View previous topic :: View next topic |
Author |
Message |
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Fri Dec 23, 2005 11:02 am Post subject: Dual Monitor/Box | 1 card | separate screens [SOLVED] |
|
|
Hi!
Todays question:
2 monitors in one single video card box
My hardware :
Code: |
0000:00:00.0 Host bridge: Intel Corporation 925X/XE Memory Controller Hub (rev 0e)
0000:00:01.0 PCI bridge: Intel Corporation 925X/XE PCI Express Root Port (rev 0e)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
0000:00:1f.2 SATA controller: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 04)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
0000:01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88W8310 and 88W8000G [Libertas] 802.11g client chipset (rev 07)
0000:01:03.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
0000:01:04.0 Mass storage controller: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, embedded seems (rev 13)
0000:01:05.0 Mass storage controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
0000:01:0b.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
0000:01:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 15)
0000:03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 15)
0000:05:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)
Plus 2 monitors.
1 viewsonic 19" LCD using DVI and a 14" Acer Analog CRT |
The video card is as posted above nVidia Corporation NV43 [GeForce 6600] (rev a2) and it has a DVI output and an Analog output.
My current drivers are media-video/nvidia-kernel Latest version available: 1.0.8174-r1
I have tried the monitors at the same after rebooting the box and they both work until i get to the login manager. This leads me to belive that some extra xorg confs will fix the issue.
Now my question starts dividing itself into a couple more .
1: Having both monitors working after the login manager i want 1 to be used by me while using my desktop and the second one as a system monitor.
the ideia is having the second monitor working with an independent screen where i will just open system monitor applications; ie : top, iptraf, apachetop, and other like these.
some doubts here : can i do this and use the same keyboard and mouse for both monitors and i will just be switching them whenever i want or its best to use an extra keyboard and mouse ?
2: if things work for phase one and i am able to have to independend screens in the same box, i am now wanting to have it working for 2 independent users.
in other words: 1 box, 1 video card with 2 outputs, 2 keyboards, 2 mice for 2 idependent users.
The second keyboard and mouse would be usb
i was given this HowTO http://www.c3sl.ufpr.br/multiterminal/howtos/howto-faketty-en.htm which seem to give some help about it, but its not a gentoo howto and looks like to be made for more than 1 video card.
I never played around with xorg before, so this is new ground for me.
I also would like to hear from gentoo users about this idea. Maybe some of you have achived this kind of configuration.
Ideas, tips, suggestions are all welcome.
Thank you _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244
Last edited by HeXiLeD on Sun Dec 17, 2006 2:04 pm; edited 2 times in total |
|
Back to top |
|
|
robnotts Guru
Joined: 15 Mar 2004 Posts: 405 Location: Nottingham, UK
|
Posted: Fri Dec 23, 2005 2:19 pm Post subject: |
|
|
Here is a starting point...
Code: |
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "True"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# The module search path. The default path is shown here.
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/freefont"
FontPath "/usr/share/fonts/sharefonts"
FontPath "/usr/share/fonts/terminus"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/freefont"
FontPath "/usr/share/fonts/artwiz"
FontPath "/usr/share/fonts/ukr"
FontPath "/usr/share/fonts/urw-fonts"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/ukr"
FontPath "/usr/share/fonts/urw-fonts"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoftpro"
Option "XkbLayout" "gb"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Wired Mouse Connected To PS/2 Socket
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mouse0"
Option "ZAxisMapping" "4 5"
Option "CorePointer"
EndSection
# Wireless Mouse Connected To USB
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mouse1"
Option "ZAxisMapping" "4 5"
Option "CorePointer"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
HorizSync 30-96
VertRefresh 50-75
EndSection
Section "Monitor"
Identifier "TV"
HorizSync 31.4 - 61
VertRefresh 56 - 75
DisplaySize 160 90
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
# Device configured by xorgconfig:
Section "Device"
Option "SWcursor" "False"
Option "HWcursor" "True"
Option "NvAGP" "3"
Option "IgnoreEDID" "False"
Option "NoDDC" "False"
Option "ConnectedMonitor" "CRT"
Option "TVStandard" "PAL-I"
Option "TVOutFormat" "SVIDEO"
Option "RenderAccel" "True"
Option "CursorShadow" "True"
Option "UseEdidFreqs" "True"
Option "UseEdidDpi" "False"
Option "DPI" "96 x 96"
Option "XvMCUsesTextures" "False"
Option "AllowGLXWithComposite" "True"
Identifier "Nvidia Geforce FX 6600 LCD"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce FX 6600"
BusID "PCI:5:0:0"
Screen 0
EndSection
# Device configured by xorgconfig for TV Output:
Section "Device"
Option "SWcursor" "False"
Option "HWcursor" "True"
Option "NvAGP" "3"
Option "IgnoreEDID" "False"
Option "NoDDC" "False"
Option "ConnectedMonitor" "TV"
Option "TVStandard" "PAL-I"
Option "TVOutFormat" "SVIDEO"
Option "RenderAccel" "True"
Option "CursorShadow" "True"
# Option "UseEdidFreqs" "True"
# Option "UseEdidDpi" "False"
# Option "DPI" "96 x 96"
Option "XvMCUsesTextures" "False"
Option "AllowGLXWithComposite" "True"
Identifier "Nvidia Geforce FX 6600 TV"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce FX 6600"
BusID "PCI:5:0:0"
Screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 0"
Device "Nvidia Geforce FX 6600 LCD"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Nvidia Geforce FX 6600 TV"
Monitor "TV"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Screen "Screen 1"
InputDevice "Mouse2" "CorePointer"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
EndSection
# Section "DRI"
# Mode 0666
# EndSection
|
This is a config for two independent screens... the 2nd one (tv) is used for myth tv and mplayer outputs onto the tv rather than the computer monitor.
I have two keyboards, a wireless one to use remotely, and two mice, but the 2nd mouse can be tempremental. I did read somewhere that having two independent keyboards in linux was a problem, due to how the kernel keyboard drivers are set up.
Rob. _________________ ---
Gentoo Phenom][ X4 955 on AMD790 + Geforce 220GT 8GB/1.75TB (Desktop)
+ MythTV (3xFreeview,1xFreesat HD) on 1080p
Gentoo Turion64 X2 Geforce 6150 2GB/120GB (Laptop) |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Fri Dec 23, 2005 3:14 pm Post subject: |
|
|
I have a couple questions as i have started re-doing my xorg from what i am seeing here.
Option "CorePointer"
When this is set, the input device is installed as the core (primary) pointer device. There must be exactly one core pointer. If this option is not set here, or in the ServerLayout section, or from the -pointer command line option, then the first input device that is capable of being used as a core pointer will be selected as the core pointer. This option is implicitly set when the obsolete Pointer section is used.
I never had Option "CorePointer" before. will i need it now ?
and ...
Code: | Option "Protocol" "IMPS/2" |
Mine is auto. should i change it?
also
Code: | Option "Device" "/dev/input/mice" |
Should i change it to /dev/input/mice1" and the other mice2 ? _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244
Last edited by HeXiLeD on Fri Dec 23, 2005 3:41 pm; edited 3 times in total |
|
Back to top |
|
|
pjp Administrator
Joined: 16 Apr 2002 Posts: 20090
|
Posted: Fri Dec 23, 2005 3:24 pm Post subject: |
|
|
Moved from Multimedia _________________ Quis separabit? Quo animo? |
|
Back to top |
|
|
hvengel Guru
Joined: 19 Sep 2004 Posts: 515
|
Posted: Sun Dec 25, 2005 7:08 am Post subject: |
|
|
There are Gentoo guides for setting up nvidia graphics cards. You should look their as a starter. You should problably also look into the possibility of using twinview which is the dual monitor support built into the vnidia driver. It is a little different then normal dual monitor setup in X but once you figure it out it is very flexible and easy to understand. |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Fri Dec 15, 2006 4:24 pm Post subject: |
|
|
As i am now trying to setup this i have 1 first problem that i need to solve before everything else.
note: 2 monitors | 1 video card with 2 outputs ( VGA + DVI )
after connecting the second monitor ( the crt into the analog output/vga ) and restarting X; i get xorg to use the CRT insted or the LCD.
In other words, the one that should be the default monitor ( the LCD on the DVI output ) is not acting like like being default.
Insted It starts the CRT on the vga output.
How can i set xorg to use the LCD as the default monitor and not the crt ?
Bellow my current xorg:
Code: | # **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "cymotionlinux"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
############################
# #
# FIRST MONITOR SETTINGS #
# #
############################
Section "Monitor"
Identifier "viewsonic"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 82.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-150
EndSection
############################
# #
# SECOND MONITOR SETTINGS #
# #
############################
Section "Monitor"
Identifier "nec"
HorizSync 31.4 - 61
VertRefresh 40 - 75
DisplaySize 100 60
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# Driver "nvidia"
############################
# #
# FIRST MONITOR SETTINGS #
# #
############################
# Standard VGA Device:
Section "Device"
Identifier "nVidia GeForce GT 6600"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce GT 6600"
VideoRam 262144
Screen 0
Option "NVagp" "1"
Option "RenderAccel" "on"
Option "DigitalVibrance" "35"
Option "NoFlip" "on"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
BusID "PCI:5:0:0"
# Clocks 25.2 28.3
EndSection
############################
# #
# SECOND MONITOR SETTINGS #
# #
############################
Section "Device"
Identifier "nVidia GeForce GT 6600"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce GT 6600"
VideoRam 262144
BusID "PCI:5:0:0"
Screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
############################
# #
# FIRST MONITOR SETTINGS #
# #
############################
Section "Screen"
Identifier "screen 0"
Device "nVidia GeForce GT 6600"
Monitor "viewsonic"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
############################
# #
# SECOND MONITOR SETTINGS #
# #
############################
Section "Screen"
Identifier "screen 1"
Device "nVidia GeForce GT 6600"
Monitor "nec"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
############################
# #
# FIRST MONITOR SETTINGS #
# #
############################
Section "ServerLayout"
# The Identifier line must be present
Identifier "nVidia GeForce GT 6600"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
############################
# #
# SECOND MONITOR SETTINGS #
# #
############################
Section "ServerLayout"
Identifier "nVidia GeForce GT 6600"
Screen "Screen 1"
EndSection
# Section "DRI"
# Mode 0666
# EndSection |
_________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Fri Dec 15, 2006 7:09 pm Post subject: |
|
|
#emerge nvidia-settings ; nvidia-settings
Set it the way you want and save.
Restart X
my current and working xorg.conf for 2 monitors 1 video card with DVI and VGA outputs, 1 mouse + keyboard.
Code: | # nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (root@gentrix) Sat Nov 11 03:26:28 EST 2006
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1024 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# RgbPath "/usr/lib64/X11/rgb"
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ViewSonic VG191"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "NEC E500"
HorizSync 31.0 - 69.0
VertRefresh 55.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600"
BusID "PCI:5:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600"
BusID "PCI:5:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "DFP: 1280x1024 +0+0; DFP: 1024x768 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "metamodes" "CRT: 1024x768 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection |
SOLVED _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
Mehlano n00b
Joined: 08 Dec 2006 Posts: 29
|
Posted: Fri Dec 15, 2006 7:33 pm Post subject: |
|
|
Blue-Steel wrote: | #emerge nvidia-settings ; nvidia-settings
Set it the way you want and save.
Restart X
|
hm...
Code: |
eike@gentie ~ $ nvidia-settings -g
ERROR: NV-CONTROL extension not found on this Display.
ERROR: Unable to determine number of NVIDIA GPUs on ':0.0'.
ERROR: Unable to determine number of NVIDIA Frame Lock Devices on ':0.0'.
ERROR: Unable to determine number of NVIDIA VCSCs on ':0.0'.
|
..running nvidia-drivers, beryl and XGL with AIGLX
xorg.conf
Code: |
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
# ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "dri"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
EndSection
Section "ServerFlags"
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "AutoRepeat" "500 5"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor[0]"
VertRefresh 75
EndSection
Section "Monitor"
Identifier "Monitor[1]"
ModelName "PAL TV"
VendorName "ORION"
VertRefresh 60
HorizSync 30-50
EndSection
Section "Device"
Identifier "Device[0]"
Driver "nvidia"
BoardName "nVidia GeForce 6660"
Option "RenderAccel" "1"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "ConnectedMonitor" "DVI"
Option "IgnoreDisplayDevices" "DFP"
Screen 0
BusID "PCI:04:00:00"
EndSection
Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
Viewport 0 0
EndSubSection
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
Device "Device[1]"
Identifier "Screen[1]"
Monitor "Monitor[1]"
EndSection
Section "Device"
BoardName "GeForce-6"
Driver "nvidia"
Identifier "Device[1]"
VendorName "Nvidia"
Option "AllowGLXWithComposite" "true"
Option "NoLogo" "on"
Option "CursorShadow" "on"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "2"
Option "CursorShadowYOffset" "2"
Option "TVOutFormat" "Composite"
Option "TVStandard" "PAL-G"
Option "ConnectedMonitor" "DFI,TV"
Option "IgnoreDisplayDevices" "DFP"
BusID "PCI:04:00:00"
Screen 1
EndSection
Section "ServerLayout"
Identifier "Main Layout"
Screen 0 "Screen[0]"
Screen 1 "Screen[1]" RightOf "Screen[0]"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "AIGLX" "true"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
|
Any hints ? _________________ myWorkstation::
1x Intel Pentium Core 2 Duo E6600 @ 2.4 GHz, 2048 MB RAM, 640 MB XFX 8800 GTS, Gnome w/ Beryl 0.1.4, Kernel: 2.6.19-r5
Registered Linux User #437626 |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Sat Dec 16, 2006 12:31 am Post subject: |
|
|
What is it that you are planning to do ? the same kind of setup as me ? give me details.
Show me :
Code: | # lspci -v | grep VGA
# emerge -pv nvidia-drivers
# emerge -pv nvidia-settings |
and to run nvidia-settings u must do it as root. I also dont understand why you did " nvidia-settings -g" why the -g ?
note: backup your current xorg.conf _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
Mehlano n00b
Joined: 08 Dec 2006 Posts: 29
|
Posted: Sat Dec 16, 2006 11:12 am Post subject: |
|
|
Blue-Steel wrote: | What is it that you are planning to do ? the same kind of setup as me ? give me details.
Show me :
Code: | # lspci -v | grep VGA
# emerge -pv nvidia-drivers
# emerge -pv nvidia-settings |
and to run nvidia-settings u must do it as root. I also dont understand why you did " nvidia-settings -g" why the -g ?
note: backup your current xorg.conf |
Backup'ed my xorg.conf
..wanted to bring up TwinView: CRT-1 (my TFT-Screen) and TV-0 (results from Xorg.log which detected these devices)
But with this xorg.conf I got on my CRT-1 a big screen and a blank one on TV.
Code: |
gentie ~ # lspci -v | grep VGA
04:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) (prog-if 00 [VGA])
|
Code: |
gentie ~ # emerge -pv nvidia-drivers
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] x11-drivers/nvidia-drivers-1.0.9631 USE="dlloader" 0 kB
Total: 1 package (1 reinstall), Size of downloads: 0 kB
|
Code: |
gentie ~ # emerge -pv nvidia-settings
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] media-video/nvidia-settings-1.0.20061102 0 kB
Total: 1 package (1 reinstall), Size of downloads: 0 kB
|
And here is my xorg.conf from todays morning after reading nvidia-docs and XCONFIG example
Code: |
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
# ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "dbe"
Load "glx"
# Load "dri"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
EndSection
Section "ServerFlags"
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "AutoRepeat" "500 5"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor[0]"
VertRefresh 75
EndSection
Section "Device"
Identifier "Device[0]"
Driver "nvidia"
BoardName "nVidia GeForce 6660"
Option "RenderAccel" "1"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "XAANoOffscreenPixmaps" "true"
BusID "PCI:04:00:00"
Option "TwinView"
Option "SecondMonitorHorizSync" "31-82"
Option "SecondMonitorVertRefresh" "55-120"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
Option "ConnectedMonitor" "CRT-1, TV-0"
Option "TVStandard" "PAL-G"
Option "TVOutFormat" "COMPOSITE"
EndSection
Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Main Layout"
Screen "Screen[0]"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "AIGLX" "true"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
|
_________________ myWorkstation::
1x Intel Pentium Core 2 Duo E6600 @ 2.4 GHz, 2048 MB RAM, 640 MB XFX 8800 GTS, Gnome w/ Beryl 0.1.4, Kernel: 2.6.19-r5
Registered Linux User #437626 |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Mon Dec 18, 2006 12:57 pm Post subject: |
|
|
Well my current setup is not for TV out. TV out ill be added later as the 3rd screen.
And currently i am not using twinview but "separate screens"
As for the nvidia-settings application; try running it like this # nvidia-settings ( without the -g )
Bellow is my current and working config:
(some parts were edited manually later)
Code: | # nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (root@gentrix) Sat Nov 11 03:26:28 EST 2006
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# *********************************************************************
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
Load "extmod"
Load "freetype"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
Option "Xinerama" "0"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "cymotionlinux"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5 6 7"
Option "Resolution" "256
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ViewSonic VG191"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "NEC E500"
HorizSync 31.0 - 69.0
VertRefresh 55.0 - 120.0
Option "DPMS"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600"
BusID "PCI:5:0:0"
Screen 0
VideoRam 262144
Option "DPMS" "TRUE"
Option "NVagp" "1"
Option "RenderAccel" "on"
Option "DigitalVibrance" "35"
Option "NoFlip" "on
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600"
BusID "PCI:5:0:0"
VideoRam 262144
Option "DPMS" "TRUE"
Option "NVagp" "1"
Option "RenderAccel" "on"
Option "DigitalVibrance" "35"
Option "NoFlip" "on
Screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "DFP: 1280x1024 +0+0; DFP: 1024x768 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "metamodes" "CRT: 1024x768 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1024 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "OffTime" "15
EndSection
|
_________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|