| View previous topic :: View next topic |
| Author |
Message |
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
 Posted: Tue Dec 28, 2004 3:04 pm Post subject: nvidia and tft problems [SOLVED] |
 |
|
Hello to everybody.
I've got some problems with nvidia driver and a belinea tft monitor.
Here my system specs
xorg-x11 6.8.0 r3
nvidia-kernel 1.0.6111-r3
nvidia-glx 1.0.6111
monitor: belinea 101715 (tft 17", maximum resolution of 1280x1024 and hsync 31-81, vsync 56-75)
video-card: nvidia geForce FX5200 128 MB
I installed nvidia driver following the online howto and run
to get a xorg.conf built on my system.
Then I run
and cut and paste my monitor modelines to the xorg.conf into the Monitor Device section.
| Code: |
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "glx"
Load "dbe"
# Load "dri"
Load "extmod"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "AutoRepeat" "500 30"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
Option "NvAGP" "1" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
#Option "TVOverScan" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
#Option "AllowDFPStereo" # [<bool>]
#Option "XvMCUsesTextures" # [<bool>]
#Option "HorizSync" # <str>
#Option "VertRefresh" # <str>
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
When I run the X-server I get no answer. The keyboard still works (caps-lock and num-lock lights turn on and off) but I can't kill X through ctrl-alt-backspace or change tty through ctrl+alt+F*. I can still reboot by ctr+alt+can or kill X by ssh remote connection.
The end of the resultant Xorg.0.log is
| Code: |
(II) NVIDIA(0): Monitor0: Using default hsync range of 31.00-83.00 kHz
(II) NVIDIA(0): Monitor0: Using default vrefresh range of 56.00-75.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz
(II) NVIDIA(0): Not using mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(WW) (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,Monitor0) mode clock 175.5MHz exceeds DDC maximum 140MHz
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(WW) (1792x1344,Monitor0) mode clock 204.8MHz exceeds DDC maximum 140MHz
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
(WW) (1400x1050,Monitor0) mode clock 155.8MHz exceeds DDC maximum 140MHz
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(WW) NVIDIA(0): Not using mode "1792x1344" (width 1792 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1280)
(WW) NVIDIA(0): Not using mode "1600x1200" (width 1600 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1280)
(WW) NVIDIA(0): Not using mode "1600x1200" (width 1600 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1280)
(WW) NVIDIA(0): Not using mode "1400x1050" (width 1400 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1280)
(WW) NVIDIA(0): Not using mode "1400x1050" (width 1400 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1280)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(**) NVIDIA(0): Mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (340, 280) mm
(--) NVIDIA(0): DPI set to (95, 92)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(WW) NVIDIA(0): OpenGL is only supported in depths 16 and 24
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[1] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[8] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[9] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[B]
[10] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[11] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[B]
[12] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000ef90 - 0x0000ef9f (0x10) IX[B]
[21] -1 0 0x0000efe0 - 0x0000efe3 (0x4) IX[B]
[22] -1 0 0x0000efa8 - 0x0000efaf (0x8) IX[B]
[23] -1 0 0x0000efe4 - 0x0000efe7 (0x4) IX[B]
[24] -1 0 0x0000eff0 - 0x0000eff7 (0x8) IX[B]
[25] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[26] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
[27] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[28] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1280x1024"
|
while with the nv generic driver I get
| Code: |
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xe8000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Buttons" "5"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
SetClientVersion: 0 8
|
Can anyone help me please.
Thank you in advance.
jvlik
Last edited by jvlik on Fri Jun 17, 2005 12:29 pm; edited 1 time in total |
|
| Back to top |
|
 |
hjnenc
Veteran
Joined: 15 Aug 2004
Posts: 1599
Location: Vienna, Austria
|
| Posted: Tue Dec 28, 2004 5:15 pm Post subject: |
|
|
Don't know if this solves your problem, but you don't need to specify the ModeLines with the NVIDIA driver. The only things I have in my Monitor section is
| Code: | Section "Monitor"
Identifier "SM 171N"
HorizSync 31.5 - 64.3
VertRefresh 60
EndSection
|
You can adapt the values to the specifications of your monitor. |
|
| Back to top |
|
|
rmh3093
Advocate
Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY
|
| Posted: Tue Dec 28, 2004 5:34 pm Post subject: |
|
|
yeah I dont know why you are trying to use modelines, but when I use
Xorg -configure, afterwards I still have to add vertrefresh and horizsync options to the monitor and a default depth to the screen section, then the EDID specified modes should work
_________________
Do not meddle in the affairs of wizards, for they are subtle and quick to anger. |
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Tue Dec 28, 2004 7:06 pm Post subject: |
|
|
You are right. I tried to specify only hsync and vref but it didn't work so I thought it was a problem of freq on my monitor and so I wnto through modelines. It still doesn't work.
Which is the problem?
Thanks
jvlik |
|
| Back to top |
|
|
kenyon
Apprentice
Joined: 23 Dec 2004
Posts: 155
Location: Southern California
|
| Posted: Tue Dec 28, 2004 10:06 pm Post subject: |
|
|
I've got the same video card and a Samsung SyncMaster 192N 19-inch LCD screen that does 1280x1024 also, so my setup sounds similar to yours. Here is my xorg.conf:
| Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/corefonts/"
#FontPath "/usr/share/fonts/fontsfromXP/"
EndSection
Section "Module"
Load "dbe"
#Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
#Option "Protocol" "Auto"
Option "Device" "/dev/input/mouse0"
Option "Buttons" "7"
Option "ZAxisMapping" "6 7"
EndSection
Section "Monitor"
#DisplaySize 380 310 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
#HorizSync 12594.0 - 0.0
VertRefresh 56.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" "True" # [<bool>]
#Option "FPDither" "True" # [<bool>]
#Option "CrtcNumber" # <i>
Identifier "Card0"
Driver "nvidia"
VideoRam 131072
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection |
Only thing is that I'm using different (newer) software versions than you. I'm running:
xorg-x11 6.8.1.901
nvidia-kernel 1.0.6629-r1
nvidia-glx 1.0.6629
kernel 2.6.9-cko3
Hope this helps. |
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Tue Dec 28, 2004 11:01 pm Post subject: |
|
|
Thank you for your kind help. Could you post your Xorg.0.log please?
Thanks again
jvlik |
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Tue Dec 28, 2004 11:10 pm Post subject: |
|
|
Same problem also copying your xorg.conf.
I don't understand why it stops.
I hope someone can clear it.
Thanks
jvlik |
|
| Back to top |
|
|
hjnenc
Veteran
Joined: 15 Aug 2004
Posts: 1599
Location: Vienna, Austria
|
| Posted: Wed Dec 29, 2004 6:04 am Post subject: |
|
|
| Please double check that nvidia-kernel and nvidia-glx have the same version and that the nvidia kernel module is loaded. |
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Wed Dec 29, 2004 10:39 am Post subject: |
|
|
| Code: |
# lsmod | grep nvidia
nvidia 4816020 0
|
| Code: |
* media-video/nvidia-glx
Latest version available: 1.0.6111
Latest version installed: 1.0.6111
Size of downloaded files: 15,138 kB
Homepage: http://www.nvidia.com/
Description: NVIDIA X11 driver and GLX libraries
License: NVIDIA
* media-video/nvidia-kernel
Latest version available: 1.0.6111-r3
Latest version installed: 1.0.6111-r3
Size of downloaded files: 15,138 kB
Homepage: http://www.nvidia.com/
Description: Linux kernel module for the NVIDIA X11 driver
License: NVIDIA
* media-video/nvidia-settings
Latest version available: 1.0.6111
Latest version installed: 1.0.6111
Size of downloaded files: 720 kB
Homepage: http://www.nvidia.com/
Description: NVIDIA Linux X11 Settings Utility
License: GPL-2
|
Is it ok?
I don't know what to do!
Thanks
jvlik |
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Wed Dec 29, 2004 9:30 pm Post subject: |
|
|
I don't know why but it works.
I've recompiled my kernel (without any change in it), reemerged nvidia-kernel and -glx, modified lilo inserting vga=0x317 and splash=verbose and removing alpic, modified xorg.conf inserting NvAGP 0.
Too many things toghether and now I don't know which solved the problem.
I'm on a remote host but now Xorg.0.log is fine and glxinfo and glxgears seem to work.
Are they ok?
| Code: |
$ glxinfo
name of display: localhost:11.0
display: localhost:11 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: NVIDIA Corporation
client glx version string: 1.3
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
OpenGL extensions:
GL_EXT_blend_color, GL_ARB_multitexture, GL_EXT_blend_minmax,
GL_ARB_imaging
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 1 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 1 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 1 24 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 1 24 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 1 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 1 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 1 24 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 1 24 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
|
| Code: |
$ glxgears
2066 frames in 6.0 seconds = 344.333 FPS
585 frames in 5.0 seconds = 117.000 FPS
455 frames in 6.0 seconds = 75.833 FPS
520 frames in 7.0 seconds = 74.286 FPS
520 frames in 5.0 seconds = 104.000 FPS
716 frames in 5.0 seconds = 143.200 FPS
X connection to localhost:11.0 broken (explicit kill or server shutdown).
|
Thank you. Now I'll try to understand why now it works!
Bye
Last edited by jvlik on Wed Dec 29, 2004 9:35 pm; edited 1 time in total |
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Wed Dec 29, 2004 9:35 pm Post subject: |
|
|
ok it was NvAGP. What is it? Why it must be set to 0?
Thanks again
jvlik |
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Wed Dec 29, 2004 9:52 pm Post subject: |
|
|
is it fine?
| Code: |
# cat /proc/driver/nvidia/version
NVRM version: NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004
GCC version: gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)
# cat /proc/driver/nvidia/cards/0
Model: GeForce FX 5200
IRQ: 16
Video BIOS: ??.??.??.??.??
Card Type: AGP
# cat /proc/driver/nvidia/agp/card
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f000e1b:0x00000000
# cat /proc/driver/nvidia/agp/host-bridge
Host Bridge: Silicon Integrated Systems [SiS] 655 Host
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f004e1b:0x00000000
# cat /proc/driver/nvidia/agp/status
Status: Disabled
|
Why Video BIOS is ??.??.??.??.?? ?
Why agp status is Disabled?
Thanks
jvlik |
|
| Back to top |
|
|
hjnenc
Veteran
Joined: 15 Aug 2004
Posts: 1599
Location: Vienna, Austria
|
| Posted: Thu Dec 30, 2004 6:11 am Post subject: |
|
|
| Quote: | OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4 |
you don't use the NVIDIA glx drivers at the moment. To enable them do
| Code: | | opengl-update nvidia |
This should also increase the FPS rate in glxgears. If that does not work, you can switch back with
| Code: | | opengl-update xorg-x11 |
|
|
| Back to top |
|
|
jvlik
n00b
Joined: 22 Dec 2004
Posts: 35
|
| Posted: Tue Jan 04, 2005 8:33 am Post subject: |
|
|
Since I was working via ssh, I posted the output of my local pc even if I launched glxinfo, glxgears from the remote host. The right output is:
| Code: |
$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.3
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_multisample, GLX_NV_float_buffer
client glx vendor string: NVIDIA Corporation
client glx version string: 1.3
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_multisample, GLX_NV_float_buffer, GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce FX 5200/PCI/SSE2
OpenGL version string: 1.5.1 NVIDIA 61.11
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr,
GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array,
GL_EXT_Cg_shader, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_paletted_texture,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_two_side,
GL_EXT_stencil_wrap, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
GL_HP_occlusion_test, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_KTX_buffer_region, GL_NV_blend_square,
GL_NV_copy_depth_to_color, GL_NV_depth_clamp, GL_NV_fence,
GL_NV_float_buffer, GL_NV_fog_distance, GL_NV_fragment_program,
GL_NV_fragment_program_option, GL_NV_half_float, GL_NV_light_max_exponent,
GL_NV_multisample_filter_hint, GL_NV_occlusion_query,
GL_NV_packed_depth_stencil, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_primitive_restart, GL_NV_register_combiners,
GL_NV_register_combiners2, GL_NV_texgen_reflection,
GL_NV_texture_compression_vtc, GL_NV_texture_env_combine4,
GL_NV_texture_expand_normal, GL_NV_texture_rectangle,
GL_NV_texture_shader, GL_NV_texture_shader2, GL_NV_texture_shader3,
GL_NV_vertex_array_range, GL_NV_vertex_array_range2, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_NV_vertex_program2,
GL_NV_vertex_program2_option, GL_SGIS_generate_mipmap,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SUN_slice_accum
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 32 0 r y . 8 8 8 0 0 24 8 16 16 16 16 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 0 0 24 8 16 16 16 16 0 0 None
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 0 0 24 8 16 16 16 16 0 0 None
0x25 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r y . 8 8 8 0 0 16 0 16 16 16 16 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 16 0 16 16 16 16 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 0 0 16 0 16 16 16 16 0 0 None
0x29 24 tc 0 32 0 r . . 8 8 8 8 0 16 0 16 16 16 16 0 0 None
0x2a 24 tc 0 32 0 r y . 8 8 8 0 0 0 0 16 16 16 16 0 0 None
0x2b 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 None
0x2c 24 tc 0 32 0 r . . 8 8 8 0 0 0 0 16 16 16 16 0 0 None
0x2d 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 None
0x2e 24 tc 0 32 0 r y . 8 8 8 0 0 24 8 16 16 16 16 2 1 Ncon
0x2f 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 2 1 Ncon
0x30 24 tc 0 32 0 r y . 8 8 8 0 0 24 8 16 16 16 16 4 1 Ncon
0x31 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 4 1 Ncon
0x32 24 tc 0 32 0 r y . 8 8 8 0 0 16 0 16 16 16 16 2 1 Ncon
0x33 24 tc 0 32 0 r y . 8 8 8 8 0 16 0 16 16 16 16 2 1 Ncon
0x34 24 tc 0 32 0 r y . 8 8 8 0 0 16 0 16 16 16 16 4 1 Ncon
0x35 24 tc 0 32 0 r y . 8 8 8 8 0 16 0 16 16 16 16 4 1 Ncon
0x36 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x37 24 dc 0 32 0 r . . 8 8 8 0 0 24 8 16 16 16 16 0 0 None
0x38 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x39 24 dc 0 32 0 r y . 8 8 8 0 0 16 0 16 16 16 16 0 0 None
0x3a 24 dc 0 32 0 r y . 8 8 8 8 0 16 0 16 16 16 16 0 0 None
0x3b 24 dc 0 32 0 r . . 8 8 8 0 0 16 0 16 16 16 16 0 0 None
0x3c 24 dc 0 32 0 r . . 8 8 8 8 0 16 0 16 16 16 16 0 0 None
0x3d 24 dc 0 32 0 r y . 8 8 8 0 0 0 0 16 16 16 16 0 0 None
0x3e 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 None
0x3f 24 dc 0 32 0 r . . 8 8 8 0 0 0 0 16 16 16 16 0 0 None
0x40 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 None
0x41 24 dc 0 32 0 r y . 8 8 8 0 0 24 8 16 16 16 16 2 1 Ncon
0x42 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 2 1 Ncon
0x43 24 dc 0 32 0 r y . 8 8 8 0 0 24 8 16 16 16 16 4 1 Ncon
0x44 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 4 1 Ncon
0x45 24 dc 0 32 0 r y . 8 8 8 0 0 16 0 16 16 16 16 2 1 Ncon
0x46 24 dc 0 32 0 r y . 8 8 8 8 0 16 0 16 16 16 16 2 1 Ncon
0x47 24 dc 0 32 0 r y . 8 8 8 0 0 16 0 16 16 16 16 4 1 Ncon
0x48 24 dc 0 32 0 r y . 8 8 8 8 0 16 0 16 16 16 16 4 1 Ncon
|
and
| Code: |
$ glxgears
4044 frames in 5.0 seconds = 808.800 FPS
4973 frames in 5.0 seconds = 994.600 FPS
4921 frames in 5.0 seconds = 984.200 FPS
4973 frames in 5.0 seconds = 994.600 FPS
4936 frames in 5.0 seconds = 987.200 FPS
|
Is it ok, now?
Thanks again.
jvlik |
|
| Back to top |
|
|
hjnenc
Veteran
Joined: 15 Aug 2004
Posts: 1599
Location: Vienna, Austria
|
| Posted: Tue Jan 04, 2005 8:45 am Post subject: |
|
|
| Looks good now! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
