s3 savage dri error on start of x

jut1981 · n00b Joined: 29 Aug 2005 Posts: 8

hello,

I am having getting my savage card to work so i thought I would post some information which may help some one understand my problem:

My xorg.log

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.13-rc5-mm1 i686 [ELF]
Current Operating System: Linux localhost 2.6.13-rc5-mm1 #9 SMP PREEMPT Sat Sep 10 03:16:55 Local time zone must be set-- i686
Build Date: 01 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 10 03:37:37 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "monitor"
(**) | |-->Device "S3 SuperSavage"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 1179,0001 rev 05 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 05 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2482 card 1179,0001 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2484 card 1179,0001 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,248a card 1179,0001 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,2485 card 1179,0001 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,2486 card 1179,0001 rev 02 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8c2e card 1179,0001 rev 05 class 03,00,00 hdr 00
(II) PCI: 02:08:0: chip 8086,1031 card 1179,0001 rev 42 class 02,00,00 hdr 00
(II) PCI: 02:0b:0: chip 1179,0617 card 4000,0000 rev 32 class 06,07,00 hdr 82
(II) PCI: 02:0b:1: chip 1179,0617 card 6000,0000 rev 32 class 06,07,00 hdr 82
(II) PCI: 02:0d:0: chip 1179,0805 card 1179,0001 rev 03 class 08,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xffe00000 - 0xffefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd6000000 - 0xdfffffff (0xa000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,10), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xff900000 - 0xff9fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:11:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x20000000 - 0x21ffffff (0x2000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:11:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x22000000 - 0x23ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) S3 Inc. SuperSavage IX/C SDR rev 5, Mem @ 0xffe80000/19, 0xdc000000/26, 0xd8000000/26, 0xd6000000/25, BIOS @ 0xffe00000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xff9fee00 - 0xff9fefff (0x200) MX[B]
[1] -1 0 0xff9ff000 - 0xff9fffff (0x1000) MX[B]
[2] -1 0 0x24000000 - 0x240003ff (0x400) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xffe00000 - 0xffe0ffff (0x10000) MX[B](B)
[5] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[7] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[8] -1 0 0xffe80000 - 0xffefffff (0x80000) MX[B](B)
[9] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[10] -1 0 0x0000c980 - 0x0000c9ff (0x80) IX[B]
[11] -1 0 0x0000ca00 - 0x0000caff (0x100) IX[B]
[12] -1 0 0x0000cdc0 - 0x0000cdff (0x40) IX[B]
[13] -1 0 0x0000ce00 - 0x0000ceff (0x100) IX[B]
[14] -1 0 0x0000cfa0 - 0x0000cfaf (0x10) IX[B]
[15] -1 0 0x0000cfe4 - 0x0000cfe4 (0x1) IX[B]
[16] -1 0 0x0000cfe8 - 0x0000cfe8 (0x1) IX[B]
[17] -1 0 0x0000cff4 - 0x0000cff4 (0x1) IX[B]
[18] -1 0 0x0000cff8 - 0x0000cff8 (0x1) IX[B]
[19] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[20] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xff9fee00 - 0xff9fefff (0x200) MX[B]
[1] -1 0 0xff9ff000 - 0xff9fffff (0x1000) MX[B]
[2] -1 0 0x24000000 - 0x240003ff (0x400) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xffe00000 - 0xffe0ffff (0x10000) MX[B](B)
[5] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[7] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[8] -1 0 0xffe80000 - 0xffefffff (0x80000) MX[B](B)
[9] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[10] -1 0 0x0000c980 - 0x0000c9ff (0x80) IX[B]
[11] -1 0 0x0000ca00 - 0x0000caff (0x100) IX[B]
[12] -1 0 0x0000cdc0 - 0x0000cdff (0x40) IX[B]
[13] -1 0 0x0000ce00 - 0x0000ceff (0x100) IX[B]
[14] -1 0 0x0000cfa0 - 0x0000cfaf (0x10) IX[B]
[15] -1 0 0x0000cfe4 - 0x0000cfe4 (0x1) IX[B]
[16] -1 0 0x0000cfe8 - 0x0000cfe8 (0x1) IX[B]
[17] -1 0 0x0000cff4 - 0x0000cff4 (0x1) IX[B]
[18] -1 0 0x0000cff8 - 0x0000cff8 (0x1) IX[B]
[19] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[20] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B)
[1] -1 0 0x00100000 - 0x23ffffff (0x23f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B)
[1] -1 0 0x00100000 - 0x23ffffff (0x23f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff9fee00 - 0xff9fefff (0x200) MX[B]
[6] -1 0 0xff9ff000 - 0xff9fffff (0x1000) MX[B]
[7] -1 0 0x24000000 - 0x240003ff (0x400) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xffe00000 - 0xffe0ffff (0x10000) MX[B](B)
[10] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[12] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[13] -1 0 0xffe80000 - 0xffefffff (0x80000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[17] -1 0 0x0000c980 - 0x0000c9ff (0x80) IX[B]
[18] -1 0 0x0000ca00 - 0x0000caff (0x100) IX[B]
[19] -1 0 0x0000cdc0 - 0x0000cdff (0x40) IX[B]
[20] -1 0 0x0000ce00 - 0x0000ceff (0x100) IX[B]
[21] -1 0 0x0000cfa0 - 0x0000cfaf (0x10) IX[B]
[22] -1 0 0x0000cfe4 - 0x0000cfe4 (0x1) IX[B]
[23] -1 0 0x0000cfe8 - 0x0000cfe8 (0x1) IX[B]
[24] -1 0 0x0000cff4 - 0x0000cff4 (0x1) IX[B]
[25] -1 0 0x0000cff8 - 0x0000cff8 (0x1) IX[B]
[26] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[27] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "savage"
(II) Loading /usr/lib/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 2.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) SAVAGE: driver (version 2.0.0) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SuperSavage found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B)
[1] -1 0 0x00100000 - 0x23ffffff (0x23f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff9fee00 - 0xff9fefff (0x200) MX[B]
[6] -1 0 0xff9ff000 - 0xff9fffff (0x1000) MX[B]
[7] -1 0 0x24000000 - 0x240003ff (0x400) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xffe00000 - 0xffe0ffff (0x10000) MX[B](B)
[10] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[12] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[13] -1 0 0xffe80000 - 0xffefffff (0x80000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[17] -1 0 0x0000c980 - 0x0000c9ff (0x80) IX[B]
[18] -1 0 0x0000ca00 - 0x0000caff (0x100) IX[B]
[19] -1 0 0x0000cdc0 - 0x0000cdff (0x40) IX[B]
[20] -1 0 0x0000ce00 - 0x0000ceff (0x100) IX[B]
[21] -1 0 0x0000cfa0 - 0x0000cfaf (0x10) IX[B]
[22] -1 0 0x0000cfe4 - 0x0000cfe4 (0x1) IX[B]
[23] -1 0 0x0000cfe8 - 0x0000cfe8 (0x1) IX[B]
[24] -1 0 0x0000cff4 - 0x0000cff4 (0x1) IX[B]
[25] -1 0 0x0000cff8 - 0x0000cff8 (0x1) IX[B]
[26] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[27] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B)
[1] -1 0 0x00100000 - 0x23ffffff (0x23f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff9fee00 - 0xff9fefff (0x200) MX[B]
[6] -1 0 0xff9ff000 - 0xff9fffff (0x1000) MX[B]
[7] -1 0 0x24000000 - 0x240003ff (0x400) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xffe00000 - 0xffe0ffff (0x10000) MX[B](B)
[10] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[12] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[13] -1 0 0xffe80000 - 0xffefffff (0x80000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[20] -1 0 0x0000c980 - 0x0000c9ff (0x80) IX[B]
[21] -1 0 0x0000ca00 - 0x0000caff (0x100) IX[B]
[22] -1 0 0x0000cdc0 - 0x0000cdff (0x40) IX[B]
[23] -1 0 0x0000ce00 - 0x0000ceff (0x100) IX[B]
[24] -1 0 0x0000cfa0 - 0x0000cfaf (0x10) IX[B]
[25] -1 0 0x0000cfe4 - 0x0000cfe4 (0x1) IX[B]
[26] -1 0 0x0000cfe8 - 0x0000cfe8 (0x1) IX[B]
[27] -1 0 0x0000cff4 - 0x0000cff4 (0x1) IX[B]
[28] -1 0 0x0000cff8 - 0x0000cff8 (0x1) IX[B]
[29] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[30] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) SAVAGE(0): Option "DmaMode" "None"
(**) SAVAGE(0): Option "AGPMode" "4"
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 15168 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics Incorporated. Paramount video BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Graphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0
(--) SAVAGE(0): Chip: id 8c2e, "SuperSavage/IXC 64"
(--) SAVAGE(0): Engine: "SuperSavage"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(**) SAVAGE(0): DMA disabled
(**) SAVAGE(0): Using AGP 4x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(II) SAVAGE(0): mapping MMIO @ 0xffe80000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(**) SAVAGE(0): videoram = 16384k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 332.182 MHz
(--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1024x768
(--) SAVAGE(0): Found 14 modes at this depth:
[10e] 320 x 200, 70Hz
[111] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz
[114] 800 x 600, 60Hz, 75Hz, 85Hz, 100Hz
[117] 1024 x 768, 60Hz, 75Hz, 85Hz, 100Hz
[11a] 1280 x 1024, 60Hz, 75Hz, 85Hz
[11d] 640 x 400, 70Hz
[122] 1600 x 1200, 60Hz, 75Hz, 85Hz
[133] 320 x 240, 72Hz
[138] 1920 x 1440, 60Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[173] 720 x 480, 75Hz
[17e] 720 x 576, 75Hz
(II) SAVAGE(0): monitor: Using hsync range of 31.50-48.50 kHz
(II) SAVAGE(0): monitor: Using vrefresh range of 50.00-70.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11d at 70Hz.
(II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 10e at 70Hz.
(II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x768" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 576x384 54Hz.
(II) SAVAGE(0): Not using default mode "576x384" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz.
(II) SAVAGE(0): Not using default mode "800x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) SAVAGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) SAVAGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) SAVAGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(==) SAVAGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd6000000 - 0xd7ffffff (0x2000000) MS[B]
[1] 0 0 0xd8000000 - 0xdbffffff (0x4000000) MS[B]
[2] 0 0 0xdc000000 - 0xdfffffff (0x4000000) MS[B]
[3] 0 0 0xffe80000 - 0xffefffff (0x80000) MS[B]
[4] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B)
[5] -1 0 0x00100000 - 0x23ffffff (0x23f00000) MX[B]E(B)
[6] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[7] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[8] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[9] -1 0 0xff9fee00 - 0xff9fefff (0x200) MX[B]
[10] -1 0 0xff9ff000 - 0xff9fffff (0x1000) MX[B]
[11] -1 0 0x24000000 - 0x240003ff (0x400) MX[B]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[13] -1 0 0xffe00000 - 0xffe0ffff (0x10000) MX[B](B)
[14] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[15] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[16] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[17] -1 0 0xffe80000 - 0xffefffff (0x80000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[24] -1 0 0x0000c980 - 0x0000c9ff (0x80) IX[B]
[25] -1 0 0x0000ca00 - 0x0000caff (0x100) IX[B]
[26] -1 0 0x0000cdc0 - 0x0000cdff (0x40) IX[B]
[27] -1 0 0x0000ce00 - 0x0000ceff (0x100) IX[B]
[28] -1 0 0x0000cfa0 - 0x0000cfaf (0x10) IX[B]
[29] -1 0 0x0000cfe4 - 0x0000cfe4 (0x1) IX[B]
[30] -1 0 0x0000cfe8 - 0x0000cfe8 (0x1) IX[B]
[31] -1 0 0x0000cff4 - 0x0000cff4 (0x1) IX[B]
[32] -1 0 0x0000cff8 - 0x0000cff8 (0x1) IX[B]
[33] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[34] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/modules/linux/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 15168 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics Incorporated. Paramount video BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Graphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0
(--) SAVAGE(0): mapping framebuffer @ 0xdc000000 with size 0x1000000
(==) SAVAGE(0): Write-combining range (0xdc000000,0x1000000)
(==) SAVAGE(0): Removed MMIO write-combining range (0xdc000000,0x1000000)
(==) SAVAGE(0): Removed MMIO write-combining range (0xdc000000,0x1000000)
(II) SAVAGE(0): Splitting WC range: base: 0xd8000000, size: 0x5000000
(==) SAVAGE(0): Write-combining range (0xdc000000,0x1000000)
(==) SAVAGE(0): Write-combining range (0xd8000000,0x5000000)
(II) SAVAGE(0): map aperture:0xb1888000
(II) SAVAGE(0): 4740 kB of Videoram needed for 3D; 16384 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
[drm] failed to load kernel module "savage"
(II) SAVAGE(0): [drm] drmOpen failed
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Using 1280 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) SAVAGE(0): Backing store disabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "PS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 7
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
SetClientVersion: 0 8

my xorg.conf
# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5 - 48.5

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-70

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

#EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "S3 SuperSavage"
Driver "savage"
Option "DmaMode" "None"
Option "AGPmode" "4"
VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "S3 SuperSavage"
Monitor "monitor"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
Mode 0666
EndSection

my dri.log install.sh log file

make DRM_MODULES=savage.o modules
make[1]: Entering directory `/root/dripkg/drm/linux-core'
+ ln -s ../shared-core/drm.h drm.h
+ ln -s ../shared-core/drm_sarea.h drm_sarea.h
+ ln -s ../shared-core/mga_dma.c mga_dma.c
+ ln -s ../shared-core/mga_drm.h mga_drm.h
+ ln -s ../shared-core/mga_drv.h mga_drv.h
+ ln -s ../shared-core/mga_irq.c mga_irq.c
+ ln -s ../shared-core/mga_state.c mga_state.c
+ ln -s ../shared-core/mga_ucode.h mga_ucode.h
+ ln -s ../shared-core/mga_warp.c mga_warp.c
+ ln -s ../shared-core/r128_drv.h r128_drv.h
+ ln -s ../shared-core/r128_drm.h r128_drm.h
+ ln -s ../shared-core/r128_cce.c r128_cce.c
+ ln -s ../shared-core/r128_state.c r128_state.c
+ ln -s ../shared-core/r128_irq.c r128_irq.c
+ ln -s ../shared-core/radeon_drv.h radeon_drv.h
+ ln -s ../shared-core/radeon_drm.h radeon_drm.h
+ ln -s ../shared-core/radeon_cp.c radeon_cp.c
+ ln -s ../shared-core/radeon_irq.c radeon_irq.c
+ ln -s ../shared-core/radeon_mem.c radeon_mem.c
+ ln -s ../shared-core/radeon_state.c radeon_state.c
+ ln -s ../shared-core/sis_drv.h sis_drv.h
+ ln -s ../shared-core/sis_drm.h sis_drm.h
+ ln -s ../shared-core/sis_ds.c sis_ds.c
+ ln -s ../shared-core/sis_ds.h sis_ds.h
+ ln -s ../shared-core/sis_mm.c sis_mm.c
+ ln -s ../shared-core/tdfx_drv.h tdfx_drv.h
+ ln -s ../shared-core/via_drm.h via_drm.h
+ ln -s ../shared-core/via_drv.h via_drv.h
+ ln -s ../shared-core/via_mm.h via_mm.h
+ ln -s ../shared-core/via_ds.h via_ds.h
+ ln -s ../shared-core/via_3d_reg.h via_3d_reg.h
+ ln -s ../shared-core/via_drv.c via_drv.c
+ ln -s ../shared-core/via_ds.c via_ds.c
+ ln -s ../shared-core/via_irq.c via_irq.c
+ ln -s ../shared-core/via_map.c via_map.c
+ ln -s ../shared-core/via_mm.c via_mm.c
+ ln -s ../shared-core/via_dma.c via_dma.c
+ ln -s ../shared-core/via_verifier.c via_verifier.c
+ ln -s ../shared-core/via_verifier.h via_verifier.h
+ ln -s ../shared-core/via_video.c via_video.c
+ ln -s ../shared-core/mach64_drv.h mach64_drv.h
+ ln -s ../shared-core/mach64_drm.h mach64_drm.h
+ ln -s ../shared-core/mach64_dma.c mach64_dma.c
+ ln -s ../shared-core/mach64_irq.c mach64_irq.c
+ ln -s ../shared-core/mach64_state.c mach64_state.c
+ ln -s ../shared-core/i915_drv.h i915_drv.h
+ ln -s ../shared-core/i915_drm.h i915_drm.h
+ ln -s ../shared-core/i915_irq.c i915_irq.c
+ ln -s ../shared-core/i915_mem.c i915_mem.c
+ ln -s ../shared-core/i915_dma.c i915_dma.c
+ ln -s ../shared-core/savage_drv.h savage_drv.h
+ ln -s ../shared-core/savage_drm.h savage_drm.h
+ ln -s ../shared-core/savage_bci.c savage_bci.c
+ ln -s ../shared-core/savage_state.c savage_state.c
rm -f linux
ln -s . linux
make -C /lib/modules/2.6.13-rc5-mm1/source SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
make[2]: Entering directory `/usr/src/linux-2.6.13-rc5-mm1'
CC [M] /root/dripkg/drm/linux-core/drm_auth.o
CC [M] /root/dripkg/drm/linux-core/drm_bufs.o
CC [M] /root/dripkg/drm/linux-core/drm_context.o
CC [M] /root/dripkg/drm/linux-core/drm_dma.o
CC [M] /root/dripkg/drm/linux-core/drm_drawable.o
CC [M] /root/dripkg/drm/linux-core/drm_drv.o
CC [M] /root/dripkg/drm/linux-core/drm_fops.o
CC [M] /root/dripkg/drm/linux-core/drm_ioctl.o
CC [M] /root/dripkg/drm/linux-core/drm_irq.o
CC [M] /root/dripkg/drm/linux-core/drm_lock.o
CC [M] /root/dripkg/drm/linux-core/drm_memory.o
CC [M] /root/dripkg/drm/linux-core/drm_proc.o
CC [M] /root/dripkg/drm/linux-core/drm_stub.o
CC [M] /root/dripkg/drm/linux-core/drm_vm.o
CC [M] /root/dripkg/drm/linux-core/drm_sysfs.o
CC [M] /root/dripkg/drm/linux-core/drm_pci.o
/root/dripkg/drm/linux-core/drm_pci.c:57:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:88:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:136:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:143:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:159:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:57:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:88:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:136:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:143:5: warning: "DRM_DEBUG_MEMORY" is not defined
/root/dripkg/drm/linux-core/drm_pci.c:159:5: warning: "DRM_DEBUG_MEMORY" is not defined
CC [M] /root/dripkg/drm/linux-core/drm_agpsupport.o
CC [M] /root/dripkg/drm/linux-core/drm_scatter.o
CC [M] /root/dripkg/drm/linux-core/drm_memory_debug.o
CC [M] /root/dripkg/drm/linux-core/ati_pcigart.o
CC [M] /root/dripkg/drm/linux-core/savage_drv.o
/root/dripkg/drm/linux-core/savage_drv.c: In function `postinit':
/root/dripkg/drm/linux-core/savage_drv.c:35: warning: implicit declaration of function `pci_pretty_name'
/root/dripkg/drm/linux-core/savage_drv.c:35: warning: format argument is not a pointer (arg

CC [M] /root/dripkg/drm/linux-core/savage_bci.o
CC [M] /root/dripkg/drm/linux-core/savage_state.o
LD [M] /root/dripkg/drm/linux-core/drm.o
LD [M] /root/dripkg/drm/linux-core/savage.o
Building modules, stage 2.
MODPOST
*** Warning: "pci_pretty_name" [/root/dripkg/drm/linux-core/savage.ko] undefined!
CC /root/dripkg/drm/linux-core/drm.mod.o
LD [M] /root/dripkg/drm/linux-core/drm.ko
CC /root/dripkg/drm/linux-core/savage.mod.o
LD [M] /root/dripkg/drm/linux-core/savage.ko
make[2]: Leaving directory `/usr/src/linux-2.6.13-rc5-mm1'
make[1]: Leaving directory `/root/dripkg/drm/linux-core'

i have drm enabled in kernel and agp and mtrr, if anyone knows what's wrong and how to fixit it will be appreciated.

thx,

Jut