| View previous topic :: View next topic |
| Author |
Message |
n0n
Guru
Joined: 13 Jun 2002
Posts: 355
|
 Posted: Thu Sep 29, 2005 2:11 pm Post subject: |
 |
|
| pjp wrote: | | *nod* Thanks. I'm on AMD64, and can't be that much of a guniea pig, so I'll have to wait. X is probably not a good place to cut one's ebuild teeth :D |
Heh, probably not. If you do, I just remembered that you'd have to make sure to get rid of the PROVIDES="virtual/*" in your modified Xorg ebuild, so that portage would let two of 'em be installed at once. That'd get in the way too otherwise. |
|
| Back to top |
|
 |
fca
Guru
Joined: 22 Feb 2003
Posts: 346
Location: Netherlands
|
| Posted: Sun Oct 02, 2005 2:00 pm Post subject: |
|
|
| arkaine wrote: | Hmmm...let me try and figure out how I'm gonna do this...
I have tried over and over, with no sucess, to get modular x to work. My xorg.conf seems fine. Also I dont get any errors when I startx, besides one
"(WW) ****INVALID MEM ALLOCATION**** b:0xe0000000 e:0xe8000000 correcting
*** If unresolved symbols were reported they may not
*** be the reason for the server aborting.
Backtrace:
0: X(xf86SigHandler+0x14a) [0x80bb2da]
1: [0xffffe420]
Fatal server error:
Caught signal 11. Server aborting.
XIO: Fatal IO Error 104 (Connection reset by peer) on X Server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
Man I wish I knew how to copy shit into links ( yah I know , use the middle click button...it doesn't work).
Anyways, I'm using the nvidia drivers (nvidia-kernel / nvidia-glx). I've tried emerging them multiple times, with different kernels. I talked with a guy from a different thread with what seemed to be the same problem, and he said adding
BusId "PCI:2:0:0"
and
Option "NvAGP "0"
helped him get it working. But I did that and I'm still xless. |
I have the same warning, but everything works for me (tm). modular X, nvidia-glx and nvidia-kernel |
|
| Back to top |
|
|
thubble
Tux's lil' helper
Joined: 16 May 2003
Posts: 119
Location: Winnipeg, Canada
|
| Posted: Sun Oct 02, 2005 5:07 pm Post subject: |
|
|
| arkaine wrote: | Hmmm...let me try and figure out how I'm gonna do this...
I have tried over and over, with no sucess, to get modular x to work. My xorg.conf seems fine. Also I dont get any errors when I startx, besides one
"(WW) ****INVALID MEM ALLOCATION**** b:0xe0000000 e:0xe8000000 correcting
*** If unresolved symbols were reported they may not
*** be the reason for the server aborting.
Backtrace:
0: X(xf86SigHandler+0x14a) [0x80bb2da]
1: [0xffffe420]
Fatal server error:
Caught signal 11. Server aborting.
XIO: Fatal IO Error 104 (Connection reset by peer) on X Server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
Man I wish I knew how to copy shit into links ( yah I know , use the middle click button...it doesn't work).
Anyways, I'm using the nvidia drivers (nvidia-kernel / nvidia-glx). I've tried emerging them multiple times, with different kernels. I talked with a guy from a different thread with what seemed to be the same problem, and he said adding
BusId "PCI:2:0:0"
and
Option "NvAGP "0"
helped him get it working. But I did that and I'm still xless. |
Are you using a >=2.6.14-rc2 kernel? I have exactly the same problem with that version; 2.6.14-rc1 and earlier work fine. |
|
| Back to top |
|
|
arkaine
n00b
Joined: 23 Jun 2004
Posts: 62
Location: Ohio
|
| Posted: Mon Oct 03, 2005 8:56 am Post subject: |
|
|
| thubble wrote: | | arkaine wrote: | Hmmm...let me try and figure out how I'm gonna do this...
I have tried over and over, with no sucess, to get modular x to work. My xorg.conf seems fine. Also I dont get any errors when I startx, besides one
"(WW) ****INVALID MEM ALLOCATION**** b:0xe0000000 e:0xe8000000 correcting
*** If unresolved symbols were reported they may not
*** be the reason for the server aborting.
Backtrace:
0: X(xf86SigHandler+0x14a) [0x80bb2da]
1: [0xffffe420]
Fatal server error:
Caught signal 11. Server aborting.
XIO: Fatal IO Error 104 (Connection reset by peer) on X Server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
Man I wish I knew how to copy shit into links ( yah I know , use the middle click button...it doesn't work).
Anyways, I'm using the nvidia drivers (nvidia-kernel / nvidia-glx). I've tried emerging them multiple times, with different kernels. I talked with a guy from a different thread with what seemed to be the same problem, and he said adding
BusId "PCI:2:0:0"
and
Option "NvAGP "0"
helped him get it working. But I did that and I'm still xless. |
Are you using a >=2.6.14-rc2 kernel? I have exactly the same problem with that version; 2.6.14-rc1 and earlier work fine. |
Well...as I've been using reiser4 for quite some time, I've been using the latest nitro-sources. so... 2.6.13.2-nitro1 (https://forums.gentoo.org/viewtopic-t-383064.html). I'll look into patching the vanilla-sources since you brought it up.
EDIT: Screw that...I'll just try out mm-sources hehehe. |
|
| Back to top |
|
|
btlee
Apprentice
Joined: 03 Sep 2004
Posts: 168
Location: San Francisco
|
| Posted: Mon Oct 03, 2005 9:50 am Post subject: |
|
|
| btlee wrote: | | Voltago wrote: | | btlee wrote: |
I have a question.
Have you ever tried a framebuffer and VBERestore option?
In the previous monolithic version of xorg, I had no problem.
But, it is no more possible to return the console with framebuffer.
I'm using dell 700m, which has 1280x800 wide screen, but it is possible to run only on 1024x768 frame buffer screen. |
VBERestore in conjunction with fbdev? No, haven't tried it, sorry. But have you tried to use the i810 driver and the 855resolution tool (in portage) to get full resolution? |
I used i810 driver and 855 resolution, so i got full resolution except frame buffer.
In console, the screen resolution was 1024x768 with vesafb.
Thanks for your quick answer.  |
Recently, I tried to install xorg-6.99.15-r2, and then I noticed that i810 driver of new xorg is broken
in the function of VBERestore option. So, the problem is not from the modular-x, but new i810 driver.
_________________
AMD64 3200+, 2G/160G+250G
DELL 700m, 1.8GHz, 2G/80G
iBook G3-500Mhz, 640M/100G |
|
| Back to top |
|
|
Archangel1
Veteran
Joined: 21 Apr 2004
Posts: 1212
Location: Work
|
| Posted: Wed Oct 05, 2005 4:58 am Post subject: |
|
|
Has anyone had any luck getting modular X going with multiple monitors?
My desktop is working fine with it's primary card (using the nvidia driver) - even Twinview seems to work okay. But as soon as I try to do anything with the second card (a TNT2 so I'm using the nv driver) X locks at a blank screen. Once I reboot the machine the log is inconclusive - it seems to think it started up fine.
There are a couple of messages about invalid memory allocations, but I'm getting that from my primary card too which doesn't seem to have any trouble.
_________________
What are you, stupid? |
|
| Back to top |
|
|
Archangel1
Veteran
Joined: 21 Apr 2004
Posts: 1212
Location: Work
|
| Posted: Wed Oct 05, 2005 8:38 am Post subject: |
|
|
It also transpires that buttons 2 and 3 are swapped on my mouse when using the evdev driver. Anyone know a fix for it? Xmodmap seems to be totally ineffective, not that it likes evdev much anyway.
_________________
What are you, stupid? |
|
| Back to top |
|
|
iro
n00b
Joined: 23 Dec 2004
Posts: 59
Location: Modena, Italy
|
| Posted: Fri Oct 07, 2005 12:08 pm Post subject: |
|
|
| Archangel1 wrote: | | It also transpires that buttons 2 and 3 are swapped on my mouse when using the evdev driver. Anyone know a fix for it? Xmodmap seems to be totally ineffective, not that it likes evdev much anyway. |
same problem here... |
|
| Back to top |
|
|
Voltago
Advocate
Joined: 02 Sep 2003
Posts: 2593
Location: userland
|
| Posted: Sun Oct 09, 2005 9:14 am Post subject: |
|
|
| Archangel1 wrote: | | It also transpires that buttons 2 and 3 are swapped on my mouse when using the evdev driver. Anyone know a fix for it? Xmodmap seems to be totally ineffective, not that it likes evdev much anyway. |
What does your input device section for your mouse look like? Here's mine:
| Code: | Section "InputDevice"
Identifier "usbmouse"
Driver "evdev"
Option "Protocol" "event"
Option "Device" "/dev/input/event2"
Option "SendCoreEvents" "true"
EndSection |
|
|
| Back to top |
|
|
Archangel1
Veteran
Joined: 21 Apr 2004
Posts: 1212
Location: Work
|
| Posted: Sun Oct 09, 2005 9:23 am Post subject: |
|
|
| Code: | Section "InputDevice"
Identifier "MX1000"
Driver "evdev"
Option "Device" "/dev/input/mx1000"
Option "Buttons" "12"
EndSection |
I shall try using yours instead
_________________
What are you, stupid? |
|
| Back to top |
|
|
Archangel1
Veteran
Joined: 21 Apr 2004
Posts: 1212
Location: Work
|
| Posted: Sun Oct 09, 2005 9:31 am Post subject: |
|
|
Unfortunately no change - thanks for your help
_________________
What are you, stupid? |
|
| Back to top |
|
|
zbyte64
n00b
Joined: 09 Apr 2003
Posts: 42
|
| Posted: Tue Oct 11, 2005 7:18 am Post subject: |
|
|
Xorg-server isn't working for me, and this is the infamous last line:
| Code: | | waiting for X server to shutdown FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing. |
i reemerged lots of fonts, used mkfontdir on the directory, plus some other things. As one person did, I emerged libXft - no such luck. I then also tried the Xfontserver and still no go.
Any ideas?
_________________
Im not creative enough to come up with a witty signature. |
|
| Back to top |
|
|
Bonkie
Guru
Joined: 28 Oct 2002
Posts: 501
Location: Antwerpen, Belgium
|
| Posted: Tue Oct 11, 2005 8:32 am Post subject: |
|
|
I get that line as well, but here xorg-server is working, so maybe the problem lies somewhere else ??
_________________
"I would say we have a 50% chance of survival, but I consider myself an optimist so I'll give us 50,5% ..."
~ Arthur C. Clarke [Physics PHD,SF Writer], when asked about the chances of the human race's survival |
|
| Back to top |
|
|
Archangel1
Veteran
Joined: 21 Apr 2004
Posts: 1212
Location: Work
|
| Posted: Tue Oct 11, 2005 9:45 am Post subject: |
|
|
I would hazard a guess that the error is happening somewhere before the last line...
Look through /var/log/Xorg.0.log for lines starting in (EE) or (WW) - the fatal error is sometimes quite a long way before it bails out.
_________________
What are you, stupid? |
|
| Back to top |
|
|
StringCheesian
l33t
Joined: 21 Oct 2003
Posts: 887
|
| Posted: Tue Oct 11, 2005 12:00 pm Post subject: |
|
|
Any news on not being about to compile kde with xorg-server?
I've been watching the "[PATCH] Make kdebase stop looking for imake" Gentoo bugzilla entry, but there's been no activity for almost 2 months. |
|
| Back to top |
|
|
Bonkie
Guru
Joined: 28 Oct 2002
Posts: 501
Location: Antwerpen, Belgium
|
| Posted: Tue Oct 11, 2005 12:10 pm Post subject: |
|
|
Only kdm is affected, everything else from KDE works here. I run KDE from svn, and I can compile kdm without imake (modify configure), but it wont start up so ... 
_________________
"I would say we have a 50% chance of survival, but I consider myself an optimist so I'll give us 50,5% ..."
~ Arthur C. Clarke [Physics PHD,SF Writer], when asked about the chances of the human race's survival |
|
| Back to top |
|
|
Xake
Guru
Joined: 11 Feb 2004
Posts: 588
Location: Göteborg, the rainy part of scandinavia
|
| Posted: Tue Oct 11, 2005 12:17 pm Post subject: |
|
|
| StringCheesian wrote: | | [snip] but there's been no activity for almost 2 months. |
I believe they wait for upstream to modularize imake.
And two days ago the build-things and symlinks where made in xorg-cvs, so I guess we will see result with the next RC (when that will be)...
...or if someone makes a CVS-snap before that (don't look at me, i know very little of such things). |
|
| Back to top |
|
|
StringCheesian
l33t
Joined: 21 Oct 2003
Posts: 887
|
| Posted: Tue Oct 11, 2005 12:54 pm Post subject: |
|
|
Thank, Xake.
| Bonkie wrote: | | StringCheesian wrote: | | Any news on not being about to compile kde with xorg-server?[...] |
Only kdm is affected, everything else from KDE works here.[...] |
Oh. I don't even use kdm. For some reason the stuff I read when I first looked into it made it sound much worse than that. |
|
| Back to top |
|
|
Voltago
Advocate
Joined: 02 Sep 2003
Posts: 2593
Location: userland
|
| Posted: Tue Oct 11, 2005 2:41 pm Post subject: |
|
|
The patch there doesn't work? In that case try this patch instead, it does basically the same and worked fine for me. |
|
| Back to top |
|
|
Bonkie
Guru
Joined: 28 Oct 2002
Posts: 501
Location: Antwerpen, Belgium
|
| Posted: Tue Oct 11, 2005 8:53 pm Post subject: |
|
|
Ah lol, the patches dont apply vs svn checkout of kdm, but I used one to create my own patch, but I forgot to change these 2 lines
| Code: | AC_DEFINE_UNQUOTED(XBINDIR, "$XBINDIR", [X binaries directory])
AC_DEFINE_UNQUOTED(XLIBDIR, "$XLIBDIR", [X libraries directory]) |
into
| Code: | AC_DEFINE_UNQUOTED(XBINDIR, "/usr/bin", [X binaries directory])
AC_DEFINE_UNQUOTED(XLIBDIR, "/usr/lib", [X libraries directory]) |
but even then it doesn't work, kdm doesn't pop up, but i can live without kdm ...
[edit] maybe its the same reason why xdm isnt working, who knows
_________________
"I would say we have a 50% chance of survival, but I consider myself an optimist so I'll give us 50,5% ..."
~ Arthur C. Clarke [Physics PHD,SF Writer], when asked about the chances of the human race's survival |
|
| Back to top |
|
|
zbyte64
n00b
Joined: 09 Apr 2003
Posts: 42
|
| Posted: Tue Oct 11, 2005 11:06 pm Post subject: |
|
|
ok, i went through my Xorg logs and i get two warnings that go like ***INVALID MEM ALLOCATION*** but that is it. Just a little fyi, the mouse cursor does show up for a split second, then the screen goes back to the terminal.
Now it seems i got it to work. I emerged the following:
libXaw libXpm twm xclock libXTrap libXrandr libXcomposite libXcursor libXv libXScrnSaver
btw, if anyone is has radeon mobility 9000, the xorg-server ati drivers work just fine for me
edit: fvwm2, fluxbox, xsession are working, but not gnome :/
_________________
Im not creative enough to come up with a witty signature. |
|
| Back to top |
|
|
StringCheesian
l33t
Joined: 21 Oct 2003
Posts: 887
|
| Posted: Tue Oct 11, 2005 11:58 pm Post subject: |
|
|
| Voltago wrote: |
The patch there doesn't work? In that case try this patch instead, it does basically the same and worked fine for me. |
Oh, I just assumed that there must be something wrong with the patch, because that bug entry hasn't been marked resolved. Now that I know it affects only kdm I don't care about it anymore anyway, because I use startx instead. Thanks anyway. |
|
| Back to top |
|
|
Xake
Guru
Joined: 11 Feb 2004
Posts: 588
Location: Göteborg, the rainy part of scandinavia
|
| Posted: Wed Oct 12, 2005 5:20 am Post subject: |
|
|
| zbyte64 wrote: | | edit: fvwm2, fluxbox, xsession are working, but not gnome :/ |
Strange, gnome worked for me. |
|
| Back to top |
|
|
zbyte64
n00b
Joined: 09 Apr 2003
Posts: 42
|
| Posted: Wed Oct 12, 2005 6:18 am Post subject: |
|
|
zake: it seems i needed to emerge libXinerama as well. Works now... with some messyness errors, should have it banged out before i goto bed....
_________________
Im not creative enough to come up with a witty signature. |
|
| Back to top |
|
|
Xake
Guru
Joined: 11 Feb 2004
Posts: 588
Location: Göteborg, the rainy part of scandinavia
|
| Posted: Wed Oct 12, 2005 6:33 am Post subject: |
|
|
| zbyte64 wrote: | | zake: it seems i needed to emerge libXinerama as well. Works now... with some messyness errors, should have it banged out before i goto bed.... |
Tried revdep-rebuild?
Most of my problems came from missing libX*, and a simple | Code: | | revdep-rebuild -p | grep libX |
gave me a nice little list over what libs programs expected to find. |
|
| Back to top |
|
|
|
Desktop Environments
