| View previous topic :: View next topic |
| Author |
Message |
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
 Posted: Tue Aug 22, 2006 4:37 pm Post subject: lm_sensors |
 |
|
ciao,sto provando a fare andare i sensori per rilevare la temperatura,e ho seguito la guida https://forums.gentoo.org/viewtopic.php?t=101573
ma non riesco a risolvere questo problema nonostante abbia provato con delle soluzioni suggerite in altri topic...
| Code: |
King king # /etc/init.d/lm_sensors start
* Loading lm_sensors modules...
* Loading i2c-i801 .. [ ok ]
* Loading eeprom ... [ ok ]
* Initializing sensors ... [ !! ]
|
qualcuno è riuscito a risolvere?
ho un toshiba m40x-122,con cpu centrino
se serve qualche info chiedete pure
ciao
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
 |
kattivo
Guru
Joined: 28 Jan 2005
Posts: 450
Location: Treviso
|
| Posted: Tue Aug 22, 2006 5:49 pm Post subject: |
|
|
posta un po di log, dmesg
_________________
Eurostep Consulting S.r.l.
Andrea P. <andrea@eurostep.it> |
|
| Back to top |
|
|
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
| Posted: Wed Sep 06, 2006 8:06 pm Post subject: |
|
|
scusa per il ritardo...
ecco dmesg
| Code: |
Linux version 2.6.17 (root@King) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #22 SMP Tue Aug 22 18:09:28 Local time zone must be set--see zic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fee0000 (usable)
BIOS-e820: 000000002fee0000 - 000000002feea000 (ACPI data)
BIOS-e820: 000000002feea000 - 000000002ff00000 (ACPI NVS)
BIOS-e820: 000000002ff00000 - 0000000030000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
766MB LOWMEM available.
On node 0 totalpages: 196320
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 192224 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 TOSCPL ) @ 0x000f6b70
ACPI: RSDT (v001 TOSCPL RSDT 0x06040000 LTP 0x00000000) @ 0x2fee33f6
ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x2fee9e88
ACPI: FADT (v001 TOSCPL ALVISO 0x06040000 LOHR 0x00000032) @ 0x2fee9ef0
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x2fee9fd8
ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x2fee9f9c
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20030224) @ 0x2fee430c
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20030224) @ 0x2fee3c7a
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x2fee3835
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x2fee3657
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x2fee343e
ACPI: DSDT (v001 TOSCPL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:b0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda4 vga=791
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0495000 soft=c048d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1596.059 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773904k/785280k available (2454k kernel code, 10936k reserved, 912k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3195.82 BogoMIPS (lpj=15979142)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
Total of 1 processors activated (3195.82 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: c8100000-c81fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bus 7, cardbus bridge: 0000:06:04.0
IO window: 00004400-000044ff
IO window: 00004800-000048ff
PREFETCH window: 40000000-41ffffff
MEM window: 42000000-43ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: c8200000-c82fffff
PREFETCH window: 40000000-41ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1157579090.480:1): initialized
NTFS driver 2.1.27 [Flags: R/W].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
0000:00:1d.0: Performing full reset
0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
0000:00:1d.1: Performing full reset
0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
0000:00:1d.2: Performing full reset
0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
0000:00:1d.3: Performing full reset
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xf0880000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:570c
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xf082a000, 00:0f:b0:83:f0:30, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GMA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18F0 irq 14
ata1: dev 0 cfg 49:2f00 82:7c6b 83:5909 84:6003 85:7c69 86:1809 87:6003 88:203f
ata1: dev 0 ATA-6, max UDMA/100, 117210240 sectors: LBA
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: TOSHIBA MK6025GA Rev: KA20
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc8000000
ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.17 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: uevent
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.17 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: uevent
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.17 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: uevent
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840
usb usb4: default language 0x0409
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.17 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: uevent
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
usb usb5: default language 0x0409
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.17 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: uevent
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
drivers/usb/atm/speedtch.c: speedtch_usb_init: driver version 1.10
usbcore: registered new driver speedtch
drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1e.2 to 64
uhci_hcd 0000:00:1d.0: suspend_rh (auto-stop)
uhci_hcd 0000:00:1d.1: suspend_rh (auto-stop)
input: AT Translated Set 2 keyboard as /class/input/input0
uhci_hcd 0000:00:1d.2: suspend_rh (auto-stop)
intel8x0_measure_ac97_clock: measured 59416 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: Intel ICH6 with ALC250 at 0xc8000800, irq 22
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
uhci_hcd 0000:00:1d.3: suspend_rh (auto-stop)
ReiserFS: sda4: found reiserfs format "3.6" with standard journal
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
input: PS/2 Mouse as /class/input/input3
input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
ReiserFS: sda4: using ordered data mode
ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda4: checking transaction log (sda4)
ReiserFS: sda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 679 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[fglrx] module loaded - fglrx 8.24.8 [Apr 11 2006] on minor 0
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 23
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
Adding 393584k swap on /dev/sda3. Priority:-1 extents:1 across:393584k
eth0: link down
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 52654080
[fglrx] max LFB = 52654080
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
uhci_hcd 0000:00:1d.0: wakeup_rh (auto-start)
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: skipped 1 descriptor after interface
usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: uevent
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: uevent
usbhid 2-1:1.0: usb_probe_interface
usbhid 2-1:1.0: usb_probe_interface - got id
input: HID 1241:1166 as /class/input/input5
input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.0-1
drivers/usb/core/inode.c: creating file '002'
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 52654080
[fglrx] max LFB = 52654080
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
|
quali log ti servono?
ciao
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
|
starise
Apprentice
Joined: 09 Oct 2004
Posts: 211
Location: Napoli
|
| Posted: Wed Sep 06, 2006 11:34 pm Post subject: stesso problema |
|
|
io sto avendo il tuo stesso problema, mi si inchioda su
| Code: | | * Initializing sensors ... [ !! ] |
Se trovo una soluzione vi faccio sapere...
_________________
Notebook: Dell XPS M1330, Core 2 Duo 2GHz, 2 GB DDR2, HD 200GB 7200rpm, GeForce 8400M - powered by Gentoo |
|
| Back to top |
|
|
nikko96
Apprentice
Joined: 22 Jul 2005
Posts: 229
Location: Pulcinella's Country
|
| Posted: Sat Sep 09, 2006 7:08 pm Post subject: Re: lm_sensors |
|
|
| kingrebound wrote: | ciao,sto provando a fare andare i sensori per rilevare la temperatura,e ho seguito la guida https://forums.gentoo.org/viewtopic.php?t=101573
ma non riesco a risolvere questo problema nonostante abbia provato con delle soluzioni suggerite in altri topic...
| Code: |
King king # /etc/init.d/lm_sensors start
* Loading lm_sensors modules...
* Loading i2c-i801 .. [ ok ]
* Loading eeprom ... [ ok ]
* Initializing sensors ... [ !! ]
|
qualcuno è riuscito a risolvere?
ho un toshiba m40x-122,con cpu centrino
se serve qualche info chiedete pure
ciao |
Sei sicuro di aver attivato tutti i moduli giusti nel kernel?
Guarda questo wiki-gentoo,a me e' stato utile,ciao.
_________________
My system: cpu Intel core 2 duo e6750,mb asus p5n-e sli,scheda grafica nvidia GeForce 9600 GT,kernel 2.6.31-gentoo-r6 |
|
| Back to top |
|
|
Gr3yFox
Apprentice
Joined: 11 May 2006
Posts: 218
Location: Genoa, Italy
|
|
| Back to top |
|
|
kattivo
Guru
Joined: 28 Jan 2005
Posts: 450
Location: Treviso
|
| Posted: Sun Sep 10, 2006 4:38 pm Post subject: |
|
|
Io l'ho usato
_________________
Eurostep Consulting S.r.l.
Andrea P. <andrea@eurostep.it> |
|
| Back to top |
|
|
Gr3yFox
Apprentice
Joined: 11 May 2006
Posts: 218
Location: Genoa, Italy
|
|
| Back to top |
|
|
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
| Posted: Mon Sep 11, 2006 2:27 pm Post subject: |
|
|
lo avevo fatto,comunque questo e' l'output:
| Code: |
# sensors-detect revision 1.413 (2006/01/19 20:28:00)
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 00:1f.3: Intel 82801FB ICH6
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): y
Module loaded succesfully.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): y
Module loaded succesfully.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus I801 adapter at 20a0
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x08
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x51
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no): y
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Do you want to scan for secondary Super I/O sensors? (YES/no): y
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 20a0'
Busdriver `i2c-i801', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 20a0'
Busdriver `i2c-i801', I2C address 0x51
Chip `SPD EEPROM' (confidence: 8)
I will now generate the commands needed to load the I2C modules.
If you want to load the modules at startup, generate a config file
below and make sure lm_sensors gets started at boot time; e.g
$ rc-update add lm_sensors default
To make the sensors modules behave correctly, add these lines to
/etc/modules.d/lm_sensors and run modules-update:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----end cut here----
WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really should
try these commands right now to make sure everything is working properly.
Monitoring programs won't work until it's done.
To load everything that is needed, execute the commands below...
#----cut here----
# I2C adapter drivers
modprobe i2c-i801
# I2C chip drivers
modprobe eeprom
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----end cut here----
Do you want to overwrite /etc/conf.d/lm_sensors? Enter s to specify other file n ame?
(yes/NO/s): y
Done.
|
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
|
Gr3yFox
Apprentice
Joined: 11 May 2006
Posts: 218
Location: Genoa, Italy
|
|
| Back to top |
|
|
nikko96
Apprentice
Joined: 22 Jul 2005
Posts: 229
Location: Pulcinella's Country
|
| Posted: Mon Sep 11, 2006 5:36 pm Post subject: |
|
|
Sembra che il device non e' stato riconosciuto perche' manca qualcosa nel kernel,infatti
| Code: | King king # /etc/init.d/lm_sensors start
* Loading lm_sensors modules...
* Loading i2c-i801 .. [ ok ]
* Loading eeprom ... [ ok ]
* Initializing sensors ... [ !! ] |
Se non sbaglio,al boot dovrebbe esserci anche un
Controlla se questo è attivo | Code: |
Bus options (PCI, PCMCIA, EISA, MCA, ISA)
[*] PCI support
[*] ISA support |
_________________
My system: cpu Intel core 2 duo e6750,mb asus p5n-e sli,scheda grafica nvidia GeForce 9600 GT,kernel 2.6.31-gentoo-r6 |
|
| Back to top |
|
|
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
| Posted: Mon Sep 11, 2006 6:45 pm Post subject: |
|
|
li ho controllati e ci sono entrambi...al boot cmq i2c-dev non c'e,e anche caricandolo a mano non cambia nulla...sempre quei 2 maledetti [!!]
| Code: |
CONFIG_PCI=y
CONFIG_ISA=y
|
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
|
nikko96
Apprentice
Joined: 22 Jul 2005
Posts: 229
Location: Pulcinella's Country
|
| Posted: Mon Sep 11, 2006 8:12 pm Post subject: |
|
|
| kingrebound wrote: | li ho controllati e ci sono entrambi...al boot cmq i2c-dev non c'e,e anche caricandolo a mano non cambia nulla...sempre quei 2 maledetti [!!]
| Code: |
CONFIG_PCI=y
CONFIG_ISA=y
|
|
Allora devi abilitare il modulo per il tuo chip-sensor | Code: |
<*> Hardware Monitoring support
< > Analog Devices ADM1021 and compatibles
< > Analog Devices ADM1025 and compatibles
--------cut--------
<M> ITE IT87xx and compatibles
< > National Semiconductor LM63
< > National Semiconductor LM75 and compatibles
< > National Semiconductor LM77
<> National Semiconductor LM78 and compatibles
< > National Semiconductor LM80
------cut------
< > Maxim MAX1619 sensor chip
< > National Semiconductor PC87360 family
< > Silicon Integrated Systems Corp. SiS5595
< > SMSC LPC47M10x and compatibles
< > SMSC LPC47B397-NC
< > VIA686A
[< > VT8231
-----cut----- |
Se non sai quale abilitane molti,come moduli ovviamente.
p.s. quella che vedi è la mia configurazione
_________________
My system: cpu Intel core 2 duo e6750,mb asus p5n-e sli,scheda grafica nvidia GeForce 9600 GT,kernel 2.6.31-gentoo-r6 |
|
| Back to top |
|
|
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
| Posted: Tue Sep 12, 2006 12:47 am Post subject: |
|
|
questi sono i moduli inseriti nel kernel....
| Code: |
<*> Hardware Monitoring support
<M> Analog Devices ADM1021 and compatibles
<M> Analog Devices ADM1025 and compatibles
<M> Analog Devices ADM1026 and compatibles
<M> Analog Devices ADM1031 and compatibles
<M> Analog Devices ADM9240 and compatibles
<M> Asus ASB100 Bach
<M> Attansic ATXP1 VID controller
<M> Dallas Semiconductor DS1621 and DS1625
<M> Fintek F71805F/FG
<M> FSC Hermes
<M> FSC Poseidon
<M> Genesys Logic GL518SM
<M> Genesys Logic GL520SM
<M> ITE IT87xx and compatibles
<M> National Semiconductor LM63
<M> National Semiconductor LM75 and compatibles
<M> National Semiconductor LM77
<M> National Semiconductor LM78 and compatibles
<M> National Semiconductor LM80
<M> National Semiconductor LM83
<M> National Semiconductor LM85 and compatibles
<M> National Semiconductor LM87
<M> National Semiconductor LM90 and compatibles
<M> National Semiconductor LM92 and compatibles
<M> Maxim MAX1619 sensor chip
<M> National Semiconductor PC87360 family
<M> Silicon Integrated Systems Corp. SiS5595 <M> SMSC LPC47M10x and compatibles
<M> SMSC LPC47B397-NC
<M> VIA686A <M> VT8231
<M> Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F
<M> Winbond W83792D
<M> Winbond W83L785TS-S
<M> Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF
<M> Winbond W83627EHF
<M> IBM Hard Drive Active Protection System (hdaps)
[*] Hardware Monitoring Chip debugging messages
|
manca qualcosa?
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
|
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
| Posted: Sat Sep 16, 2006 10:00 am Post subject: |
|
|
 ...nessuno che riesca ad aiutarmi?
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
|
nikko96
Apprentice
Joined: 22 Jul 2005
Posts: 229
Location: Pulcinella's Country
|
| Posted: Sat Sep 16, 2006 10:25 am Post subject: |
|
|
| kingrebound wrote: | | ...nessuno che riesca ad aiutarmi? |
Ciao,un lspci cosa riporta?
_________________
My system: cpu Intel core 2 duo e6750,mb asus p5n-e sli,scheda grafica nvidia GeForce 9600 GT,kernel 2.6.31-gentoo-r6 |
|
| Back to top |
|
|
riverdragon
Veteran
Joined: 14 Sep 2006
Posts: 1269
Location: Verona
|
| Posted: Sat Sep 16, 2006 10:51 am Post subject: |
|
|
Non quanto sia deplorevole il cross posting ma nell'altro forum in cui ho scritto non ho avuto aiuti significativi.
Ho seguito la guida del wiki per attivare la lettura dei sensori hardware.
La versione 2.10.0 di lm_sensors supporta il bus i2c del chipset ICH7 (Intel, il chipset della piattaforma Centrino Duo) ma il comando sensors-detect rileva solo tre unknown adapter NVIDIA I2C Device. Il comando sensors in più restituisce | Code: | Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'! |
Sysfs è correttamente montato, non esiste nessun ebuild chiamato libsensors o sensors o simili, in portage. revdep-rebuild --soname=/usr/lib/libsensors.so.3 riemerge qualche pacchetto ma senza miglioramenti.
Questo è uno spaccato della configurazione del kernel, segue le indicazioni della guida | Code: | tomnote linux # grep I2C .config
# I2C support
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
# I2C Algorithms
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
# I2C Hardware Bus support
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# Miscellaneous I2C Chip support
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_FB_NVIDIA_I2C=y |
Infine, quando cerco di far partire il servizio tramite /etc/init.d/lm_sensors start ottengo | Code: | tomnote linux # /etc/init.d/lm_sensors start
* Service lm_sensors starting [ !! ]
* ERROR: lm_sensors failed to start |
Ho provato senza successo a ricompilare il kernel aggiungendo come moduli il supporto a tutte le voci elencate.
Ho provato a lanciare lo script sensors-detect aggiornato che ho trovato sul sito lm_sensors.org ma mi restituisce questo | Code: | Sorry, no sensors were detected.
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported. |
Come è possibile? La versione di sensors-detect contenuta nell'ebuild 2.10.0 di portage mi rileva almeno il bus nvidia...
qui un altro che con la stessa scheda madre ha i miei stessi problemi.
Allego l'output di lspci | Code: | 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce Go 7400 (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
07:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
07:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
07:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
07:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
07:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) |
Mi viene da pensare che non ci siano sensori hardware, ma suona alquanto strano. Ho un asus v6j. |
|
| Back to top |
|
|
nikko96
Apprentice
Joined: 22 Jul 2005
Posts: 229
Location: Pulcinella's Country
|
| Posted: Sat Sep 16, 2006 12:10 pm Post subject: |
|
|
Non vedo SMBus controller in giro,può essere disattivato di default,in questo caso prova a vedere da bios.
Ciao
_________________
My system: cpu Intel core 2 duo e6750,mb asus p5n-e sli,scheda grafica nvidia GeForce 9600 GT,kernel 2.6.31-gentoo-r6 |
|
| Back to top |
|
|
skypjack
l33t
Joined: 05 Aug 2006
Posts: 884
Location: Italia - Firenze
|
| Posted: Sat Sep 16, 2006 2:23 pm Post subject: |
|
|
Sembra che lm_sensors su Centrino Duo abbia qualche problemino... E confermo!!
Mi riconosce i sensori ma poi quando va ad usarli... dice "not found"!!
Purtroppo, è un problema noto... Mi sa che dovremo aspettare un pò per vederlo funzionare... |
|
| Back to top |
|
|
riverdragon
Veteran
Joined: 14 Sep 2006
Posts: 1269
Location: Verona
|
| Posted: Sat Sep 16, 2006 2:31 pm Post subject: |
|
|
Aspettare un po' inteso come "aspettare la nuova versione di lm_sensors" o "aspettare un nuovo bios dal produttore"?
Nel mio bios non c'è nulla di utile purtroppo. |
|
| Back to top |
|
|
skypjack
l33t
Joined: 05 Aug 2006
Posts: 884
Location: Italia - Firenze
|
| Posted: Sat Sep 16, 2006 2:40 pm Post subject: |
|
|
Aspettare la nuova versione di lm_sensors... Almeno spero!!
Ma ne so quanto te...
Ricordo solo che quando ho affrontato il problema ho scoperto che era tanto diffuso quanto irrisolto, purtroppo... |
|
| Back to top |
|
|
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
| Posted: Sat Sep 16, 2006 3:57 pm Post subject: |
|
|
questo e' il mio lspci
| Code: |
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300]
06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:04.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
|
e ho un centrino normale,non il duo...come vedi smbus e' riconosciuto,anche in sensor detect...
se serve ancora qualcosa chiedete pure
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
|
nikko96
Apprentice
Joined: 22 Jul 2005
Posts: 229
Location: Pulcinella's Country
|
| Posted: Sat Sep 16, 2006 6:20 pm Post subject: |
|
|
Vedete un po' se può essere d'aiuto questo link http://home.tiscali.nl/isildur/toshiba/.
Anche se non uguale penso possa essere utile,date un occhio al config del kernel,
può darsi che vi siete dimenticati di attivare qualcosa.
_________________
My system: cpu Intel core 2 duo e6750,mb asus p5n-e sli,scheda grafica nvidia GeForce 9600 GT,kernel 2.6.31-gentoo-r6 |
|
| Back to top |
|
|
kingrebound
Apprentice
Joined: 05 Mar 2006
Posts: 160
Location: Verona
|
| Posted: Sun Sep 17, 2006 12:14 am Post subject: |
|
|
lo avevo gia visto  ....cmq credo che il problema sia riduardante l'hardware monitoring support del kernel....qualcuno ha idea di quale driver selezionare?il mio pc e' un toshiba satellite m40x-122....
notte
_________________
porca miseria...mai che riesco a dire una cosa seria!!!
[Arsenico HC] |
|
| Back to top |
|
|
riverdragon
Veteran
Joined: 14 Sep 2006
Posts: 1269
Location: Verona
|
| Posted: Sun Sep 17, 2006 10:52 am Post subject: |
|
|
| Ho abilitato come moduli tutte le voci trovate sotto "Hardware Monitoring Support" ma non cambia nulla, anzi: ora anche sensors-detect installato non rileva più alcunché. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
