| View previous topic :: View next topic |
| Author |
Message |
Zolookas
n00b
Joined: 19 Jul 2005
Posts: 21
|
 Posted: Thu Jul 21, 2005 1:59 pm Post subject: Logitech optical mouse |
 |
|
I have Logitech OEM Pilot S96 optical mouse and sometimes my mouse cuts off or starts clicking with no reason. The only way to fix this problem is ctrl+alt+backspace and startx 
xorg.conf:
| Code: | Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
#Section "InputDevice"
# Identifier "USB Mouse"
# Driver "mouse"
# Option "Device" "/dev/input/mice"
# Option "SendCoreEvents" "true"
# Option "Protocol" "auto"
# Option "ZAxisMapping" "4 5"
# Option "Buttons" "5"
#EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
HorizSync 31.5 - 92.0
VertRefresh 50.0 - 100.0
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
# HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
Option "NoLogo"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection |
|
|
| Back to top |
|
 |
stealthy
Tux's lil' helper
Joined: 08 Aug 2002
Posts: 118
Location: ONTARIO CANADA
|
| Posted: Thu Jul 21, 2005 2:30 pm Post subject: |
|
|
Hello I that mouse on my laptop once a while and have no problems. Could be faulty mouse. Although mouse configuration for X is slightly different too.
Yours:
| Code: | [quote]Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
[/quote]
|
mine
| Code: | Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
EndSection
|
As you can see only thing really different is the protocol that I am using. I don't know why you have emulate3buttons etc. cause the scroll wheel already has the 3rd button
Hope this helps.
_________________
All your Gentoo are belong to us. |
|
| Back to top |
|
|
Zolookas
n00b
Joined: 19 Jul 2005
Posts: 21
|
| Posted: Thu Jul 21, 2005 2:51 pm Post subject: |
|
|
OK, i am testing thin config now. If i will have any problems, i will post here.
Thay xorg.conf is generated by hwd on my previous distro: archlinux. |
|
| Back to top |
|
|
Zolookas
n00b
Joined: 19 Jul 2005
Posts: 21
|
| Posted: Thu Jul 21, 2005 5:28 pm Post subject: |
|
|
| Zolookas wrote: | OK, i am testing thin config now. If i will have any problems, i will post here.
Thay xorg.conf is generated by hwd on my previous distro: archlinux. |
EDIT: unforcunatly my mouse "cut off" about after 10 minutes, and now after about 1 minute after startx
At this moment mouse in kde is not reacting. I have no problems in windows with my mouse, so i think it's xorg's or kde problem.
I think this could be kde problem, becouse i had same problem, then i was using arch linux with kde 3.4.1 and when i was using fluxbox about an hour in gentoo i had no problems... |
|
| Back to top |
|
|
elephant
n00b
Joined: 08 Jun 2005
Posts: 39
Location: Serbia
|
| Posted: Thu Jul 21, 2005 9:25 pm Post subject: |
|
|
| Have you tried setting the device to /dev/input/mice? |
|
| Back to top |
|
|
Master Shake
l33t
Joined: 10 Apr 2005
Posts: 755
Location: Wilmington, Delaware
|
| Posted: Thu Jul 21, 2005 9:34 pm Post subject: |
|
|
| elephant wrote: | | Have you tried setting the device to /dev/input/mice? |
Isn't that just for usb mice?
Here's my xorg for my mouse I use an mx1000.
| Code: | Identifier "Logitech MX1000"
Driver "mouse"
Option "Protocol" "auto"
Option "Dev Name" "Logitech USB Receiver"
Option "Dev Phys" "usb-0000:00:10.0-1/input0"
Option "Device" "/dev/input/mice"
Option "Buttons" "12"
Option "ZAxisMapping" "11 12"
Option "Resolution" "800" |
Try putting the physical address in there too.
_________________
System Specs:
64-bit gentoo linux
Q6600 @ 3.2Ghz
P35 Chipset
4 Gigs 800mhz 4-4-4-12
Nvidia GeForce 8800 GTX @ 630mhz |
|
| Back to top |
|
|
elephant
n00b
Joined: 08 Jun 2005
Posts: 39
Location: Serbia
|
| Posted: Thu Jul 21, 2005 9:50 pm Post subject: |
|
|
| Master Shake wrote: | | elephant wrote: | | Have you tried setting the device to /dev/input/mice? |
Isn't that just for usb mice? |
Hmm, I guess. Maybe after attaching it to the usb port (if possible), the mouse would behave differently? What is /dev/input/mouse0,1... for by the way? |
|
| Back to top |
|
|
Zolookas
n00b
Joined: 19 Jul 2005
Posts: 21
|
| Posted: Fri Jul 22, 2005 8:10 am Post subject: |
|
|
I have PS/2 mouse (old usb mouse broken  )
After another mouse cut off i've turned off X server and i was typing startx when my keyboard cut off
Serious compactibility problems, i am disabling kernel joystic support maybe it's causing problems. I will post my .config here. I have absolutely no problems with my peripherial using ms windows. |
|
| Back to top |
|
|
skellr
l33t
Joined: 18 Jun 2005
Posts: 988
Location: The Village, Portmeirion
|
| Posted: Fri Jul 22, 2005 10:42 am Post subject: |
|
|
I would try another Protocol, I remember getting some nasty behavior from mine.
| Code: | Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
EndSection |
|
|
| Back to top |
|
|
billium
Apprentice
Joined: 22 Mar 2003
Posts: 185
|
| Posted: Fri Jul 22, 2005 7:08 pm Post subject: |
|
|
I would agree with Rainskellr but try protocol imps/2 this works well for my logitech mouse.
I did use protocol auto but sometimes the plug and play would not get the correct protocol though the kvm I use.
Billy |
|
| Back to top |
|
|
Zolookas
n00b
Joined: 19 Jul 2005
Posts: 21
|
| Posted: Thu Aug 04, 2005 11:20 am Post subject: |
|
|
I am really annoyed
90% of cut off's happens when i hold some buttons pressed on keyboard and pry to move my mouse 
Also my keyboard (Logitech office internet) sometimes continues typing letter then i release buton |
|
| Back to top |
|
|
Major
Apprentice
Joined: 27 Feb 2004
Posts: 198
Location: Sherbrooke, Qc, Canada
|
| Posted: Thu Aug 04, 2005 3:20 pm Post subject: |
|
|
| Zolookas wrote: | I am really annoyed
90% of cut off's happens when i hold some buttons pressed on keyboard and pry to move my mouse
Also my keyboard (Logitech office internet) sometimes continues typing letter then i release buton |
I found a temporary solution for you and for me
this disable the effect of key holding so you wont keep typing after releasing.
I'm having the same trouble with my keyboard and mouse cant find a way to solve it.
_________________
Major over and out |
|
| Back to top |
|
|
Major
Apprentice
Joined: 27 Feb 2004
Posts: 198
Location: Sherbrooke, Qc, Canada
|
| Posted: Wed Aug 17, 2005 7:36 pm Post subject: |
|
|
I may have found the issue about the mouse randomly clicking ....
| Code: | | # lspci -v | grep USB |
_________________
Major over and out |
|
| Back to top |
|
|
|
Kernel & Hardware
