| View previous topic :: View next topic |
| Author |
Message |
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
 Posted: Thu Aug 24, 2006 9:42 pm Post subject: System hängt sich zwischen Starting local und dem Login auf |
 |
|
So denn, ich bin jetzt kurtz vor dem verzweifeln.
Ich nutze ein System mit einem 2.6.17-R4 Kernel ... läuft schon ein paar Wochen ziemlich stabil, aber bin wohl noch immer ein bißchen am Einrichten. Hab heute allerdings nichts installiert, nur CUPS konfiguriert zum Drucken auf einem SMB-Share. Alles lief wie immer perfekt, nur dass das System jetzt nicht mehr startet. Es hängt sich komplett an der Stelle auf, wo eigentlich das Login kommen sollte. Hab jetzt nur per Boot-CD gestartet, die Log-files durchgeschaut und die Platten gecheckt. Aber nirgendwo ein fehler zu finden.
Hat irgendjemand eine Idee? |
|
| Back to top |
|
 |
smg
Veteran
Joined: 13 Aug 2004
Posts: 1402
Location: /home/stephan
|
| Posted: Thu Aug 24, 2006 9:44 pm Post subject: Re: System hängt sich zwischen Starting local und dem Login |
|
|
| goha wrote: | So denn, ich bin jetzt kurtz vor dem verzweifeln.
Ich nutze ein System mit einem 2.6.17-R4 Kernel ... läuft schon ein paar Wochen ziemlich stabil, aber bin wohl noch immer ein bißchen am Einrichten. Hab heute allerdings nichts installiert, nur CUPS konfiguriert zum Drucken auf einem SMB-Share. Alles lief wie immer perfekt, nur dass das System jetzt nicht mehr startet. Es hängt sich komplett an der Stelle auf, wo eigentlich das Login kommen sollte. Hab jetzt nur per Boot-CD gestartet, die Log-files durchgeschaut und die Platten gecheckt. Aber nirgendwo ein fehler zu finden.
Hat irgendjemand eine Idee? |
Sicher, dass du nicht was anderes noch gemacht hast? Nen Hardlock ist sehr seltsam... Kannst du mal die logs irgendwie beischaffen? Also von /var/log/messages und dem letzen dmesg evt. und emerge logs?
bye.
_________________
GnuPG-Key-ID: 0xF8C275D4
Fingerprint: 5B6F 134A 189B A24D 342B 0961 8D4B 0230 F8C2 75D4
| Code: | | perl -WTe '($")=$/;print qq(@{[reverse('0'..'100')]}$/BOOM!$/);' |
|
|
| Back to top |
|
|
Finswimmer
Bodhisattva
Joined: 02 Sep 2004
Posts: 5467
Location: Langen (Hessen), Germany
|
| Posted: Thu Aug 24, 2006 9:44 pm Post subject: |
|
|
Was ist in local.start?
Nimm das und xdm mal raus. Starte, schau, ob es geht und starte dann beide Scripte einzeln.
Tobi |
|
| Back to top |
|
|
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
| Posted: Thu Aug 24, 2006 10:14 pm Post subject: |
|
|
| Finswimmer wrote: | Was ist in local.start?
Nimm das und xdm mal raus. Starte, schau, ob es geht und starte dann beide Scripte einzeln.
Tobi |
die local.start enthält bei mir quasi nix, ich starte noch nichts automatisch
MESSAGES
| Quote: |
Aug 24 21:58:58 Satellit syslog-ng[3551]: syslog-ng version 1.6.9 starting
Aug 24 21:58:58 Satellit syslog-ng[3551]: Changing permissions on special file /dev/tty12
Aug 24 21:58:58 Satellit Linux version 2.6.17-gentoo-r4 (root@Satellit) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #15 Mon Aug 14 10:49:13 CEST 2006
Aug 24 21:58:58 Satellit BIOS-provided physical RAM map:
Aug 24 21:58:58 Satellit BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Aug 24 21:58:58 Satellit BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Aug 24 21:58:58 Satellit BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
Aug 24 21:58:58 Satellit BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Aug 24 21:58:58 Satellit BIOS-e820: 0000000000100000 - 000000000f6f0000 (usable)
Aug 24 21:58:58 Satellit BIOS-e820: 000000000f6f0000 - 000000000f6ff000 (ACPI data)
Aug 24 21:58:58 Satellit BIOS-e820: 000000000f6ff000 - 000000000f700000 (ACPI NVS)
Aug 24 21:58:58 Satellit BIOS-e820: 000000000f700000 - 000000000f800000 (usable)
Aug 24 21:58:58 Satellit BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Aug 24 21:58:58 Satellit 248MB LOWMEM available.
Aug 24 21:58:58 Satellit On node 0 totalpages: 63488
Aug 24 21:58:58 Satellit DMA zone: 4096 pages, LIFO batch:0
Aug 24 21:58:58 Satellit Normal zone: 59392 pages, LIFO batch:15
Aug 24 21:58:58 Satellit DMI 2.3 present.
Aug 24 21:58:58 Satellit ACPI: RSDP (v000 PTLTD ) @ 0x000f72b0
Aug 24 21:58:58 Satellit ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0f6fbfe4
Aug 24 21:58:58 Satellit ACPI: FADT (v001 VT8606 twisterT 0x06040000 PTL_ 0x000f4240) @ 0x0f6fef8c
Aug 24 21:58:58 Satellit ACPI: DSDT (v001 COMPAL CY23 0x06040000 MSFT 0x0100000d) @ 0x00000000
Aug 24 21:58:58 Satellit ACPI: PM-Timer IO Port: 0x8008
Aug 24 21:58:58 Satellit Allocating PCI resources starting at 10000000 (gap: 0f800000:f0780000)
Aug 24 21:58:58 Satellit Built 1 zonelists
Aug 24 21:58:58 Satellit Kernel command line: video=vesafb:mtrr=2,ywrap,1024x768-24@60 root=/dev/hda3
Aug 24 21:58:58 Satellit Local APIC disabled by BIOS -- you can enable it with "lapic"
Aug 24 21:58:58 Satellit mapped APIC to ffffd000 (011f1000)
Aug 24 21:58:58 Satellit Enabling fast FPU save and restore... done.
Aug 24 21:58:58 Satellit Enabling unmasked SIMD FPU exception support... done.
Aug 24 21:58:58 Satellit Initializing CPU#0
Aug 24 21:58:58 Satellit PID hash table entries: 1024 (order: 10, 4096 bytes)
Aug 24 21:58:58 Satellit Detected 1194.309 MHz processor.
Aug 24 21:58:58 Satellit Using pmtmr for high-res timesource
Aug 24 21:58:58 Satellit Console: colour VGA+ 80x25
Aug 24 21:58:58 Satellit Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 24 21:58:58 Satellit Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Aug 24 21:58:58 Satellit Memory: 247132k/253952k available (2216k kernel code, 6076k reserved, 883k data, 156k init, 0k highmem)
Aug 24 21:58:58 Satellit Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 24 21:58:58 Satellit Calibrating delay using timer specific routine.. 2389.00 BogoMIPS (lpj=1194500)
Aug 24 21:58:58 Satellit Mount-cache hash table entries: 512
Aug 24 21:58:58 Satellit CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Aug 24 21:58:58 Satellit CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Aug 24 21:58:58 Satellit CPU: L1 I cache: 16K, L1 D cache: 16K
Aug 24 21:58:58 Satellit CPU: L2 cache: 256K
Aug 24 21:58:58 Satellit CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Aug 24 21:58:58 Satellit Intel machine check architecture supported.
Aug 24 21:58:58 Satellit Intel machine check reporting enabled on CPU#0.
Aug 24 21:58:58 Satellit CPU: Intel(R) Pentium(R) III CPU 1200MHz stepping 01
Aug 24 21:58:58 Satellit Checking 'hlt' instruction... OK.
Aug 24 21:58:58 Satellit SMP alternatives: switching to UP code
Aug 24 21:58:58 Satellit Freeing SMP alternatives: 0k freed
Aug 24 21:58:58 Satellit ACPI: setting ELCR to 0200 (from 0c20)
Aug 24 21:58:58 Satellit Unpacking initramfs... done
Aug 24 21:58:58 Satellit Freeing initrd memory: 385k freed
Aug 24 21:58:58 Satellit NET: Registered protocol family 16
Aug 24 21:58:58 Satellit ACPI: bus type pci registered
Aug 24 21:58:58 Satellit PCI: PCI BIOS revision 2.10 entry at 0xfd80e, last bus=1
Aug 24 21:58:58 Satellit Setting up standard PCI resources
Aug 24 21:58:58 Satellit ACPI: Subsystem revision 20060127
Aug 24 21:58:58 Satellit ACPI: Interpreter enabled
Aug 24 21:58:58 Satellit ACPI: Using PIC for interrupt routing
Aug 24 21:58:58 Satellit ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 24 21:58:58 Satellit PCI: Probing PCI hardware (bus 00)
Aug 24 21:58:58 Satellit PCI quirk: region 8100-810f claimed by vt82c686 SMB
Aug 24 21:58:58 Satellit Boot video device is 0000:01:00.0
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 24 21:58:58 Satellit ACPI: Embedded Controller [EC0] (gpe 6) interrupt mode.
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKC] (IRQs *5 9 10 11)
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
Aug 24 21:58:58 Satellit SCSI subsystem initialized
Aug 24 21:58:58 Satellit usbcore: registered new driver usbfs
Aug 24 21:58:58 Satellit usbcore: registered new driver hub
Aug 24 21:58:58 Satellit PCI: Using ACPI for IRQ routing
Aug 24 21:58:58 Satellit PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 24 21:58:58 Satellit PCI: Bridge: 0000:00:01.0
Aug 24 21:58:58 Satellit IO window: disabled.
Aug 24 21:58:58 Satellit MEM window: e8100000-e81fffff
Aug 24 21:58:58 Satellit PREFETCH window: f0000000-f7ffffff
Aug 24 21:58:58 Satellit PCI: Bus 2, cardbus bridge: 0000:00:04.0
Aug 24 21:58:58 Satellit IO window: 00002000-000020ff
Aug 24 21:58:58 Satellit IO window: 00002400-000024ff
Aug 24 21:58:58 Satellit PREFETCH window: 10000000-11ffffff
Aug 24 21:58:58 Satellit MEM window: 12000000-13ffffff
Aug 24 21:58:58 Satellit PCI: Bus 6, cardbus bridge: 0000:00:04.1
Aug 24 21:58:58 Satellit IO window: 00002800-000028ff
Aug 24 21:58:58 Satellit IO window: 00002c00-00002cff
Aug 24 21:58:58 Satellit PREFETCH window: 14000000-15ffffff
Aug 24 21:58:58 Satellit MEM window: 16000000-17ffffff
Aug 24 21:58:58 Satellit PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Aug 24 21:58:58 Satellit PCI: setting IRQ 10 as level-triggered
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Aug 24 21:58:58 Satellit PCI: setting IRQ 11 as level-triggered
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Aug 24 21:58:58 Satellit NET: Registered protocol family 2
Aug 24 21:58:58 Satellit IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Aug 24 21:58:58 Satellit TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Aug 24 21:58:58 Satellit TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Aug 24 21:58:58 Satellit TCP: Hash tables configured (established 8192 bind 4096)
Aug 24 21:58:58 Satellit TCP reno registered
Aug 24 21:58:58 Satellit audit: initializing netlink socket (disabled)
Aug 24 21:58:58 Satellit audit(1156456718.558:1): initialized
Aug 24 21:58:58 Satellit NTFS driver 2.1.27 [Flags: R/O].
Aug 24 21:58:58 Satellit Initializing Cryptographic API
Aug 24 21:58:58 Satellit io scheduler noop registered
Aug 24 21:58:58 Satellit io scheduler cfq registered (default)
Aug 24 21:58:58 Satellit PCI: Disabling Via external APIC routing
Aug 24 21:58:58 Satellit lp: driver loaded but no devices found
Aug 24 21:58:58 Satellit Linux agpgart interface v0.101 (c) Dave Jones
Aug 24 21:58:58 Satellit agpgart: Detected VIA ProSavage PM133/PL133/PN133 chipset
Aug 24 21:58:58 Satellit agpgart: AGP aperture is 64M @ 0xec000000
Aug 24 21:58:58 Satellit [drm] Initialized drm 1.0.1 20051102
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Aug 24 21:58:58 Satellit [drm] Initialized savage 2.4.1 20050313 on minor 0
Aug 24 21:58:58 Satellit vesafb: unrecognized option mtrr=2
Aug 24 21:58:58 Satellit vesafb: S3 Incorporated., VBE 2.0, Rev 1.1 (OEM: S3 Incorporated. Twister BIOS)
Aug 24 21:58:58 Satellit vesafb: VBE version: 2.0
Aug 24 21:58:58 Satellit vesafb: protected mode interface info at c000:7ef1
Aug 24 21:58:58 Satellit vesafb: pmi: set display start = c00c7f7b, set palette = c00c7fc4
Aug 24 21:58:58 Satellit vesafb: no monitor limits have been set
Aug 24 21:58:58 Satellit vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1776
Aug 24 21:58:58 Satellit Console: switching to colour frame buffer device 128x48
Aug 24 21:58:58 Satellit vesafb: framebuffer at 0xf0000000, mapped to 0xd0080000, using 7104k, total 7104k
Aug 24 21:58:58 Satellit fb0: VESA VGA frame buffer device
Aug 24 21:58:58 Satellit ACPI: AC Adapter [ACAD] (on-line)
Aug 24 21:58:58 Satellit ACPI: Battery Slot [BAT1] (battery present)
Aug 24 21:58:58 Satellit ACPI: CPU0 (power states: C1[C1] C2[C2])
Aug 24 21:58:58 Satellit ACPI: Processor [CPU0] (supports 16 throttling states)
Aug 24 21:58:58 Satellit ACPI: Thermal Zone [THRM] (37 C)
Aug 24 21:58:58 Satellit Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Aug 24 21:58:58 Satellit parport_pc: VIA 686A/8231 detected
Aug 24 21:58:58 Satellit parport_pc: probing current configuration
Aug 24 21:58:58 Satellit parport_pc: Current parallel port base: 0x378
Aug 24 21:58:58 Satellit parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Aug 24 21:58:58 Satellit lp0: using parport0 (interrupt-driven).
Aug 24 21:58:58 Satellit parport_pc: VIA parallel port: io=0x378, irq=7
Aug 24 21:58:58 Satellit serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 24 21:58:58 Satellit serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 24 21:58:58 Satellit mice: PS/2 mouse device common for all mice
Aug 24 21:58:58 Satellit input: PC Speaker as /class/input/input0
Aug 24 21:58:58 Satellit input: AT Translated Set 2 keyboard as /class/input/input1
Aug 24 21:58:58 Satellit Floppy drive(s): fd0 is 1.44M
Aug 24 21:58:58 Satellit FDC 0 is a post-1991 82077
Aug 24 21:58:58 Satellit loop: loaded (max 8 devices)
Aug 24 21:58:58 Satellit usbcore: registered new driver ub
Aug 24 21:58:58 Satellit Linux Tulip driver version 1.1.13 (May 11, 2002)
Aug 24 21:58:58 Satellit PCI: Enabling device 0000:00:11.0 (0012 -> 0013)
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Aug 24 21:58:58 Satellit tulip0: MII transceiver #1 config 1000 status 7849 advertising 05e1.
Aug 24 21:58:58 Satellit tulip0: MII transceiver #2 config 1000 status 7849 advertising 05e1.
Aug 24 21:58:58 Satellit tulip0: MII transceiver #3 config 1000 status 7849 advertising 05e1.
Aug 24 21:58:58 Satellit tulip0: MII transceiver #4 config 1000 status 7849 advertising 05e1.
Aug 24 21:58:58 Satellit eth0: ADMtek Comet rev 17 at 00011c00, 00:90:96:1F:A6:96, IRQ 11.
Aug 24 21:58:58 Satellit Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 24 21:58:58 Satellit ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 24 21:58:58 Satellit VP_IDE: IDE controller at PCI slot 0000:00:07.1
Aug 24 21:58:58 Satellit VP_IDE: chipset revision 6
Aug 24 21:58:58 Satellit VP_IDE: not 100% native mode: will probe irqs later
Aug 24 21:58:58 Satellit VP_IDE: VIA vt82c686b (rev 42) IDE UDMA100 controller on pci0000:00:07.1
Aug 24 21:58:58 Satellit ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
Aug 24 21:58:58 Satellit ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
Aug 24 21:58:58 Satellit Probing IDE interface ide0...
Aug 24 21:58:58 Satellit input: PS/2 Mouse as /class/input/input2
Aug 24 21:58:58 Satellit hda: IC25N020ATDA04-0, ATA DISK drive
Aug 24 21:58:58 Satellit input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
Aug 24 21:58:58 Satellit ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 24 21:58:58 Satellit Probing IDE interface ide1...
Aug 24 21:58:58 Satellit hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
Aug 24 21:58:58 Satellit ide1 at 0x170-0x177,0x376 on irq 15
Aug 24 21:58:58 Satellit hda: max request size: 128KiB
Aug 24 21:58:58 Satellit hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
Aug 24 21:58:58 Satellit hda: cache flushes not supported
Aug 24 21:58:58 Satellit hda: hda1 hda2 hda3
Aug 24 21:58:58 Satellit hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Aug 24 21:58:58 Satellit Uniform CD-ROM driver Revision: 3.20
Aug 24 21:58:58 Satellit PCI: Enabling device 0000:00:0d.0 (0010 -> 0012)
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Aug 24 21:58:58 Satellit PCI: setting IRQ 5 as level-triggered
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
Aug 24 21:58:58 Satellit ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[e8004000-e80047ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 24 21:58:58 Satellit USB Universal Host Controller Interface driver v3.0
Aug 24 21:58:58 Satellit PCI: Enabling device 0000:00:07.2 (0010 -> 0011)
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Aug 24 21:58:58 Satellit uhci_hcd 0000:00:07.2: UHCI Host Controller
Aug 24 21:58:58 Satellit uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Aug 24 21:58:58 Satellit uhci_hcd 0000:00:07.2: irq 11, io base 0x00001020
Aug 24 21:58:58 Satellit usb usb1: configuration #1 chosen from 1 choice
Aug 24 21:58:58 Satellit hub 1-0:1.0: USB hub found
Aug 24 21:58:58 Satellit hub 1-0:1.0: 2 ports detected
Aug 24 21:58:58 Satellit usbcore: registered new driver usblp
Aug 24 21:58:58 Satellit drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Aug 24 21:58:58 Satellit Initializing USB Mass Storage driver...
Aug 24 21:58:58 Satellit usbcore: registered new driver usb-storage
Aug 24 21:58:58 Satellit USB Mass Storage support registered.
Aug 24 21:58:58 Satellit usbcore: registered new driver hiddev
Aug 24 21:58:58 Satellit usbcore: registered new driver usbhid
Aug 24 21:58:58 Satellit drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Aug 24 21:58:58 Satellit vt596_smbus 0000:00:07.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1
Aug 24 21:58:58 Satellit Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
Aug 24 21:58:58 Satellit ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
Aug 24 21:58:58 Satellit PCI: Setting latency timer of device 0000:00:07.5 to 64
Aug 24 21:58:58 Satellit ALSA device list:
Aug 24 21:58:58 Satellit #0: VIA 82C686A/B rev50 with CS4299 at 0x1400, irq 5
Aug 24 21:58:58 Satellit TCP bic registered
Aug 24 21:58:58 Satellit Initializing IPsec netlink socket
Aug 24 21:58:58 Satellit NET: Registered protocol family 1
Aug 24 21:58:58 Satellit NET: Registered protocol family 17
Aug 24 21:58:58 Satellit NET: Registered protocol family 15
Aug 24 21:58:58 Satellit Using IPI Shortcut mode
Aug 24 21:58:58 Satellit ACPI wakeup devices:
Aug 24 21:58:58 Satellit PWBN USB0 MIN0 MIN1
Aug 24 21:58:58 Satellit ACPI: (supports S0 S1 S3 S4 S5)
Aug 24 21:58:58 Satellit ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f1b13009a9f]
Aug 24 21:58:58 Satellit kjournald starting. Commit interval 5 seconds
Aug 24 21:58:58 Satellit EXT3-fs: mounted filesystem with ordered data mode.
Aug 24 21:58:58 Satellit VFS: Mounted root (ext3 filesystem) readonly.
Aug 24 21:58:58 Satellit Freeing unused kernel memory: 156k freed
Aug 24 21:58:58 Satellit EXT3 FS on hda3, internal journal
Aug 24 21:58:58 Satellit ZD1211B - http://zd1211.ath.cx/ - r80
Aug 24 21:58:58 Satellit Based on www.zydas.com.tw driver version 2.5.0.0
Aug 24 21:58:58 Satellit usbcore: registered new driver zd1211b
Aug 24 21:58:58 Satellit vmmon: module license 'unspecified' taints kernel.
Aug 24 21:58:58 Satellit /dev/vmmon[1894]: Module vmmon: registered with major=10 minor=165
Aug 24 21:58:58 Satellit /dev/vmmon[1894]: Module vmmon: initialized
Aug 24 21:58:58 Satellit Adding 506036k swap on /dev/hda2. Priority:-1 extents:1 across:506036k
|
DMESG
| Quote: |
Linux version 2.6.17-gentoo-r4 (root@Satellit) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #15 Mon Aug 14 10:49:13 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f6f0000 (usable)
BIOS-e820: 000000000f6f0000 - 000000000f6ff000 (ACPI data)
BIOS-e820: 000000000f6ff000 - 000000000f700000 (ACPI NVS)
BIOS-e820: 000000000f700000 - 000000000f800000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
248MB LOWMEM available.
On node 0 totalpages: 63488
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 59392 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f72b0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0f6fbfe4
ACPI: FADT (v001 VT8606 twisterT 0x06040000 PTL_ 0x000f4240) @ 0x0f6fef8c
ACPI: DSDT (v001 COMPAL CY23 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 10000000 (gap: 0f800000:f0780000)
Built 1 zonelists
Kernel command line: video=vesafb:mtrr=2,ywrap,1024x768-24@60 root=/dev/hda3
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011f1000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 1193.830 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 247132k/253952k available (2216k kernel code, 6076k reserved, 883k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2388.92 BogoMIPS (lpj=1194464)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) III CPU 1200MHz stepping 01
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
ACPI: setting ELCR to 0200 (from 0c20)
Unpacking initramfs... done
Freeing initrd memory: 385k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd80e, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 8100-810f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 6) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e8100000-e81fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:04.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 10000000-11ffffff
MEM window: 12000000-13ffffff
PCI: Bus 6, cardbus bridge: 0000:00:04.1
IO window: 00002800-000028ff
IO window: 00002c00-00002cff
PREFETCH window: 14000000-15ffffff
MEM window: 16000000-17ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1156461869.486:1): initialized
NTFS driver 2.1.27 [Flags: R/O].
Initializing Cryptographic API
io scheduler noop registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA ProSavage PM133/PL133/PN133 chipset
agpgart: AGP aperture is 64M @ 0xec000000
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized savage 2.4.1 20050313 on minor 0
vesafb: unrecognized option mtrr=2
vesafb: S3 Incorporated., VBE 2.0, Rev 1.1 (OEM: S3 Incorporated. Twister BIOS)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:7ef1
vesafb: pmi: set display start = c00c7f7b, set palette = c00c7fc4
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1776
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0xf0000000, mapped to 0xd0080000, using 7104k, total 7104k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
ACPI: Thermal Zone [THRM] (37 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
usbcore: registered new driver ub
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Enabling device 0000:00:11.0 (0012 -> 0013)
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
tulip0: MII transceiver #2 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #3 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #4 config 1000 status 786d advertising 05e1.
eth0: ADMtek Comet rev 17 at 00011c00, 00:90:96:1F:A6:96, IRQ 11.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 42) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: PS/2 Mouse as /class/input/input2
hda: IC25N020ATDA04-0, ATA DISK drive
input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PCI: Enabling device 0000:00:0d.0 (0010 -> 0012)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[e8004000-e80047ff] Max Packet=[2048] IR/IT contexts=[4/8]
USB Universal Host Controller Interface driver v3.0
PCI: Enabling device 0000:00:07.2 (0010 -> 0011)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new low speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Trackball as /class/input/input4
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:07.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
vt596_smbus 0000:00:07.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1
Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f1b13009a9f]
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:07.5 to 64
ALSA device list:
#0: VIA 82C686A/B rev50 with CS4299 at 0x1400, irq 5
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
ACPI wakeup devices:
PWBN USB0 MIN0 MIN1
ACPI: (supports S0 S1 S3 S4 S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 156k freed
EXT3 FS on hda3, internal journal
ZD1211B - http://zd1211.ath.cx/ - r80
Based on www.zydas.com.tw driver version 2.5.0.0
usb 1-1: reset full speed USB device using uhci_hcd and address 2
Release Ver = 4810
zd1211:bulk out: wMaxPacketSize = 40
zd1211:bulk in: wMaxPacketSize = 40
zd1211:interrupt in: wMaxPacketSize = 40
zd1211:interrupt in: int_interval = 1
zd1211:bulk out: wMaxPacketSize = 40
EEPORM Ver = 4810
zd1211:USB Download Boot code success
zd1211:MAC address = 00:0e:8e:08:ff:88
zd1211:AddrEntryTable = f7c6
zd1211:RF_Mode = 80000084
PA type: 0
Airoha AL2230S_RF
zd1211:Pure B-Mode
zd1211:AllowedChannel = 000007ff
zd1211:LinkLEDn = 200
AllowedChannel = 000107ff
Region:48
zd1205: (exit) zd1205_config, /var/tmp/portage/zd1211-80/work/zd1211-driver-r80/src/zd1205.c line 2601
zd1205: (exit) zd1205_init, /var/tmp/portage/zd1211-80/work/zd1211-driver-r80/src/zd1205.c line 8569
usbcore: registered new driver zd1211b
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1 across:506036k
|
EMERGE
| Quote: |
1156195699: Started emerge on: Aug 21, 2006 23:28:19
1156195699: *** emerge search ImageMagick
1156195714: *** terminating.
1156196115: Started emerge on: Aug 21, 2006 23:35:15
1156196115: *** emerge --verbose imagemagick
1156196115: >>> emerge (1 of 2) media-video/mpeg2vidcodec-12-r1 to /
1156196115: === (1 of 2) Cleaning (media-video/mpeg2vidcodec-12-r1::/usr/portage/media-video/mpeg2vidcodec/mpeg2vidcodec-12-r1.ebuild)
1156196117: === (1 of 2) Compiling/Merging (media-video/mpeg2vidcodec-12-r1::/usr/portage/media-video/mpeg2vidcodec/mpeg2vidcodec-12-r1.ebuild)
1156196194: >>> AUTOCLEAN: media-video/mpeg2vidcodec
1156196194: --- AUTOCLEAN: Nothing unmerged.
1156196194: === (1 of 2) Post-Build Cleaning (media-video/mpeg2vidcodec-12-r1::/usr/portage/media-video/mpeg2vidcodec/mpeg2vidcodec-12-r1.ebuild)
1156196194: ::: completed emerge (1 of 2) media-video/mpeg2vidcodec-12-r1 to /
1156196194: >>> emerge (2 of 2) media-gfx/imagemagick-6.2.8.0 to /
1156196194: === (2 of 2) Cleaning (media-gfx/imagemagick-6.2.8.0::/usr/portage/media-gfx/imagemagick/imagemagick-6.2.8.0.ebuild)
1156196196: === (2 of 2) Compiling/Merging (media-gfx/imagemagick-6.2.8.0::/usr/portage/media-gfx/imagemagick/imagemagick-6.2.8.0.ebuild)
1156200677: === (2 of 2) Updating world file (media-gfx/imagemagick-6.2.8.0)
1156200677: >>> AUTOCLEAN: media-gfx/imagemagick
1156200677: --- AUTOCLEAN: Nothing unmerged.
1156200677: === (2 of 2) Post-Build Cleaning (media-gfx/imagemagick-6.2.8.0::/usr/portage/media-gfx/imagemagick/imagemagick-6.2.8.0.ebuild)
1156200677: ::: completed emerge (2 of 2) media-gfx/imagemagick-6.2.8.0 to /
1156200677: *** Finished. Cleaning up...
1156200705: *** exiting successfully.
1156200709: *** terminating.
1156201568: >>> AUTOCLEAN: www-client/mozilla-firefox
1156201573: === Unmerging... (www-client/mozilla-firefox-1.5.0.4)
1156201582: >>> unmerge success: www-client/mozilla-firefox-1.5.0.4
1156201583: === (8 of  Post-Build Cleaning (www-client/mozilla-firefox-1.5.0.5::/usr/portage/www-client/mozilla-firefox/mozilla-firefox-1.5.0.5.ebuild)
1156201583: ::: completed emerge (8 of www-client/mozilla-firefox-1.5.0.5 to /
1156201583: *** Finished. Cleaning up...
1156201603: *** exiting successfully.
1156201613: *** terminating.
1156227624: Started emerge on: Aug 22, 2006 08:20:24
1156227624: *** emerge wormux
1156227625: >>> emerge (1 of 6) media-libs/sdl-image-1.2.3-r1 to /
1156227625: === (1 of 6) Cleaning (media-libs/sdl-image-1.2.3-r1::/usr/portage/media-libs/sdl-image/sdl-image-1.2.3-r1.ebuild)
1156227625: === (1 of 6) Compiling/Merging (media-libs/sdl-image-1.2.3-r1::/usr/portage/media-libs/sdl-image/sdl-image-1.2.3-r1.ebuild)
1156227667: >>> AUTOCLEAN: media-libs/sdl-image
1156227667: --- AUTOCLEAN: Nothing unmerged.
1156227667: === (1 of 6) Post-Build Cleaning (media-libs/sdl-image-1.2.3-r1::/usr/portage/media-libs/sdl-image/sdl-image-1.2.3-r1.ebuild)
1156227667: ::: completed emerge (1 of 6) media-libs/sdl-image-1.2.3-r1 to /
1156227667: >>> emerge (2 of 6) dev-cpp/libxmlpp-2.12.0 to /
1156227667: === (2 of 6) Cleaning (dev-cpp/libxmlpp-2.12.0::/usr/portage/dev-cpp/libxmlpp/libxmlpp-2.12.0.ebuild)
1156227668: === (2 of 6) Compiling/Merging (dev-cpp/libxmlpp-2.12.0::/usr/portage/dev-cpp/libxmlpp/libxmlpp-2.12.0.ebuild)
1156227894: >>> AUTOCLEAN: dev-cpp/libxmlpp
1156227894: --- AUTOCLEAN: Nothing unmerged.
1156227894: === (2 of 6) Post-Build Cleaning (dev-cpp/libxmlpp-2.12.0::/usr/portage/dev-cpp/libxmlpp/libxmlpp-2.12.0.ebuild)
1156227894: ::: completed emerge (2 of 6) dev-cpp/libxmlpp-2.12.0 to /
1156227894: >>> emerge (3 of 6) media-libs/sdl-ttf-2.0.7 to /
1156227894: === (3 of 6) Cleaning (media-libs/sdl-ttf-2.0.7::/usr/portage/media-libs/sdl-ttf/sdl-ttf-2.0.7.ebuild)
1156227895: === (3 of 6) Compiling/Merging (media-libs/sdl-ttf-2.0.7::/usr/portage/media-libs/sdl-ttf/sdl-ttf-2.0.7.ebuild)
1156227954: >>> AUTOCLEAN: media-libs/sdl-ttf
1156227954: --- AUTOCLEAN: Nothing unmerged.
1156227954: === (3 of 6) Post-Build Cleaning (media-libs/sdl-ttf-2.0.7::/usr/portage/media-libs/sdl-ttf/sdl-ttf-2.0.7.ebuild)
1156227954: ::: completed emerge (3 of 6) media-libs/sdl-ttf-2.0.7 to /
1156227954: >>> emerge (4 of 6) media-libs/sdl-net-1.2.5 to /
1156227954: === (4 of 6) Cleaning (media-libs/sdl-net-1.2.5::/usr/portage/media-libs/sdl-net/sdl-net-1.2.5.ebuild)
1156227954: === (4 of 6) Compiling/Merging (media-libs/sdl-net-1.2.5::/usr/portage/media-libs/sdl-net/sdl-net-1.2.5.ebuild)
1156227978: >>> AUTOCLEAN: media-libs/sdl-net
1156227978: --- AUTOCLEAN: Nothing unmerged.
1156227978: === (4 of 6) Post-Build Cleaning (media-libs/sdl-net-1.2.5::/usr/portage/media-libs/sdl-net/sdl-net-1.2.5.ebuild)
1156227978: ::: completed emerge (4 of 6) media-libs/sdl-net-1.2.5 to /
1156227978: >>> emerge (5 of 6) media-libs/sdl-gfx-2.0.13-r1 to /
1156227978: === (5 of 6) Cleaning (media-libs/sdl-gfx-2.0.13-r1::/usr/portage/media-libs/sdl-gfx/sdl-gfx-2.0.13-r1.ebuild)
1156227978: === (5 of 6) Compiling/Merging (media-libs/sdl-gfx-2.0.13-r1::/usr/portage/media-libs/sdl-gfx/sdl-gfx-2.0.13-r1.ebuild)
1156228019: >>> AUTOCLEAN: media-libs/sdl-gfx
1156228019: --- AUTOCLEAN: Nothing unmerged.
1156228019: === (5 of 6) Post-Build Cleaning (media-libs/sdl-gfx-2.0.13-r1::/usr/portage/media-libs/sdl-gfx/sdl-gfx-2.0.13-r1.ebuild)
1156228019: ::: completed emerge (5 of 6) media-libs/sdl-gfx-2.0.13-r1 to /
1156228019: >>> emerge (6 of 6) games-strategy/wormux-0.7.3 to /
1156228019: === (6 of 6) Cleaning (games-strategy/wormux-0.7.3::/usr/portage/games-strategy/wormux/wormux-0.7.3.ebuild)
1156228020: === (6 of 6) Compiling/Merging (games-strategy/wormux-0.7.3::/usr/portage/games-strategy/wormux/wormux-0.7.3.ebuild)
1156228614: === (6 of 6) Updating world file (games-strategy/wormux-0.7.3)
1156228614: >>> AUTOCLEAN: games-strategy/wormux
1156228614: --- AUTOCLEAN: Nothing unmerged.
1156228614: === (6 of 6) Post-Build Cleaning (games-strategy/wormux-0.7.3::/usr/portage/games-strategy/wormux/wormux-0.7.3.ebuild)
1156228614: ::: completed emerge (6 of 6) games-strategy/wormux-0.7.3 to /
1156228614: *** Finished. Cleaning up...
1156228637: *** exiting successfully.
1156228640: *** terminating.
|
|
|
| Back to top |
|
|
smg
Veteran
Joined: 13 Aug 2004
Posts: 1402
Location: /home/stephan
|
| Posted: Thu Aug 24, 2006 10:19 pm Post subject: |
|
|
kannst mal dein fb aus machen in grub? hab da so nen verdacht..
_________________
GnuPG-Key-ID: 0xF8C275D4
Fingerprint: 5B6F 134A 189B A24D 342B 0961 8D4B 0230 F8C2 75D4
| Code: | | perl -WTe '($")=$/;print qq(@{[reverse('0'..'100')]}$/BOOM!$/);' |
|
|
| Back to top |
|
|
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
| Posted: Thu Aug 24, 2006 10:31 pm Post subject: |
|
|
nüx ... hab in grub alles rausgeschmissen was nicht unbedingt nötig ist, aber ich hab den fb eh eincompiliert ... was sagt denn dein Verdacht?  |
|
| Back to top |
|
|
smg
Veteran
Joined: 13 Aug 2004
Posts: 1402
Location: /home/stephan
|
| Posted: Thu Aug 24, 2006 10:34 pm Post subject: |
|
|
| goha wrote: | | nüx ... hab in grub alles rausgeschmissen was nicht unbedingt nötig ist, aber ich hab den fb eh eincompiliert ... was sagt denn dein Verdacht? |
weiß nich ich würds mal ohne fb dingens kompilieren oder mal vanilla bauen... hatte mal aufm laptop ähnliches problem nachm local.start wo der fb initialisiert wurde is irgendwas abgeschmiert! ist schon länger her deswegen gebe ich dass nur sinngemäß wieder.
_________________
GnuPG-Key-ID: 0xF8C275D4
Fingerprint: 5B6F 134A 189B A24D 342B 0961 8D4B 0230 F8C2 75D4
| Code: | | perl -WTe '($")=$/;print qq(@{[reverse('0'..'100')]}$/BOOM!$/);' |
|
|
| Back to top |
|
|
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
| Posted: Thu Aug 24, 2006 10:39 pm Post subject: |
|
|
| smg wrote: | | goha wrote: | | nüx ... hab in grub alles rausgeschmissen was nicht unbedingt nötig ist, aber ich hab den fb eh eincompiliert ... was sagt denn dein Verdacht? |
weiß nich ich würds mal ohne fb dingens kompilieren oder mal vanilla bauen... hatte mal aufm laptop ähnliches problem nachm local.start wo der fb initialisiert wurde is irgendwas abgeschmiert! ist schon länger her deswegen gebe ich dass nur sinngemäß wieder. |
was mich halt nur verwundert is, das es vorhin noch alles gefunzt hat :/ ich hätts ja noch kapiert wenner bei initialisieren von CUPS abschmiert, aber das wird ja nichtmal initialisiert zur bootzeit.
*edit* hab Kernel ohne fb compiliert ... daran liegt es nicht */edit* |
|
| Back to top |
|
|
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
| Posted: Fri Aug 25, 2006 7:28 am Post subject: |
|
|
Starting local ist ja der letzte Punkt beim initialisieren des Systems - da Gentoo das ja sauber abzuschließen scheint (das [OK] gibt das Script ja vermutlich am Ende aus)...
Frage an die Experten: was wird nach der letzten initialisierung noch ausgeführt, bevor das login erscheint? |
|
| Back to top |
|
|
.maverick
Apprentice
Joined: 29 Jan 2004
Posts: 159
Location: Bonn
|
| Posted: Fri Aug 25, 2006 8:05 am Post subject: |
|
|
Wie sieht denn /etc/inittab bei dir aus? Bekommst du nen Login, wenn du
| Code: | | /sbin/agetty 38400 tty1 linux |
in local.start reinschreibst?
/edit AFAIK wird agetty für die zu benutzenden Terminals aufgerufen, was dir dann in diesem die Login-Shell verschafft. |
|
| Back to top |
|
|
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
| Posted: Fri Aug 25, 2006 3:36 pm Post subject: |
|
|
| .maverick wrote: | Wie sieht denn /etc/inittab bei dir aus? Bekommst du nen Login, wenn du
| Code: | | /sbin/agetty 38400 tty1 linux |
in local.start reinschreibst?
/edit AFAIK wird agetty für die zu benutzenden Terminals aufgerufen, was dir dann in diesem die Login-Shell verschafft. |
versucht ... auch auf verschiedenen Terminals ... nix 
das letzte, was er laut messages macht is ja das hinzufuegen des SWAP ... kann das was damit zu tun haben (obwohl ich auf anhieb nicht wuesste was ...)
INITTAB
| Quote: |
#
# /etc/inittab: This file describes how the INIT process should set up
# the system in a certain run-level.
#
# Author: Miquel van Smoorenburg, <miquels@cistron.nl>
# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com>
# Modified by: Daniel Robbins, <drobbins@gentoo.org>
# Modified by: Martin Schlemmer, <azarah@gentoo.org>
#
# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab,v 1.5 2005/12/22 02:03:23 vapier Exp $
# Default runlevel.
id:3:initdefault:
# System initialization, mount local filesystems, etc.
si::sysinit:/sbin/rc sysinit
# Further system initialization, brings up the boot runlevel.
rc::bootwait:/sbin/rc boot
l0:0:wait:/sbin/rc shutdown
l1:S1:wait:/sbin/rc single
l2:2:wait:/sbin/rc nonetwork
l3:3:wait:/sbin/rc default
l4:4:wait:/sbin/rc default
l5:5:wait:/sbin/rc default
l6:6:wait:/sbin/rc reboot
#z6:6:respawn:/sbin/sulogin
# TERMINALS
c1:12345:respawn:/sbin/agetty 38400 tty1 linux
c2:2345:respawn:/sbin/agetty 38400 tty2 linux
c3:2345:respawn:/sbin/agetty 38400 tty3 linux
c4:2345:respawn:/sbin/agetty 38400 tty4 linux
c5:2345:respawn:/sbin/agetty 38400 tty5 linux
c6:2345:respawn:/sbin/agetty 38400 tty6 linux
# SERIAL CONSOLES
#s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100
#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100
# What to do at the "Three Finger Salute".
ca:12345:ctrlaltdel:/sbin/shutdown -r now
# Used by /etc/init.d/xdm to control DM startup.
# Read the comments in /etc/init.d/xdm for more
# info. Do NOT remove, as this will start nothing
# extra at boot if /etc/init.d/xdm is not added
# to the "default" runlevel.
x:a:once:/etc/X11/startDM.sh
|
|
|
| Back to top |
|
|
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
| Posted: Fri Aug 25, 2006 5:29 pm Post subject: |
|
|
*Jubel* Problem gefixed --> die /etc/hosts war im Sack ... ähhh defekt
hab in /etc/inittab mal defaultrunlevel 1 ausprobiert und mich von dort über 2 auf 3 vorgearbeitet, wo das System sich wieder aufgehängt hat. Dann hab ich mal nach allen Dateien gesucht, die in den letzten 2 Tagen geändert wurden und da war die hosts drin. Da stand nur noch Schrott drin, ka warum ....
auf jeden Fall bin ich jetzt wieder glücklicher Gentoo-User ... ich wäre fast soweit gewesen Verzweiflungstaten zu begehen ... so XP-mäßig und so
Vielen Dank an alle Helfer 
Hardy |
|
| Back to top |
|
|
.maverick
Apprentice
Joined: 29 Jan 2004
Posts: 159
Location: Bonn
|
| Posted: Fri Aug 25, 2006 5:47 pm Post subject: |
|
|
| goha wrote: |
hab in /etc/inittab mal defaultrunlevel 1 ausprobiert und mich von dort über 2 auf 3 vorgearbeitet, wo das System sich wieder aufgehängt hat. Dann hab ich mal nach allen Dateien gesucht, die in den letzten 2 Tagen geändert wurden und da war die hosts drin. Da stand nur noch Schrott drin, ka warum ....
|
Hmm, was genau war denn "Müll"? In vim tausende ^@?
Benutzt du XFS auf der root-Platte? |
|
| Back to top |
|
|
goha
n00b
Joined: 24 Aug 2006
Posts: 9
|
| Posted: Fri Aug 25, 2006 6:57 pm Post subject: |
|
|
nein ... ein paar unlogische @ waren zwar auch drin ... aber vor allem eigentlich die komplette hosts-Datei - nur als hätte sie jemand zerstückelt und wahllos aneinander gereiht.
die Root ist ext2. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
