| View previous topic :: View next topic |
| Author |
Message |
fallow
Bodhisattva
Joined: 08 Jan 2004
Posts: 2208
Location: Poland
|
 Posted: Mon Jul 04, 2005 9:52 pm Post subject: |
 |
|
| alinv wrote: | | Code: | | Could not connect to host vivid.dat.pl. |
 |
I can only say " " .
space on this server was given to me in thanks to a friend - Milu , so I have to wait just ...
cheers.
_________________
"Time is a companion that goes with us on a journey. It reminds us to cherish each moment, because it will never come again. What we leave behind is not as important as how we have lived" J-L. Picard  |
|
| Back to top |
|
 |
mkrisch
n00b
Joined: 22 Nov 2004
Posts: 59
|
| Posted: Fri Jul 08, 2005 7:10 am Post subject: vmware-workstation 5.0 and gnome-cups crash |
|
|
i've got a bizarre problem and i can't think of where to start, so i'll just post here on the off chance that does something useful.
i had no problems with 2.6.12-rc6-love1, and similarly i was working fine with 2.6.12-love1. the other day i tried to get vmware-workstation 5 up and running. i would start vmware and after the main window would come up, the system would freeze for a second, and i'd get a reboot.
i put that aside, and today i tried to set up a networked printer with hp jet direct. when i came to print a test page, again, a freeze and a reboot.
switching back to rc6 makes the problem go away.
here's the diff between the two configs:
| Code: | # diff config-2.6.12-rc6-love1 config-2.6.12-love1
3,4c3,4
< # Linux kernel version: 2.6.12-rc6-love1
< # Fri Jun 24 16:32:27 2005
---
> # Linux kernel version: 2.6.12-love1
> # Thu Jun 30 11:05:17 2005
15c15
< CONFIG_DIOS_CFQ=y
---
> # CONFIG_DIOS_CFQ is not set
18,28c18,20
< # CONFIG_DIOS_ANTICIPATORY is not set
<
< #
< # Logo configuration
< #
< CONFIG_LOGO=y
< # CONFIG_LOGO_LINUX_MONO is not set
< # CONFIG_LOGO_LINUX_VGA16 is not set
< CONFIG_LOGO_LINUX_CLUT224=y
< CONFIG_LOGO_FALLOW1_CLUT224=y
< # CONFIG_LOGO_SH2_CLUT224 is not set
---
> CONFIG_DIOS_ANTICIPATORY=y
> CONFIG_GENETIC_LIB=y
> CONFIG_GENETIC_IOSCHED_AS=y
37d28
< CONFIG_SWAP_SCHED=m
160a152
> # CONFIG_1GLOWMEM is not set
173c165,166
< # CONFIG_SOFTWARE_SUSPEND is not set
---
> CONFIG_SOFTWARE_SUSPEND=y
> CONFIG_PM_STD_PARTITION="/dev/hda8"
206,213c199
< CONFIG_APM=m
< # CONFIG_APM_IGNORE_USER_SUSPEND is not set
< CONFIG_APM_DO_ENABLE=y
< # CONFIG_APM_CPU_IDLE is not set
< # CONFIG_APM_DISPLAY_BLANK is not set
< # CONFIG_APM_RTC_IS_GMT is not set
< CONFIG_APM_ALLOW_INTS=y
< # CONFIG_APM_REAL_MODE_POWER_OFF is not set
---
> # CONFIG_APM is not set
332a319
> CONFIG_PARPORT_NOT_PC=y
379c366
< CONFIG_IOSCHED_AS=m
---
> CONFIG_IOSCHED_AS=y
592a580,590
>
> #
> # TCP congestion control
> #
> CONFIG_TCP_CONG_BIC=y
> CONFIG_TCP_CONG_WESTWOOD=m
> CONFIG_TCP_CONG_HTCP=y
> # CONFIG_TCP_CONG_HSTCP is not set
> # CONFIG_TCP_CONG_HYBLA is not set
> # CONFIG_TCP_CONG_VEGAS is not set
> # CONFIG_TCP_CONG_SCALABLE is not set
973c971,973
< # CONFIG_TCG_TPM is not set
---
> CONFIG_TCG_TPM=m
> CONFIG_TCG_NSC=m
> CONFIG_TCG_ATMEL=m
1186a1187,1191
>
> #
> # Logo configuration
> #
> # CONFIG_LOGO is not set
1364c1369
< CONFIG_USB_HID_MOUSE_POLLING_INTERVAL=0
---
> CONFIG_USB_HID_MOUSE_POLLING_INTERVAL=2
1412c1417
< CONFIG_USB_MON=m
---
> # CONFIG_USB_MON is not set
1417c1422
< # CONFIG_USB_USS720 is not set
---
> CONFIG_USB_USS720=m
1676c1681,1684
< # CONFIG_DEBUG_PAGEALLOC is not set
---
>
> #
> # Page alloc debug is incompatible with Software Suspend on i386
> # |
and the obligatory emerge --info:
| Code: | # emerge --info
Portage 2.0.51.19 (default-linux/x86, gcc-3.4.4, glibc-2.3.5-r0, 2.6.12-rc6-love1 i686)
=================================================================
System uname: 2.6.12-rc6-love1 i686 Intel(R) Pentium(R) M processor 1500MHz
Gentoo Base System version 1.6.12
Python: dev-lang/python-2.3.5,dev-lang/python-2.4.1-r1 [2.4.1 (#1, Jun 20 2005, 17:52:12)]
dev-lang/python: 2.3.5, 2.4.1-r1
sys-apps/sandbox: [Not Present]
sys-devel/autoconf: 2.13, 2.59-r6
sys-devel/automake: 1.9.5, 1.7.9-r1, 1.6.3, 1.5, 1.8.5-r3, 1.4_p6
sys-devel/binutils: 2.15.92.0.2-r10
sys-devel/libtool: 1.5.18-r1
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CFLAGS="-Os -march=pentium-m -mmmx -msse -msse2 -fforce-addr -ftracer -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib/mozilla/defaults/pref /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/splash /etc/terminfo /etc/env.d"
CXXFLAGS="-Os -march=pentium-m -mmmx -msse -msse2 -fforce-addr -ftracer -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoaddcvs autoconfig ccache distlocks sandbox sfperms strict"
GENTOO_MIRRORS="ftp://mirror.isp.net.au/pub/gentoo/ ftp://mirror.pacific.net.au/linux/Gentoo http://mirror.isp.net.au/pub/gentoo/"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage-gentopia /usr/local/portage /usr/local/portage-games"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 X a52 aac acpi alsa avi bash-completion berkdb bitmap-fonts bonobo bzip2 cairo cdr crypt cups curl dbus divx4linux dvd eds emboss encode esd exif fam fbcon foomaticdb gd gdbm gif gnome gpm gstreamer gtk gtk2 guile hal howl imagemagick imlib java jpeg ldap libg++ libwww lirc mad mikmod mmx mono motif mozilla mp3 mpeg mysql ncurses nptl offensive ogg oggvorbis opengl oss pam pcmcia pda pdflib perl pic png python qt quicktime readline samba sdl spell sqlite sse sse2 ssl svg tcpd tetex theora tiff truetype truetype-fonts type1-fonts usb v4l vorbis xinerama xml2 xv xvid zlib video_cards_radeon userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CBUILD, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS |
any thoughts on what to try next? |
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Fri Jul 08, 2005 8:00 am Post subject: |
|
|
mkrisch, try a vanilla 2.6.12 and if it happens there too, it's not a fault of love-sources
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
fallow
Bodhisattva
Joined: 08 Jan 2004
Posts: 2208
Location: Poland
|
| Posted: Fri Jul 08, 2005 12:32 pm Post subject: |
|
|
Im going on the vacations , so will be no new release for some (7) days or something 
this is the target place http://www.jurata.net.pl/foto.html , anybody ? hehe
cheers.
_________________
"Time is a companion that goes with us on a journey. It reminds us to cherish each moment, because it will never come again. What we leave behind is not as important as how we have lived" J-L. Picard |
|
| Back to top |
|
|
ilikelinux
n00b
Joined: 19 Dec 2003
Posts: 50
|
| Posted: Sat Jul 09, 2005 10:42 pm Post subject: |
|
|
| Seems all fine to me. |
|
| Back to top |
|
|
cichy
Apprentice
Joined: 27 Feb 2004
Posts: 217
Location: Jasionówka/podlaskie/Poland
|
| Posted: Mon Jul 11, 2005 6:43 am Post subject: |
|
|
Works on 2.6.12.2.
I patched kernel manually... (~three warnings: some files are already patched)
AthlonXP 1.5GHz, 256MB RAM, KT400, GF4MX etc.
Cheers
_________________
::Gentoo::Linux::(athlon-xp // amd64 // pentium-m // nocona)::ID:387704:: |
|
| Back to top |
|
|
mbar
Veteran
Joined: 19 Jan 2005
Posts: 1990
Location: Poland
|
| Posted: Tue Jul 12, 2005 9:27 am Post subject: |
|
|
| Is there any chance that ITE8212 RAID Driver will return to Love-Sources? |
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Tue Jul 12, 2005 10:20 am Post subject: |
|
|
| mbar wrote: | | Is there any chance that ITE8212 RAID Driver will return to Love-Sources? |
it's in 2.6.13-rc1 upwards already so next love release will have it
http://lkml.org/lkml/2005/6/20/226
you can use that patch so long
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
Tiger683
Veteran
Joined: 08 Jan 2005
Posts: 1347
Location: Heffner's House
|
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Tue Jul 12, 2005 10:30 am Post subject: |
|
|
wooot! the scsi one is in -mm too? interesting!
well then ppl have the choice between original ITE's (scsi) and Alan Cox' which handles stuff as ide harddisk (/dev/hde here)
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
mkrisch
n00b
Joined: 22 Nov 2004
Posts: 59
|
| Posted: Tue Jul 12, 2005 11:34 pm Post subject: |
|
|
| gimpel wrote: | | mkrisch, try a vanilla 2.6.12 and if it happens there too, it's not a fault of love-sources |
doesn't happen with gentoo-sources or either of the last two nitro's.
and i'm getting reboots now more regularly. not sure what about it makes it so unstable.
--mk |
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Thu Jul 21, 2005 11:51 am Post subject: |
|
|
with 2.6.12-love-1 i got a lot of reboot too, i got no useful log to show, it just crash.
I'm checking my rams, hds [raid promise as ide], and graphic card [nvidia].
Normal [768M ram, all hds connected, nvidia driver -> X crash -- hds on promise-controller were used a lot, amule+xmms+emerge, hd on promise on next reboot was mounted read-only]
Tiny [512 ram, the newest block, all hds connected, nvidia driver -> X crash -- hds on promise-controller were used a lot, amule+xmms+emerge]
Small [512 ram, the newest block, all hds connected, nv driver -> seems stable -- hds on promise-controller were used a lot, amule+xmms+emerge]
i dont' know if it's a kernel fault or just my hardware going crazy ...
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
playfool
l33t
Joined: 01 Jun 2004
Posts: 688
Location: Ã
rhus, Denmark
|
| Posted: Thu Jul 21, 2005 12:10 pm Post subject: |
|
|
| unz wrote: | with 2.6.12-love-1 i got a lot of reboot too, i got no useful log to show, it just crash.
I'm checking my rams, hds [raid promise as ide], and graphic card [nvidia].
Normal [768M ram, all hds connected, nvidia driver -> X crash -- hds on promise-controller were used a lot, amule+xmms+emerge, hd on promise on next reboot was mounted read-only]
Tiny [512 ram, the newest block, all hds connected, nvidia driver -> X crash -- hds on promise-controller were used a lot, amule+xmms+emerge]
Small [512 ram, the newest block, all hds connected, nv driver -> seems stable -- hds on promise-controller were used a lot, amule+xmms+emerge]
i dont' know if it's a kernel fault or just my hardware going crazy ... |
The magic word here is nvidia driver it seems - notice that X crashes when you load that one? |
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Thu Jul 21, 2005 12:31 pm Post subject: |
|
|
Yeah i'm quite sure that nvidia works bad with this kernel. But hds bad-mounted and crash happening only when hds are stressed moved my thoughts to others problems. But my Small-config keep being stable, case closed? 
UPDATE: i switched to ck-sources and everything works fine.
There are some problems with my conf for ide/raid controllers in love-sources [via 8235 and promise 20276] ... i don't know what ... i used the same .config and made oldconfig
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
supermihi
Guru
Joined: 09 Feb 2005
Posts: 348
|
| Posted: Mon Jul 25, 2005 7:56 pm Post subject: |
|
|
Where are the next love-sources?
_________________
"You may say I'm a dreamer, but I'm not the only one." |
|
| Back to top |
|
|
Marctraider
Guru
Joined: 24 Dec 2003
Posts: 387
|
| Posted: Mon Jul 25, 2005 8:04 pm Post subject: |
|
|
there arent new ones yet.
_________________
MOBO: Maximus II Gene
RAM: DDR2 OCZ 4GB
CPU: E6400 Conroe
GPU: HD2600XT
SATA: 3x 250GB. |
|
| Back to top |
|
|
supermihi
Guru
Joined: 09 Feb 2005
Posts: 348
|
| Posted: Mon Jul 25, 2005 8:09 pm Post subject: |
|
|
I know that, but I want them!
_________________
"You may say I'm a dreamer, but I'm not the only one." |
|
| Back to top |
|
|
Marctraider
Guru
Joined: 24 Dec 2003
Posts: 387
|
| Posted: Mon Jul 25, 2005 8:12 pm Post subject: |
|
|
Well I actually don't, I'm waiting for ati to release good 2.6.12 drivers, so i'll stick with 2.6.12-love1.
If i go any futher (to 2.6.13) and stuff im not going to reach my goal any better ;)
(Damn ati)
_________________
MOBO: Maximus II Gene
RAM: DDR2 OCZ 4GB
CPU: E6400 Conroe
GPU: HD2600XT
SATA: 3x 250GB. |
|
| Back to top |
|
|
fallow
Bodhisattva
Joined: 08 Jan 2004
Posts: 2208
Location: Poland
|
| Posted: Mon Jul 25, 2005 9:56 pm Post subject: |
|
|
Im going to make some soon 
cheers.
_________________
"Time is a companion that goes with us on a journey. It reminds us to cherish each moment, because it will never come again. What we leave behind is not as important as how we have lived" J-L. Picard |
|
| Back to top |
|
|
Naib
Watchman
Joined: 21 May 2004
Posts: 6065
Location: Removed by Neddy
|
| Posted: Wed Jul 27, 2005 9:56 pm Post subject: |
|
|
copying to USB stikc is painfully slooooow
24meg, eta 28min!!!
_________________
| Quote: | | Removed by Chiitoo |
|
|
| Back to top |
|
|
Tiger683
Veteran
Joined: 08 Jan 2005
Posts: 1347
Location: Heffner's House
|
| Posted: Thu Jul 28, 2005 10:45 am Post subject: |
|
|
Naib: I adore your sig.... so true 
_________________
Retired gentoo user |
|
| Back to top |
|
|
ktech
Guru
Joined: 12 Apr 2003
Posts: 340
|
| Posted: Thu Jul 28, 2005 2:15 pm Post subject: |
|
|
| Naib wrote: | copying to USB stikc is painfully slooooow
24meg, eta 28min!!! |
Someone changed something in the vfat driver so now something like "every bit copied is synced and fat table updated", so it's very slow and even dangerous to the flash drive.
You should not use sync in /etc/fstab. If you use udev, which uses sync by default, you should avoid that behaviour by changing the file /usr/share/hal/fdi/90defaultpolicy/storage-policy.fdi. The next two lines must be changed from TRUE to FALSE:
<merge key="volume.policy.mount_option.sync" type="bool">false</merge>
<merge key="volume.policy.mount_option.sync" type="bool">false</merge>
And by the way, you now must unmount the flash drive before extracting it because of the no-sync thing. |
|
| Back to top |
|
|
Marctraider
Guru
Joined: 24 Dec 2003
Posts: 387
|
| Posted: Thu Jul 28, 2005 2:19 pm Post subject: |
|
|
| ktech wrote: | | Naib wrote: | copying to USB stikc is painfully slooooow
24meg, eta 28min!!! |
Someone changed something in the vfat driver so now something like "every bit copied is synced and fat table updated", so it's very slow and even dangerous to the flash drive.
You should not use sync in /etc/fstab. If you use udev, which uses sync by default, you should avoid that behaviour by changing the file /usr/share/hal/fdi/90defaultpolicy/storage-policy.fdi. The next two lines must be changed from TRUE to FALSE:
<merge key="volume.policy.mount_option.sync" type="bool">false</merge>
<merge key="volume.policy.mount_option.sync" type="bool">false</merge>
And by the way, you now must unmount the flash drive before extracting it because of the no-sync thing. |
When I use sync it never went as slow as with Naib, strange.
_________________
MOBO: Maximus II Gene
RAM: DDR2 OCZ 4GB
CPU: E6400 Conroe
GPU: HD2600XT
SATA: 3x 250GB. |
|
| Back to top |
|
|
ktech
Guru
Joined: 12 Apr 2003
Posts: 340
|
| Posted: Thu Jul 28, 2005 3:12 pm Post subject: |
|
|
| Marctraider wrote: |
When I use sync it never went as slow as with Naib, strange. |
Then you're not on 2.6.12 or the filesystem of your flash drive is not vfat. |
|
| Back to top |
|
|
Marctraider
Guru
Joined: 24 Dec 2003
Posts: 387
|
| Posted: Thu Jul 28, 2005 3:16 pm Post subject: |
|
|
| ktech wrote: | | Marctraider wrote: |
When I use sync it never went as slow as with Naib, strange. |
Then you're not on 2.6.12 or the filesystem of your flash drive is not vfat. ;) |
So you're pointing out that ONLY on 2.6.12 it's slow with sync? because on 2.6.11 and earlier it was ofcourse a little slower then async but not _this_ slow.... :p
_________________
MOBO: Maximus II Gene
RAM: DDR2 OCZ 4GB
CPU: E6400 Conroe
GPU: HD2600XT
SATA: 3x 250GB. |
|
| Back to top |
|
|
|
Unsupported Software
