View previous topic :: View next topic |
Author |
Message |
lopio Veteran
Joined: 22 Dec 2003 Posts: 1161 Location: savona, Italy
|
Posted: Sat Apr 09, 2005 11:18 am Post subject: mouse ottico usb [semi-risolto] |
|
|
ciao
mi hanno regalato un mini mouse ottico itech ma non riesco a farlo funzionare
Ho provato a seguire i consigli dei vari post ma non sono approdato a nulla.
Il mouse ha la lucina illuminata ma non si muove e dal dmesg sembra essere visto come un usb storage pero'
Code: | dmesg | grep -i usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usb 3-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver usb-storage
[<c03dc1f0>] (usb_hcd_irq+0x0/0x60)
[<c03dc1f0>] (usb_hcd_irq+0x0/0x60)
usbcore: registered new driver hiddev
usb 3-2: modprobe timed out on ep0in
usb 3-2: modprobe timed out on ep0in
usb 3-2: modprobe timed out on ep0in
usb 3-2: modprobe timed out on ep0in
usbhid: probe of 3-2:1.0 failed with error -5
|
ho queste entry in xorg.conf
Code: |
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mouse0"
Option "Emulate3Buttons"
EndSection
Section "InputDevice"
# Identifier and driver
Identifier "USBMouse"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
|
e nella sezione ServerLayout (gutter dixit)
Code: |
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "USBMouse" "SendCoreEvents"
|
Ho udev abilitato e 2 file in /dev/input/ cioe' mouse0 e mice ma sembrano corrispondere entrambi al touchpad (il cat dice questo)
Qualche aiuto?
grazie
Last edited by lopio on Sun Apr 10, 2005 4:04 pm; edited 1 time in total |
|
Back to top |
|
|
neryo Veteran
Joined: 09 Oct 2004 Posts: 1292 Location: Ferrara, Italy, Europe
|
Posted: Sat Apr 09, 2005 11:23 am Post subject: |
|
|
Code: |
Option "Device" "/dev/input/mice"
Option "Protocol" "auto"
|
Prova cosi'
ciao _________________ cache: a safe place for hiding or storing things..
D-link DWL-G650 AirPlus
Apache Php Mysql |
|
Back to top |
|
|
lan Apprentice
Joined: 06 Mar 2004 Posts: 215 Location: Verona, Italy (Romeo & juliet`s City)
|
Posted: Sat Apr 09, 2005 11:24 am Post subject: |
|
|
mouse-test che ti dice?
usa il trucco del cat : cat /dev/input/mice muovi il mouse e se esce porcheria hai trovato il device
per fermare il comando CTRL+C come al solito
ps: ne ho anche io uno mini usb e va benissimo _________________ --
http://www.giuseppe-marocchio.com
skype: l4nz0r /voice
USH team www.ush.it |
|
Back to top |
|
|
gutter Bodhisattva
Joined: 13 Mar 2004 Posts: 7162 Location: Aarau, Aargau, Switzerland
|
Posted: Sat Apr 09, 2005 11:25 am Post subject: |
|
|
Aggancia il mouse togli il modulo usbstorage a carica il modulo usbhid.
Vedi se ti crea il device e se va con un cat. _________________ Registered as User #281564 and Machines #163761 |
|
Back to top |
|
|
lopio Veteran
Joined: 22 Dec 2003 Posts: 1161 Location: savona, Italy
|
Posted: Sat Apr 09, 2005 11:26 am Post subject: |
|
|
lan wrote: | mouse-test che ti dice?
usa il trucco del cat : cat /dev/input/mice muovi il mouse e se esce porcheria hai trovato il device
per fermare il comando CTRL+C come al solito
|
ciao come dicevo sopra con il trucco del cat sembra che sia mouse0 che mice corrispondano al touchpad
@neryo : anche settando "auto" non funziona |
|
Back to top |
|
|
lopio Veteran
Joined: 22 Dec 2003 Posts: 1161 Location: savona, Italy
|
Posted: Sat Apr 09, 2005 11:36 am Post subject: |
|
|
gutter wrote: | Aggancia il mouse togli il modulo usbstorage a carica il modulo usbhid.
Vedi se ti crea il device e se va con un cat. |
ciao questo e' lsomod attuale
Code: |
eth1394 17928 0
usbhid 30912 0
ohci1394 29444 0
yenta_socket 18568 0
rsrc_nonstatic 8576 1 yenta_socket
pcmcia_core 39732 2 yenta_socket,rsrc_nonstatic
radeonfb 70980 0
i2c_algo_bit 8200 1 radeonfb
i2c_core 17808 2 radeonfb,i2c_algo_bit
snd_intel8x0m 14660 0
snd_intel8x0 27584 2
snd_ac97_codec 68856 2 snd_intel8x0m,snd_intel8x0
arc4 1792 1
ieee80211_crypt_wep 4096 1
ipw2200 121960 0
firmware_class 7552 1 ipw2200
ieee80211 34884 1 ipw2200
ieee80211_crypt 4740 3 ieee80211_crypt_wep,ipw2200,ieee80211
fglrx 232316 7
8139too 20480 0
mii 4096 1 8139too
|
il modulo usbhid c'e' ma non ho il modulo usbstorage (deve essere builtin lo levo)
grazie ciao |
|
Back to top |
|
|
lan Apprentice
Joined: 06 Mar 2004 Posts: 215 Location: Verona, Italy (Romeo & juliet`s City)
|
|
Back to top |
|
|
lopio Veteran
Joined: 22 Dec 2003 Posts: 1161 Location: savona, Italy
|
Posted: Sat Apr 09, 2005 11:57 am Post subject: |
|
|
ciao seguendo i suggerimenti di gutter e mettendo usbstorage com modulo ottengo che il device non viene piu' visto come usb storage device ma come mouse adesso
Code: |
usb 3-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
[<c03dc1f0>] (usb_hcd_irq+0x0/0x60)
[<c03dc1f0>] (usb_hcd_irq+0x0/0x60)
|
Viene ora creato un nuovo file di dispositivo /dev/input/mouse1 e il modulo usbhid caricato automaticamente grazie a udev
Purtroppo sostituendo tale device in xorg.conf ho che il cat rimane lo stesso muto (come Protocol ho provato sia IMPS/2 che auto )
ciao |
|
Back to top |
|
|
gutter Bodhisattva
Joined: 13 Mar 2004 Posts: 7162 Location: Aarau, Aargau, Switzerland
|
Posted: Sat Apr 09, 2005 1:56 pm Post subject: |
|
|
Queste sono le sezioni del mio xorg.conf relative al mouse USB, prova ad usare queste.
Code: | # Identifier and driver
Identifier "USBMouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
|
Code: | InputDevice "USBMouse" "SendCoreEvents"
InputDevice "SynapticsTouchpad" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
|
_________________ Registered as User #281564 and Machines #163761 |
|
Back to top |
|
|
lopio Veteran
Joined: 22 Dec 2003 Posts: 1161 Location: savona, Italy
|
Posted: Sat Apr 09, 2005 2:08 pm Post subject: |
|
|
gutter wrote: | Queste sono le sezioni del mio xorg.conf relative al mouse USB, prova ad usare queste. |
ciao proprio dal tuo conf avevo preso spunto ma non va.Inoltre sembra che il file di device nuovo sia mouse1 e che sia proprio quello che dovra' essere usato peccato che sia sempre "muto"
Che sia problema di Protocol ? il modulo caricato da udev e' uhci_hcd ma e' corretto?
grazie ciao |
|
Back to top |
|
|
mc619 Apprentice
Joined: 07 Dec 2004 Posts: 203
|
Posted: Sat Apr 09, 2005 2:24 pm Post subject: |
|
|
Anche io ho avuto un problema del genere tempo fa,, ho risolto togliendo uno dei due mouse da xorg.conf e mettendo l'unico rimasto come /dev/input/mice( che a quanto ho capito raggruppa tutti i mouse attaccati...). Se nn ti funziona ti posto pure il mio xorg.conf sezione relativa |
|
Back to top |
|
|
lopio Veteran
Joined: 22 Dec 2003 Posts: 1161 Location: savona, Italy
|
Posted: Sat Apr 09, 2005 3:10 pm Post subject: |
|
|
mc619 wrote: | Anche io ho avuto un problema del genere tempo fa,, ho risolto togliendo uno dei due mouse da xorg.conf e mettendo l'unico rimasto come /dev/input/mice( che a quanto ho capito raggruppa tutti i mouse attaccati...). Se nn ti funziona ti posto pure il mio xorg.conf sezione relativa |
ciao levare da xorg.conf la sezione del touchpad non cambia le cose.mice rimane lo stesso il touchpad e il mouse usb rimane /dev/input/mouse1 non funzionante.
Il dubbio e' che il problema sia proprio Questo mouse di una ditta (Itech) non proprio ... |
|
Back to top |
|
|
lopio Veteran
Joined: 22 Dec 2003 Posts: 1161 Location: savona, Italy
|
Posted: Sun Apr 10, 2005 2:06 pm Post subject: |
|
|
CIAO CI SIAMO QUASI
la situazione attuale e' questa
1) ho trasfomato in modulo tutti i componenti usb che mi sembravano coinvolti e dopo mille esperimenti ho che mi funziona tutto SOLO se uso una determinata porta usb delle 3 a disposizione e metto usbmouse e usbhid in autoload ....
Udev mi carica i moduli ehci_hcd,ohci_hcd,uhci_hcd non so in base a cosa e in ogni caso dovrebbe farlo dopo che e' partito modules_autoload.d, corretto?
Rimarrebbe quindi da risolvere questo mistero della porta (le altre assicuro che sono funzionanti dal punto di vista hw).
Questo lsmod quando funziona
Code: |
Module Size Used by
eth1394 17928 0
ohci_hcd 19080 0
ohci1394 29444 0
yenta_socket 18568 0
rsrc_nonstatic 8576 1 yenta_socket
pcmcia_core 39732 2 yenta_socket,rsrc_nonstatic
radeonfb 70980 0
i2c_algo_bit 8200 1 radeonfb
i2c_core 17808 2 radeonfb,i2c_algo_bit
snd_intel8x0m 14660 0
snd_intel8x0 27584 2
snd_ac97_codec 68856 2 snd_intel8x0m,snd_intel8x0
usbmouse 4480 0
usbhid 31304 0
ehci_hcd 28168 0
uhci_hcd 27920 0
arc4 1792 1
ieee80211_crypt_wep 4096 1
ipw2200 121960 0
firmware_class 7552 1 ipw2200
ieee80211 34884 1 ipw2200
ieee80211_crypt 4740 3 ieee80211_crypt_wep,ipw2200,ieee80211
fglrx 232316 7
8139too 20480 0
mii 4096 1 8139too
|
questo il .config sezione usb
Code: |
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
# CONFIG_HID_PID is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
CONFIG_USB_MTOUCH=m
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set
|
|
|
Back to top |
|
|
|