View previous topic :: View next topic |
Author |
Message |
no_expert n00b
Joined: 01 Mar 2005 Posts: 48
|
Posted: Sat Mar 12, 2005 2:15 pm Post subject: Kein Samba mehr nach Updates |
|
|
Hi,
ich habe mein Gentoo System, wie ich es regelmäßig mache, mit emerge sync und emerge -u --deep world aktualisiert und neulich auch um die neuen Konfigurationsdateien gekümmert, die man immer erneuern sollte. Meine smb.conf habe ich dabei beim alten belassen und definitiv nichts daran geändert.
Jetzt habe ich das Problem das mein Linuxrechner zwar im Windowsnetzwerk (schnell) gefunden wird, aber ich nicht darauf zugreifen kann. Dabei erscheint die Windowsmeldung:
Code: | Auf \\(mein Linuxrechner) kann nicht zugegriffen werden. Sie haben eventuell keine Berechtigung, diese Netzwerkressoruce zu verwenden.... |
In der Syslog fällt mir folgendes auf:
Code: | open_oplock_ipc: Failed to geht local UDP socket for address 10007f. Error was Cannot assign requested address |
Samba lässt sich ohne Problem starten und beenden, mein FTP-Server funktioniert auch einwandfrei und als Internet-Gateway fungiert der Rechner immer noch einwandfrei. Wo liegt da die Ursache? |
|
Back to top |
|
|
Bloody_Viking Tux's lil' helper
Joined: 15 Feb 2005 Posts: 123 Location: Hemsbach BW
|
Posted: Sat Mar 12, 2005 7:27 pm Post subject: |
|
|
Hallo,
Poste mal deine smb.conf
Gruß
Bloody |
|
Back to top |
|
|
no_expert n00b
Joined: 01 Mar 2005 Posts: 48
|
Posted: Sat Mar 12, 2005 7:38 pm Post subject: |
|
|
Auch wenn ich zweifel habe das es hilft:
Code: | [global]
workgroup = tmb
interfaces = 127.0.0.1 eth0
bind interfaces only = yes
printer admin = @ntadmin, root, administrator
;; map to guest = Bad User
security = user
server string = vdr
local master = no
ldap suffix = dc=example,dc=com
display charset = ISO8859-15
unix charset = ISO8859-15
restrict anonymous = no
domain master = no
preferred master = no
max protocol = NT
ldap ssl = No
server signing = Auto
[homes]
comment = Home Directories
valid users = %S
browseable = no
read only = No
[downloads]
browseable = no
writeable = yes
path = /home/downloads
write list = user1,user2,@gruppe1
force directory mode = 665
msdfs proxy = no
force group = gruppe1
force create mode = 665
create mask = 0665
force user = user1
comment = Downloads
case sensitive = no
[uploads]
browseable = no
writeable = yes
path = /home/uploads
write list = @gruppe2
force directory mode = 665
msdfs proxy = no
force group = gruppe2
force create mode = 665
force user = user1
create mask = 0665
comment = Uploads
case sensitive = no
[pdf]
comment = PDF creator
path = /var/tmp
printable = yes
print command = /usr/bin/smbprngenpdf -J '%J' -c %c -s %s -u '%u' -z %z
create mask = 0600
[printers]
comment = All Printers
path = /var/tmp
printable = yes
create mask = 0600
browseable = no
[print$]
comment = Printer Drivers
path = /var/lib/samba/drivers
write list = @ntadmin root
force group = ntadmin
create mask = 0664
directory mask = 0775
|
|
|
Back to top |
|
|
Bloody_Viking Tux's lil' helper
Joined: 15 Feb 2005 Posts: 123 Location: Hemsbach BW
|
Posted: Sat Mar 12, 2005 8:12 pm Post subject: |
|
|
Hallo,
Quote: | Auch wenn ich zweifel habe das es hilft: |
Wollte nur was sicher gehen!
Mein Verdacht ist das dein Loopback Device nicht korrekt funktioniert.
Komentier diese Zeilen mal aus:
Code: | interfaces = 127.0.0.1 eth0
bind interfaces only = yes |
Voraus gesetzt du hast nur eine Netzwerkkarte in der Kiste!
Gruß
Bloody |
|
Back to top |
|
|
no_expert n00b
Joined: 01 Mar 2005 Posts: 48
|
Posted: Sun Mar 13, 2005 11:12 am Post subject: |
|
|
Geht tatsächlich, danke!
Aber warum hat das vorher mit den Einstellungen funktioniert und jetzt nicht mehr? Würde mich schon mal interessieren wieso, weshalb und warum. |
|
Back to top |
|
|
Bloody_Viking Tux's lil' helper
Joined: 15 Feb 2005 Posts: 123 Location: Hemsbach BW
|
Posted: Sun Mar 13, 2005 2:29 pm Post subject: |
|
|
Hallo,
Ich hatte das Problem mal auf einer Suse kiste.
Ich vermute das beim etc-update irgendeine Konfigurationsdatei wo die Loopback Device einstellungen definiert sind verändert ist.
Aber binde doch deine reale IP ein.
z.b.
Code: | interfaces = 192.168.x.x eth0 |
Damit sollte es funktionieren.
Gruß
Bloody
edit:Wenn es gehen sollte markiere den Thread als [Solved]! |
|
Back to top |
|
|
|