View previous topic :: View next topic |
Author |
Message |
Tiger683 Veteran
Joined: 08 Jan 2005 Posts: 1347 Location: Heffner's House
|
Posted: Fri Jul 15, 2005 5:12 pm Post subject: 2.6.12-nitro4 [_BROKEN REISER4!!!_] |
|
|
Big thanks to b3cks for providing nitro a temporary new home on his webserver!!!!!!!
2.6.12-nitro4 "Task till dawn"
DONT USE WITH ____REISER4____ !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ITS BROKEN
READ THIS FIRST
Nitro-sources is an experimental kernel patchset which is NOT supported by the Gentoo devs. If you have problems with something, see if the problem persists with a kernel supported by Gentoo. If you still have the same problem with a kernel supported by Gentoo (like vanilla-sources), then file a bug report at h**p://bugs.gentoo.org . If you only had the problem with 2.6.12-nitro4, and not with a vanilla kernel, then bug us in this thread.
NOTE: THIS IS A REPATCH FROM SCRATCH, Consider Experimental until we have some reports !!!!
There is very little support for GCC4 PROBLEMS, ATI/NVIDIA MODULES OR REISER4
Need exhaustive feedback on x86_64 and ppc, so please do report and please do it with
SUFFICIENT debug info (dmesg etc..) The latter applies to ALL bugreports
PLEASE READ SPECIAL NOTES BELOW CHANGENOTES BEFORE POSTING BUGS !!!
This kernel already contains the ipw2100 and ipw2200 drivers same version as portage !!!
Patchlist wrote: |
ck3_pdflush-tweaks_reiser-BUGfix-nitro4.diff
/* ck3 plus 2 patches from 13-rc-ck THX CON */
alsa_CVS_12_7_04-nitro4.diff
/* Alsa from CVS as usual */
fbsplash_vesafb-tng.diff
/* vfb-tng and fbsplash from spock */
inotify-0.23-rml-2.6.12-15.patch
inotify_ntfs_oops_fix.patch
/* Inotify plus the ntfs-oops fix */
ite-821X-alancox.patch
/* ite driver from alan */
kernel-2.6.11-layer7-1.4.patch
/* Layer7 ipt patch */
mm-patches.diff
/* very few of these, most got weeded out */
reiser4.diff
/* reiser4 + vfs patch, first attempt to address lkml complaints
about reiser4 trying to copy linux' vfs */
swsusp-2.1.9.9-for-2.6.12.2-cumulative.diff
/* Software Suspend 2 */
genetic_lib-and-genetic_anticipatory_iosched-nitro4.diff
/* genetic anticipatory io-scheduler */
n10-config-hz-2.6.12.diff
/* config kernel's internal timer freq */
n11-squashfs2.1-r2.diff
/* compact readonly fs */
n18-lufs2.diff
/* lufs from last cvs ever commited */
n19-daconfig-2.2.0-FROM_NO.diff
/* Pretty menuconfig, THX damouse */
n21-config-nr-tty-devices-FROM_NO.diff
/* config nr of tty* entries in /dev, thx steel */
n23-nitro-fb_logo.diff
/* framebuffer logo , who did it again? */
n33-lirc_cvs_28-06-05_fullconfig-nitro.diff
/* lirc cvs, extensive kconfig (please verify receiver settings before compiling!!!) */
n34-svgalib_helper-1.9.21-nitro.diff
/* nitro users never reemerge this again after kernel upgrade , THX nitro
* */
n27-adjust_nr_running.diff
/* ... */
n9-usbhid-readd-kconfig-r2.diff
/* ... */
use_once_cleanup
320-irqbal_fast
390-slabtune
410-fasync_lock_rcu
480-physnode_map
/* from mjb, mostly slab stuff */
fat-fix_slab_cache_leak.diff
/* ... */
ieee80211_wifi.patch
/* for compatibility with ipw2x00 from portage */
kstrdup-1-rml-2.6.12-rc3-1.patch
kstrdup-2-rml-2.6.12-rc3-1.patch
/* keep kstrdump in one place for all users */
linux-2.6.12-mppe-mppc-1.3.patch
/* Microsoft Point-to-Point Encryption and Compression support */
nitro-menu.diff
/* */
sk98lin_v8.23.1.3_2.6.12.patch
/* updated sk98lin driver from syskonnect */
staircase-ctl-w-kconfig.diff
/* some ctls for staircase-sched tuning */
wbsd-2.6.12-1.patch
wbsd-mmc-bulk.patch
wbsd-mmc-powercycle.patch
/* should fix some problem with cardreader in notebooks ? */
slowdown_fix_thx-legoguy.diff
/* fix a bug in irq handling code */
|
NiTR0 menu wrote: |
Staircase scheduler tunables --->
[ ] Genetic Anticipatory I/O scheduler (EXPERIMENTAL)
[ ] Inotify file change notification support
< > SVGALIB-HELPER driver ver. 1.9.21
[ ] Software Suspend 2 --->
< > SquashFS 2.1 - Squashed file system support
< > LUFS file system support (EXPERIMENTAL)
Linux InfraRed Controller --->
< > IT821X IDE support
< > Intel PRO/Wireless 2100 Network Connection
< > Intel PRO/Wireless 2200BG and 2915ABG Network Connection
< > Microsoft PPP compression/encryption (MPPC/MPPE)
< > Layer 7 match support (EXPERIMENTAL)
|
Staircase scheduler tunables ---> wrote: |
(6) Basetimeslice for the staircase cpu-scheduler
(14) Basetimeslice factor for RR scheduling
(1) Task burst factor (staircase jumps) (DANGEROUS!!!)
|
MM-patches wrote: |
acpi-disable-c2-c3-for-_all_-ibm-r40e-laptops-bug-3549.patch
acpi-ext-build-fix.patch
acpi-videoc-properly-remove-notify-handlers.patch
call-device_shutdown-with-interrupts-enabled.patch
drivers-net-wireless-ipw2100-use-the-dma_32bit_mask-constant.patch
drivers-net-wireless-ipw2200-use-the-dma_32bit_mask-constant.patch
export-file_ra_state_init-again.patch
ext3-reduce-allocate-with-reservation-lock-latencies.patch
fix-recursive-ipw2200-dependencies.patch
fix-soft-lockup-due-to-ntfs-vfs-part-and-explanation.patch
git-drm-initmap.patch
git-drm-via-fixup.patch
git-drm-via.patch
git-libata-adma-mwi.patch
git-libata-chs-support.patch
git-libata-passthru.patch
git-libata-promise-sata-pata.patch
git-netdev-register-netdev.patch
git-netdev-we18-ieee80211-wifi.patch
git-ntfs.patch
input-alps-fix-tap-logic.patch
input-atkbd-allow-0x7f-scancode.patch
input-usb-ignore-logitech-vendor-usages.patch
ipw2100-assume-recent-kernel.patch
ipw2100-cleanup-debug-prints.patch
ipw2100-kill-dead-macros.patch
ipw2100-old-gcc-fix.patch
ipw2100-remove-by-hand-function-entry-exit-debugging.patch
ipw2100-remove-commented-out-code.patch
ipw2100-small-cleanups.patch
ipw2200-build-fix.patch
iw_we18-5.diff
kbuild-build-a-single-module-using-make-dir-moduleko.patch
tty-output-lossage-fix.patch
x86_64-div-by-zero-fix.patch
|
changes since -nitro3
Code: |
a few updates
i.e. ipw2x00 drivers now the versions like in portage ;)
ctls for staircase parameters (sorry Con, dont kill me for it lol)
hmm, see patchlist ;)
IMPORTANT: THE WHOLE NITRO IS REPATCHED FROM SCRATCH AGAIN]!!!
|
Special Notes:
IPW2x00 are now synced with portage, test them to see if not accidentally broken :S
Win4Lin users: if still not working, will kick it out in next release
Reiser4 users: Reiser4 is not compatible with 4K STACKS
SWSUSP2: need reports
Only Nvidia drivers 76.64 and 76.67 were __verified__ to work, use NVAgp=3 or 2, it works and is faster (for me at least)
If having problems with ATI DRIVERS see this post and the others on the subject in that thread : }
BrokenOut: __SORRY__
Stuff not in NiTR0 menu is arch dependent stuff, you will find it in the usual place of Kconfig
Staircase controls: this is no magic, wont make u an uber desktop
test as you want to find out best settings... i go with 1 10 1 and am ok for now
settings are in these ranges:
timeslice = {1 to 20}
timeslice_factor = {10 to 26}
burst_factor = {1 to 10}
Can also be changed on the fly through /proc/sys/kernel/{timeslice,timeslice_factor,burst_factor} with an echo command too
OK, now the LINKS:
Ebuild
Patch
Release Notes
Gentree wrote: |
Gentoo + Nitro = Gazzzzz!
|
And as usual:
HAVE FUN GODDAMMIT!!!! _________________ Retired gentoo user
Last edited by Tiger683 on Sat Jul 16, 2005 12:46 pm; edited 4 times in total |
|
Back to top |
|
|
Lenz Veteran
Joined: 17 Jul 2003 Posts: 1439 Location: Marburg [HE, D, EU]
|
Posted: Fri Jul 15, 2005 5:19 pm Post subject: |
|
|
Since the server by university Karlsruhe seems to have a serious problem today, another high speed mirror has been set up:
ebuild:
nitro-sources-2.6.12-r4.ebuild
distfiles:
patch-2.6.12-nitro4.bz2
Note: In most cases it should be enough to download the ebuild (in bold letters), the other required files will be downloaded automatically from my webspace while emerging the ebuild!
Have fun! _________________ .:: Lenz' Signature 1.7b ::.
| Gentoo Linux since v1.4 (08-2003) [Screenshot]
| NetHack Highscore: 5.476.380 Pts., Val-Dwa-Fem-Law, ~ ascended to demigoddess-hood ~ |
|
Back to top |
|
|
Tiger683 Veteran
Joined: 08 Jan 2005 Posts: 1347 Location: Heffner's House
|
Posted: Fri Jul 15, 2005 5:23 pm Post subject: |
|
|
Lenz wrote: | Since the server seems to have a serious problem, another high speed mirror has been set up:
|
You can say that loud....
Our university's server got hacked earlier this week, im not sure
how long it will last until we'll be running again.....
Thanks Lenz,
a few nitro users are the main reason why im still doing this and will keep
it this way for some time.... _________________ Retired gentoo user |
|
Back to top |
|
|
madmango Guru
Joined: 15 Jul 2003 Posts: 507 Location: PA, USA
|
Posted: Fri Jul 15, 2005 5:54 pm Post subject: |
|
|
Sweet. I'll try this out as soon as my box can boot (fresh install)
edit: works nicely so far. Thanks! _________________ word. |
|
Back to top |
|
|
Lenz Veteran
Joined: 17 Jul 2003 Posts: 1439 Location: Marburg [HE, D, EU]
|
Posted: Fri Jul 15, 2005 6:45 pm Post subject: |
|
|
Unfortunately I don't get it working
First, it boots as normal, but then I suddenly get always a kernel oops!
Code: | Jul 15 20:06:25 sulphur Unable to handle kernel NULL pointer dereference at virtual address 00000008
Jul 15 20:06:25 sulphur printing eip:
Jul 15 20:06:25 sulphur c01d9708
Jul 15 20:06:25 sulphur *pde = 00000000
Jul 15 20:06:25 sulphur Oops: 0000 [#1]
Jul 15 20:06:25 sulphur PREEMPT
Jul 15 20:06:25 sulphur Modules linked in: i2c_viapro snd_bt87x tvaudio bttv video_buf i2c_algo_bit btcx_risc tveeprom msp3400 tuner i2c_core nvidia
Jul 15 20:06:25 sulphur CPU: 0
Jul 15 20:06:25 sulphur EIP: 0060:[<c01d9708>] Tainted: P VLI
Jul 15 20:06:25 sulphur EFLAGS: 00010246 (2.6.12-nitro4)
Jul 15 20:06:25 sulphur EIP is at set_low_priority+0x8/0x80
Jul 15 20:06:25 sulphur eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
Jul 15 20:06:25 sulphur esi: 00000004 edi: 00000004 ebp: ed048ba0 esp: ed17dce4
Jul 15 20:06:25 sulphur ds: 007b es: 007b ss: 0068
Jul 15 20:06:25 sulphur Process cupsd (pid: 8261, threadinfo=ed17c000 task=ef2cf020)
Jul 15 20:06:25 sulphur Stack: 00000000 00000004 ed17df3c ed048ba0 c01d9d69 00000004 00000000 00000000
Jul 15 20:06:25 sulphur 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Jul 15 20:06:25 sulphur 00000001 ed17c000 ed048ba0 ed17dde8 efdab014 c01ea5ba ed17df3c ed048ba0
Jul 15 20:06:25 sulphur Call Trace:
Jul 15 20:06:25 sulphur [<c01d9d69>] longterm_lock_znode+0x2b9/0x2c0
Jul 15 20:06:25 sulphur [<c01ea5ba>] cbk_cache_scan_slots+0x12a/0x2c0
Jul 15 20:06:25 sulphur [<c01ea78b>] cbk_cache_search+0x3b/0x60
Jul 15 20:06:25 sulphur [<c01e9523>] coord_by_handle+0x13/0x40
Jul 15 20:06:25 sulphur [<c01e94dc>] object_lookup+0xbc/0xf0
Jul 15 20:06:25 sulphur [<c01fa139>] dir_go_to+0x99/0xd0
Jul 15 20:06:25 sulphur [<c01fb1fd>] llseek_common_dir+0xad/0x100
Jul 15 20:06:25 sulphur [<c01fb150>] llseek_common_dir+0x0/0x100
Jul 15 20:06:25 sulphur [<c015dceb>] vfs_llseek+0x4b/0x60
Jul 15 20:06:25 sulphur [<c015dd79>] sys_lseek+0x79/0xa0
Jul 15 20:06:25 sulphur [<c0103187>] sysenter_past_esp+0x54/0x75
Jul 15 20:06:25 sulphur Code: 46 0c 39 c7 8d 70 f4 75 dd c7 45 04 01 00 00 00 c7 45 00 00 00 00 00 5b 5e 5f 5d c3 e8 62 10 33 00 eb dc 55 57 56 53 8b 7c 24
14 <8b> 47 04 85 c0 74 5c 8b 47 08 8d 6f 08 39 c5 8d 70 f4 74 48 bb |
Then I'm forced to shut the machine down, because nothing else is possible anymore... any idea? It also said that something is "tainted", but syslog-ng didn't log it. _________________ .:: Lenz' Signature 1.7b ::.
| Gentoo Linux since v1.4 (08-2003) [Screenshot]
| NetHack Highscore: 5.476.380 Pts., Val-Dwa-Fem-Law, ~ ascended to demigoddess-hood ~ |
|
Back to top |
|
|
babykart Guru
Joined: 08 Oct 2004 Posts: 415
|
Posted: Fri Jul 15, 2005 7:15 pm Post subject: |
|
|
on a P4/SMP, reiser4, after booting on this kernel, prelink doesn't work... I don't have this problem on a P4 std...
nothing about this in the logs...
I stay on nitro3... _________________ >> Gentoo-FR <<
----- |
|
Back to top |
|
|
Tiger683 Veteran
Joined: 08 Jan 2005 Posts: 1347 Location: Heffner's House
|
Posted: Fri Jul 15, 2005 7:30 pm Post subject: |
|
|
HMM.....
[EDIT]
the new reiser4 patch breaks reiser4 partitions, guys, sorry, im gonna do some fixing tomorrow..... _________________ Retired gentoo user
Last edited by Tiger683 on Fri Jul 15, 2005 10:09 pm; edited 1 time in total |
|
Back to top |
|
|
andrew_wiggin n00b
Joined: 21 Apr 2005 Posts: 59 Location: Israel
|
Posted: Fri Jul 15, 2005 7:52 pm Post subject: |
|
|
im waiting for reiser4 to work... need some new speed |
|
Back to top |
|
|
LittleGreenMan n00b
Joined: 06 Aug 2004 Posts: 12 Location: Moscow,Russia
|
Posted: Fri Jul 15, 2005 9:24 pm Post subject: |
|
|
Tiger683 wrote: | sadly, i also report a bug
Win4Lin does NOT work, and probably will never get another chance to.....
[EDIT]
the new reiser4 patch breaks reiser4 partitions, guys, sorry, im gonna do some fixing tomorrow..... |
hmmm some strange here: in my case win4lin is work!!!
here is screenshot http://www.savefile.com/files/9942182
THANK YOU Tiger683!!!
... |
|
Back to top |
|
|
Kensai Guru
Joined: 09 Mar 2004 Posts: 569 Location: Puerto Rico
|
Posted: Fri Jul 15, 2005 10:57 pm Post subject: |
|
|
Very happily downloading soon to compile, I'll post later on. _________________ Gentoo: Gigabyte: nFORCE 2: nVIDIA GeForce 6600: AMD Athlon XP 3200+
Leaving the above specs to immortalize the first system I Installed Gentoo on! |
|
Back to top |
|
|
adam1 n00b
Joined: 04 May 2004 Posts: 35 Location: Ontario,Canada,Planet Earth
|
Posted: Sat Jul 16, 2005 2:44 am Post subject: Running Nitro4 happily on my BAWX |
|
|
CPU: Amd Athlon XP 2000+
ECS k7s5apro motherboard
Ram ammount 1 gig
SiL IDE Striped raid
Nvidia Geforce FX5200
LEadTek TV Tuner 2000 Delux XP <not sure what to use with this in nix yet I might go MythTV.
Creative Labs Audigy2 Dolby SBlive 5.1
LG 4x DVD burner
LG 16x DVD reader
-----------------------------------------------------------------------------------------------------------------
All working happily on first boot. w00t w00t |
|
Back to top |
|
|
Kensai Guru
Joined: 09 Mar 2004 Posts: 569 Location: Puerto Rico
|
Posted: Sat Jul 16, 2005 2:54 am Post subject: |
|
|
Man you make the best out of kernels always look at this:
Code: | kensai@kensai ~ $ uname -a
Linux kensai 2.6.12-nitro4 #1 Fri Jul 15 19:36:07 UTC 2005 i686 AMD Athlon(tm) XP 2000+ AuthenticAMD GNU/Linux |
Code: | kensai@kensai ~ $ glxgears
11551 frames in 5.0 seconds = 2310.200 FPS
11697 frames in 5.0 seconds = 2339.400 FPS |
I usually get 2070 FPS and with other nitro sources I get 2250 with this I'm far better in FPS. Tiger683 I love you!!!!!. _________________ Gentoo: Gigabyte: nFORCE 2: nVIDIA GeForce 6600: AMD Athlon XP 3200+
Leaving the above specs to immortalize the first system I Installed Gentoo on! |
|
Back to top |
|
|
wdreinhart Guru
Joined: 11 Jun 2003 Posts: 569 Location: 4QFJ12345678
|
Posted: Sat Jul 16, 2005 4:48 am Post subject: |
|
|
Works here, including ntfs. Thanks for a very nice patchset! |
|
Back to top |
|
|
ilikelinux n00b
Joined: 19 Dec 2003 Posts: 50
|
Posted: Sat Jul 16, 2005 7:54 am Post subject: |
|
|
Works here all fine. Including ati-drivers. |
|
Back to top |
|
|
b3cks Veteran
Joined: 23 Mar 2004 Posts: 1481 Location: Bremen (GER)
|
Posted: Sat Jul 16, 2005 7:58 am Post subject: |
|
|
Thanx Tiger for your work!
Will test this patchset if Reiser4 is working... _________________ I am /root and if you see me laughing you better have a backup. |
|
Back to top |
|
|
LucaSpiller Apprentice
Joined: 10 Sep 2004 Posts: 188 Location: Censorship Land (aka England)
|
Posted: Sat Jul 16, 2005 9:32 am Post subject: Re: Running Nitro4 happily on my BAWX |
|
|
adam1 wrote: | LEadTek TV Tuner 2000 Delux XP <not sure what to use with this in nix yet I might go MythTV. |
If you want something nice and simple I recommend TV Time. It even has XMLTV support to show you what is on now and next.
Looking good Tiger683. _________________ :: Luca :: Mac Fag :: Original Macbook, 2g RAM :: Closet Linux user (seasoned with salt and pepper) :: C2D E4400 @ 2ghz, 4g RAM (only 3.2g detected under 64bit...), Nvidia 9600GSO :: |
|
Back to top |
|
|
Tiger683 Veteran
Joined: 08 Jan 2005 Posts: 1347 Location: Heffner's House
|
Posted: Sat Jul 16, 2005 12:07 pm Post subject: |
|
|
We already have reiser4 fix... (Thanx for testing go to Lenz!!!)
The nitro5 is almost there,
reiser4 fix will be the only change....
cheers
T _________________ Retired gentoo user |
|
Back to top |
|
|
adam1 n00b
Joined: 04 May 2004 Posts: 35 Location: Ontario,Canada,Planet Earth
|
Posted: Sun Jul 17, 2005 8:42 pm Post subject: Re: Running Nitro4 happily on my BAWX |
|
|
LucaSpiller wrote: | adam1 wrote: | LEadTek TV Tuner 2000 Delux XP <not sure what to use with this in nix yet I might go MythTV. |
If you want something nice and simple I recommend TV Time. It even has XMLTV support to show you what is on now and next.
Looking good Tiger683. |
I decided on going with TVTime thanks for the suggestion only one slight problem is I don't have full colour...... oh I did manage to get my FM tuner working though thanks to Gkrellm2 and the radio plugin. If you got any info on the non full color problem please point me to a howto or something I can't seem to find one.... |
|
Back to top |
|
|
ilikelinux n00b
Joined: 19 Dec 2003 Posts: 50
|
Posted: Sun Jul 17, 2005 8:44 pm Post subject: Re: Running Nitro4 happily on my BAWX |
|
|
adam1 wrote: | LucaSpiller wrote: | adam1 wrote: | LEadTek TV Tuner 2000 Delux XP <not sure what to use with this in nix yet I might go MythTV. |
If you want something nice and simple I recommend TV Time. It even has XMLTV support to show you what is on now and next.
Looking good Tiger683. |
I decided on going with TVTime thanks for the suggestion only one slight problem is I don't have full colour...... oh I did manage to get my FM tuner working though thanks to Gkrellm2 and the radio plugin. If you got any info on the non full color problem please point me to a howto or something I can't seem to find one.... |
You haven't got the tv norm wrong have you ( PAL / NTSC ) btw: radio that come with xawtv is good for the terminal junkies. |
|
Back to top |
|
|
adam1 n00b
Joined: 04 May 2004 Posts: 35 Location: Ontario,Canada,Planet Earth
|
Posted: Sun Jul 17, 2005 8:54 pm Post subject: Re: Running Nitro4 happily on my BAWX |
|
|
ilikelinux wrote: | adam1 wrote: | LucaSpiller wrote: | adam1 wrote: | LEadTek TV Tuner 2000 Delux XP <not sure what to use with this in nix yet I might go MythTV. |
If you want something nice and simple I recommend TV Time. It even has XMLTV support to show you what is on now and next.
Looking good Tiger683. |
I decided on going with TVTime thanks for the suggestion only one slight problem is I don't have full colour...... oh I did manage to get my FM tuner working though thanks to Gkrellm2 and the radio plugin. If you got any info on the non full color problem please point me to a howto or something I can't seem to find one.... |
You haven't got the tv norm wrong have you ( PAL / NTSC ) btw: radio that come with xawtv is good for the terminal junkies. |
Yeah I got the TV norm set correctly to NTSC but just no full color |
|
Back to top |
|
|
|