View previous topic :: View next topic |
Author |
Message |
Deus Ex Guru
Joined: 16 Nov 2005 Posts: 489 Location: Patavium
|
Posted: Sat Jun 17, 2006 9:32 am Post subject: [Risolto] Portage 2.1.1_pre1 |
|
|
Sembra che questa versione di Portage (ovviamente in ~) abbia qualche problemino, persino a riemergere se stesso, dando questo tipo di errore
Code: | emerge portage
Calculating dependencies... done!
>>> Emerging (1 of 1) sys-apps/portage-2.1.1_pre1 to /
>>> checking ebuild checksums ;-)
>>> checking auxfile checksums ;-)
>>> checking miscfile checksums ;-)
>>> checking portage-2.1.1_pre1.tar.bz2 ;-)
* Your CFLAGS contain(s) "-fPIC" which can break packages.
* Your CXXFLAGS contain(s) "-fPIC" which can break packages.
*
* Before you file a bug please remove these flags and
* re-compile the package in question as well as all its dependencies
>>> Unpacking source...
>>> Unpacking portage-2.1.1_pre1.tar.bz2 to /var/tmp/portage/portage-2.1.1_pre1/work
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/portage-2.1.1_pre1/work/portage-2.1.1_pre1 ...
>>> Source compiled.
>>> Test phase [not enabled]: sys-apps/portage-2.1.1_pre1
>>> Install portage-2.1.1_pre1 into /var/tmp/portage/portage-2.1.1_pre1/image/ category sys-apps
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 81: doins: command not found
patching file make.conf
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 85: newins: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 100: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 107: doexe: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 108: doexe: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 109: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 112: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 115: doins: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 112: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 115: doins: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 112: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 115: doins: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 118: doman: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 123: dodoc: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 124: dodoc: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 125: dodoc: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 127: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 129: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 129: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 129: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 129: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 129: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 129: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 132: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 144: dosym: command not found
/usr/portage/sys-apps/portage/portage-2.1.1_pre1.ebuild: line 147: dodir: command not found
/usr/lib/portage/bin/ebuild.sh: line 331: dodir: command not found
touch: cannot touch `/var/tmp/portage/portage-2.1.1_pre1/image///etc/portage/.keep': No such file or directory
!!! ERROR: sys-apps/portage-2.1.1_pre1 failed.
Call stack:
ebuild.sh, line 1540: Called dyn_install
ebuild.sh, line 1014: Called src_install
portage-2.1.1_pre1.ebuild, line 148: Called keepdir '/etc/portage'
ebuild.sh, line 338: Called die
!!! Failed to create .keep in /var/tmp/portage/portage-2.1.1_pre1/image///etc/portage |
Da notare che per _qualsiasi_ pacchetto dà errori simili (dove non manca dosym o dodir, infatti, non c'è emake, etc).
Ora, per tornare indietro allo stabile 2.1, devo scaricarmi uno snapshot, giusto? _________________ Deus Ex
--
L’inflazione che caccia nelle mani dell’individuo, in un gesto solo, miliardi di marchi, lasciandolo più miserabile di prima, dimostra punto per punto che il denaro è un’allucinazione collettiva.
Last edited by Deus Ex on Sat Jun 17, 2006 11:58 am; edited 1 time in total |
|
Back to top |
|
|
Luca89 Advocate
Joined: 27 Apr 2005 Posts: 2107 Location: Agrigento (Italy)
|
Posted: Sat Jun 17, 2006 9:35 am Post subject: Re: Portage 2.1.1_pre1 |
|
|
Deus Ex wrote: | Ora, per tornare indietro allo stabile 2.1, devo scaricarmi uno snapshot, giusto? |
Penso proprio di si, inoltre se apri un bug sul bugzilla, faresti sicuramente una cosa gradita agli sviluppatori e alla comunità . _________________ Running Fast! |
|
Back to top |
|
|
Deus Ex Guru
Joined: 16 Nov 2005 Posts: 489 Location: Patavium
|
Posted: Sat Jun 17, 2006 9:40 am Post subject: Re: Portage 2.1.1_pre1 |
|
|
Luca89 wrote: | inoltre se apri un bug sul bugzilla, faresti sicuramente una cosa gradita agli sviluppatori e alla comunità . |
Già, era proprio quello che intendevo fare
Thanks
EDIT: No, niente da fare: ho scaricato e decompresso due snapshot differenti per data, e in entrambi i casi l'errore era lo stesso. La versione 2.1.1_pre1 ha proprio sballato tutto. Come diavolo fare ora? _________________ Deus Ex
--
L’inflazione che caccia nelle mani dell’individuo, in un gesto solo, miliardi di marchi, lasciandolo più miserabile di prima, dimostra punto per punto che il denaro è un’allucinazione collettiva. |
|
Back to top |
|
|
ProT-0-TypE Veteran
Joined: 20 Dec 2003 Posts: 1624 Location: Cagliari
|
Posted: Sat Jun 17, 2006 10:21 am Post subject: |
|
|
Ho anche io quella versione, ma non ho nessun problema (fin'ora..)
Ah, prima di segnalare il bug:
Quote: | >>> checking portage-2.1.1_pre1.tar.bz2
* Your CFLAGS contain(s) "-fPIC" which can break packages.
* Your CXXFLAGS contain(s) "-fPIC" which can break packages.
*
* Before you file a bug please remove these flags and
* re-compile the package in question as well as all its dependencies |
_________________ [Vuoi guadagnare navigando?] |
|
Back to top |
|
|
Deus Ex Guru
Joined: 16 Nov 2005 Posts: 489 Location: Patavium
|
Posted: Sat Jun 17, 2006 10:25 am Post subject: |
|
|
Beato te. Io non riesco a capire coma diavolo ha fatto a smazzare tutto. Il problema è che non trova per nulla i comandi di portage (come ho detto prima) tipo emake, dodir, dosym, etc, ma in /usr/lib/portage/bin/ ci sono!!
E la cosa assurda è che scompattando lo snapshot non è cambiato nulla.
Suggerimenti?
EDIT: Ok, il problema era nel file ebuild.sh del pacchetto di portage. Ho risolto scompattando quello del 2.1 stabile, prelevato "di peso" il file e copiato in /usr/lib/portage/bin/. Non è una soluzione elegante, ma onestamente non riuscivo a vedere altre soluzioni.
EDIT: che pirla che sono! Il problema sta nel fatto che sto usando il bashrc-ng di Ferdinando, in quanto, come ha detto Ferdinando stesso
Ferdinando wrote: |
è che ora portage imposta un suo $PATH e quindi il bashrc non dovrebbe metterci le mani; |
Problema risolto quindi con la versione 0.8 di bashrc-ng, senza dover fare tutto quel lavorio che ho detto prima.
Chiedo scusa per la svista clamorosa. _________________ Deus Ex
--
L’inflazione che caccia nelle mani dell’individuo, in un gesto solo, miliardi di marchi, lasciandolo più miserabile di prima, dimostra punto per punto che il denaro è un’allucinazione collettiva. |
|
Back to top |
|
|
otaku Guru
Joined: 16 Dec 2004 Posts: 428 Location: Rho (MI)
|
Posted: Sat Jun 24, 2006 11:52 am Post subject: |
|
|
Volevo segnalare che ora il problema potrebbe ripresentarsi ai più visto che questa versione di portage è marcata stabile.
lavish wrote: | Otaku_: devo cazziarti |
questo post è giusto per evitare ulteriori cazziate dai MOD.
ciao a tutti e buon wek end. _________________ Ventiquattr'ore al giorno in preda a una follia contorta... |
|
Back to top |
|
|
lavish Bodhisattva
Joined: 13 Sep 2004 Posts: 4296
|
Posted: Sat Jun 24, 2006 11:57 am Post subject: |
|
|
otaku wrote: | lavish wrote: | Otaku_: devo cazziarti |
|
Ehm, ci tengo a sottolineare che il tono era scherzoso, non vorrei passare per un nazi eheheheh
(era stato aperto un thread simile a questo che poi otaku ha provveduto a cancellare per postare in coda qui)
Ciao _________________ minimalblue.com | secgroup.github.io/ |
|
Back to top |
|
|
Raffo Veteran
Joined: 23 Apr 2004 Posts: 1019 Location: Berlin
|
Posted: Mon Jun 26, 2006 10:48 am Post subject: |
|
|
Come scritto in un altro topic, ho avuto un problema simile al tuo. Il punto è che io non ho più bashrc-ng attivo, lo disattivai parecchio tempo fa. Ora, mi sapresti dire cosa hai dovuto modificare così che ci metta mano anch'io? (per un controllo)
Grazie
EDIT: @Deux Ex: ho avuto proprio ora lo stesso problema nella compilazione di dbus... |
|
Back to top |
|
|
bandreabis Advocate
Joined: 18 Feb 2005 Posts: 2490 Location: イタリアのロディで
|
Posted: Fri Jun 30, 2006 5:01 pm Post subject: |
|
|
Stessa cosa per me! Ha funzionato portage-bashrc ieri, oggi ho sto problema.
Ho disinstallato portage-bashrc di fonderia ma non riesco a risolvere, e emerge portage e bashrc-ng non vanno.
Cosa posso fare?
Help!
EDIT: risolto eliminando /etc/portage/bashrc _________________ Il numero di post non fa di me un esperto! Anzi! |
|
Back to top |
|
|
.:chrome:. Advocate
Joined: 19 Feb 2005 Posts: 4588 Location: Brescia, Italy
|
Posted: Fri Jun 30, 2006 5:05 pm Post subject: |
|
|
hai rimosso il file bashrc da /etc/portage? |
|
Back to top |
|
|
bandreabis Advocate
Joined: 18 Feb 2005 Posts: 2490 Location: イタリアのロディで
|
Posted: Fri Jun 30, 2006 5:06 pm Post subject: |
|
|
Caccio se ero un 5 secondi meno pirla...
Scusami. _________________ Il numero di post non fa di me un esperto! Anzi! |
|
Back to top |
|
|
Deus Ex Guru
Joined: 16 Nov 2005 Posts: 489 Location: Patavium
|
Posted: Fri Jun 30, 2006 5:29 pm Post subject: |
|
|
@Raffo: solo ora ho visto il tuo messaggio! La cosa migliore che puoi fare è eliminare bashrc da /etc/portage e usare l'ebuild di Ferdinando (che trovi nella sezione tools del nostro forum), cosicchè hai la versione aggiornata di bashrc.
Tutto questo, of course, se non hai già sistemato prima _________________ Deus Ex
--
L’inflazione che caccia nelle mani dell’individuo, in un gesto solo, miliardi di marchi, lasciandolo più miserabile di prima, dimostra punto per punto che il denaro è un’allucinazione collettiva. |
|
Back to top |
|
|
|