| View previous topic :: View next topic |
| Author |
Message |
johndo
n00b
Joined: 22 Nov 2003
Posts: 32
|
 Posted: Sun Dec 25, 2005 4:37 am Post subject: Genkernel ERROR: Could not find klibc tarball [Solved] |
 |
|
usually I run
| Code: | | genkernel --menuconfig --lvm2 --dmraid --bootloader=grub --install all |
but running this gets the same error faster
they both fail with this error
| Code: | | * ERROR: Could not find klibc tarball: |
This is my /var/log/genkernel.log:
| Code: | * Gentoo Linux Genkernel; Version 3.3.10
* Running with options: initrd
* Linux Kernel 2.6.14-gentoo-r5 for x86...
* Gentoo Linux Genkernel; Version 3.3.10
* Running with options: initrd
* ERROR: Could not find klibc tarball:
* -- Grepping log... --
* -- End log... --
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
|
after some searching all these packages seem to be realted.
| Code: | # emerge -pv genkernel klibc udev
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild R ] sys-kernel/genkernel-3.3.10 USE="-bootsplash -ibm" 0 kB
[ebuild R ] dev-libs/klibc-1.1.1 0 kB
[ebuild R ] sys-fs/udev-079 0 kB
Total size of downloads: 0 kB
|
I have also re-emerged all he above packages with no luck
Last edited by johndo on Sun Jan 15, 2006 9:58 pm; edited 1 time in total |
|
| Back to top |
|
 |
roleez
n00b
Joined: 30 Dec 2005
Posts: 1
Location: Baja
|
| Posted: Fri Dec 30, 2005 12:04 pm Post subject: Re: Genkernel ERROR: Could not find klibc tarball |
|
|
| johndo wrote: |
| Code: | | * ERROR: Could not find klibc tarball: |
|
Hi,
just do it:
emerge -C genkernel
emerge "<genkernel-3.3.6"
...and have fun! 
Best regards,
Roland |
|
| Back to top |
|
|
johndo
n00b
Joined: 22 Nov 2003
Posts: 32
|
| Posted: Sun Jan 15, 2006 9:58 pm Post subject: |
|
|
| Upgraded genkernel and problemis gone. |
|
| Back to top |
|
|
gordon...
n00b
Joined: 06 Apr 2005
Posts: 14
|
| Posted: Thu Jan 26, 2006 3:53 pm Post subject: genkernel and klibc |
|
|
Hi, I tried to update my system from 2.6.9 Kernel to 2.6.15-r1
genkernel --menuconfig --udev --bootloader=grub all
and got these message:
for successful build to /etc/kernels/kernel-config-x86-2.6.15-gentoo-r1
* --udev is deprecated and no longer necessary as udev is on by default
* Gentoo Linux Genkernel; Version 3.3.10
* Running with options: --udev --menuconfig --bootloader=grub all
* ERROR: Could not find klibc tarball:
I emerged udev 079-r1 and genkernel 3.3.10
if I use a genkernel < 3.3.6 I get the mesage that I dont have a udev tarball.
Strange, because the genkernel package has a klibc package in it.
Thx and regards
Gordon |
|
| Back to top |
|
|
koenderoo
Guru
Joined: 03 Jan 2004
Posts: 514
Location: Zwolle, The Netherlands
|
| Posted: Thu Jan 26, 2006 7:38 pm Post subject: |
|
|
as shown in your error: udev is depricated. Translated that means it's no longer needed!
unmerge udev and perhaps emerge devfsd (start the deamon afterwards) |
|
| Back to top |
|
|
nixnut
Bodhisattva
Joined: 09 Apr 2004
Posts: 10974
Location: the dutch mountains
|
| Posted: Thu Jan 26, 2006 7:40 pm Post subject: |
|
|
| koenderoo wrote: | as shown in your error: udev is depricated. Translated that means it's no longer needed!
unmerge udev and perhaps emerge devfsd (start the deamon afterwards) |
NONONO. Do NOT unmerge udev. The message just means that specifying --udev with genkernel is no longer necessary.
Solution to the klibc problem here: https://forums.gentoo.org/viewtopic-t-416096-highlight-klibc+tarball.html
_________________
Please add [solved] to the initial post's subject line if you feel your problem is resolved. Help answer the unanswered
talk is cheap. supply exceeds demand |
|
| Back to top |
|
|
gordon...
n00b
Joined: 06 Apr 2005
Posts: 14
|
| Posted: Thu Jan 26, 2006 8:52 pm Post subject: |
|
|
Hi,
that's my problem. If I use the solution for the klibc. I have another problem.
I get the message "can't find the udev tarball".
My Distri was 2004.3 and I installed the 2.6.9 dev-sources.
Maybe I should try building the kernel without genkernel?
thx gordon |
|
| Back to top |
|
|
wubante
n00b
Joined: 27 Jan 2004
Posts: 21
|
| Posted: Wed Feb 08, 2006 8:25 pm Post subject: genkernel and klibc |
|
|
upgrade to the latest genkernel.
move /etc/._cfg000_genkernel.conf to /etc/genkernel.conf
and my problem solved |
|
| Back to top |
|
|
Dabljuh
n00b
Joined: 04 Mar 2004
Posts: 48
|
| Posted: Wed Feb 08, 2006 8:27 pm Post subject: |
|
|
I got the same problem. Both with 3.3.10 and 3.3.11
* Copying config for successful build to /etc/kernels/kernel-config-x86-2.6.15-gentoo-r4
* ERROR: Could not find klibc tarball:
Which is not surprising seeing as klibc isn't installed at all.
| Code: | emerge -pvt gentoo-sources genkernel klibc udev
These are the packages that I would merge, in reverse order:
Calculating dependencies ...done!
[ebuild R ] sys-fs/udev-084 0 kB
[ebuild N ] dev-libs/klibc-1.2.1-r1 441 kB
[ebuild R ] sys-kernel/genkernel-3.3.11 USE="bootsplash -ibm" 0 kB
[ebuild R ] sys-kernel/gentoo-sources-2.6.15-r4 USE="-build -doc -symlink" 0 kB |
edit: OH. The fucking config file. That explains a lot, because I did check dispatch-conf, which displayed nothing, probably because I moved the /etc shebang from a different system and dispatch-conf didn't pick it up until now that I've upgraded to ~x86 genkernel.... |
|
| Back to top |
|
|
|
Kernel & Hardware
