Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
which mobo : asus p5b or p5n 32 sli
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
widu
Guru
Guru


Joined: 05 Jun 2004
Posts: 333
Location: Freiburg

PostPosted: Sun Nov 12, 2006 12:45 pm    Post subject: which mobo : asus p5b or p5n 32 sli Reply with quote

Hi,
I'm going to buy a new machine, and I've got a problem to decide wich motherboard to select.

a) asus p5b
there's a lot of threads about that jmicron controller on the board and it seams that you still have to use experimentel kernel (like mm) to get ide-drives working. I indeed fear having nothing but trouble with that.
b) asus p5n 32 sli
well i couldn't find a lot of information about this board. it's got an nforce4 chipset. Is there somebody using this board, Are there problems with it?

Just in case it does matter:
the machine I like to build will be
Intel core2duo E6600
2 x SATA Harddrive
1 x IDE DVD burner

Thanks for your answers

widu
_________________
nature is a heterosexual fiction
Back to top
View user's profile Send private message
Keruskerfuerst
Advocate
Advocate


Joined: 01 Feb 2006
Posts: 2289
Location: near Augsburg, Germany

PostPosted: Sun Nov 12, 2006 1:45 pm    Post subject: Reply with quote

A Intel based mainboard should be better for the Core2Duo.
You can also buy a 975X based mainboard for this processor. This chipset supports directly a PATA port.
Back to top
View user's profile Send private message
kernelOfTruth
Watchman
Watchman


Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)

PostPosted: Sun Nov 12, 2006 4:15 pm    Post subject: Reply with quote

Quote:
2 x SATA Harddrive
1 x IDE DVD burner


like Keruskerfuerst wrote, I would also recommend the use of a 975X based mainboard

I use the P5W DH Deluxe, it costs a little more than the others, but it has good overclocking potential,
lots of ports (no parallel :cry: :lol: ), wlan, ...

there also exist some real tricky problems with the JMicron-controller:
you can't boot off an ATAPI-Drive on the JMB361, whereas off the JMB363 you can
(hope that matches the truth)

-> this should be the ideal candidate for you

your two SATA-Harddrives can then be connected to:
- the SiliconImage Hardware-Raid (no drivers needed !), working fine here
- the Intel ICH7R (with Intel Matrix Raid / or Linux raid drivers), should do fine, too
- JMicron -> which could make trouble :roll:

the IDE DVD-Burner should run perfectly when attached to the IDE/ATA-Port of the Intel ICH7R

that board should also do fine with official Gentoo LiveCD 2006.1 release

anyone who has experience with Intel Matrix raid on that board + Official Gentoo LiveCD please confirm! :idea:

thanks in advance
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa

Hardcore Gentoo Linux user since 2004 :D
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum