.1.2 icmp_seq=4 Destination Host Unreachable

--- route -n ---
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.24.1.0 0.0.0.0 255.255.255.252 U 0 0 0 eth0
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 10.24.1.1 0.0.0.0 UG 0 0 0 eth0

--- wget www.google.it ---
--16:15:04-- http://www.google.it/
=> `index.html'
Resolving www.google.it... eth0: Transmit timed out, status 0003, PHY status 786d, resetting...

che posso fare? :cry:

_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

motaboy · Retired Dev Joined: 15 Dec 2003 Posts: 1483

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

cavi ecc. tutto a posto, infatti adesso va
dmesg l'ho dimenticato! ma quando lo devo fare di preciso?
il modulo comunque dovrebbe essere giusto, ho la eth integrata nella mobo via, e ho caricato il modulo via-rhine
andrò a fare un dmesg

_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

randomaze · Bodhisattva Joined: 21 Oct 2003 Posts: 9985

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

ahia, allora
che fosse difficile pingare fuori, ok
x quanto riguarda il collegamento non sono molto sicuro xkè ci capisco pochino, cmq è fatto così:
dalla eth esce cavo (che però non so dirti se è cross) che va in uno scatolotto dal quale parte la fibra ottica. non so se è quello scatolotto il gateway

di hub o switch comunque non c'è traccia qua, visto che lo scatolotto ha una sola entrata ho dei forti dubbi che sia un hub.
l'ip del gateway sì sono sicuro, me l'hanno dato i tizi dell'isp, e con windows e suse funziona
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

randomaze · Bodhisattva Joined: 21 Oct 2003 Posts: 9985

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

sì stavo facendo tutto a mano
proverò anche quel tool, non sapevo ci fosse. avevo provato solo net-setup, perchè ne parla nel manuale
provo e farò sapere, grazie mille

_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

randomaze · Bodhisattva Joined: 21 Oct 2003 Posts: 9985

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

giàgià
sono in fase d'installazione, si poteva fare da un'altra distro già installata, sigh, però mi piaceva provare un'installazione di gentoo dall'inizio fino alla fine

_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

motaboy · Retired Dev Joined: 15 Dec 2003 Posts: 1483

Resta il fatto che per me la causa sono quegli errori che hai riportato. Se posti il dmesg quando vedi che ci sono stati questi errori magari capiamo qualcosa. Potrebbe per esempio essere un problema di interrupt/ACPI/APIC
_________________
...

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

scusate la niubbità, gli errori erano quelli che ottenevo quando pingavo il gateway vero? allora appena posso riprovo e poi dò un dmesg. vi faccio sapere!
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

adarkar · n00b Joined: 26 Jul 2004 Posts: 59 Location: Cremona, IT

dunque se ho capito giusto: ho pingato il gateway, lui mi dà errore, io faccio dmesg e questo è l'output:

Linux version 2.4.25-gentoo (root@gandalf) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 Sun Apr 18 11:24:57 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
found SMP MP-table at 000f4cd0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 VIAP4X ) @ 0x000f67d0
ACPI: RSDT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6d00
ACPI: DSDT (v001 VIAP4X AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI BALANCE SET
Using ACPI (MADT) for SMP configuration information
Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zisofs cdroot vga=0x317 splash=silent BOOT_IMAGE=gentoo
bootsplash: silent mode.
Initializing CPU#0
Detected 2405.510 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 4797.23 BogoMIPS
Memory: 512192k/524224k available (2341k kernel code, 11644k reserved, 335k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Proc Config support by ptb@it.uc3m.es
proc config counted 6583 bytes in names
proc config counted 729 bytes in value handles
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2405.5469 MHz.
..... host bus clock speed is 133.6412 MHz.
cpu: 0, clocks: 1336412, slice: 668206
CPU0<T0:1336400,T1:668192,D:2,S:668206,C:1336412>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040116
PCI: PCI BIOS revision 2.10 entry at 0xfb1e0, last bus=1
PCI: Using configuration type 1
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20)
ACPI: PCI Interrupt Link [ALKB] (IRQs 21)
ACPI: PCI Interrupt Link [ALKC] (IRQs 22)
ACPI: PCI Interrupt Link [ALKD] (IRQs 23)
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Using IRQ router default [1106/3168] at 00:00.0
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 1!
PCI BIOS passed nonexistent PCI bus 0!
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
SGI XFS with realtime, tracing, debug enabled
SGI XFS Quota Management subsystem
vesafb: framebuffer at 0xd8000000, mapped to 0xe09df000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f6d0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture..... silenjpeg size 68324 bytes, found (1024x768, 19719 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 122x43
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
toshiba: not a supported Toshiba laptop
i8k: not running on a Dell system
i8k: vendor=VIA TECHNOLOGIES, INC., model=P4X400-8235, version=6.00
i8k: unable to get SMM Dell signature
i8k: unable to get SMM BIOS version
Serial driver version 5.05c (2001-07-0

with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simon@ncm.com)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: Maxtor 2B020H1, ATA DISK drive
blk: queue c017f720, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c017f85c, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63, UDMA(133)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 p6 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1908k freed
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 9, pci mem e0e95000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xdc00, IRQ 5
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
sbp2: $Rev: 1074 $ Ben Collins <bcollins@debian.org>
hub.c: new USB device 00:10.0-2, assigned address 2
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:10.0-2, assigned address 3
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)
inserting floppy driver for 2.4.25-gentoo
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Looking for splash picture.... found (1024x768, 19719 bytes, v3).
Splash status on console 0 changed to on
Looking for splash picture.... found (1024x768, 19719 bytes, v3).
Splash status on console 1 changed to on
Looking for splash picture.... found (1024x768, 19719 bytes, v3).
Splash status on console 2 changed to on
Looking for splash picture.... found (1024x768, 19719 bytes, v3).
Splash status on console 3 changed to on
Looking for splash picture.... found (1024x768, 19719 bytes, v3).
Splash status on console 4 changed to on
Looking for splash picture.... found (1024x768, 19719 bytes, v3).
Splash status on console 5 changed to on
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6105M Rhine-III at 0xd000, 00:40:63:c3:1b:5b, IRQ 5.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 4181.
eth0: Setting full-duplex based on MII #1 link partner capability of 4181.
eth0: no IPv6 routers present
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: Setting full-duplex based on MII #1 link partner capability of 4181.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: Setting full-duplex based on MII #1 link partner capability of 4181.
_________________
@_=(115,-17,6);print+map{chr$_[$.=$_-$_]*$_**$.+++$_[$.]*$_**$.+++$_[$.]*$_**$.}$.-$...$#_

ema · Guru Joined: 27 Aug 2003 Posts: 380

----> NETDEV WATCHDOG: eth0: transmit timed out

indica un chiaro problema hardware, probabilmente l'irq è condiviso da qualche altra periferica che non supporta irq sharing. prova a disabilitare acpi e apic dando al kernel le opzioni all'avvio

motaboy · Retired Dev Joined: 15 Dec 2003 Posts: 1483

Se non funziona puoi anche provare ad usare un kernel piú recente. Mi sa che con la gentoo 2004.1 il kernel smp era un 2.6.
_________________
...