View previous topic :: View next topic |
Author |
Message |
-azuresky- n00b
Joined: 20 Oct 2004 Posts: 25 Location: germany (nds.)
|
Posted: Wed May 24, 2006 2:29 am Post subject: [solved] NTPD: "nfound=-1, error: Interrupted system ca |
|
|
moin,
ich habe seit einigen tagen ntp installiert:
Code: |
gurke log # eix -e ntp
* net-misc/ntp
Available versions: 4.1.2 4.2.0-r2 4.2.0.20060224 4.2.0.20040617-r3 4.2.0.20050303-r1
Installed: 4.2.0.20060224
Found 1 matches
|
weil ich meine system-logs einrichten wollte, hab ich ein wenig in der ntpd.conf gespielt.
mich hatte sowieso gewundert daß von ntpd gar nix in /var/log/messages landet.
jetzt sieht's gerade so bei mir aus:
Code: |
gurke log # cat /etc/conf.d/ntpd | grep -v "^#"
NTPD_OPTS="-D 3 -l /var/log/ntp.log"
|
Code: |
gurke log # cat /etc/ntp.conf | grep -v "^#"
server ptbtime2.ptb.de
driftfile /var/lib/ntp/ntp.drift
|
einmaliges syncronisieren per ntpd-client funktioniert,
ntpd selbst jedoch gibt folgendes aus:
Code: |
gurke log # ntpd -D 3
Debug1: 3 -> 3 = 3
ntpd 4.2.0a@1.1199-r Wed May 24 02:42:09 CEST 2006 (1)
Debug1: 3 -> 3 = 3
addto_syslog: ntpd 4.2.0a@1.1199-r Wed May 24 02:42:09 CEST 2006 (1)
addto_syslog: set_process_priority: Leave priority alone: priority_done is <2>
addto_syslog: precision = 1.000 usec
create_sockets(123)
addto_syslog: no IPv6 interfaces found
address_okay: listen Virtual: 1, IF name: lo, Up Flag: 1
address_okay: listen Virtual: 1, IF name: wlan0, Up Flag: 1
bind() fd 4, family 2, port 123, addr 0.0.0.0, flags=8
flags for fd 4: 04002
addto_syslog: Listening on interface wildcard, 0.0.0.0#123
bind() fd 5, family 2, port 123, addr 127.0.0.1, flags=0
flags for fd 5: 04002
addto_syslog: Listening on interface lo, 127.0.0.1#123
bind() fd 6, family 2, port 123, addr 192.168.178.4, flags=8
flags for fd 6: 04002
addto_syslog: Listening on interface wlan0, 192.168.178.4#123
create_sockets: ninterfaces=3
interface 0: fd=4, bfd=-1, name=wildcard, flags=0x8, scope=0
sin=0.0.0.0 bcast=0.0.0.0, mask=255.255.255.255
interface 1: fd=5, bfd=-1, name=lo, flags=0x5, scope=0
sin=127.0.0.1 mask=255.0.0.0
interface 2: fd=6, bfd=-1, name=wlan0, flags=0x9, scope=0
sin=192.168.178.4 bcast=192.168.178.255, mask=255.255.255.0
init_io: maxactivefd 6
local_clock: time 0 clock 0.000000 offset 0.000000 freq 0.000 state 0
Debug2: 3 -> 3 = 3
getnetnum given ptbtime2.ptb.de, got 192.53.103.104
key_expire: at 0
peer_clear: at 0 assoc ID 5780 refid INIT
newpeer: 192.168.178.4->192.53.103.104 mode 3 vers 4 poll 6 10 flags 0x1 0x1 ttl 0 key 00000000
authtrust: keyid 0000ffff life 1
report_event: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
addto_syslog: select(): nfound=-1, error: Interrupted system call
MCAST *****sendpkt(fd=6 dst=192.53.103.104, src=192.168.178.4, ttl=0, len=48)
transmit: at 1 192.168.178.4->192.53.103.104 mode 3
poll_update: at 1 192.53.103.104 flags 0001 poll 6 burst 0 last 1 next 65
auth_agekeys: at 1 keys 1 expired 0
timer: refresh ts 0
input_handler: if=2 fd=6 length 48 from c0356768 192.53.103.104
receive: at 1 192.168.178.4<-192.53.103.104 restrict 000
receive: at 1 192.168.178.4<-192.53.103.104 mode 4 code 1
peer 192.53.103.104 event 'event_reach' (0x84) status 'unreach, conf, 1 event, event_reach' (0x8014)
poll_update: at 1 192.53.103.104 flags 0001 poll 6 burst 0 last 1 next 64
clock_filter: popcorn 1.483732 0.000015
addto_syslog: select(): nfound=-1, error: Interrupted system call
addto_syslog: select(): nfound=-1, error: Interrupted system call
addto_syslog: select(): nfound=-1, error: Interrupted system call
addto_syslog: select(): nfound=-1, error: Interrupted system call
addto_syslog: ntpd exiting on signal 2
|
,was ich dann per ^C abgrebrochen habe.
ursprünglich hatte ich die aktuellste nicht ~x86 version und hab auch mit den USE-flags ein wenig rumprobiert.
restrictions hatte ich auch schon in der /etc/ntpd.conf:
Code: |
restrict default ignore
restrict ptbtime2.ptb.de kod nomodify notrap nopeer noquery
restrict 127.0.0.1
|
alles, was ich bisher gemacht habe, führte zum obigen ergebnis
speziell zu diesem problem hab ich nicht viel gefunden, obwohl ich schon ziemlich lange daran sitze.
nur diesen Thread, der mit dem verweis auf einen kleinen how-to beitrag in einem anderen forum-thread wohl gelöst werden konnte.
in dem beitrag ging es um restrictions - hat mich in meinem fall aber noch nicht zur lösung geführt.
späßchen, wie /var/lib/ntp/ntp.drift oder /etc/adjtime löschen, hab ich auch schon durch.
tjo, was man aufeinmal so mitkriegt, wenn man sich denn mal um seine logs kümmert ...
danke für jeden hinweis, gruß, tomsky!
PS: mit eingeschaltetem debuging in der /etc/conf.d/ntpd, wie oben angegeben, startet "/etc/init.d/ntpd start" im vordergrund.
is ja auch eher suboptimal (deshalb starte ich den zur zeit immer manuell)
[edit 24.May 2006 13:15]
die konfigurationsdatei heißt bei mir auch "/etc/ntp.conf" und nicht "/etc/ntpd.conf"
[/edit] _________________ ...there's a mad sun burning on the azuresky
AthlonXP2000 auf AsusA7N8X(nonDelux) mit 512MB-DDR333
GeForce4MX440 AGP8x
Last edited by -azuresky- on Wed May 24, 2006 3:35 pm; edited 3 times in total |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Wed May 24, 2006 10:35 am Post subject: |
|
|
Hi -azuresky-,
hast du die /etc/init.d/ntpd geändert? Oder warum ist es bei dir eine /etc/ntpd.conf ?
Bei mir ist es eine /etc/ntp.conf.
Und sollte in der /etc/conf.d/ntpd nicht auch sowas drinn sein?
Code: | NTPD_OPTS="-u ntp:ntp" |
zeig doch mal das Ergebnis von:
Code: | ntpq -c peer -c as -c rl |
Ma _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
-azuresky- n00b
Joined: 20 Oct 2004 Posts: 25 Location: germany (nds.)
|
Posted: Wed May 24, 2006 11:14 am Post subject: |
|
|
hi Marlo,
Marlo wrote: |
hast du die /etc/init.d/ntpd geändert? Oder warum ist es bei dir eine /etc/ntpd.conf ?
Bei mir ist es eine /etc/ntp.conf.
|
ist es bei mir auch, hatte nur bei allen anderen schnipseln den erzeugenden aufruf mitgegeben,
nur an dieser stelle vergessen und dann falsch nachgetragen
werde meinen ersten beitrag nochmal editieren,
(nachdem ich vorhin schon "seid" durch "seit" ersetzen mußte - aargh! peinlich!)
na denn...
Marlo wrote: |
Und sollte in der /etc/conf.d/ntpd nicht auch sowas drinn sein?
Code: | NTPD_OPTS="-u ntp:ntp" |
|
das hatte ich auch zu anfang drin. läßt ja ntp unter anderem user:gruppe laufen.
sowohl der user ntp, als auch die gruppe ntp existieren, nur, daß der user nicht in der /etc/group eingetragen war.
nachdem dann noch mit dem USE-flag "nodroproot" gespielt hatte, habe ich das "-u ntp:ntp" erstmal weggelassen.
ntpd soll ruhig als root laufen, wenn ich damit das problem einkreisen kann.
Marlo wrote: |
zeig doch mal das Ergebnis von:
Code: | ntpq -c peer -c as -c rl |
|
Code: |
gurke tomsky # ntpq -c peer -c as -c rl
remote refid st t when poll reach delay offset jitter
==============================================================================
ptbtime2.ptb.de .PPS. 1 u 2 64 1 987.100 -2267.8 0.001
ind assID status conf reach auth condition last_event cnt
===========================================================
1 1428 9014 yes yes none reject reachable 1
assID=0 status=c011 sync_alarm, sync_unspec, 1 event, event_restart,
version="ntpd 4.2.0a@1.1199-r Wed May 24 02:42:09 CEST 2006 (1)"?,
processor="i686", system="Linux/2.6.16-gentoo-r7", leap=11, stratum=16,
precision=-20, rootdelay=0.000, rootdispersion=0.060, peer=0,
refid=INIT, reftime=00000000.00000000 Thu, Feb 7 2036 7:28:16.000,
poll=6, clock=0xc81eb7f0.5d1aeb3d, state=0, offset=0.000,
frequency=0.000, noise=0.001, jitter=0.001, stability=0.000
|
das werd ich mir jetzt auch mal in ruhe ansehen. hab noch keine ahnung davon.
...achso: die ptb-server kann ich vom rechner hier aus anpingen.
der rechner hier, ist nicht der, denn ich in der signatur angegeben hatte, wenn doch auch ein athlon(@700Mhz).
gestern habe ich noch generic rtc-support in den kernel aufgenommen. war mir beim suchen irgendwo aufgetaucht.
danke marlo!
_________________ ...there's a mad sun burning on the azuresky
AthlonXP2000 auf AsusA7N8X(nonDelux) mit 512MB-DDR333
GeForce4MX440 AGP8x |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Wed May 24, 2006 12:07 pm Post subject: |
|
|
Ja der ntpd hat keine Verbindung zum timeserver, sonst würde vor ptbtime2.ptb.de ein * stehen.
Versuch es mal damit:
Code: |
############################################################
# Anfang /etc/ntp.conf nur Server
############################################################
# Name of the servers ntpd should sync with
# Please respect the access policy as stated by the responsible person.
#server ntp.example.tld iburst
# Ich nehme Zeitserver der Physikalisch-Technische Bundesanstalt, ttp://www.ptb.de/de/zeit/uhrzeit.html , Braunschweig
# Auch gleich zwei, weil mal einer ausfallen kann.
server ntp1.ptb.de
server ntp2.ptb.de
# Zugriff durch NTP-Server gestatten
restrict ntp1.ptb.de
restrict ntp2.ptb.de
# you should not need to modify the following paths
# Ich nutze das ntp driftfile
logfile /var/log/ntpd.log
driftfile /var/lib/ntp/ntp.drift
#Ich stelle die ungefähre drift meiner box ein.
broadcastdelay 0.008
# Meinem Rechner Zugriff gewähren
#restrict default notrust nomodify
restrict 127.0.0.1
# Meinen Netzrechnern Zugriff gewähren, aber sie dürfen nichts ändern
restrict 192.168.0.2 mask 255.255.255.0 notrust nomodify notrap
# allen anderen Rechnern Zugriff verwehren
restrict default notrust nomodify nopeer
############################################################
# Ende /etc/ntp.conf
############################################################
|
Code: |
############################################################
#Anfang /etc/conf.d/ntpd
############################################################
#
NTPD_OPTS="-u ntp:ntp"
#
############################################################
# Ende /etc/conf.d/ntpd
##########################################################
|
Zum einstellen der Zeit verwendet man:
Code: |
ntpdate ntp1.ptb.de
ntpdate ntp2.ptb.de
|
Danach erst:
Code: |
rc-update add ntpd default
/etc/init.d/ntpd start
|
und zum testen, ob alles geht:
Code: |
ntpq -p #und/oder
ntpdc -p
|
Beispiel für alles OK: Code: |
ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
ntp1.ptb.de .PTB. 1 u 293 512 37 104.138 -295.23 2409.40
ntp2.ptb.de .PTB. 1 u 295 512 37 692.078 -584.47 793.515
|
Vollen Status erhält man mit
ntpq -c peer -c as -c rl
Code: |
remote refid st t when poll reach delay offset jitter
==============================================================================
*ptbtime1.ptb.de .PTB. 1 u 107 256 377 86.629 1.219 6.774
+ptbtime2.ptb.de .PPS. 1 u 52 512 377 81.760 -2.389 6.771
ind assID status conf reach auth condition last_event cnt
===========================================================
1 41036 9624 yes yes none sys.peer reachable 2
2 41037 9424 yes yes none candidat reachable 2
assID=0 status=0664 leap_none, sync_ntp, 6 events, event_peer/strat_chg,
version="ntpd 4.2.0a@1.1190-r Di Apr 18 15:41:29 CEST 2006 (1)"?,
processor="i686", system="Linux/2.6.16-gentoo-r7-md6-Axp", leap=00,
stratum=2, precision=-18, rootdelay=86.629, rootdispersion=25.534,
peer=41036, refid=192.53.103.107,
reftime=c81ec4a0.b6d490e6 Wed, May 24 2006 13:40:16.714, poll=9,
clock=0xc81ec60d.d7fd0d06, state=4, offset=-0.556, frequency=-50.461,
noise=677.008, jitter=7.807, stability=21.605
|
Und ins logfile schauen oder zur originalen Zeit .
mfg
Ma _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
-azuresky- n00b
Joined: 20 Oct 2004 Posts: 25 Location: germany (nds.)
|
Posted: Wed May 24, 2006 1:47 pm Post subject: |
|
|
ich hab grad ziemlich viel anderen kram zu tun, deshalb nur eine kurze status-meldung,
ohne selber jetzt viel weitergesucht zu haben:
Code: |
gurke tomsky # cat /etc/ntp.conf
#/etc/ntp.conf:
#logfile /var/log/ntp.log
server ptbtime1.ptb.de
server ptbtime2.ptb.de
driftfile /var/lib/ntp/ntp.drift
broadcastdelay 0.008
#restrict default ignore
restrict default notrust nomodify nopeer #(Marlo)
restrict 127.0.0.1
restrict ptbtime1.ptb.de
restrict ptbtime2.ptb.de
#restrict 192.168.178.0 mask 255.255.255.0 nomodify nopeer notrap
#restrict 192.168.178.0 mask 255.255.255.0 notrust nomodify notrap #(Marlo)
#end: /etc/ntp.conf
|
(ntp1.ptb.de == ptbtime1.ptb.de, ntp2.ptb.de == ptbtime2.ptb.de, hatte aber auch schon die anderen drin)
Code: |
gurke tomsky # ntpdate -d ptbtime1.ptb.de
24 May 15:40:11 ntpdate[7253]: ntpdate 4.2.0a@1.1199-r Wed May 24 02:42:10 CEST 2006 (1)
Looking for host ptbtime1.ptb.de and service ntp
host found : ptbtime1.ptb.de
transmit(192.53.103.103)
receive(192.53.103.103)
transmit(192.53.103.103)
receive(192.53.103.103)
transmit(192.53.103.103)
transmit(192.53.103.107)
receive(192.53.103.107)
transmit(192.53.103.107)
receive(192.53.103.103)
transmit(192.53.103.103)
receive(192.53.103.107)
transmit(192.53.103.107)
receive(192.53.103.103)
transmit(192.53.103.103)
receive(192.53.103.107)
transmit(192.53.103.107)
receive(192.53.103.107)
transmit(192.53.103.107)
server 192.53.103.103, port 123
stratum 1, precision -18, leap 00, trust 000
refid [PTB], delay 0.07727, dispersion 0.03154
transmitted 4, in filter 4
reference time: c81ee082.09ba24b1 Wed, May 24 2006 15:39:14.037
originate timestamp: c81ee0bc.7de9ead2 Wed, May 24 2006 15:40:12.491
transmit timestamp: c81ee0bc.5f129025 Wed, May 24 2006 15:40:12.371
filter delay: 0.12831 0.07727 0.24829 0.14638
0.00000 0.00000 0.00000 0.00000
filter offset: 0.050836 0.025829 0.110447 0.059731
0.000000 0.000000 0.000000 0.000000
delay 0.07727, dispersion 0.03154
offset 0.025829
server 192.53.103.107, port 123
stratum 1, precision -18, leap 00, trust 000
refid [PTB], delay 0.06598, dispersion 0.01945
transmitted 4, in filter 4
reference time: c81ee0a5.d995028a Wed, May 24 2006 15:39:49.849
originate timestamp: c81ee0bc.933dbae6 Wed, May 24 2006 15:40:12.575
transmit timestamp: c81ee0bc.8832fcac Wed, May 24 2006 15:40:12.532
filter delay: 0.20049 0.13327 0.08244 0.06598
0.00000 0.00000 0.00000 0.00000
filter offset: 0.087685 0.055895 0.028890 0.022753
0.000000 0.000000 0.000000 0.000000
delay 0.06598, dispersion 0.01945
offset 0.022753
24 May 15:40:12 ntpdate[7253]: adjust time server 192.53.103.107 offset 0.022753 sec
|
Code: |
gurke tomsky # ntpd -D 3 -u ntp:ntp
Debug1: 3 -> 3 = 3
ntpd 4.2.0a@1.1199-r Wed May 24 02:42:09 CEST 2006 (1)
Debug1: 3 -> 3 = 3
addto_syslog: ntpd 4.2.0a@1.1199-r Wed May 24 02:42:09 CEST 2006 (1)
addto_syslog: set_process_priority: Leave priority alone: priority_done is <2>
addto_syslog: precision = 1.000 usec
create_sockets(123)
addto_syslog: no IPv6 interfaces found
address_okay: listen Virtual: 1, IF name: lo, Up Flag: 1
address_okay: listen Virtual: 1, IF name: wlan0, Up Flag: 1
addto_syslog: bind() fd 4, family 2, port 123, addr 0.0.0.0, in_classd=0 flags=8 fails: Address already in use
addto_syslog: bind() fd 4, family 2, port 123, addr 127.0.0.1, in_classd=0 flags=0 fails: Address already in use
addto_syslog: bind() fd 4, family 2, port 123, addr 192.168.178.4, in_classd=0 flags=8 fails: Address already in use
create_sockets: ninterfaces=3
interface 0: fd=-1, bfd=-1, name=wildcard, flags=0x8, scope=0
sin=0.0.0.0 bcast=0.0.0.0, mask=255.255.255.255
interface 1: fd=-1, bfd=-1, name=lo, flags=0x5, scope=0
sin=127.0.0.1 mask=255.0.0.0
interface 2: fd=-1, bfd=-1, name=wlan0, flags=0x9, scope=0
sin=192.168.178.4 bcast=192.168.178.255, mask=255.255.255.0
init_io: maxactivefd 0
local_clock: time 0 clock 0.000000 offset 0.000000 freq 0.000 state 0
Debug2: 3 -> 3 = 3
getnetnum given ptbtime1.ptb.de, got 192.53.103.103
key_expire: at 0
peer_clear: at 0 assoc ID 38204 refid INIT
newpeer: 192.168.178.4->192.53.103.103 mode 3 vers 4 poll 6 10 flags 0x1 0x1 ttl 0 key 00000000
getnetnum given ptbtime2.ptb.de, got 192.53.103.104
key_expire: at 0
peer_clear: at 0 assoc ID 38205 refid INIT
newpeer: 192.168.178.4->192.53.103.104 mode 3 vers 4 poll 6 10 flags 0x1 0x1 ttl 0 key 00000000
addto_syslog: frequency initialized -100.110 PPM from /var/lib/ntp/ntp.drift
local_clock: time 0 clock 0.000000 offset 0.000000 freq -100.110 state 1
getnetnum given 127.0.0.1, got 127.0.0.1
getnetnum given ptbtime1.ptb.de, got 192.53.103.103
getnetnum given ptbtime2.ptb.de, got 192.53.103.104
authtrust: keyid 0000ffff life 1
report_event: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
addto_syslog: select(): nfound=-1, error: Interrupted system call
MCAST *****sendpkt(fd=-1 dst=192.53.103.103, src=192.168.178.4, ttl=0, len=48)
addto_syslog: sendto(192.53.103.103): Bad file descriptor
transmit: at 1 192.168.178.4->192.53.103.103 mode 3
poll_update: at 1 192.53.103.103 flags 0001 poll 6 burst 0 last 1 next 65
auth_agekeys: at 1 keys 1 expired 0
timer: refresh ts 0
addto_syslog: select(): nfound=-1, error: Interrupted system call
MCAST *****sendpkt(fd=-1 dst=192.53.103.104, src=192.168.178.4, ttl=0, len=48)
addto_syslog: sendto(192.53.103.104): Bad file descriptor
transmit: at 2 192.168.178.4->192.53.103.104 mode 3
poll_update: at 2 192.53.103.104 flags 0001 poll 6 burst 0 last 2 next 65
addto_syslog: select(): nfound=-1, error: Interrupted system call
addto_syslog: select(): nfound=-1, error: Interrupted system call
addto_syslog: select(): nfound=-1, error: Interrupted system call
addto_syslog: ntpd exiting on signal 2
|
Code: |
gurke tomsky # ntpq -c peer -c as -c rl
remote refid st t when poll reach delay offset jitter
==============================================================================
*ptbtime2.ptb.de .PPS. 1 u 113 256 363 103.589 56.958 21.950
ind assID status conf reach auth condition last_event cnt
===========================================================
1 8220 9624 yes yes none sys.peer reachable 2
assID=0 status=0664 leap_none, sync_ntp, 6 events, event_peer/strat_chg,
version="ntpd 4.2.0a@1.1199-r Wed May 24 02:42:09 CEST 2006 (1)"?,
processor="i686", system="Linux/2.6.16-gentoo-r7", leap=00, stratum=2,
precision=-20, rootdelay=103.589, rootdispersion=156.935, peer=8220,
refid=192.53.103.104,
reftime=c81edec6.90ca8198 Wed, May 24 2006 15:31:50.565, poll=8,
clock=0xc81edf37.4ea619da, state=4, offset=56.958, frequency=-99.961,
noise=29.497, jitter=21.950, stability=723.918
|
soweit erstmal
_________________ ...there's a mad sun burning on the azuresky
AthlonXP2000 auf AsusA7N8X(nonDelux) mit 512MB-DDR333
GeForce4MX440 AGP8x |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Wed May 24, 2006 3:09 pm Post subject: |
|
|
Na also es läuft- _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
-azuresky- n00b
Joined: 20 Oct 2004 Posts: 25 Location: germany (nds.)
|
Posted: Wed May 24, 2006 3:32 pm Post subject: [solved] NTPD: "nfound=-1, error: Interrupted system ca |
|
|
...joa...
Marlo wrote: | Na also es läuft- |
damit hab ich mich auch gerade mit abgefunden
die debuging nachrichten durch "-D" verwirrten mich nur sehr und sind wohl auch nicht für den end-user gedacht.
die option ist jetzt wieder rausgeflogen, zumal sie ja auch den ntpd im vordergrund laufen lies.
könnte diesbezüglich höchstens mal nen bug-report bei https://ntp.isc.org/bugs/index.cgi machen - oder auch nicht (?!?)
ja er läuft:
Code: |
gurke linux # ntpq -c peers
remote refid st t when poll reach delay offset jitter
==============================================================================
*ptbtime1.ptb.de .PTB. 1 u 11 64 377 44.669 10.337 117.747
+ptbtime2.ptb.de .PPS. 1 u 6 64 361 39.663 7.814 3.415
gurke log # tail -f ntp.log
May 24 17:13:10 gurke ntpd[8050]: ntpd 4.2.0a@1.1199-r Wed May 24 02:42:09 CEST 2006 (1)
May 24 17:13:10 gurke ntpd[8050]: precision = 1.000 usec
May 24 17:13:10 gurke ntpd[8050]: Listening on interface wildcard, 0.0.0.0#123
May 24 17:13:10 gurke ntpd[8050]: Listening on interface lo, 127.0.0.1#123
May 24 17:13:10 gurke ntpd[8050]: Listening on interface wlan0, 192.168.178.4#123
May 24 17:13:10 gurke ntpd[8050]: kernel time sync status 0040
May 24 17:13:10 gurke ntpd[8050]: frequency initialized -98.608 PPM from /var/lib/ntp/ntp.drift
May 24 17:16:21 gurke ntpd[8050]: synchronized to 192.53.103.103, stratum 1
May 24 17:17:25 gurke ntpd[8050]: kernel time sync disabled 0041
May 24 17:24:56 gurke ntpd[8050]: kernel time sync enabled 0001
|
bin mir aber sicher vorher überhaupt nix in /var/log/messages gehabt zu haben
(filterregeln für ntpd nebst logfile /var/log/ntpd.log sind jetzt neu dazugekommen)
hatte bei dem ganzen rumprobieren auch immer /etc/init.d/ntpd-client am laufen - jetzt gerade nicht.
mal sehen, ob's daran lag. nun hab ich ja eine funktionierende basis.
vielen dank dir Marlo
_________________ ...there's a mad sun burning on the azuresky
AthlonXP2000 auf AsusA7N8X(nonDelux) mit 512MB-DDR333
GeForce4MX440 AGP8x |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|