| View previous topic :: View next topic |
| Author |
Message |
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
 Posted: Mon Jan 03, 2005 3:31 pm Post subject: [SOLVED]ASUS P5GDC Deluxe - Now we have snd-hda-intel & |
 |
|
I'm having a lot of trouble with my recently upgraded motherboard.
According to Keylabs Linux Compatibility
http://www.linuxtested.com/results/asus_p5gdc_deluxe.html
the Marvell Yukon Network card works fine, after the patch ^^
So I removed the Marvell Yukon module "sk98lin" & tried to patch the kernel with the driver from http://www.marvell.com
But I think the patch doesn't work with gentoo-dev-sources, it only gives me error screen.
Another problem I have is with the CMI9880 sound codec.
I did some research in this forum, in the google, etc...
What I find out is that I have wait until the new alsa-driver comes out.
I tried with Azalia module "snd_azx" of 1.0.8rc1 and failed.
Is there any person using this board successfully with Gentoo???
Last edited by hamletmun on Wed Apr 19, 2006 8:14 pm; edited 2 times in total |
|
| Back to top |
|
 |
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Mon Jan 03, 2005 3:43 pm Post subject: Screen of "lspci -i pci.ids -v" |
|
|
Newer PCI database from http://pciids.sourceforge.net.
| Code: |
#lspci -i pci.ids -v
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev
04)
Subsystem: Intel Corp. 915G/P/GV Processor to I/O Controller
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [2109]
0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04) (p
rog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: cdf00000-cfffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Expansion ROM at 0000e000 [disabled] [size=4K]
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-
Capabilities: [a0] #10 [0141]
0000:00:1b.0 Class 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High De
finition Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc.: Unknown device 813d
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cdcf4000 (64-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable
-
Capabilities: [70] #10 [0091]
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Exp
ress Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Expansion ROM at 0000d000 [disabled] [size=4K]
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Exp
ress Port 2 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: cde00000-cdefffff
Expansion ROM at 0000c000 [disabled] [size=4K]
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 9880 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 9c00 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at a000 [size=32]
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at a080 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at cdcff800 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3) (prog-if 01 [Subt
ractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: cdd00000-cddfffff
Capabilities: [50] #0d [0000]
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridg
e (rev 03)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE
Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
0000:00:1f.2 IDE interface: Intel Corp. 82801FR/FRW (ICH6R/ICH6RW) SATA Controll
er (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc.: Unknown device 2601
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19
I/O ports at ac00
I/O ports at a880 [size=4]
I/O ports at a800 [size=8]
I/O ports at a480 [size=4]
I/O ports at a400 [size=16]
Memory at cdcffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: medium devsel, IRQ 19
I/O ports at 0400 [size=32]
0000:01:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 808b
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at cddff000 (32-bit, non-prefetchable)
Memory at cddf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
0000:01:09.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160 Ultra160 SCSI Controller
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 17
BIST result: 00
I/O ports at b800 [disabled] [size=cdda0000]
Memory at cddfe000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 00020000 [disabled]
Capabilities: [dc] Power Management version 2
0000:01:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at bc00 [size=cddc0000]
Memory at cddffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 00020000 [disabled]
Capabilities: [dc] Power Management version 1
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit Ethernet Controller (rev 15)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet Controller (Asus)
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at cdefc000 (64-bit, non-prefetchable) [size=cdec0000]
I/O ports at c800 [size=256]
Expansion ROM at 00020000 [disabled]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Capabilities: [e0] #10 [0011]
0000:04:00.0 VGA compatible controller: nVidia Corporation NV36 [GeForce PCX 5750] (rev a2) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 9691
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cf000000 (32-bit, non-prefetchable) [size=cdfe0000]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 00020000 [disabled]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [78] #10 [0011] |
|
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Mon Jan 03, 2005 10:17 pm Post subject: Now using sk98lin with no problem ^^ |
|
|
I downloaded the driver from SysKonnect :
http://www.syskonnect.com/syskonnect/support/driver/htm/sk9e21_lin.htm
http://www.syskonnect.com/syskonnect/support/driver/zip/linux/install-7_09.tar.bz2
With this driver, I could make a patch for gentoo-dev-sources-2.6.9-r13 without any problem.
Asus P5GDC Delux - PCI information of the Marvell 88E8053 Gigabit Ethernet
| Code: | 0000:02:00.0 Ethernet controller: Galileo Technology Ltd.: Unknown device 4362 (rev 15)
Subsystem: Asustek Computer, Inc.: Unknown device 8142
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at cdefc000 (64-bit, non-prefetchable) [size=cdec0000]
I/O ports at c800 [size=256]
Expansion ROM at 00020000 [disabled]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Capabilities: [e0] #10 [0011] |
|
|
| Back to top |
|
|
Robin79
l33t
Joined: 18 Oct 2003
Posts: 632
Location: /home/valdemarsvik
|
| Posted: Mon Jan 03, 2005 11:12 pm Post subject: |
|
|
I have a ASUS P5AD2 Deluxe and it works great i use the nitro patchest wich ahs sklin in it and the alsa driver you are talking about have i emerged and it works not perfect but works.. What exactly are you having for trouble?
_________________
Gentoo 2005.0
ASUS P5AD2 Deluxe MB
Intel P4 3.2GHz
PCI-E Nvidia Geforce PCX 5750
--------------------
Registered Linux User Nr # 319050 http://counter.li.org |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Mon Jan 03, 2005 11:54 pm Post subject: Which kernel??? |
|
|
I'm using gentoo-dev-sources-2.6.9-r13
The sk98lin module doesn't work with my network card.
But I already resolved that problem as I explained before, with the patch from Syskonnect.
And the snd_azx module doesn't even exist in my kernel source.
So I emerged alsa-driver-1.0.7-r4, but without any result.
I could load the module, but I can't get any sound.
And in the alsamixer utility, I can only change the volume of "capture" (no idea what it is)
So.... just waiting for more replies  |
|
| Back to top |
|
|
necik
n00b
Joined: 17 Sep 2004
Posts: 12
Location: Poland
|
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Tue Jan 04, 2005 8:55 pm Post subject: Let me try it |
|
|
Thank you for the link.
I'm gonna try it later, and post the result here. |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Tue Jan 04, 2005 10:57 pm Post subject: Installing ALSA from CVS tree |
|
|
What I tried...
You need to have "cvs, autoconf, automake"
| Code: |
cvs -d ':pserver:anonymous@cvs.alsa-project.org:/cvsroot/alsa' login
cvs -z3 -d ':pserver:anonymous@cvs.alsa-project.org:/cvsroot/alsa' co -P .
cd alsa-driver
make ALSAKERNELDIR=../alsa-kernel all-deps
aclocal
autoconf
./configure --with-isapnp=no --with-sequencer=no --with-oss=yes --with-cards=azx
make dep
make
make install
|
It still doesn't work!!!!!!!!!!!!!!!!!!!!!!!! |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Wed Jan 12, 2005 2:52 pm Post subject: Gentoo-dev-sources-2.6.10-r4 |
|
|
The sk98lin patch I used for gentoo-dev-sources-2.6.9-r13,
seems to be included in gentoo-dev-sources-2.6.10-r4
But when I compile it, it doesn't work, I don't know why.
Any information regard this?
*****************-_-************************
Sorry, I made a mistake.
You must unload sk98lin module, before making the patch file.
If you don't, it will say that your kernel source is already up to date.
Last edited by hamletmun on Mon Mar 07, 2005 9:14 pm; edited 1 time in total |
|
| Back to top |
|
|
necik
n00b
Joined: 17 Sep 2004
Posts: 12
Location: Poland
|
| Posted: Thu Jan 13, 2005 7:03 am Post subject: |
|
|
I'm using my own compiled kernel 2.6.10 with this patch. It's the newer one.
_________________
-= Include Your Signature Here =- |
|
| Back to top |
|
|
cfregin
n00b
Joined: 17 Jan 2005
Posts: 2
|
| Posted: Mon Jan 17, 2005 2:25 pm Post subject: Solved network problem on P5AD2 |
|
|
I just installed gentoo on a P5AD2. I used the linux driver from the asus page. www.asus.com -> country -> Motherboards -> P5AD5 -> Downloads -> 8053_other.zip.
I created a patch with the install.sh and patched linux-2.6.9-gentoo-r1. Select the Driver under Network 1000 MBit and do a make. The build will fail in 2 lines of the file linux/drivers/net/sk98lin/skge.c because SK_NET_DEVICE has no member 'last_stats'. I just deleted the lines and recompiled. I do not know what impact does this have on the system but the card is working. (i have not tried to use features like network stats but downloading and surfing is enough for me *g* )
Hope that helps. It is just a workarround. |
|
| Back to top |
|
|
necik
n00b
Joined: 17 Sep 2004
Posts: 12
Location: Poland
|
| Posted: Tue Feb 01, 2005 12:10 am Post subject: |
|
|
OK now! Sound Works!
I have compiled myself alsa driver 1.0.8
There are problems to use mixer, but sound is clean.
I have watched some video and listen some music.
_________________
-= Include Your Signature Here =- |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Fri Mar 11, 2005 2:08 am Post subject: Alsa works fine!!!! |
|
|
The ebuild of Alsa-driver is up to date now.
With snd-azx module from 1.0.8rc, you couldn't adjust the volume.
Now, with 1.0.8, you can do it without any problem. |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Sun Mar 13, 2005 10:17 pm Post subject: Contents of my make.conf |
|
|
Applications I use mainly:
windowmaker
mplayer
firefox
thunderbird
gaim
xchat
gkrellm
xmms
...
| Code: | CFLAGS="-O2 -march=prescott -msse -msse2 -msse3 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j3"
USE="-3dnow -arts alsa cdr cjk gtk gtk2 java -kde mmx mmx2 network nptl nvidia -qt real rtc sse sse2 tiff ucs2 unicode v4l vdesktop xv xvid xvmc"
ALSA_CARDS="azx" |
|
|
| Back to top |
|
|
nomind
Apprentice
Joined: 03 Feb 2005
Posts: 270
|
| Posted: Sat Mar 19, 2005 12:42 am Post subject: |
|
|
I'm using a very similar mobo (P5GDC-V deluxe), and the only thing I've got working on kernel 2.6.9r1 is the network. After much frustration, I finally found out that sk98lin can't be successfully integrated into the kernel, and has to be compiled as a module  . I have to ask you though, hamletmun, have you managed to get the 915G chipset working properly? I'm still struggling to get the refresh rate above 60Hz  . |
|
| Back to top |
|
|
ageheim
n00b
Joined: 15 Apr 2005
Posts: 22
Location: Sweden
|
| Posted: Mon Apr 18, 2005 7:09 am Post subject: Tip: Styles can be applied quickly to selected text. |
|
|
Hmmm, this could be quite interesting, I'm writing a reply using links2 since I'm just in the middle of emerging e17
Anyway, to the problem with sk98lin; I recently installed a new kernel 2.6.11-gentoo-r6 (with support for the nic added as a module) and found that an error occured while installing the Marvell sk98lin module. This due to an outdated driver (7.07). so I just downloaded the 8.16 driver and voila!
I will now see to the sound problem and come back when it's solved.
Good Luck to you all! =) |
|
| Back to top |
|
|
ageheim
n00b
Joined: 15 Apr 2005
Posts: 22
Location: Sweden
|
| Posted: Mon Apr 18, 2005 5:59 pm Post subject: |
|
|
| necik wrote: | OK now! Sound Works!
I have compiled myself alsa driver 1.0.8
There are problems to use mixer, but sound is clean.
I have watched some video and listen some music.
|
This is a cutout from https://forums.gentoo.org/viewtopic-t-284404-highlight-sbin+alsactl.html
Essentially, it describes a means to force install a file for the Azalia drivers.
http://weintraub.homeip.net/driver_audio_azalia_linux.tar.bz2
Do the following:
Code:
# cd ~/
# mkdir sound
# cd sound
# wget http://weintraub.homeip.net/driver_audio_azalia_linux.tar.bz2
# tar -xvjpf driver_audio_azalia_linux.tar.bz2
# ACCEPT_KEYWORDS="~x86" emerge -f alsa-driver
# cd azx-alsa-drop-driver-1.1.2a
# cp /usr/portage/distfiles/alsa-driver-1.0.X.tar.bz2 .
# tar -xvjpf alsa-driver-1.0.X.tar.bz2 (where X is your version of alsa-driver)
# ln -s alsa-driver-1.0.X/ alsa-driver
# ./build.sh
# ./build.sh install
Then, modify the /etc/modules.d/alsa to look like the following
Code:
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $
# ALSA portion
# OSS/Free portion
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
alias snd-card-0 snd-azx
## OSS/Free portion
##alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
Run Code:
modules-update
Then
Code:
/etc/init.d/alsasound restart
This worked for me, though I had to download alsa-drivers manually ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.8.tar.bz2
I can't adjust volume for pcm but at least the sound is working once the PCM is unmuted. |
|
| Back to top |
|
|
augury
l33t
Joined: 22 May 2004
Posts: 722
Location: philadelphia
|
| Posted: Wed Jun 29, 2005 7:15 pm Post subject: |
|
|
I used the 8.16 sk98lin source from the marvell site (probably samething) w/ gcc4 on 2.6.12-mm2 and except for a couple of minor stops it works well compiled in. I think you need it as a mod if you want to set things like autoneg, speed, duplex, additional ports in case you trip over your wires alot. The sound seems to be running on the intel hda.
this is asus's P5AD2-E-Premium
| Code: |
/proc/asound # cat modules
0 snd_hda_intel
/proc/asound # cat devices
1: : sequencer
17: [0- 1]: digital audio playback
25: [0- 1]: digital audio capture
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
0: [0- 0]: ctl
33: : timer
/proc/asound # cat modules
0 snd_hda_intel
/proc/asound/Intel # cat codec#0
Codec: C-Media CMI9880
Address: 0
Vendor Id: 0x434d4980
Subsystem Id: 0x0
Revision Id: 0x90002
Default PCM: rates 0x540, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
. . .
lsmod
Module Size Used by
8250_pnp 8576 0
8250 54340 1 8250_pnp
serial_core 22656 1 8250
analog 12832 0
ns558 4356 0
gameport 14984 3 analog,ns558
parport_pc 47428 0
parport 41544 1 parport_pc
eth1394 20616 0
ohci1394 51892 0
ieee1394 311480 2 eth1394,ohci1394
ahci 10116 0
generic 4228 0 [permanent]
ehci_hcd 97416 0
uhci_hcd 84240 0
snd_hda_intel 14464 0
snd_hda_codec 97536 1 snd_hda_intel
snd_pcm 134020 2 snd_hda_intel,snd_hda_codec
snd_page_alloc 11656 2 snd_hda_intel,snd_pcm
shpchp 118788 0
snd_seq 79504 0
snd_seq_device 7948 1 snd_seq
snd_timer 33284 2 snd_pcm,snd_seq
snd 58980 7 snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_seq_device,snd_timer
soundcore 9056 1 snd
usbcore 134524 3 ehci_hcd,uhci_hcd
dm_mod 64796 0
lshw -C multimedia
*-multimedia
description: Multimedia controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@00:1b.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=HDA Intel
resources: iomemory:cfcf4000-cfcf7fff irq:169
lshw -C network
*-network
description: Ethernet interface
product: 88E8053 Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@02:00.0
logical name: eth1
version: 15
serial: 00:11:d8:d6:05:38
size: 1GB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegociation
configuration: autonegociation=on broadcast=yes driver=sk98lin driverversion=8.16.2.3 (02) duplex=full firmware=N/A ip=192.168.123.175 multicast=yes port=twisted pair speed=1GB/s
resources: iomemory:cfefc000-cfefffff ioport:c800-c8ff irq:201
*-network DISABLED
description: Ethernet interface
product: 3c905 100BaseTX [Boomerang]
vendor: 3Com Corporation
physical id: 9
bus info: pci@01:09.0
logical name: eth0
version: 00
serial: 00:60:97:d3:f9:ae
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegociation
configuration: autonegociation=on broadcast=yes driver=3c59x driverversion=LK1.1.19 duplex=half link=no multicast=yes port=MII speed=10MB/s
resources: ioport:b800-b83f irq:201
lspci
0000:00:00.0 Host bridge: Intel Corporation 925X/XE Memory Controller Hub (rev 0e)
0000:00:01.0 PCI bridge: Intel Corporation 925X/XE PCI Express Root Port (rev 0e)
0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
0000:00:1f.2 Class 0106: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 04)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
0000:01:03.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
0000:01:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 15)
0000:04:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5e4b
0000:04:00.1 Display controller: ATI Technologies Inc: Unknown device 5e6b
|
The other sata and ide and hopefully Marvell interface would show up if enabled in bios.
All I need now is the ati driver. |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Sun Jul 17, 2005 12:56 pm Post subject: module name snd-azx is now changed to snd-hda-intel |
|
|
Before update alsa-driver from 1.0.8 to 1.0.9b, you must change:
| Code: | /etc/make.conf
ALSA_CARDS="azx" -> ALSA_CARDS="hda-intel" |
| Code: | /etc/modules.d/alsa
snd-azx -> snd-hda-intel |
|
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Fri Jul 22, 2005 4:20 am Post subject: linux-headers problem installing sk98lin module |
|
|
I'm using gentoo-sources-2.6.12-r6 with linux-headers-2.6.11-r2
The problem occurs when I try to install sk98lin module automatically using
http://www.syskonnect.com/syskonnect/support/driver/zip/linux/install-8_23.tar.bz2
log says that the kernel headers don't match with the kernel source.
You have to choose the second option "generate patch", then
| Code: | cd /usr/src/linux
cat /path/sk98lin_vx.xx.x.x_kernelversion_patch | patch -p1 |
Of course, you have to re-configure & re-compile the kernel
| Code: | make menuconfig
make
make modules_install |
|
|
| Back to top |
|
|
ak74
n00b
Joined: 28 Jan 2005
Posts: 52
|
| Posted: Fri Jul 22, 2005 7:13 am Post subject: |
|
|
Thank you for your guide, but two questions arised:
1) Is volume control working? (with latest alsa) I can only turn sound on and off.
2) Can you control fan speed with lm_sensors? I can't. |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Fri Jul 22, 2005 9:44 pm Post subject: The answers... |
|
|
1) You're right. snd-hda-intel module is still in development.
Volume control doesn't work yet. And sometimes you get a lot of extra noise 
2) I never tried to control fan speed with lm-sensor, sorry. |
|
| Back to top |
|
|
ak74
n00b
Joined: 28 Jan 2005
Posts: 52
|
| Posted: Sat Jul 23, 2005 10:01 am Post subject: |
|
|
Thank you. We have to wait.
By the way. I have no extra noise. Everything sounds ok. |
|
| Back to top |
|
|
hamletmun
Tux's lil' helper
Joined: 13 Jun 2002
Posts: 111
Location: Buenos Aires, Argentina
|
| Posted: Mon Jul 25, 2005 5:07 pm Post subject: AK74... about lm-sensors |
|
|
About fan speed control with lm_sensors:
The most important userspace tools (sensors, sensors-detect, the i2c diagnostic tools) have been updated to work with 2.6 kernels, but some other are still not compatible (eeprom decoder and fan speed control scripts, for instance).
http://secure.netroedge.com/~lm78/kernel26.html |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
