| View previous topic :: View next topic |
| Author |
Message |
kaylord
n00b
Joined: 23 Nov 2004
Posts: 24
Location: Milano
|
 Posted: Tue Jan 18, 2005 1:52 pm Post subject: |
 |
|
| [hammerfall] wrote: | non dimenticatevi di dare
| Code: | | # opengl-update ati |
|
Raga scusate la noobyness ma in sto post mi sono un pò perso l'ordine delle cose da verificare/fare/scaricare per l'installazione di questi benedetti e attesi driverz.
Qualche martire ha la pazienza di aprire un post o fare della documentazione a proposito, seguendo gli eventuali check da effettuare prima dell'installazione? Del tipo....
emerge sync, visto che i drivers sono in portage da stamattina, tipo...
quindi emergiare ati-drivers
lanciare il configuratore
controllare tal file di configurazione
ecc. ecc.
Son certo che la cosa sarebbe moltissimo graditissima, e non solo da me!
Bye e grassie...
_________________
Legge di Hofstaedter (ricorsiva):
Tutto richiede più tempo di quanto stimato, anche considerando la Legge di Hofstaedter.
Douglas R. Hofstaedter |
|
| Back to top |
|
 |
realthing
Apprentice
Joined: 29 Jul 2003
Posts: 163
Location: Milano, Italy
|
| Posted: Tue Jan 18, 2005 1:52 pm Post subject: |
|
|
| darkdude wrote: | [a questo punto credo che la 7500 non è supportata...
voi che dite? |
Che per la 7500 non ti servono. I driver drm forniti con X.org fanno tutto ciò che ti serve, accelerazione 3d compresa. I driver closed servono sopratutto a chi ha delle schede recenti (>= 9200 credo) per le quali i drm di X.org non forniscono il direct rendering. |
|
| Back to top |
|
|
realthing
Apprentice
Joined: 29 Jul 2003
Posts: 163
Location: Milano, Italy
|
| Posted: Tue Jan 18, 2005 1:57 pm Post subject: |
|
|
| kaylord wrote: | | [Qualche martire ha la pazienza di aprire un post o fare della documentazione a proposito |
E' sufficiente seguire une delle tante guide per i driver ATI presenti nella documentazione Gentoo, ad esempio
http://www.gentoo.it/tips/ATI-Driver.html
http://gentoo-wiki.com/HOWTO_ATI_Drivers
In fondo, è cambiata solo la versione dei driver che ora è più recente, la procedure di installazione è la stessa  |
|
| Back to top |
|
|
skakz
Guru
Joined: 03 Jul 2004
Posts: 380
Location: Ischia/Napoli/Italia/Terra
|
| Posted: Tue Jan 18, 2005 2:02 pm Post subject: |
|
|
| realthing wrote: |
Che per la 7500 non ti servono. I driver drm forniti con X.org fanno tutto ciò che ti serve, accelerazione 3d compresa. I driver closed servono sopratutto a chi ha delle schede recenti (>= 9200 credo) per le quali i drm di X.org non forniscono il direct rendering. |
infatti io ho il dri enabled con le opengl di xorg e i moduli compilati nel kernel,però pensavo fosse meglio usare i driver proprietari.. |
|
| Back to top |
|
|
kaylord
n00b
Joined: 23 Nov 2004
Posts: 24
Location: Milano
|
| Posted: Tue Jan 18, 2005 2:07 pm Post subject: |
|
|
| realthing wrote: | | kaylord wrote: | | [Qualche martire ha la pazienza di aprire un post o fare della documentazione a proposito |
E' sufficiente seguire une delle tante guide per i driver ATI presenti nella documentazione Gentoo, ad esempio
http://www.gentoo.it/tips/ATI-Driver.html
http://gentoo-wiki.com/HOWTO_ATI_Drivers
In fondo, è cambiata solo la versione dei driver che ora è più recente, la procedure di installazione è la stessa |
Premesso che ancora non ho provato, perché qualcuno parlava di emerge "selettivo" per evitare che venissero installati coi drivers ATI anche Xorg 6.7? In fondo coi drivers nuovi Xorg 6.7 non dovrebbe più essere una dipendenza, nevvero?
_________________
Legge di Hofstaedter (ricorsiva):
Tutto richiede più tempo di quanto stimato, anche considerando la Legge di Hofstaedter.
Douglas R. Hofstaedter |
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Tue Jan 18, 2005 7:11 pm Post subject: |
|
|
a me non vanno!!!!!!!!!! 
perchè???????
uffa, eppure /var/log/Xorg.0.log non riporta EE (qualche WW si...), non posso postare il log perchè non è su questo pc cmq l'errore finale è:
| Code: |
(WW fglrx(0): Failed to set up write.combining range (0xd8700000,0xad000)
...
Fatal server error:
Caught signal 11. Server aborting
|
dmesg non da nessun errore, tutto ok!
(ho un kernel 2.6.10-r4, xrg 6.8, ati radeon mobility 9700 )
qualche idea? |
|
| Back to top |
|
|
abaddon83
Guru
Joined: 17 Jan 2004
Posts: 494
|
| Posted: Tue Jan 18, 2005 7:28 pm Post subject: |
|
|
io quando li emergo non riesco a creare il modulo glfx ... di errori sembra che non ci siano, ma se faccio modprobe dice che il modulo non esiste -_- allegria...
oh saranno anche nuovi sti driver ma restano dei gran bastardi nell'installazione...
_________________
Abaddon's House
Jabber account: abaddon@jabber.linux.it |
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Tue Jan 18, 2005 7:29 pm Post subject: |
|
|
ho rimeso su i miei vecchi "ati" e son tornata in X,...vi posto il mio log di xorg (log dei nuovi driver ati)
| Code: | $ more /var/log/Xorg.0.log
X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.6.9-gentoo-r13 i686 [ELF]
Current Operating System: Linux acertm 2.6.9-gentoo-r13 #35 SMP Tue Jan 18 19:52:54 UTC 2005 i686
Build Date: 26 December 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 18 20:05:16 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "StandbyTime" "5"
(**) Option "SuspendTime" "20"
(**) Option "OffTime" "30"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x800000b0, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3580 card 1025,0051 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 8086,3584 card 1025,0051 rev 02 class 08,80,00 hdr 00
(II) PCI: 00:00:3: chip 8086,3585 card 1025,0051 rev 02 class 08,80,00 hdr 80
(II) PCI: 00:01:0: chip 8086,3581 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1025,0051 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1025,0051 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1025,0051 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1025,0051 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1025,0051 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1025,0051 rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1025,0051 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1025,0051 rev 03 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e50 card 1025,0051 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:02:0: chip 14e4,1653 card 1025,0051 rev 03 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 02:06:0: chip 1217,7223 card 4401,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1217,7223 card 4c01,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1217,7110 card 1025,0051 rev 00 class 08,80,00 hdr 80
(II) PCI: 02:06:3: chip 1217,7223 card 5001,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:07:0: chip 104c,8026 card 1025,0051 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,11), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd0200000 - 0xd07fffff (0x600000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xd0300000 - 0xd03fffff (0x100000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:6:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 7 non-prefetchable memory range:
[0] -1 0 0xd0500000 - 0xd05fffff (0x100000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 11: bridge is at (2:6:3), (2,11,14), BCTRL: 0x0580 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xd8000000/27, 0xd0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd0210000 - 0xd0213fff (0x4000) MX[B]
[1] -1 0 0xd0218000 - 0xd02187ff (0x800) MX[B]
[2] -1 0 0xd0217000 - 0xd0217fff (0x1000) MX[B]
[3] -1 0 0xd0214000 - 0xd0214fff (0x1000) MX[B]
[4] -1 0 0xd0200000 - 0xd020ffff (0x10000) MX[B]
[5] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[6] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[7] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[17] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0210000 - 0xd0213fff (0x4000) MX[B]
[1] -1 0 0xd0218000 - 0xd02187ff (0x800) MX[B]
[2] -1 0 0xd0217000 - 0xd0217fff (0x1000) MX[B]
[3] -1 0 0xd0214000 - 0xd0214fff (0x1000) MX[B]
[4] -1 0 0xd0200000 - 0xd020ffff (0x10000) MX[B]
[5] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[6] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[7] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[17] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0210000 - 0xd0213fff (0x4000) MX[B]
[6] -1 0 0xd0218000 - 0xd02187ff (0x800) MX[B]
[7] -1 0 0xd0217000 - 0xd0217fff (0x1000) MX[B]
[8] -1 0 0xd0214000 - 0xd0214fff (0x1000) MX[B]
[9] -1 0 0xd0200000 - 0xd020ffff (0x10000) MX[B]
[10] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[11] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[12] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[15] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 4.3.99.902, module version = 8.8.25
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
FireGL - (RV250 4964), FireGL - (RV250 4965),
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY FireGL - (M9 4C65),
MOBILITY RADEON 9000 (M9 4C66), RADEON 9000 PRO (D9 4C67),
RADEON 9250 (RV280 5960), RADEON 9200 (RV280 5961),
RADEON 9200 SE (RV280 5964), MOBILITY RADEON 9200 (M9+ 5C61),
MOBILITY RADEON 9200 (M9+ 5C63), FireGL 8800 (R200 5148),
RADEON 8500 (R200 514C), RADEON 9100 (R200 514D),
RADEON - (R200 5154), RADEON - (R200 5155),
RADEON 8500 AIW (R200 4242), RADEON 9600 (RV350 4150),
RADEON 9600 SE (RV350 4151), RADEON 9600 PRO (RV360 4152),
MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
RADEON - (R300 4145), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
FireGL - (R350 414B), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), FireGL - (RV350 4155), FireGL - (RV350 4156),
FireGL - (RV350 4157), RADEON 9800 PRO (R350 4E48),
RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON - (RV370 5B61), RADEON X600 (RV380 5B62),
RADEON - (RV370 5B63), FireGL V3100 (RV370 5B64),
FireGL - (RV370 5B66), FireGL - (RV370 5B67),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON - (M22 5461),
MOBILITY RADEON - (M22 5462), MOBILITY RADEON - (M22 5463),
MOBILITY FireGL V3100 (M22 5464), MOBILITY FireGL - (M22 5465),
MOBILITY FireGL - (M22 5466), MOBILITY FireGL - (M22 5467),
RADEON X600 (RV380 3E50), RADEON - (RV380 3E51),
RADEON - (RV380 3E52), RADEON - (RV380 3E53),
FireGL V3200 (RV380 3E54), FireGL - (RV380 3E55),
FireGL - (RV380 3E56), FireGL - (RV380 3E57),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON - (M24 3151),
MOBILITY RADEON X300 (M22 3152), MOBILITY RADEON - (M24 3153),
MOBILITY FireGL V3200* (M24 3154), MOBILITY FireGL -* (M24 3155),
MOBILITY FireGL -* (M24 3156), MOBILITY FireGL -* (M24 3157),
RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49),
RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B),
RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D),
MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
FireGL -* (R423 5552), MOBILITY RADEON X800 XT (M28 5D48),
MOBILITY FireGL V5100* (M28 5D49), RADEON X700 XT (RV410 5E4A),
RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
RADEON X700 (RV410 5E4D), RADEON X700 (RV410 5E4F),
RADEON - (RV410 5E52), RADEON - (RV410 5E53), RADEON - (RV410 5E55),
RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(--) Chipset MOBILITY RADEON 9600/9700 (M10/M11 4E50) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0210000 - 0xd0213fff (0x4000) MX[B]
[6] -1 0 0xd0218000 - 0xd02187ff (0x800) MX[B]
[7] -1 0 0xd0217000 - 0xd0217fff (0x1000) MX[B]
[8] -1 0 0xd0214000 - 0xd0214fff (0x1000) MX[B]
[9] -1 0 0xd0200000 - 0xd020ffff (0x10000) MX[B]
[10] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[11] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[12] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[15] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x821e2d0
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0210000 - 0xd0213fff (0x4000) MX[B]
[6] -1 0 0xd0218000 - 0xd02187ff (0x800) MX[B]
[7] -1 0 0xd0217000 - 0xd0217fff (0x1000) MX[B]
[8] -1 0 0xd0214000 - 0xd0214fff (0x1000) MX[B]
[9] -1 0 0xd0200000 - 0xd020ffff (0x10000) MX[B]
[10] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[11] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[12] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[15] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[23] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[24] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[25] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[26] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[27] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[28] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[29] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[31] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(==) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY RADEON 9600/9700 (M10/M11 4E50)" (Chipset = 0x4e50)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0051)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xd0100000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x0C
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
Monitor -- LVDS
Connector -- None
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- NONE
(II) fglrx(0): Secondary head:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: IDT
(II) fglrx(0): Panel Size from BIOS: 1400x1050
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Overlay disabled
(==) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Valid mode using on-chip RMX: 1400x1050
(II) fglrx(0): Total 1 valid mode(s) found.
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 65.9 kHz, 61.8 Hz
(II) fglrx(0): Modeline "1400x1050" 108.00 1400 1448 1560 1640 1050 1051 1054 1065
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 4.3.99.902, module version = 8.8.25
ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): cpuSpeedMHz: 0x00000702
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0100000 - 0xd010ffff (0x10000) MX[B]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xd0210000 - 0xd0213fff (0x4000) MX[B]
[8] -1 0 0xd0218000 - 0xd02187ff (0x800) MX[B]
[9] -1 0 0xd0217000 - 0xd0217fff (0x1000) MX[B]
[10] -1 0 0xd0214000 - 0xd0214fff (0x1000) MX[B]
[11] -1 0 0xd0200000 - 0xd020ffff (0x10000) MX[B]
[12] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[13] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[14] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[15] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[16] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[17] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[18] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] 0 0 0x00003000 - 0x000030ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[26] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[27] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[28] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[30] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[33] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[34] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default
(II) fglrx(0): UMM area: 0xd87ad000 (size=0x07853000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe12c4000
(II) fglrx(0): [drm] mapped SAREA 0xe12c4000 to 0xb7d48000
(II) fglrx(0): [drm] framebuffer handle = 0xd8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.8.25
(II) fglrx(0): Date: Jan 14 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.9-gentoo-r13
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xd0100000
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3580
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] grafics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe9481000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x007ad000
(II) fglrx(0): Splitting WC range: base: 0xd8000000, size: 0x7ad000
(II) fglrx(0): Splitting WC range: base: 0xd8400000, size: 0x3ad000
(II) fglrx(0): Splitting WC range: base: 0xd8600000, size: 0x1ad000
(II) fglrx(0): Splitting WC range: base: 0xd8700000, size: 0xad000
(II) fglrx(0): Splitting WC range: base: 0xd8780000, size: 0x2d000
(II) fglrx(0): Splitting WC range: base: 0xd87a0000, size: 0xd000
(II) fglrx(0): Splitting WC range: base: 0xd87a8000, size: 0x5000
(==) fglrx(0): Write-combining range (0xd87ac000,0x1000)
(==) fglrx(0): Write-combining range (0xd87a8000,0x5000)
(==) fglrx(0): Write-combining range (0xd87a0000,0xd000)
(==) fglrx(0): Write-combining range (0xd8780000,0x2d000)
(WW) fglrx(0): Failed to set up write-combining range (0xd8700000,0xad000)
(WW) fglrx(0): Failed to set up write-combining range (0xd8600000,0x1ad000)
(WW) fglrx(0): Failed to set up write-combining range (0xd8400000,0x3ad000)
(==) fglrx(0): Write-combining range (0xd8000000,0x7ad000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,1429)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1056)
(II) fglrx(0): Largest offscreen area available: 1408 x 365
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "NvAGP" is not used
(WW) fglrx(0): Option "RenderAccel" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
22 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
|
grazie a chi magari da darmi una mano... |
|
| Back to top |
|
|
BikE
Guru
Joined: 21 Dec 2004
Posts: 455
Location: Genova
|
| Posted: Tue Jan 18, 2005 7:54 pm Post subject: |
|
|
Mi attacco a questo post per evitare di aprirne un altro.....
Io ho provato a mettere le opzioni
| Code: |
Option "AGPMode" "4"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
|
solo che il log di xorg restituisce
| Code: |
(WW) fglrx(0): Option "AGPFastWrite" is not used
(WW) fglrx(0): Option "AGPMode" is not used
(WW) fglrx(0): Option "EnablePageFlip" is not used
|
E' una radeon 9200 SE, i valori di glxgears sono questi:
| Code: |
3358 frames in 5.0 seconds = 671.600 FPS
4029 frames in 5.0 seconds = 805.800 FPS
4030 frames in 5.0 seconds = 806.000 FPS
4029 frames in 5.0 seconds = 805.800 FPS
|
E' possibile che quelle opzioni non vadano bene per la 9200???
Qualcuno ha gli stessi problemi? |
|
| Back to top |
|
|
maranik
n00b
Joined: 21 May 2003
Posts: 61
Location: Catania, Italy
|
| Posted: Tue Jan 18, 2005 10:41 pm Post subject: |
|
|
Bah, installati e provati. La solita m***a! L'unica cosa e' il supporto a xorg e x86_64, per il resto sono peggio di prima. Prestazioni pessime!
_________________
Maranik
Ognuno e' artefice del proprio destino! |
|
| Back to top |
|
|
SonOfTheStage
n00b
Joined: 02 Mar 2004
Posts: 39
Location: ::1
|
| Posted: Wed Jan 19, 2005 3:23 am Post subject: |
|
|
| BikE wrote: | <snip>
Io ho provato a mettere le opzioni
| Code: |
Option "AGPMode" "4"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
|
<snip>
E' possibile che quelle opzioni non vadano bene per la 9200???<snip> |
Se non ricordo male quelle opzioni sono utilizzati dal driver radeon utilizzato da xorg, per capirci..quello che sfrutta il DRI integrato nel kernel. |
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Wed Jan 19, 2005 4:41 am Post subject: |
|
|
| nessuno ha qualche idea per il mio problema? |
|
| Back to top |
|
|
emix
Veteran
Joined: 30 Nov 2003
Posts: 1014
|
| Posted: Wed Jan 19, 2005 10:08 am Post subject: |
|
|
| luna80 wrote: | | nessuno ha qualche idea per il mio problema? |
Prova a postare la parte relativa alla scheda video di xorg.conf. |
|
| Back to top |
|
|
!equilibrium
Bodhisattva
Joined: 06 Jun 2004
Posts: 2109
Location: MI/BG/LC
|
| Posted: Wed Jan 19, 2005 1:59 pm Post subject: |
|
|
| luna80 wrote: |
| Code: |
(WW fglrx(0): Failed to set up write.combining range (0xd8700000,0xad000)
...
Fatal server error:
Caught signal 11. Server aborting
|
dmesg non da nessun errore, tutto ok!
(ho un kernel 2.6.10-r4, xrg 6.8, ati radeon mobility 9700 )
qualche idea? |
non hai l' MTRR abilitato nel kernel, oppure se è abilitato nel kernel non è stato inizializzato correttamente in fase di boot... controlla in dmesg se hai qualche problema con l'MTRR:
dmesg | grep mtrr
_________________
Arch Tester for Gentoo/FreeBSD
Equilibrium's Universe
all my contents are released under the Creative Commons Licence by-nc-nd 2.5 |
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Wed Jan 19, 2005 5:08 pm Post subject: |
|
|
| emix wrote: |
Prova a postare la parte relativa alla scheda video di xorg.conf. |
eccola
| Code: |
Identifier "Card0"
#Driver "ati"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "RenderAccel" "true"
Option "no_accel" "no"
Option "no_dri" "no"
Option "UseInternalAGPGART" "no"
|
|
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Wed Jan 19, 2005 5:10 pm Post subject: |
|
|
| DarkAngel76 wrote: |
non hai l' MTRR abilitato nel kernel, oppure se è abilitato nel kernel non è stato inizializzato correttamente in fase di boot... controlla in dmesg se hai qualche problema con l'MTRR:
dmesg | grep mtrr |
si, l'MTRR è abilitato! ora sono un pò di fretta dopo guardo per il dmesg,
grazie |
|
| Back to top |
|
|
emix
Veteran
Joined: 30 Nov 2003
Posts: 1014
|
| Posted: Wed Jan 19, 2005 5:16 pm Post subject: |
|
|
Prova ad aggiungere nel file di configurazione:
| Code: | # === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr |
|
|
| Back to top |
|
|
[hammerfall]
Apprentice
Joined: 27 May 2004
Posts: 243
|
| Posted: Wed Jan 19, 2005 5:18 pm Post subject: |
|
|
Ho appena emergiato i driver, pero' una cosa mi ha lasciato perplesso: dopo aver scompattato i sorgenti, l'ebuild ha applicato una patch per i kernel 2.6.10 quando io uso un 2.6.9. Il path dei sorgenti del kernel era corretto, cosa che si deduceva anche dal fatto che i moduli compilati sono stati poi installati nella cartella corretta per il 2.6.9. 
_________________
--------
Hammerfall ^_^ |
|
| Back to top |
|
|
emix
Veteran
Joined: 30 Nov 2003
Posts: 1014
|
| Posted: Wed Jan 19, 2005 5:21 pm Post subject: |
|
|
| [hammerfall] wrote: | | Ho appena emergiato i driver, pero' una cosa mi ha lasciato perplesso: dopo aver scompattato i sorgenti, l'ebuild ha applicato una patch per i kernel 2.6.10 quando io uso un 2.6.9. |
E' normale, ho visto l'ebuild e la patch viene applicata a tutti i sorgenti del ramo 2.6. |
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Wed Jan 19, 2005 5:30 pm Post subject: |
|
|
| emix wrote: | Prova ad aggiungere nel file di configurazione:
| Code: | # === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr |
|
non va neppure così!
| Code: | $ dmesg ¦ grep mtrr
mtrr: v2.0 (20020519)
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x400000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x400000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x400000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x400000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
|
|
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Wed Jan 19, 2005 6:19 pm Post subject: |
|
|
grazie mille ,ora funziona, ho provato rigenerare un xorg.conf con fglrxconfig ed ora va.
ora guarderò che cavolo c'è di diverso dal primo file al secondo!
grazie mille...ora mi godo la mia "nuova" radeon!
cmq l'errore dell'MTRR me lo da ancora, come posso fare per risolverlo?
Last edited by luna80 on Wed Jan 19, 2005 6:55 pm; edited 1 time in total |
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Wed Jan 19, 2005 6:35 pm Post subject: |
|
|
non so se avete mai notato questa cosa...per me abbastanza curiosa...
se fate partire glxgears e poi lo nascondete dietro la finestra del terminale avrete un incremento pauroso dei FPS
nel mio caso (all'inizio davanti, poi dietro e poi di nuova davanti)
| Code: | $ glxgears
5333 frames in 5.0 seconds = 1066.600 FPS
7193 frames in 5.0 seconds = 1438.600 FPS
7194 frames in 5.0 seconds = 1438.800 FPS
7193 frames in 5.0 seconds = 1438.600 FPS
11980 frames in 5.0 seconds = 2396.000 FPS
23023 frames in 5.0 seconds = 4604.600 FPS
23022 frames in 5.0 seconds = 4604.400 FPS
23029 frames in 5.0 seconds = 4605.800 FPS
23028 frames in 5.0 seconds = 4605.600 FPS
12625 frames in 5.0 seconds = 2525.000 FPS
7162 frames in 5.0 seconds = 1432.400 FPS
|
la cosa IO me la spiego così:
se glxgears ha il fuoco usa più memoria per visualizzare tutti i frames mentre se non ha il fuoco (nascosto dietro il terminale) non fa refresh e quindi ha più memoria a disposizione.
...allo stesso tempo la cosa non mi convince molto però perchè mi chiedo: è vero che non fa refresh se è nascosto?
qualcuno che ne sa di più può smentire o confermare la mia ipotesi? son curiosa!
spero che questo post non sia troppo "fuori luogo"... |
|
| Back to top |
|
|
nick_spacca
l33t
Joined: 29 May 2004
Posts: 689
Location: Paris/France
|
| Posted: Wed Jan 19, 2005 6:55 pm Post subject: |
|
|
non so dirti molto, semplicemente questo dimostra la scarsissima affidabilita' di un programma come glxgears....
E comunque questi driver mi sembra siano veramente pessimi se consideri che con la mia radeon 9200 ed i driver 3.9.0 facevo ~1700...(tenendo sempre conto di quanto detto poc'anzi  )
_________________
I can resist anything but temptation.
(O. Wilde) |
|
| Back to top |
|
|
[hammerfall]
Apprentice
Joined: 27 May 2004
Posts: 243
|
| Posted: Thu Jan 20, 2005 10:25 am Post subject: |
|
|
| luna80 wrote: |
cmq l'errore dell'MTRR me lo da ancora, come posso fare per risolverlo? |
Ciao, ho avuto anche io il tuo problema tempo fa e l'ho risolto seguendo questa guida: http://www.rage3d.com/board/showthread.php?threadid=33736241
In sostanza il driver sbaglia a riconoscele la quantita' di memoria montata sulla scheda e quindi per rimediare ne alloca il minimo consentito 32M se non ricordo male.
Seguendo quella guida mi sono fatto uno scriptino che lancio all'avvio e che mette una pezza a questa cosa. Onestamente non saperei dirti se il problema persiste con i nuovi driver pero' a me non da problemi di sorta quindi nel dubbio lo lascio.
| Code: | #!/bin/bash
echo "disable=2" >| /proc/mtrr
echo "base=0xf00000000 size=0x4000000 type=write-combining" >| /proc/mtrr |
Leggi la guida prima di usarlo perche' i valori usati sono relativi alla mia scheda video e potrebbero cambiare per la tua.
Sostanzialmente lo script disabilita l'mtrr relativo alla tua scheda e poi lo riabilita forzando la dimensione della memoria a un valore che tu gli passi (nel mio caso 64Mb)
_________________
--------
Hammerfall ^_^ |
|
| Back to top |
|
|
luna80
Veteran
Joined: 01 Feb 2004
Posts: 1560
Location: switzerland
|
| Posted: Fri Jan 21, 2005 4:44 am Post subject: |
|
|
| [hammerfall] wrote: | | luna80 wrote: |
cmq l'errore dell'MTRR me lo da ancora, come posso fare per risolverlo? |
Ciao, ho avuto anche io il tuo problema tempo fa e l'ho risolto seguendo questa guida: http://www.rage3d.com/board/showthread.php?threadid=33736241
In sostanza il driver sbaglia a riconoscele la quantita' di memoria montata sulla scheda e quindi per rimediare ne alloca il minimo consentito 32M se non ricordo male.
Seguendo quella guida mi sono fatto uno scriptino che lancio all'avvio e che mette una pezza a questa cosa. Onestamente non saperei dirti se il problema persiste con i nuovi driver pero' a me non da problemi di sorta quindi nel dubbio lo lascio.
| Code: | #!/bin/bash
echo "disable=2" >| /proc/mtrr
echo "base=0xf00000000 size=0x4000000 type=write-combining" >| /proc/mtrr |
Leggi la guida prima di usarlo perche' i valori usati sono relativi alla mia scheda video e potrebbero cambiare per la tua.
Sostanzialmente lo script disabilita l'mtrr relativo alla tua scheda e poi lo riabilita forzando la dimensione della memoria a un valore che tu gli passi (nel mio caso 64Mb) |
risolto! grazie!!!! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
