| View previous topic :: View next topic |
| Author |
Message |
damoncf
Guru
Joined: 05 Oct 2004
Posts: 388
Location: US OH
|
 Posted: Mon Jan 23, 2006 3:16 am Post subject: modprobe -v ndiswrapper (edited) |
 |
|
I am attempting to get my wifi up and running on my Compaq R4000 laptop. I have the 64bit drivers:
| Code: |
localhost misc # ndiswrapper -l
Unknown line at line 5804
Unknown line at line 5805
Unknown line at line 5806
Unknown line at line 5807
Unknown line at line 5808
Unknown line at line 5809
Unknown line at line 5810
Unknown line at line 5811
Unknown line at line 5812
Unknown line at line 5813
Unknown line at line 5814
Unknown line at line 5815
Installed ndis drivers:
netbc564 driver present, hardware present
|
When I go ahead and run modprobe -v ndiswrapper my computer completely locks up. I am unable to do anything including controling capslock on my keyboard. I had music running one time and the bit that was playing started to loop like an old record skipping.
I can post any info needed to solve this.
Thx
Damon |
|
| Back to top |
|
 |
damoncf
Guru
Joined: 05 Oct 2004
Posts: 388
Location: US OH
|
| Posted: Mon Jan 30, 2006 4:53 am Post subject: update new info |
|
|
I found some new info that might be useful. This is what I get when I hit my wireless button on my laptop. I have included my dmesg after having done it as well.
| Code: |
localhost dev # udevmonitor --env
udevmonitor prints the received event from the kernel [UEVENT]
and the event which udev sends out after rule processing [UDEV]
UEVENT[1138596711.469058] remove@/class/bluetooth/hci0
ACTION=remove
DEVPATH=/class/bluetooth/hci0
SUBSYSTEM=bluetooth
SEQNUM=1174
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
PHYSDEVBUS=usb
PHYSDEVDRIVER=hci_usb
INTERFACE=hci0
UEVENT[1138596711.485135] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
SUBSYSTEM=usb
SEQNUM=1175
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UEVENT[1138596711.485189] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
SUBSYSTEM=usb
SEQNUM=1176
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UEVENT[1138596711.485219] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
SUBSYSTEM=usb
SEQNUM=1177
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=255/255/255
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFFiscFFipFF
UEVENT[1138596711.485249] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
SUBSYSTEM=usb
SEQNUM=1178
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=254/1/0
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFEisc01ip00
UEVENT[1138596711.485278] remove@/class/usb_device/usbdev2.4
ACTION=remove
DEVPATH=/class/usb_device/usbdev2.4
SUBSYSTEM=usb_device
SEQNUM=1179
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
MAJOR=189
MINOR=131
UEVENT[1138596711.485305] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
SUBSYSTEM=usb
SEQNUM=1180
PHYSDEVBUS=usb
UDEV [1138596711.789008] remove@/class/bluetooth/hci0
UDEV_LOG=0
ACTION=remove
DEVPATH=/class/bluetooth/hci0
SUBSYSTEM=bluetooth
SEQNUM=1174
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
PHYSDEVBUS=usb
PHYSDEVDRIVER=hci_usb
INTERFACE=hci0
UDEVD_EVENT=1
UDEV [1138596711.822671] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
UDEV_LOG=0
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
SUBSYSTEM=usb
SEQNUM=1176
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UDEVD_EVENT=1
UDEV [1138596711.827190] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
UDEV_LOG=0
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
SUBSYSTEM=usb
SEQNUM=1177
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=255/255/255
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFFiscFFipFF
UDEVD_EVENT=1
UDEV [1138596711.831263] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
UDEV_LOG=0
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
SUBSYSTEM=usb
SEQNUM=1175
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UDEVD_EVENT=1
UDEV [1138596711.835856] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
UDEV_LOG=0
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
SUBSYSTEM=usb
SEQNUM=1178
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/004
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=254/1/0
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFEisc01ip00
UDEVD_EVENT=1
UDEV [1138596711.855239] remove@/devices/pci0000:00/0000:00:13.0/usb2/2-4
UDEV_LOG=0
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
SUBSYSTEM=usb
SEQNUM=1180
PHYSDEVBUS=usb
UDEVD_EVENT=1
UDEV [1138596711.883396] remove@/class/usb_device/usbdev2.4
UDEV_LOG=0
ACTION=remove
DEVPATH=/class/usb_device/usbdev2.4
SUBSYSTEM=usb_device
SEQNUM=1179
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
MAJOR=189
MINOR=131
UDEVD_EVENT=1
DEVNAME=/dev/bus/usb/002/004
UEVENT[1138596714.660424] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
SUBSYSTEM=usb
SEQNUM=1181
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
UEVENT[1138596714.662057] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
SUBSYSTEM=usb
SEQNUM=1182
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UEVENT[1138596714.666922] add@/class/bluetooth/hci0
ACTION=add
DEVPATH=/class/bluetooth/hci0
SUBSYSTEM=bluetooth
SEQNUM=1183
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
PHYSDEVBUS=usb
PHYSDEVDRIVER=hci_usb
INTERFACE=hci0
UEVENT[1138596714.666971] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
SUBSYSTEM=usb
SEQNUM=1184
PHYSDEVBUS=usb
PHYSDEVDRIVER=hci_usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UEVENT[1138596714.667004] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
SUBSYSTEM=usb
SEQNUM=1185
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=255/255/255
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFFiscFFipFF
UEVENT[1138596714.667033] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
SUBSYSTEM=usb
SEQNUM=1186
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=254/1/0
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFEisc01ip00
UEVENT[1138596714.667063] add@/class/usb_device/usbdev2.5
ACTION=add
DEVPATH=/class/usb_device/usbdev2.5
SUBSYSTEM=usb_device
SEQNUM=1187
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
MAJOR=189
MINOR=132
UDEV [1138596714.687690] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4
UDEV_LOG=0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
SUBSYSTEM=usb
SEQNUM=1181
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
UDEVD_EVENT=1
UDEV [1138596715.676599] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
UDEV_LOG=0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1
SUBSYSTEM=usb
SEQNUM=1184
PHYSDEVBUS=usb
PHYSDEVDRIVER=hci_usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UDEVD_EVENT=1
UDEV [1138596715.676662] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
UDEV_LOG=0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.3
SUBSYSTEM=usb
SEQNUM=1186
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=254/1/0
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFEisc01ip00
UDEVD_EVENT=1
UDEV [1138596715.676698] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
UDEV_LOG=0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.2
SUBSYSTEM=usb
SEQNUM=1185
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=255/255/255
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icFFiscFFipFF
UDEVD_EVENT=1
UDEV [1138596715.691441] add@/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
UDEV_LOG=0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
SUBSYSTEM=usb
SEQNUM=1182
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/005
PRODUCT=3f0/11d/17
TYPE=224/1/1
INTERFACE=224/1/1
MODALIAS=usb:v03F0p011Dd0017dcE0dsc01dp01icE0isc01ip01
UDEVD_EVENT=1
UDEV [1138596715.720009] add@/class/bluetooth/hci0
UDEV_LOG=0
ACTION=add
DEVPATH=/class/bluetooth/hci0
SUBSYSTEM=bluetooth
SEQNUM=1183
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0
PHYSDEVBUS=usb
PHYSDEVDRIVER=hci_usb
INTERFACE=hci0
UDEVD_EVENT=1
UDEV [1138596715.739650] add@/class/usb_device/usbdev2.5
UDEV_LOG=0
ACTION=add
DEVPATH=/class/usb_device/usbdev2.5
SUBSYSTEM=usb_device
SEQNUM=1187
PHYSDEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-4
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
MAJOR=189
MINOR=132
UDEVD_EVENT=1
DEVNAME=/dev/bus/usb/002/005
|
| Code: |
damon@localhost ~ $ dmesg
Bootdata ok (command line is root=/dev/hda3 no_timer_check pci=biosirq notsc noapic noapictimer pci=noacpi pci=irqroute clock=pmtmr noapictimer )
Linux version 2.6.14-gentoo-r3 (root@localhost) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Thu Dec 1 15:55:00 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data)
BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7df0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000003fef9500
ACPI: FADT (v001 HP Piranha 0x06040000 ATI 0x000f4240) @ 0x000000003fefee06
ACPI: MCFG (v001 ATI Piranha 0x06040000 LOHR 0x0000005f) @ 0x000000003fefee7a
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003fefeeb6
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003fefefa6
ACPI: DSDT (v001 HP 3085 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003fef0000
Using 20 for the hash shift. Max adder is 3fef0000
Using node hash shift of 20
Bootmem setup node 0 0000000000000000-000000003fef0000
On node 0 totalpages: 261775
DMA zone: 3999 pages, LIFO batch:1
Normal zone: 257776 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:7 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: <6>Product ID: <6>APIC at: 0xFEE00000
I/O APIC #1 Version 33 at 0xFEC00000.
Setting APIC routing to flat
Processors: 1
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Checking aperture...
CPU 0: aperture @ 1886000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/hda3 no_timer_check pci=biosirq notsc noapic noapictimer pci=noacpi pci=irqroute clock=pmtmr noapictimer
PCI: Unknown option `biosirq'
PCI: Unknown option `irqroute'
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2393.099 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1023704k/1047488k available (4487k kernel code, 23396k reserved, 1902k data, 276k init)
Calibrating delay using timer specific routine.. 4795.44 BogoMIPS (lpj=9590886)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0 -> Core 0
mtrr: v2.0 (20020519)
ACPI: setting ELCR to 0e00 (from 0c00)
Disabling APIC timer
Brought up 1 CPUs
Disabling vsyscall due to use of PM timer
time.c: Using PM based timekeeping.
testing NMI watchdog ... OK.
softlockup thread 0 started up.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: Embedded Controller [EC0] (gpe 26)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid SYN011A
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: match found with the PnP device '00:07' and the driver 'system'
pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
pnp: 00:07: ioport range 0x220-0x22f has been reserved
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: match found with the PnP device '00:08' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: b0100000-b01fffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:04.0
IO window: 0000a400-0000a4ff
IO window: 0000a800-0000a8ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: b0200000-b02fffff
PREFETCH window: 50000000-51ffffff
PCI: Device 0000:00:04.0 not available because of resource collisions
PCI: Setting latency timer of device 0000:00:04.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.24 [Flags: R/W DEBUG].
Initializing Cryptographic API
PCI: Device 0000:00:04.0 not available because of resource collisions
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
ppdev: user-space parallel port driver
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
SyncLink PC Card driver $Revision: 4.34 $
SyncLink PC Card driver $Revision: 4.34 $, tty major#253
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using monotonic_clock().
tridentfb: Trident framebuffer 0.7.8-NEWAPI initializing
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (55 C)
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:05' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:06' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
pnp: the driver 'serial' has been registered
pnp: the driver 'parport_pc' has been registered
mice: PS/2 mouse device common for all mice
input: PC Speaker
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Intel(R) PRO/1000 Network Driver - version 6.0.60-k2
Copyright (c) 1999-2005 Intel Corporation.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41.
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:03:06.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xffffc20000010400, 00:0f:b0:79:1c:51, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
orinoco 0.15rc2 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_cs 0.15rc2 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_plx 0.15rc2 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
orinoco_pci 0.15rc2 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
orinoco_tmd 0.15rc2 (Joerg Dorchain <joerg@dorchain.net>)
spectrum_cs 0.15rc2 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, et al)
airo: Probing for PCI adapters
airo: Finished probing for PCI adapters
netconsole: not configured, aborting
Linux video capture interface: v1.00
V4L-Driver for Vision CPiA based cameras v1.2.3
Since in-kernel colorspace conversion is not allowed, it is disabled by default now. Users should fix the applications in case they don't work without conversion reenabled by setting the 'colorspace_conv' module parameter to 1<6>USB driver for Vision CPiA based cameras v1.2.3
usbcore: registered new driver cpia
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: FUJITSU MHT2080AT PL, ATA DISK drive
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x23a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L532M, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[b0208000-b02087ff] Max Packet=[2048]
video1394: Installed video1394 module
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
ieee1394: Loaded AMDTP driver
ieee1394: Loaded CMP driver
Yenta: CardBus bridge found at 0000:03:04.0 [103c:3085]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to ISA
Yenta TI: socket 0000:03:04.0, mfunc 0x00aa1b22, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 11, io mem 0xb0002000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 11, io mem 0xb0000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 11, io mem 0xb0001000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
usb 2-4: new full speed USB device using ohci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Bluetooth: Virtual HCI driver ver 1.2
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.4
wbsd: Copyright(c) Pierre Ossman
pnp: the driver 'wbsd' has been registered
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 4
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.4
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
spurious 8259A interrupt: IRQ7.
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xe (1200 mV)
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x10 (1150 mV)
cpu_init done, current fid 0x10, vid 0x2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[593f0200ae494179]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 276k freed
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1 across:506036k
EXT3 FS on hda3, internal journal
driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 Linuxant inc.' taints kernel.
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
driverloader: stack=8192/88/0 REGPARM SMP
usbcore: registered new driver driverloader
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
hci_cmd_task: hci0 command tx timeout
usb 2-4: USB disconnect, address 2
usb 2-4: new full speed USB device using ohci_hcd and address 3
atkbd.c: Unknown key pressed (translated set 2, code 0x8a on isa0060/serio0).
atkbd.c: Use 'setkeycodes e00a <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x8a on isa0060/serio0).
atkbd.c: Use 'setkeycodes e00a <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb1 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e031 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb1 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e031 <keycode>' to make it known.
usb 2-4: USB disconnect, address 3
usb 2-4: new full speed USB device using ohci_hcd and address 4
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
usb 2-4: USB disconnect, address 4
usb 2-4: new full speed USB device using ohci_hcd and address 5
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
