| View previous topic :: View next topic |
| Author |
Message |
The_Fallen
n00b
Joined: 11 Sep 2004
Posts: 64
Location: Göttingen DE
|
 Posted: Sat Oct 23, 2004 12:31 pm Post subject: Streifen unter X |
 |
|
Hi,
ich bin grad dabei, Gentoo auch auf meinem Laptop (ThinkPad R51) zu installieren, mit X hab ich aber so meine Probleme. Es startet zwar, aber ich hab unschöne Streifen auf dem Bildschirm und der Mauszeiger ist einfaches nur ein rechteckiges Farbmuster....
Hat einer ne Idee, wo das Problem liegen könnte?
thx,
fallen |
|
| Back to top |
|
 |
loki99
Advocate
Joined: 10 Oct 2003
Posts: 2056
Location: Vienna, €urope
|
| Posted: Sat Oct 23, 2004 1:18 pm Post subject: Re: Streifen unter X |
|
|
| The_Fallen wrote: | Hi,
ich bin grad dabei, Gentoo auch auf meinem Laptop (ThinkPad R51) zu installieren, mit X hab ich aber so meine Probleme. Es startet zwar, aber ich hab unschöne Streifen auf dem Bildschirm und der Mauszeiger ist einfaches nur ein rechteckiges Farbmuster....
Hat einer ne Idee, wo das Problem liegen könnte?
thx,
fallen |
gib uns bitte etwas mehr infos!
# welche grafikkarte hast du?
# welchen treiber verwendest du?
# welche WM/DE verwendest du (kde/gnome/....)
# kannst du deine xorg.conf posten? |
|
| Back to top |
|
|
The_Fallen
n00b
Joined: 11 Sep 2004
Posts: 64
Location: Göttingen DE
|
| Posted: Sat Oct 23, 2004 3:46 pm Post subject: Re: Streifen unter X |
|
|
| loki99 wrote: |
gib uns bitte etwas mehr infos!
|
Ups, sorry, das ging wohl irgendwie zu schnell...
| loki99 wrote: |
# welche grafikkarte hast du?
|
Mobility Radeon 9000
| loki99 wrote: |
# welchen treiber verwendest du?
|
Ich benutz den Generic Radeon-Treiber, der bei xorg-x11 6.8.0-r1 dabei ist. ati-drivers will nen älteren x11 6.7 emergen, also hab ich das erstmal gelassen.
| loki99 wrote: |
# welche WM/DE verwendest du (kde/gnome/....)
|
Den WM, der standardmäßig mitinstalliert wird, ist glaub ich der TWM, oder? KDE emerge ich erst, wenn X soweit läuft...
| loki99 wrote: |
# kannst du deine xorg.conf posten?
|
Klar, hier:
| Code: |
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "de"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 60
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
|
Wär klasse, wenn da einer weiter weiß. |
|
| Back to top |
|
|
Louisdor
Veteran
Joined: 14 Dec 2003
Posts: 1231
Location: im Brandenburgischen
|
| Posted: Sat Oct 23, 2004 4:00 pm Post subject: |
|
|
Hi!
Du hast da 2 x Section "Device" drin. Mit Identifier und Driver.
Nimm die mit vga mal raus.
Viellicht ist da 1 x zu viel? Ich hab es jedenfalls so nicht, auch wenn ich keine ATI Card habe. ...
_________________
"Ich bin ich." |
|
| Back to top |
|
|
The_Fallen
n00b
Joined: 11 Sep 2004
Posts: 64
Location: Göttingen DE
|
| Posted: Sat Oct 23, 2004 4:32 pm Post subject: |
|
|
Hmm, daran lags nicht, hat zumindest keinen Unterschied gemacht... Aus Frust hab ich einfach mal nen paar mal neu gestartet und plötzlich gings. Und ich dachte, sowas funzt nur bei Windows...  |
|
| Back to top |
|
|
loki99
Advocate
Joined: 10 Oct 2003
Posts: 2056
Location: Vienna, €urope
|
| Posted: Sat Oct 23, 2004 4:49 pm Post subject: |
|
|
| NovaleX wrote: | Hi!
Du hast da 2 x Section "Device" drin. Mit Identifier und Driver.
Nimm die mit vga mal raus.
Viellicht ist da 1 x zu viel? Ich hab es jedenfalls so nicht, auch wenn ich keine ATI Card habe. ... |
das ist eigentlich normal. meine ati config hat auch beide treiber aktiv. |
|
| Back to top |
|
|
loki99
Advocate
Joined: 10 Oct 2003
Posts: 2056
Location: Vienna, €urope
|
| Posted: Sat Oct 23, 2004 4:54 pm Post subject: |
|
|
| The_Fallen wrote: | | Hmm, daran lags nicht, hat zumindest keinen Unterschied gemacht... Aus Frust hab ich einfach mal nen paar mal neu gestartet und plötzlich gings. Und ich dachte, sowas funzt nur bei Windows... |
was heißt | Quote: | | .... und plötzlich gings. |
hast du schon einen WM aufgesetzt? ich benutze xorg-6.7.0-r2 weil direct rendering mit ati unter xorg-6.8.0 nicht funzt! |
|
| Back to top |
|
|
mrsteven
Veteran
Joined: 04 Jul 2003
Posts: 1938
|
| Posted: Sat Oct 23, 2004 8:38 pm Post subject: |
|
|
Benutzt du einen Framebuffer? Der kann in Verbindung mit X Probleme machen.
_________________
Unix philosophy: "Do one thing and do it well."
systemd: "Do everything and do it wrong." |
|
| Back to top |
|
|
The_Fallen
n00b
Joined: 11 Sep 2004
Posts: 64
Location: Göttingen DE
|
| Posted: Sun Oct 24, 2004 1:28 pm Post subject: |
|
|
loki99: Naja, plötzlich keine Bildfehler mehr...
mrseven: ja, ich benutze nen Framebuffer |
|
| Back to top |
|
|
mrsteven
Veteran
Joined: 04 Jul 2003
Posts: 1938
|
| Posted: Sun Oct 24, 2004 4:49 pm Post subject: |
|
|
| The_Fallen wrote: | | mrseven: ja, ich benutze nen Framebuffer |
Na dann bei den nächsten Problemen weg damit...
_________________
Unix philosophy: "Do one thing and do it well."
systemd: "Do everything and do it wrong." |
|
| Back to top |
|
|
The_Fallen
n00b
Joined: 11 Sep 2004
Posts: 64
Location: Göttingen DE
|
| Posted: Sun Oct 24, 2004 4:58 pm Post subject: |
|
|
| ok, danke |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
