| View previous topic :: View next topic |
| Author |
Message |
Ghostryder
Apprentice
Joined: 10 Dec 2003
Posts: 216
|
 Posted: Tue Aug 09, 2005 8:47 am Post subject: Distcc not running |
 |
|
Hi,
in my case I have a notebook and a desktop machine and I want to use distcc for compiling. The desktop machine is an AM XP and the notebook a Pentium M.
Do I have to use cross compiling therefore? I'm thinking not because both are x86 architctures but I'm not completely sure.
So here's what if done. I emerged 'distcc' on both machines. Then I edited '/etc/make.conf' on both. They look as follows:
Notebook | Code: |
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-O2 -march=pentium3 -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
USE="mmx gtk gnome qt kde cdr dvd alsa samba acpi avi cups dvdr encode ethereal mpeg oggvorbis truetype xmms xinerama imlib png unicode"
MAKEOPTS="-j5"
ACCEPT_KEYWORDS="~x86"
PORTDIR_OVERLAY=/usr/local/portage
FEATURES="distcc" |
and desktop | Code: |
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-O2 -march=athlon-xp -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
ACCEPT_KEYWORDS="~x86"
USE="-gtk -gnome kde qt alsa cdr dvd samba avi cups dvdr encode ethereal mpeg oggvorbis truetype xmms xinerama amarok"
FEATURES="distcc"
MAKEOPTS="-j5" |
Afterwards I did at the notebook:
| Code: | | distcc-config --set-hosts 192.168.xxx.xxx //IP of the desktop |
and same on the desktop
| Code: | | distcc-config --set-hosts 192.168.xxx.xxx //IP of the notebook |
At last I changed /etc/conf.d/distccd on both to:
| Code: |
# Copyright 1999-2004 Gentoo Foundation
# $Header: /var/cvsroot/gentoo-x86/sys-devel/distcc/files/2.18/conf,v 1.2 2004/10/21 16:20:10 vapier Exp $
# distccd configuration file
DISTCCD_OPTS=""
# this is the distccd executable
DISTCCD_EXEC="/usr/bin/distccd"
# this is where distccd will store its pid file
DISTCCD_PIDFILE="/var/run/distccd/distccd.pid"
# set this option to run distccd with extra parameters
# Default port is 3632. For most people the default is okay.
DISTCCD_OPTS="${DISTCCD_OPTS} --port 3632"
# Logging
# You can change some logging options here:
# --log-file FILE
# --log-level LEVEL [critical,error,warning, notice, info, debug]
#
# Leaving --log-file blank will log to syslog
# example: --log-file /dev/null --log-level warning
# example: --log-level critical
DISTCCD_OPTS="${DISTCCD_OPTS} --log-level critical"
# SECURITY NOTICE:
# It is HIGHLY recomended that you use the --listen option
# for increased security. You can specify an IP to permit connections
# from or a CIDR mask
# --listen accepts only a single IP
# --allow is now mandatory as of distcc-2.18.
# example: --allow 192.168.0.0/24
# example: --allow 192.168.0.5 --allow 192.168.0.150
# example: --listen 192.168.0.2
DISTCCD_OPTS="${DISTCCD_OPTS} --allow 192.168.xxx.xxx"
DISTCCD_OPTS="${DISTCCD_OPTS} --listen 192.168.xxx.xxx"
#DISTCCD_OPTS="${DISTCCD_OPTS} --listen 192.168.0.2"
# set this for niceness
# Default is 15
DISTCCD_NICE="15"
|
and restarted Distcc-Daemon on both machines.
I tried to compile something but just get the following message:
| Code: |
if i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../intl -O2 -march=pentium3 -fomit-frame-pointer -MT text.o -MD -MP -MF ".deps/text.Tpo" -c -o text.o text.c; \
then mv -f ".deps/text.Tpo" ".deps/text.Po"; else rm -f ".deps/text.Tpo"; exit 1; fi
distcc[19103] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
if i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../intl -O2 -march=pentium3 -fomit-frame-pointer -MT ttfont.o -MD -MP -MF ".deps/ttfont.Tpo" -c -o ttfont.o ttfont.c; \
then mv -f ".deps/ttfont.Tpo" ".deps/ttfont.Po"; else rm -f ".deps/ttfont.Tpo"; exit 1; fi
distcc[19107] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[19109] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
|
What have I done wrong?
thanks g. |
|
| Back to top |
|
 |
Ghostryder
Apprentice
Joined: 10 Dec 2003
Posts: 216
|
| Posted: Tue Aug 09, 2005 10:00 am Post subject: |
|
|
I uncommented the --listen entries in /etc/conf.d/distccd and now it seems to work. I'm just wondering a littlebit because whenI open distccmon-gui on both machines
there isn't anywhere a job listed although I'm running an emerge process and the processor on the desktop machine is at 99%. But why isn't it listed? |
|
| Back to top |
|
|
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5947
|
| Posted: Tue Aug 09, 2005 4:02 pm Post subject: |
|
|
IMO, distccmon is a piece of garbage. Use top on the distcc server and filter by user distcc.
--beugh
_________________
| Neddyseagoon wrote: | | The problem with leaving is that you can only do it once and it reduces your influence. |
banned from #gentoo since sept 2017 |
|
| Back to top |
|
|
Ghostryder
Apprentice
Joined: 10 Dec 2003
Posts: 216
|
| Posted: Tue Aug 09, 2005 7:13 pm Post subject: |
|
|
| Yeah, that's what I already did. So I saw that distcc is working properly. But thanks for answering... |
|
| Back to top |
|
|
|
Networking & Security
