| View previous topic :: View next topic |
| Author |
Message |
Naspe
Guru
Joined: 10 Dec 2003
Posts: 321
Location: Genova - Italy
|
 Posted: Wed Mar 16, 2005 10:59 pm Post subject: Sensori... |
 |
|
Salve gente.
Oggi ho pensato bene di incasinarmi configurando i sensori di temperatura, voltaggi e velocità delle vendole sui miei PC.
Ho cominciato con il portatile. Tutto apposto direi... Aparte il fatto che nn fa vedere alcun voltaggio... Ma almeno le temperature di MB e CPU ci sono.
Allora ho pensato bene di fare lo stesso sul server... Compilato tutto giusto, installato tutto corretto, dato il comandino...
| Code: | caronte root # sensors
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.70 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +2.56 V (min = +2.40 V, max = +2.61 V)
+3.3V: +2.24 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +2.47 V (min = +4.76 V, max = +5.24 V) ALARM
+12V: +5.12 V (min = +11.39 V, max = +12.61 V) ALARM
-12V: -27.36 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -13.64 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +0.00 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +0.00 V
fan1: 3515 RPM (min = 0 RPM, div = 8)
fan2: 84375 RPM (min = 664 RPM, div = 8)
fan3: 0 RPM (min = 664 RPM, div = 8)
M/B Temp: +127 C (low = +15 C, high = +40 C) sensor = thermistor
CPU Temp: +6 C (low = +15 C, high = +45 C) sensor = diode
Temp3: +127 C (low = +15 C, high = +45 C) sensor = thermistor
|
Non trovate ci sia qualcosa di strano? 
E' tutta la sera che cerco sul forum qualcuno che avesse lo stesso problema ma niente. Ho trovato gente a cui crashava tutto, gente che nn trovava i sensori... ma nessuno con dei valori sballati come i miei...
Avevo mesi fa aperto un post simile. Il consiglio era stato quello di editare il file di configurazione dei sensori... Ma è una cosa impossibile!!!
Non so assolutamente cosa fare...
_________________
God Is Real... Unless Declared As Integer...
Provoca Il Più Bravo... Morirai Come Uno Schiavo!!!
Hai Evocato Il Tuono!!! Ora Raccogli Tempesta!!! |
|
| Back to top |
|
 |
Naspe
Guru
Joined: 10 Dec 2003
Posts: 321
Location: Genova - Italy
|
| Posted: Thu Mar 17, 2005 12:31 am Post subject: |
|
|
Girando su google e il forum si parla di settare i parametri, l'offset... Io nn ci capisco nulla...
_________________
God Is Real... Unless Declared As Integer...
Provoca Il Più Bravo... Morirai Come Uno Schiavo!!!
Hai Evocato Il Tuono!!! Ora Raccogli Tempesta!!! |
|
| Back to top |
|
|
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Thu Mar 17, 2005 8:44 am Post subject: |
|
|
Io ai tempi quando ho configurato i sensori sulla mia a7v333-R ho seguito questa strada:
- dopo ever installato tutto il sw necessario ho modificato gli offset sensor.conf in modo da tenere in considerazione lo sbaglio tra le temperature del bios e quelle rilevate dai moduli.
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
Naspe
Guru
Joined: 10 Dec 2003
Posts: 321
Location: Genova - Italy
|
| Posted: Thu Mar 17, 2005 9:01 am Post subject: |
|
|
Provero' anche io a farlo.
Pero' un mio amico mi ha fatto notare che il valore 127 e' un valore particolare...
| Eimar wrote: | che con dei segnali elettrici per descivere una temperatura devi usare +5volt e -5 volt ossia 1 e 0 ossia binario... in binario con 2^7 (2 alla settima) descrivi tutti i numeri che vanno da 0...127 ossia puo' andar benissimo per descrivere la temperatura in gradi C da 0gradi a 127 gradi...
il che vuol dire che se tutti i vaolri sono a +5 volt ossia il sensore non è attivo ti segna o 127 oppure 0 a seconda di come è impostato
quindi stà rilevando la temperatura non dal giusto sensore, oppure il sensore è partito ed è come se non ci fosse |
Pero' sto belin di sensore dal BIOS funziona... E sensors-detect trova solo sto qui....
P.S.: La mainboard e' una ECS KT400-M2
_________________
God Is Real... Unless Declared As Integer...
Provoca Il Più Bravo... Morirai Come Uno Schiavo!!!
Hai Evocato Il Tuono!!! Ora Raccogli Tempesta!!! |
|
| Back to top |
|
|
Naspe
Guru
Joined: 10 Dec 2003
Posts: 321
Location: Genova - Italy
|
| Posted: Thu Mar 17, 2005 10:51 am Post subject: |
|
|
Up 
_________________
God Is Real... Unless Declared As Integer...
Provoca Il Più Bravo... Morirai Come Uno Schiavo!!!
Hai Evocato Il Tuono!!! Ora Raccogli Tempesta!!! |
|
| Back to top |
|
|
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Thu Mar 17, 2005 10:54 am Post subject: |
|
|
| Naspe wrote: | | Up |
Non uppare se non sono passate 24 ore.
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
Naspe
Guru
Joined: 10 Dec 2003
Posts: 321
Location: Genova - Italy
|
| Posted: Thu Mar 17, 2005 1:03 pm Post subject: |
|
|
Ho abilitato il debug sull' i2c. Spero possa servire a qualcuno.
| Code: |
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=5e, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=5e, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=5c, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=5c, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=5a, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=5a, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=58, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=58, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=56, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=56, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=54, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=54, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=52, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=52, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=50, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=50, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=4e, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=4e, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=4c, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=4c, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=4a, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=4a, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=48, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=48, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=46, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=46, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=44, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=44, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=42, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=42, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=40, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=40, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=ae, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=ae, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=ac, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=ac, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=aa, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=aa, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=a8, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=a8, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=a6, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=a6, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=a4, DAT0=20, DAT1=00
i2c_adapter i2c-0: Error: no response!
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=a4, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=a2, DAT0=20, DAT1=00
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=a2, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=a2, DAT0=20, DAT1=00
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=a2, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=a0, DAT0=20, DAT1=00
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=a0, DAT0=20, DAT1=00
i2c_adapter i2c-0: Transaction (post): CNT=00, CMD=00, ADD=a0, DAT0=20, DAT1=00
i2c_adapter i2c-0: Successfull!
i2c_adapter i2c-0: SMBus busy (0x40). Resetting...
i2c_adapter i2c-0: Transaction (pre): CNT=00, CMD=00, ADD=a0, DAT0=20, DAT1=00
vt596_smbus 0000:00:11.0: VT596_smba = 0x5000
vt596_smbus 0000:00:11.0: SMBREV = 0x0
vt596_smbus 0000:00:11.0: using Interrupt SMI# for SMBus. |
Ecco che dice il Kernel. Dal basso verso l'alto.
Una cosa mi da da pensare... Il mio LMsensors carica questi moduli...
* Loading lm_sensors modules...
* Loading i2c-viapro... [ ok ]
* Loading i2c-isa... [ ok ]
* Loading eeprom... [ ok ]
* Loading it87... [ ok ]
* Initializing sensors... [ ok ]
Se non ho capito male uso l'ISA bus non l'SMBus... Qui pero' comapre solo l'SMBus...
_________________
God Is Real... Unless Declared As Integer...
Provoca Il Più Bravo... Morirai Come Uno Schiavo!!!
Hai Evocato Il Tuono!!! Ora Raccogli Tempesta!!! |
|
| Back to top |
|
|
Naspe
Guru
Joined: 10 Dec 2003
Posts: 321
Location: Genova - Italy
|
| Posted: Thu Mar 17, 2005 1:16 pm Post subject: |
|
|
Tanto per fornirvi quanto piu' materiale possibile ecco che dice sensors detect e lsmod:
| Code: |
caronte root # sensors-detect
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c/*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-viapro' for device 00:11.0: VIA Technologies VT8233A/8235 South Bridge
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Load `i2c-viapro' (say NO if built into your kernel)? (YES/no):
Module loaded succesfully.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no):
Module loaded succesfully.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus Via Pro adapter at 5000
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x51
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
Trying address 0x0290... Success!
(confidence 7, driver `lm78')
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
Trying address 0x0290... Success!
(confidence 8, driver `it87')
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (0x8705)
Probing for `ITE 8705F Super IO Sensors'
Success... found at address 0x0290
Probing for `ITE 8712F Super IO Sensors'
Failed! (0x8705)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Do you want to scan for secondary Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus Via Pro adapter at 5000' (Algorithm unavailable)
Busdriver `i2c-viapro', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus Via Pro adapter at 5000' (Algorithm unavailable)
Busdriver `i2c-viapro', I2C address 0x51
Chip `SPD EEPROM' (confidence: 8)
Driver `lm78' (may not be inserted):
Misdetects:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `National Semiconductor LM78' (confidence: 7)
Driver `it87' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `ITE 8705F Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)?smbus
If you want to load the modules at startup, generate a config file
below and make sure lm_sensors gets started; e.g
$ rc-update add lm_sensors default.
To make the sensors modules behave correctly, add these lines to
/etc/modules.conf:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----end cut here----
WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really should
try these commands right now to make sure everything is working properly.
Monitoring programs won't work until it's done.
To load everything that is needed, execute the commands above...
#----cut here----
# I2C adapter drivers
modprobe i2c-viapro
modprobe i2c-isa
# I2C chip drivers
modprobe eeprom
modprobe it87
# sleep 2 # optional
/usr/bin/sensors -s # recommended
Do you want to overwrite /etc/conf.d/lm_sensors? Enter s to specify other file name?
(yes/NO/s): n
|
lsmod
| Code: |
caronte root # lsmod
Module Size Used by
it87 21668 0
i2c_isa 2176 0
i2c_dev 9216 0
i2c_viapro 8332 0
i2c_sensor 3328 1 it87
i2c_core 18816 5 it87,i2c_isa,i2c_dev,i2c_viapro,i2c_sensor
|
_________________
God Is Real... Unless Declared As Integer...
Provoca Il Più Bravo... Morirai Come Uno Schiavo!!!
Hai Evocato Il Tuono!!! Ora Raccogli Tempesta!!! |
|
| Back to top |
|
|
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Thu Mar 17, 2005 2:35 pm Post subject: |
|
|
Hai provato a dare un'occhiata alla pagina web del progetto lm-sensors.Ti consiglio di cercare la visto che il tuo problema sembra particolare.
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
