| View previous topic :: View next topic |
| Author |
Message |
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
 Posted: Sun Oct 16, 2005 10:40 pm Post subject: [Openssh] Non genera le chiavi [risolto] |
 |
|
Appena installata una nuova gentoo box e aggiunto sshd in fase di boot... cio che accade e' che durante la fase di boot il pc si arresta al punto di generazione delle chiavi e non va piu' avanti.
Qui sotto riporto l'rc di sshd ed il relativo punto di arresto:
| Code: | [matteo@stekkino TRAJECTORY]$ cat /etc/init.d/sshd
#!/sbin/runscript
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/files/sshd.rc6,v 1.16 2005/08/21 19:09:30 v
apier Exp $
depend() {
use logger dns
need net
}
checkconfig() {
if [ ! -d /var/empty ] ; then
mkdir -p /var/empty || return 1
fi
if [ ! -e /etc/ssh/sshd_config ] ; then
eerror "You need an /etc/ssh/sshd_config file to run sshd"
eerror "There is a sample file in /usr/share/doc/openssh"
return 1
fi
gen_keys || return 1
/usr/sbin/sshd -t || return 1
}
gen_keys() {
if [ ! -e /etc/ssh/ssh_host_key ] ; then
einfo "Generating Hostkey..." <---------------------------------------------------------------------------
/usr/bin/ssh-keygen -t rsa1 -b 1024 -f /etc/ssh/ssh_host_key -N '' || return 1
fi
if [ ! -e /etc/ssh/ssh_host_dsa_key ] ; then
einfo "Generating DSA-Hostkey..."
/usr/bin/ssh-keygen -d -f /etc/ssh/ssh_host_dsa_key -N '' || return 1
fi
if [ ! -e /etc/ssh/ssh_host_rsa_key ] ; then
einfo "Generating RSA-Hostkey..."
/usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' || return 1
fi
return 0
}
start() {
checkconfig || return 1
ebegin "Starting sshd"
/usr/sbin/sshd
eend $?
}
stop() {
ebegin "Stopping sshd"
start-stop-daemon --stop --quiet --pidfile /var/run/sshd.pid
eend $?
}
|
... questa proprio non me la spiego.
Last edited by quantumwire on Wed Nov 23, 2005 6:56 pm; edited 1 time in total |
|
| Back to top |
|
 |
Kernel78
Moderator
Joined: 24 Jun 2005
Posts: 3654
|
| Posted: Mon Oct 17, 2005 6:07 am Post subject: |
|
|
Hai provato a generare le chiavi a manina ?
_________________
Le tre grandi virtù di un programmatore: pigrizia, impazienza e arroganza. (Larry Wall).
Prima di postare un file togli i commenti con | Code: | | grep -vE '(^[[:space:]]*($|(#|!|;|//)))' |
|
|
| Back to top |
|
|
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Mon Oct 17, 2005 8:10 am Post subject: |
|
|
Sei sicuro di non aver compilato con CFLAGS troppo "spinte" ?
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 8:36 am Post subject: |
|
|
| Kernel78 wrote: | | Hai provato a generare le chiavi a manina ? |
Beh... piu' a manina di quell'rc non saprei??? Non fa di certo cose turche... comunque ho provato e non funziona. |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 8:39 am Post subject: |
|
|
| gutter wrote: | | Sei sicuro di non aver compilato con CFLAGS troppo "spinte" ? |
CFLAG="-O2 -mcpu=amd-k3 -fomit-frame-pointer -funroll-al-loops -pipe"
... spinte???
Last edited by quantumwire on Mon Oct 17, 2005 9:12 am; edited 1 time in total |
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Mon Oct 17, 2005 9:00 am Post subject: |
|
|
dando manualmente il comando cosa esce ?
fai un strace e vedi dove si blocca. |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 9:29 am Post subject: |
|
|
| makoomba wrote: | dando manualmente il comando cosa esce ?
fai un strace e vedi dove si blocca. |
Allora... non posso fare cat & paste perche' non posso connettermi sul pc in questione via ssh il quale non ha X:
| Code: | time([1129533778])
getpid() =12342
getpid() =12342
time([1129533778])
getpid() =12342
getpid() =12342
time([1129533778])
getpid() =12342
getpid() =12342
time([1129533778])
getpid() =12342
getpid() =12342
time([1129533778])
getpid() =12342
getpid() =12342
|
...... ripetuto all'infinito con la sola differenza che il tempo in time([xxxxxx]) aumenta. |
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Mon Oct 17, 2005 9:42 am Post subject: |
|
|
posta il blocco prima del loop, magari installa temporaneamente un server telnet per fare le prove.
suppongo tu abbia già provato a riemergere openssl/openssh |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 9:57 am Post subject: |
|
|
| makoomba wrote: | posta il blocco prima del loop, magari installa temporaneamente un server telnet per fare le prove.
suppongo tu abbia già provato a riemergere openssl/openssh |
| Code: | execve("/usr/bin/ssh-keygen", ["/usr/bin/ssh-keygen", "-t", "rsa1", "-b", "1024", "-f", "./pippo", "-N", ""], [/* 29 vars */]) = 0
uname({sys="Linux", node="sigaro", ...}) = 0
brk(0) = 0x805f000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=20648, ...}) = 0
mmap2(NULL, 20648, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f8e000
close(3) = 0
open("/lib/libresolv.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@&\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=60472, ...}) = 0
mmap2(NULL, 71956, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f7c000
mmap2(0xb7f8a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd) = 0xb7f8a000
mmap2(0xb7f8c000, 6420, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f8c000
close(3) = 0
open("/usr/lib/libcrypto.so.0.9.7", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@\305\2"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0555, st_size=1110424, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f7b000
mmap2(NULL, 1097496, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e6f000
mmap2(0xb7f66000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf7) = 0xb7f66000
mmap2(0xb7f78000, 12056, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f78000
close(3) = 0
open("/lib/libutil.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\f\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=10268, ...}) = 0
mmap2(NULL, 12424, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e6b000
mmap2(0xb7e6d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xb7e6d000
close(3) = 0
open("/lib/libz.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\22\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=90120, ...}) = 0
mmap2(NULL, 92084, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e54000
mmap2(0xb7e6a000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15) = 0xb7e6a000
close(3) = 0
open("/lib/libnsl.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@5\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=71080, ...}) = 0
mmap2(NULL, 79872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e40000
mprotect(0xb7e4f000, 18432, PROT_NONE) = 0
mmap2(0xb7e50000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf) = 0xb7e50000
mmap2(0xb7e52000, 6144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7e52000
close(3) = 0
open("/lib/libcrypt.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\10"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=18328, ...}) = 0
mmap2(NULL, 180540, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e13000
mmap2(0xb7e17000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0xb7e17000
mmap2(0xb7e19000, 155964, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7e19000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340U\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1142592, ...}) = 0
mmap2(NULL, 1088820, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7d09000
mprotect(0xb7e0c000, 27956, PROT_NONE) = 0
mmap2(0xb7e0d000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x103) = 0xb7e0d000
mmap2(0xb7e11000, 7476, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7e11000
close(3) = 0
open("/lib/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\v\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=10440, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7d08000
mmap2(NULL, 12392, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7d04000
mmap2(0xb7d06000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xb7d06000
close(3) = 0
mprotect(0xb7e0d000, 4096, PROT_READ) = 0
mprotect(0xb7fa6000, 4096, PROT_READ) = 0
munmap(0xb7f8e000, 20648) = 0
open("/dev/urandom", O_RDONLY) = 3
read(3, "\37\10\fd", 4) = 4
close(3) = 0
brk(0) = 0x805f000
brk(0x8080000) = 0x8080000
getpid() = 12385
getpid() = 12385
open("/dev/urandom", O_RDONLY|O_NONBLOCK|O_NOCTTY) = 3
select(4, [3], NULL, NULL, {0, 10000}) = 1 (in [3], left {0, 10000})
read(3, "M\251\34\350\352\16\10\232,+0\356\2\300\200\211!e\33\267"..., 32) = 32
close(3) = 0
getpid() = 12385
getpid() = 12385
getuid32() = 0
getpid() = 12385
time(NULL) = 1129535640
getpid() = 12385
getuid32() = 0
socket(PF_FILE, SOCK_STREAM, 0) = 3
fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
close(3) = 0
socket(PF_FILE, SOCK_STREAM, 0) = 3
fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
close(3) = 0
open("/etc/nsswitch.conf", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=503, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f93000
read(3, "# /etc/nsswitch.conf:\n# $Header:"..., 4096) = 503
read(3, "", 4096) = 0
close(3) = 0
munmap(0xb7f93000, 4096) = 0
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=20648, ...}) = 0
mmap2(NULL, 20648, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f8e000
close(3) = 0
open("/lib/libnss_compat.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\20"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=26832, ...}) = 0
mmap2(NULL, 29296, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7cfc000
mmap2(0xb7d02000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0xb7d02000
close(3) = 0
munmap(0xb7f8e000, 20648) = 0
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=20648, ...}) = 0
mmap2(NULL, 20648, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f8e000
close(3) = 0
open("/lib/libnss_nis.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\34"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=35408, ...}) = 0
mmap2(NULL, 37416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7cf2000
mmap2(0xb7cfa000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0xb7cfa000
close(3) = 0
open("/lib/libnss_files.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\33"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=35240, ...}) = 0
mmap2(NULL, 37516, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ce8000
mmap2(0xb7cf0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0xb7cf0000
close(3) = 0
munmap(0xb7f8e000, 20648) = 0
open("/etc/passwd", O_RDONLY) = 3
fcntl64(3, F_GETFD) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
_llseek(3, 0, [0], SEEK_CUR) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=1732, ...}) = 0
mmap2(NULL, 1732, PROT_READ, MAP_SHARED, 3, 0) = 0xb7f93000
_llseek(3, 1732, [1732], SEEK_SET) = 0
munmap(0xb7f93000, 1732) = 0
close(3) = 0
uname({sys="Linux", node="sigaro", ...}) = 0
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
getpid() = 12385
fstat64(1, {st_mode=S_IFREG|0644, st_size=11520, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f93000
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
time([1129535640]) = 1129535640
getpid() = 12385
getpid() = 12385
|
|
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Mon Oct 17, 2005 10:16 am Post subject: |
|
|
| ls -la /dev/tty* ? |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 10:25 am Post subject: |
|
|
| makoomba wrote: | | ls -la /dev/tty* ? |
| Code: | crw-rw-rw- 1 root tty 5, 0 Oct 13 23:25 /dev/tty
crw-rw---- 1 root tty 4, 0 Oct 13 23:25 /dev/tty0
crw------- 1 root tty 4, 1 Oct 17 10:22 /dev/tty1
crw-rw---- 1 root tty 4, 10 Oct 17 09:16 /dev/tty10
etc etc etc....
|
Last edited by quantumwire on Wed Oct 19, 2005 2:42 pm; edited 1 time in total |
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Mon Oct 17, 2005 10:34 am Post subject: |
|
|
| bah, non vedo niente di anomalo .... salvo che il tuo strace è molto diverso dal mio. |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 10:42 am Post subject: |
|
|
| makoomba wrote: | | bah, non vedo niente di anomalo .... salvo che il tuo strace è molto diverso dal mio. |
Di anomalo c'e' che non esce mai da quel "ciclo" e mi inchioda la cpu al 99.9%... cosi se lo rimetto tra i sevizi di boot non mi loggo nemmeno. |
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Mon Oct 17, 2005 10:50 am Post subject: |
|
|
| quantumwire wrote: | | Di anomalo c'e' che non esce mai da quel "ciclo" e mi inchioda la cpu al 99.9%... cosi se lo rimetto tra i sevizi di boot non mi loggo nemmeno. |
mi riferivo a /dev/tty: nel mio strace accede a quel device, nel tuo no |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 10:58 am Post subject: |
|
|
| makoomba wrote: | | quantumwire wrote: | | Di anomalo c'e' che non esce mai da quel "ciclo" e mi inchioda la cpu al 99.9%... cosi se lo rimetto tra i sevizi di boot non mi loggo nemmeno. |
mi riferivo a /dev/tty: nel mio strace accede a quel device, nel tuo no |
ma ci accede prima o dopo il punto critico???
Anche tu infatti dovresti avere quel getpid da qualche parte... o per lo meno riesci a riconoscere che cosa fa il tuo ssh-keygen dopo il punto nel quale il mio si impalla? |
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Mon Oct 17, 2005 11:10 am Post subject: |
|
|
avevo fatto solo un grep degli open, ti posto direttamente il mio.
ps
magari edita l'output di ls che tanto non serve, la pagina sta diventando chilometrica
| Code: |
execve("/usr/bin/ssh-keygen", ["/usr/bin/ssh-keygen", "-t", "rsa1", "-b", "1024", "-f", "rsa_test"], [/* 32 vars */]) = 0
uname({sys="Linux", node="mail", ...}) = 0
brk(0) = 0x1189767c
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=21928, ...}) = 0
mmap2(NULL, 21928, PROT_READ, MAP_PRIVATE, 3, 0) = 0x50b59000
close(3) = 0
open("/lib/libresolv.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200&\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=68556, ...}) = 0
mmap2(NULL, 79892, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x274b9000
mmap2(0x274c9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf) = 0x274c9000
mmap2(0x274cb000, 6164, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x274cb000
close(3) = 0
open("/usr/lib/libcrypto.so.0.9.7", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320\305"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0555, st_size=1308132, ...}) = 0
mmap2(NULL, 1295320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x274cd000
mprotect(0x275f3000, 91096, PROT_NONE) = 0
mmap2(0x275f4000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x126) = 0x275f4000
mmap2(0x27606000, 13272, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x27606000
close(3) = 0
open("/lib/libutil.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360\f\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=10196, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x50b58000
mmap2(NULL, 12300, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2760a000
mmap2(0x2760c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x2760c000
close(3) = 0
open("/lib/libz.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20c\266"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=82000, ...}) = 0
mmap2(NULL, 81992, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2760e000
mmap2(0x27621000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0x27621000
close(3) = 0
open("/lib/libnsl.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\3205\277"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=80800, ...}) = 0
mmap2(NULL, 87680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x27623000
mmap2(0x27635000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11) = 0x27635000
mmap2(0x27637000, 5760, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x27637000
close(3) = 0
open("/lib/libcrypt.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\351"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=23988, ...}) = 0
mmap2(NULL, 184604, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x27639000
mmap2(0x2763e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4) = 0x2763e000
mmap2(0x27640000, 155932, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x27640000
close(3) = 0
open("/lib/tls/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340A\237"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1244768, ...}) = 0
mmap2(NULL, 1178684, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x27667000
mprotect(0x27780000, 27708, PROT_NONE) = 0
mmap2(0x27781000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x119) = 0x27781000
mmap2(0x27785000, 7228, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x27785000
close(3) = 0
open("/lib/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\213"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=12040, ...}) = 0
mmap2(NULL, 12332, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x27787000
mmap2(0x27789000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x27789000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x50b57000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x50b56000
mprotect(0x27781000, 4096, PROT_READ) = 0
mprotect(0x275f4000, 16384, PROT_READ) = 0
mprotect(0x274b7000, 4096, PROT_READ) = 0
set_thread_area({entry_number:-1 -> 6, base_addr:0x50b566c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
munmap(0x50b59000, 21928) = 0
open("/dev/urandom", O_RDONLY) = 3
read(3, "\200-\31\301", 4) = 4
close(3) = 0
brk(0) = 0x1189767c
brk(0x118b867c) = 0x118b867c
brk(0x118b9000) = 0x118b9000
getpid() = 5433
open("/dev/urandom", O_RDONLY|O_NONBLOCK|O_NOCTTY) = 3
select(4, [3], NULL, NULL, {0, 10000}) = 1 (in [3], left {0, 10000})
read(3, "\261\4y\200r\35)\257b\253\334S\253\346\17\310\264\266\321"..., 32) = 32
close(3) = 0
getuid32() = 0
time(NULL) = 1129543441
getuid32() = 0
socket(PF_FILE, SOCK_STREAM, 0) = 3
fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
close(3) = 0
socket(PF_FILE, SOCK_STREAM, 0) = 3
fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
close(3) = 0
open("/etc/nsswitch.conf", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=503, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x50b5e000
read(3, "# /etc/nsswitch.conf:\n# $Header:"..., 4096) = 503
read(3, "", 4096) = 0
close(3) = 0
munmap(0x50b5e000, 4096) = 0
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=21928, ...}) = 0
mmap2(NULL, 21928, PROT_READ, MAP_PRIVATE, 3, 0) = 0x50b59000
close(3) = 0
open("/lib/libnss_compat.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@\21\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=30800, ...}) = 0
mmap2(NULL, 33232, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2778b000
mmap2(0x27792000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6) = 0x27792000
close(3) = 0
munmap(0x50b59000, 21928) = 0
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=21928, ...}) = 0
mmap2(NULL, 21928, PROT_READ, MAP_PRIVATE, 3, 0) = 0x50b59000
close(3) = 0
open("/lib/libnss_nis.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360\34"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=39436, ...}) = 0
mmap2(NULL, 41320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x27794000
mmap2(0x2779d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x2779d000
close(3) = 0
open("/lib/libnss_files.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360\33"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=39276, ...}) = 0
mmap2(NULL, 41448, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2779f000
mprotect(0x277a7000, 8680, PROT_NONE) = 0
mmap2(0x277a8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x277a8000
close(3) = 0
munmap(0x50b59000, 21928) = 0
open("/etc/passwd", O_RDONLY) = 3
fcntl64(3, F_GETFD) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
_llseek(3, 0, [0], SEEK_CUR) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=2483, ...}) = 0
mmap2(NULL, 2483, PROT_READ, MAP_SHARED, 3, 0) = 0x50b5e000
_llseek(3, 2483, [2483], SEEK_SET) = 0
munmap(0x50b5e000, 2483) = 0
close(3) = 0
uname({sys="Linux", node="mail", ...}) = 0
fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x50b5e000
write(1, "Generating public/private rsa1 k"..., 41) = 41
time([1129543441]) = 1129543441
... qui si ripete ..
time([1129543441]) = 1129543441
stat64("rsa_test", 0x59960900) = -1 ENOENT (No such file or directory)
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
open("/dev/tty", O_RDWR|O_LARGEFILE) = 3
rt_sigaction(SIGALRM, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGHUP, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGPIPE, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGQUIT, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTSTP, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTTIN, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTTOU, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(3, SNDCTL_TMR_CONTINUE or TCSETSF, {B38400 opost isig icanon -echo ...}) = 0
write(3, "Enter passphrase (empty for no p"..., 44) = 44
read(3, "\n", 1) = 1
write(3, "\n", 1) = 1
ioctl(3, SNDCTL_TMR_CONTINUE or TCSETSF, {B38400 opost isig icanon echo ...}) = 0
rt_sigaction(SIGALRM, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGHUP, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGTERM, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGTSTP, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGTTIN, {SIG_DFL}, NULL, 8) = 0
close(3) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
open("/dev/tty", O_RDWR|O_LARGEFILE) = 3
rt_sigaction(SIGALRM, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGHUP, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGPIPE, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGQUIT, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTSTP, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTTIN, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTTOU, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, {0x11885d90, [], SA_RESTORER, 0x2768fb28}, 8) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(3, SNDCTL_TMR_CONTINUE or TCSETSF, {B38400 opost isig icanon -echo ...}) = 0
write(3, "Enter same passphrase again: ", 29) = 29
read(3, "\n", 1) = 1
write(3, "\n", 1) = 1
ioctl(3, SNDCTL_TMR_CONTINUE or TCSETSF, {B38400 opost isig icanon echo ...}) = 0
rt_sigaction(SIGALRM, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGHUP, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGTERM, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGTSTP, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGTTIN, {SIG_DFL}, NULL, 8) = 0
close(3) = 0
open("rsa_test", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0600) = 3
write(3, "SSH PRIVATE KEY FILE FORMAT 1.1\n"..., 524) = 524
close(3) = 0
write(1, "Your identification has been sav"..., 48) = 48
open("rsa_test.pub", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0644) = 3
fcntl64(3, F_GETFL) = 0x8001 (flags O_WRONLY|O_LARGEFILE)
fstat64(3, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x50b5d000
_llseek(3, 0, [0], SEEK_CUR) = 0
write(3, "1024 35 156605430463124713245584"..., 328) = 328
close(3) = 0
munmap(0x50b5d000, 4096) = 0
write(1, "Your public key has been saved i"..., 48) = 48
write(1, "The key fingerprint is:\n", 24) = 24
write(1, "99:63:63:6c:c5:c4:25:fd:fb:3d:9e"..., 58) = 58
munmap(0x50b5e000, 4096) = 0
exit_group(0) = ?
|
|
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 11:19 am Post subject: |
|
|
| makoomba wrote: | | avevo fatto solo un grep degli open, ti posto direttamente il mio. |
Il mio si inchioda quando fa l'uname...
/EDIT 1
Non so se conta ma non ho settato nel file /etc/hosts il mio ip ed il relativo nome del mio pc...
ho solo editato i file /etc/conf.d/domainname e /etc/conf.d/hostname in fase di installazione.
/EDIT 2
Il problema permane comunque.
/EDIT3
Su google ho trovato dei post sparsi qua e la che riportano il mio stesso identico problema...
ma nessuno di loro ha risolto la questione.
/EDIT4
Any idea??? |
|
| Back to top |
|
|
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Mon Oct 17, 2005 7:48 pm Post subject: |
|
|
Penso che non cambi molto  ma prova a compilare con:
| Code: | | CFLAGS="-O2 -pipe -fomit-frame-pointer" |
in caso negativo posta un bug report su bugs.gentoo.org.
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
Flonaldo
Guru
Joined: 21 Nov 2003
Posts: 572
Location: Bologna
|
| Posted: Mon Oct 17, 2005 8:33 pm Post subject: |
|
|
Forse dirò una emerita cazzata ma hai provato a muovere il mouse quando deve creare le chiavi?
_________________
Odio un po' di meno gli uomini coi capelli rossi
La mia musica http://www.last.fm/user/Flonaldo/ |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 9:02 pm Post subject: |
|
|
| Flonaldo wrote: | | Forse dirò una emerita cazzata ma hai provato a muovere il mouse quando deve creare le chiavi? |
Si... e parecchio anche! |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Mon Oct 17, 2005 9:04 pm Post subject: |
|
|
| gutter wrote: | Penso che non cambi molto ma prova a compilare con:
| Code: | | CFLAGS="-O2 -pipe -fomit-frame-pointer" |
in caso negativo posta un bug report su bugs.gentoo.org. |
Nulla da fare... le ho provate quasi tutte "riemergiamenti" compresi.
La faccenda e' comunque pesante perche' mi devo connettere al pc solo via ssh praticamente... infatti sto ricompilando tutta la gentoo da zero (stage-1) ma con una differenza stavolta; ho deciso di non utilizzare distcc... cosa che invece avevo fatto prima. |
|
| Back to top |
|
|
.:deadhead:.
Advocate
Joined: 25 Nov 2003
Posts: 2963
Location: Milano, Italy
|
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Tue Oct 18, 2005 8:36 am Post subject: |
|
|
dando un
| Code: | | dd if=/dev/urandom count=100| bzip2 > test.bz2 ; ls -l test.bz2 |
che dimensione ha il file ? |
|
| Back to top |
|
|
Flonaldo
Guru
Joined: 21 Nov 2003
Posts: 572
Location: Bologna
|
| Posted: Tue Oct 18, 2005 12:30 pm Post subject: |
|
|
| quantumwire wrote: | | Flonaldo wrote: | | Forse dirò una emerita cazzata ma hai provato a muovere il mouse quando deve creare le chiavi? |
Si... e parecchio anche! |
non crederlo! aveva un suo fondo di verità! infatti mi confondevo con un altra cosa; generatore di chiavi private tramite il movimento del mouse!
Ovviamente non centra nulla con quello che devi fare e per questo avevo detto che sarebbe potuta essere una cazzata...
Pardon! Mea culpa
_________________
Odio un po' di meno gli uomini coi capelli rossi
La mia musica http://www.last.fm/user/Flonaldo/ |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Wed Oct 19, 2005 2:33 pm Post subject: |
|
|
| makoomba wrote: | dando un
| Code: | | dd if=/dev/urandom count=100| bzip2 > test.bz2 ; ls -l test.bz2 |
che dimensione ha il file ? |
Allora... ho reinstallato tutto dallo stage-1 ed il problema persiste ancora!
A questo punto ho la sensazione che il problema sia nel kernel in termini di flag non/erroneamente settate... di che moduli/opzioni del kernel ha bisogno ssh-keygen per funzionare???
/EDIT
fatto come mi hai detto ed ottengo:
| Code: | 100+0 records in
100+0 records out
-rw-r--r-- 1 root root 51763 Oct 19 14:35 test.bz2 |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
