View previous topic :: View next topic |
Author |
Message |
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Sun Oct 09, 2005 9:34 am Post subject: Is my harddrive about to die? |
|
|
Hi, I find this in dmesg, does it mean my harddrive is about to die? Quote: | 030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723519
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723527
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723535
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723543
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c016d14f>] do_lookup+0x4a/0xa8
[<c01775c9>] dput+0x8a/0x1de
[<c03365cc>] cdrom_check_status+0x83/0x9f
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0337897>] ide_cdrom_check_media_change_real+0x2a/0x49
[<c0358395>] media_changed+0x5f/0x97
[<c0358407>] cdrom_media_changed+0x3a/0x43
[<c0167483>] check_disk_change+0x32/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723551
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723559
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336968>] cdrom_read_tocentry+0xbb/0xd7
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a9a>] cdrom_read_toc+0x116/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723567
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295723575
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336878>] cdrom_read_capacity+0x57/0x8c
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a21>] cdrom_read_toc+0x9d/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295724071
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295724079
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295724087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 295724095
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0337201>] ide_cdrom_packet+0xb6/0xfd
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0356c54>] cdrom_get_media_event+0x55/0x94
[<c033771c>] ide_cdrom_drive_status+0x49/0xe2
[<c035a5ee>] cdrom_ioctl+0xbe7/0xe1c
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03388fd>] idecd_ioctl+0x85/0x99
[<c02dff9b>] blkdev_driver_ioctl+0x5f/0xa0
[<c02e01a0>] blkdev_ioctl+0x1c4/0x1cb
[<c0167c45>] block_ioctl+0x2b/0x2f
[<c017263e>] do_ioctl+0x9a/0xa9
[<c01727f6>] vfs_ioctl+0x65/0x1e1
[<c01729f7>] sys_ioctl+0x85/0x92
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39495
Buffer I/O error on device sda1, logical block 4929
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336968>] cdrom_read_tocentry+0xbb/0xd7
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a9a>] cdrom_read_toc+0x116/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39503
Buffer I/O error on device sda1, logical block 4930
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39511
Buffer I/O error on device sda1, logical block 4931
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39519
Buffer I/O error on device sda1, logical block 4932
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336968>] cdrom_read_tocentry+0xbb/0xd7
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a9a>] cdrom_read_toc+0x116/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39527
Buffer I/O error on device sda1, logical block 4933
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39535
Buffer I/O error on device sda1, logical block 4934
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39543
Buffer I/O error on device sda1, logical block 4935
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39551
Buffer I/O error on device sda1, logical block 4936
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39559
Buffer I/O error on device sda1, logical block 4937
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336968>] cdrom_read_tocentry+0xbb/0xd7
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a9a>] cdrom_read_toc+0x116/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 39567
Buffer I/O error on device sda1, logical block 4938
lost page write due to I/O error on sda1
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336968>] cdrom_read_tocentry+0xbb/0xd7
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a9a>] cdrom_read_toc+0x116/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183413999
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414007
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414015
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414023
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414031
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414039
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336878>] cdrom_read_capacity+0x57/0x8c
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a21>] cdrom_read_toc+0x9d/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414047
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414055
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414063
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414071
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0337201>] ide_cdrom_packet+0xb6/0xfd
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0356c54>] cdrom_get_media_event+0x55/0x94
[<c033771c>] ide_cdrom_drive_status+0x49/0xe2
[<c035a5ee>] cdrom_ioctl+0xbe7/0xe1c
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03388fd>] idecd_ioctl+0x85/0x99
[<c02dff9b>] blkdev_driver_ioctl+0x5f/0xa0
[<c02e01a0>] blkdev_ioctl+0x1c4/0x1cb
[<c0167c45>] block_ioctl+0x2b/0x2f
[<c017263e>] do_ioctl+0x9a/0xa9
[<c01727f6>] vfs_ioctl+0x65/0x1e1
[<c01729f7>] sys_ioctl+0x85/0x92
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414079
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414095
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414103
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c03365cc>] cdrom_check_status+0x83/0x9f
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c03369d6>] cdrom_read_toc+0x52/0x49f
[<c014afe2>] invalidate_mapping_pages+0x4f/0xe6
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414111
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c016d14f>] do_lookup+0x4a/0xa8
[<c01775c9>] dput+0x8a/0x1de
[<c03365cc>] cdrom_check_status+0x83/0x9f
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0337897>] ide_cdrom_check_media_change_real+0x2a/0x49
[<c0358395>] media_changed+0x5f/0x97
[<c0358407>] cdrom_media_changed+0x3a/0x43
[<c0167483>] check_disk_change+0x32/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414119
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
scheduling while atomic: hald/0x20000000/30052
[<c0453cab>] schedule+0xa13/0xd1b
[<c0121f67>] __do_softirq+0x6b/0xd8
[<c01056aa>] do_IRQ+0x1e/0x24
[<c0103b16>] common_interrupt+0x1a/0x20
[<c04545e7>] cond_resched+0x27/0x40
[<c0454f44>] __reacquire_kernel_lock+0x26/0x4d
[<c0453c26>] schedule+0x98e/0xd1b
[<c0334b67>] cdrom_transfer_packet_command+0xa1/0x120
[<c04545e7>] cond_resched+0x27/0x40
[<c0453fc4>] wait_for_completion+0x11/0xce
[<c0335829>] cdrom_do_pc_continuation+0x0/0x3c
[<c03278d1>] start_request+0x220/0x2c5
[<c0327ba7>] ide_do_request+0x209/0x380
[<c03283a9>] ide_do_drive_cmd+0x118/0x15b
[<c03358f8>] cdrom_queue_packet_command+0x47/0xbf
[<c03283c5>] ide_do_drive_cmd+0x134/0x15b
[<c0336878>] cdrom_read_capacity+0x57/0x8c
[<c02ddd29>] blk_end_sync_rq+0x0/0x2c
[<c0336a21>] cdrom_read_toc+0x9d/0x49f
[<c0338943>] idecd_revalidate_disk+0x1d/0x23
[<c014b098>] invalidate_inode_pages+0x1f/0x23
[<c0179882>] __invalidate_device+0x4d/0x5f
[<c01674bc>] check_disk_change+0x6b/0x7b
[<c035780b>] cdrom_open+0x6f/0x109
[<c03387d6>] idecd_open+0x62/0xb1
[<c016780e>] do_open+0x2c9/0x3a4
[<c01679db>] blkdev_open+0x34/0x6e
[<c015e0d8>] dentry_open+0x1ab/0x21f
[<c015df28>] filp_open+0x5c/0x61
[<c015e322>] sys_open+0x5b/0xf6
[<c01030ff>] sysenter_past_esp+0x54/0x75
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x61
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 183414127
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
ATA: abnormal status 0xD0 on port 0xF880E087
| thanks |
|
Back to top |
|
|
itsmegawtf Apprentice
Joined: 01 Oct 2005 Posts: 150
|
Posted: Sun Oct 09, 2005 4:01 pm Post subject: |
|
|
maybe, for more comments - run fsck.{yourFS}. |
|
Back to top |
|
|
feld Guru
Joined: 29 Aug 2004 Posts: 593 Location: USA
|
Posted: Sun Oct 09, 2005 4:01 pm Post subject: |
|
|
have u tried a different kernel to make sure u dont have something buggy going on.
i'm no expert but that doesnt look the greatest.
-Feld _________________ < bmg505> I think the first line in reiserfsck is
if (random(65535)< 65500) { hose(partition); for (i=0;i<100000000;i++) print_crap(); } |
|
Back to top |
|
|
i92guboj Bodhisattva
Joined: 30 Nov 2004 Posts: 10315 Location: Córdoba (Spain)
|
Posted: Sun Oct 09, 2005 4:08 pm Post subject: |
|
|
itsmegawtf wrote: | maybe, for more comments - run fsck.{yourFS}. |
Option 1: buggy kernel drivers.
Option 2: your drive is saying good-bye.
In none of these situations would I run fsck. That can only mess up your filesystem. Nothing good. I would try first another kernel, if possible, a livecd precompiled one or something like that. It would be better because that way you make sure that there is no user introduced errors in the kernel.
Then, I would emerge smartctl and do a smartctl -H /dev/hda (or whatever device it is). That will tell you the health state of your hd. As last ressort, do a backup if you can (if normal programs fail there is always the command "dd") and run fsck when the drive is unmounted, from a livecd for example. |
|
Back to top |
|
|
flybynite l33t
Joined: 06 Dec 2002 Posts: 620
|
Posted: Mon Oct 10, 2005 3:39 am Post subject: |
|
|
You need to run smartctl to check the status of the disk. This will check the builtin failure detection of the disk.
* sys-apps/smartmontools
Available versions: 5.33
Installed: 5.33
Homepage: http://smartmontools.sourceforge.net/
Description: control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology
emerge -va smartmontools
Then
smartctl -a /dev/hda
Which will show something like this for a good disk:
Code: |
gate1 ~ # smartctl -a /dev/hdc
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3200822A
Serial Number: 3LJ06ZE9
Firmware Version: 3.01
User Capacity: 200,049,647,616 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sun Oct 9 22:28:26 2005 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 051 047 006 Pre-fail Always - 72127917
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 90
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 568101779
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9521
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 112
194 Temperature_Celsius 0x0022 044 052 000 Old_age Always - 44
195 Hardware_ECC_Recovered 0x001a 051 046 000 Old_age Always - 72127917
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6427 -
# 2 Short offline Completed without error 00% 6185 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
Back to top |
|
|
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Mon Oct 10, 2005 6:08 am Post subject: |
|
|
Quote: | odysseus john # smartctl -a /dev/sda
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: ATA WDC WD1600JD-22F Version: 02.0
SATA disks accessed via libata are not currently supported by
smartmontools. When libata is given an ATA pass-thru ioctl() then an
additional '-d libata' device type will be added to smartmontools.
|
I tried knoppix and got no errors, but I am not quite sure what causes the errors yet and did not spend long playing around with files on the drive.
I think I will just invest in a new harddrive. |
|
Back to top |
|
|
Sleipnir Guru
Joined: 20 Sep 2005 Posts: 372 Location: Germany
|
Posted: Mon Oct 10, 2005 6:14 am Post subject: |
|
|
Try to find a drive fitness test (DFT) on the homepage of
your HDD manufacturer. Thats the only reliable way to
test if the drive is ok. _________________ A)bort, R)etry, I)nfluence with large hammer. |
|
Back to top |
|
|
flybynite l33t
Joined: 06 Dec 2002 Posts: 620
|
Posted: Mon Oct 10, 2005 9:39 am Post subject: |
|
|
johntramp wrote: |
I think I will just invest in a new harddrive. |
Probably the best idea. However if you want to make sure here is a link to the Drive Test from Western Digital. I just wouldn't run the disk too much till you get your data off it!
You can download a bootable cd or floppy from this page to run tests.
http://support.wdc.com/download/index.asp?cxml=n&pid=999&swid=30
I did notice that libata has smart support in the current dev version. Just not merged into mainline yet. It shouldn't be too long now.... |
|
Back to top |
|
|
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Thu Oct 13, 2005 1:35 am Post subject: |
|
|
hmm... the same day as I bought a new harddrive to backup data on the old one, it refueses to mount. I have tried to dd the filesystem to another harddrive but that crased out with I/O errors after ~50mb.
Is there anything I can do to get the data off it? Someone told me to put the drive in a freezer overnight :S sounds like an old wive's tale to me tho.
I haven't run that test yet flybynite tho, I want to wait to see if I can get anything back first. |
|
Back to top |
|
|
i92guboj Bodhisattva
Joined: 30 Nov 2004 Posts: 10315 Location: Córdoba (Spain)
|
Posted: Thu Oct 13, 2005 1:54 am Post subject: |
|
|
A freezer? Well, at least it's something original. For the heads is as bad the cold as the heat. That, without counting that im almost sure that you havent an hermetic enough thingy to put the hd into so the humidity does not destroy the little life that may remain on it.
My advise: concentrate in small block of info, make a mental map of what you want to recover. When hds are dying in such manner, they always tend to crash with io errors in a few minutes, so, the best is to rescue little blocks, one each time. When it crashes, unplugg it, and try tommorrow again another little piece of data, preferably in a not so hot hour of the day (at night? ). That is the only chance that you have to recover the info unless you are willing to pay a proffessional data recovery service. |
|
Back to top |
|
|
riscycdj n00b
Joined: 09 Oct 2005 Posts: 61
|
Posted: Thu Oct 13, 2005 1:59 am Post subject: |
|
|
If the problem is the controller chips then yes. Freezer in a bag overnight and then quickly booting and extracting the data works. Better if you get freezer spray or invert a can of "air in a can" to keep the chips cool.
This works about 10% of the time and only if it is only just failing. A better method is getting another EXACTLY the same drive and swapping the controller boards over. This works well but only if you have two identical drives.
If the problem is with the drive or the head you are stuffed and will need to pay big bucks to get the data back.
Good luck! |
|
Back to top |
|
|
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Thu Oct 13, 2005 2:10 am Post subject: |
|
|
how do I know if it is a problem with the controller or the disk? |
|
Back to top |
|
|
riscycdj n00b
Joined: 09 Oct 2005 Posts: 61
|
Posted: Thu Oct 13, 2005 12:39 pm Post subject: |
|
|
Good question. Not really easy to tell. But if the disk sounds like a jet taking off then there is probably something mechanically wrong. If it seems to make no clicking noise or repeated clicks then the voice coil might be stuffed.
I would still try the freezer trick and then go from there. It can't get any worse....can it |
|
Back to top |
|
|
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Thu Oct 13, 2005 7:42 pm Post subject: |
|
|
I do hear the drive power on and off sometimes :S
anyway, this is what Iget from dd running off a live cd
root@knoppix:/mnt/hdc1 # dd if=/dev/sda1 of=/mnt/hdc1/ddsda.img conv=sync,noerror
dd: reading `/dev/sda1': Input/output error
96960+0 records in
96960+0 records out
49643520 bytes transferred in 70.069536 seconds (708489 bytes/sec)
dd: reading `/dev/sda1': Input/output error
96960+1 records in
96961+0 records out
49644032 bytes transferred in 70.069950 seconds (708492 bytes/sec)
dd: reading `/dev/sda1': Input/output error
96960+2 records in
96962+0 records out
49644544 bytes transferred in 70.088087 seconds (708316 bytes/sec)
dd: reading `/dev/sda1': Input/output error
96960+3 records in
96963+0 records out
49645056 bytes transferred in 70.088502 seconds (708320 bytes/sec)
dd: reading `/dev/sda1': Input/output error
96960+4 records in
96964+0 records out
49645568 bytes transferred in 70.088865 seconds (708323 bytes/sec)
dd: reading `/dev/sda1': Input/output error
96960+5 records in
96965+0 records out
49646080 bytes transferred in 70.109145 seconds (708126 bytes/sec)
dd: reading `/dev/sda1': Input/output error
96960+6 records in
96966+0 records out
49646592 bytes transferred in 70.109548 seconds (708129 bytes/sec)
dd: reading `/dev/sda1': Input/output error
96960+7 records in
96967+0 records out
49647104 bytes transferred in 70.109908 seconds (708132 bytes/sec)
The file I get from this is
root@ubuntu:/mnt/hdc1 # ls -l
total 48944
-rw-r--r-- 1 root root 50036736 2005-10-13 08:37 ddsda.img
It does not get any bigger than 48mb. Is there a way I can start the dd after this point on the harddrive maybe?
Thanks |
|
Back to top |
|
|
widan Veteran
Joined: 07 Jun 2005 Posts: 1512 Location: Paris, France
|
Posted: Thu Oct 13, 2005 9:19 pm Post subject: |
|
|
johntramp wrote: | It does not get any bigger than 48mb. Is there a way I can start the dd after this point on the harddrive maybe? |
There is a program called dd_rescue that ignores I/O errors. You can try that.
If you want to try to start after the bad area, look at the "skip" and "seek" options of dd (skip a number of blocks in the input and output files, respectively). Use both set to the same value, so the recovered blocks are in the correct position in the output file.
The procedure to do a complete image that way is something like this: start copying from the beginning. When you encounter an error, take the number of "records in" and add 1 (to skip over the bad block). If you have 10000 records in, add "skip=10001 seek=10001" to your dd command. Then you continue doing it the same way for subsequent errors (but add the number of "records in" you got to the current skip value, and add one more). This can take a long time if there are a lot of errors. |
|
Back to top |
|
|
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Thu Oct 13, 2005 10:34 pm Post subject: |
|
|
widan thanks for that
I will give ddrescue a go when I get home, otherwise I suppose I will have to try the "skip" and "seek" options |
|
Back to top |
|
|
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Thu Oct 13, 2005 11:16 pm Post subject: |
|
|
what is the difference between these two? |
|
Back to top |
|
|
flybynite l33t
Joined: 06 Dec 2002 Posts: 620
|
Posted: Sat Oct 15, 2005 5:44 pm Post subject: |
|
|
Sometimes you have to work with the tools at hand. Here is the scoop for using dd in these situations taken from the sleuthkit informer:
Quote: |
Error Correction
If 'dd' comes across an error while reading a block from the input file, an error will be generated and the copying process will stop. You can cause 'dd' to keep on going when it encounters an error if you provide the 'conv=noerror' flag. Unfortunately, with just that flag, 'dd' will skip writing that block and the remaining data will be in the wrong location.
A more desirable behavior is to have 'dd' write 0's where the bad block was found, which can be done by adding the 'sync' flag to the 'conv=' option. The 'sync' flag will pad the blocks so that each block written is a full block size. The disadvantage of the 'sync' flag is that if you chose a block size that is not a multiple of the original media size, then the final block will be padded with 0's. Therefore, this option should not be used unless there are known errors and you should chose a smaller block size. An example of using these flags are:
# dd if=/dev/hdd of=/mnt/disk.dd bs=1k conv=noerror,sync
|
Note this author refers to creating an exact duplicate for forensic purposes. For just getting your data back, you don't need to worry about any extra padding. Since some filesystems use known offsets for superblocks etc, always use both the noerror and sync options in case of any errors. The ide bus has to be reset after errors so the copy will take a real long time |
|
Back to top |
|
|
johntramp Guru
Joined: 03 Feb 2004 Posts: 457 Location: New Zealand
|
Posted: Sun Oct 16, 2005 3:29 am Post subject: |
|
|
I don't think I will be able to get anything back from this harddrive Using both dd-resuce and dd it will create a file just shy of 50mb and then crash. I have tried telling them to start at blocks well past this point but that still does not work at all.
From what I have read the file created by dd should keep growing as zeros are added on where the errors lie, but this does not happen. The harddrive also makes a high pitched sound when it is running, which I am sure is not good. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|