View previous topic :: View next topic |
Author |
Message |
dberkholz Retired Dev
Joined: 18 Mar 2003 Posts: 1008 Location: Minneapolis, MN, USA
|
Posted: Mon Jun 09, 2003 9:29 pm Post subject: |
|
|
xfjsx wrote: | hey when i ran Xf86 config i chose the radeon card and X started fine and kde looks nice, but i dont think i have REAL ati drivers with 3d aclleration setup do i? i try to run 3d games and they say they cant locate the opengl subsystem, and opengl right? |
Is your Radeon higher than 9200? If so, emerge ati-drivers. If it's 9200 or lower, emerge xfree-drm. (You can do ati-drivers for any r200 chipset Radeon, but xfree-drm is open source and therefore good.)
I recently posted a link to a howto on getting xfree-drm working (see about 5 posts up). With ati-drivers, once they're emerged you run fglrxconfig. Make sure you have your kernel configured correctly either way. |
|
Back to top |
|
|
xfjsx n00b
Joined: 09 Jun 2003 Posts: 40
|
Posted: Mon Jun 09, 2003 11:50 pm Post subject: |
|
|
i have a radeon mobility U1 for my presario 900us laptop. so which do i want?
thanks! |
|
Back to top |
|
|
dberkholz Retired Dev
Joined: 18 Mar 2003 Posts: 1008 Location: Minneapolis, MN, USA
|
Posted: Tue Jun 10, 2003 12:07 am Post subject: |
|
|
It's based on the 7500. I recommend xfree-drm. |
|
Back to top |
|
|
BadGuy n00b
Joined: 13 May 2003 Posts: 44
|
Posted: Tue Jun 10, 2003 10:59 am Post subject: |
|
|
Yes try emerging xfree-drm also you might want to do opengl-update xfree if you haven't done so already. KDE btw isn't 3d and has absolutely nothing to do with 3d either so KDE will run just fine if you don't have opengl support. |
|
Back to top |
|
|
Grez n00b
Joined: 27 Aug 2002 Posts: 13
|
Posted: Tue Jun 10, 2003 3:39 pm Post subject: |
|
|
help please
I disabled DRI/DRM in the kernel and enabled AGPGART (I think I got the right chipset, I'm using i875)
here's what I'm getting:
Code: |
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-xfs-r3 i686 [ELF]
Build Date: 09 June 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jun 10 17:24:39 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000ebc0, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2578 card 147b,1022 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2579 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 147b,1022 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 147b,1022 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 147b,1022 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 147b,1022 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 147b,1022 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 147b,1022 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 147b,1022 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 147b,1022 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e44 card 174b,7c00 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e64 card 174b,7c01 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:05:0: chip 8086,1229 card 8086,000c rev 08 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xf7ffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700] rev 0, Mem @ 0xe8000000/27, 0xf9000000/16, I/O @ 0xa000/8
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary) rev 0, Mem @ 0xf0000000/27, 0xf9010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[1] -1 0 0xfb100000 - 0xfb100fff (0x1000) MX[B]
[2] -1 0 0xfc003000 - 0xfc0030ff (0x100) MX[B]
[3] -1 0 0xfc002000 - 0xfc0021ff (0x200) MX[B]
[4] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[5] -1 0 0xfc000000 - 0xfc0003ff (0x400) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000b000 - 0x0000b03f (0x40) IX[B]
[10] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[12] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[14] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[15] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[16] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[17] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[1] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[1] -1 0 0xfb100000 - 0xfb100fff (0x1000) MX[B]
[2] -1 0 0xfc003000 - 0xfc0030ff (0x100) MX[B]
[3] -1 0 0xfc002000 - 0xfc0021ff (0x200) MX[B]
[4] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[5] -1 0 0xfc000000 - 0xfc0003ff (0x400) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000b000 - 0x0000b03f (0x40) IX[B]
[10] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[12] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[14] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[15] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[16] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[17] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[1] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[6] -1 0 0xfb100000 - 0xfb100fff (0x1000) MX[B]
[7] -1 0 0xfc003000 - 0xfc0030ff (0x100) MX[B]
[8] -1 0 0xfc002000 - 0xfc0021ff (0x200) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xfc000000 - 0xfc0003ff (0x400) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000b000 - 0x0000b03f (0x40) IX[B]
[19] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[20] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[21] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[23] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[24] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[25] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[26] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 2.9.12
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO), ATI RV280 Ya (R9200),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350 AR (R9600 PRO), ATI RV350 NP (M10), ATI R300 AD (R9500),
ATI R300 AE (R9500), ATI R300 AF (R9500),
ATI R300 AG (Fire GL Z1/X1), ATI R300 ND (R9700 PRO),
ATI R300 NE (R9700/R9500 PRO), ATI R300 NF (R9600 TX),
ATI R300 NG (Fire GL X1), ATI R350 AK (Fire GL unknown),
ATI R350 NH (R9800), ATI R350 NK (Fire GL unknown)
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI R300 ND (R9700 PRO) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[6] -1 0 0xfb100000 - 0xfb100fff (0x1000) MX[B]
[7] -1 0 0xfc003000 - 0xfc0030ff (0x100) MX[B]
[8] -1 0 0xfc002000 - 0xfc0021ff (0x200) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xfc000000 - 0xfc0003ff (0x400) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000b000 - 0x0000b03f (0x40) IX[B]
[19] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[20] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[21] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[23] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[24] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[25] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[26] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x082211d8
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[6] -1 0 0xfb100000 - 0xfb100fff (0x1000) MX[B]
[7] -1 0 0xfc003000 - 0xfc0030ff (0x100) MX[B]
[8] -1 0 0xfc002000 - 0xfc0021ff (0x200) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xfc000000 - 0xfc0003ff (0x400) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000b000 - 0x0000b03f (0x40) IX[B]
[22] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[23] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[24] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[26] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[27] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[28] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[29] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI R300 ND (R9700 PRO)" (Chipset = 0x4e44)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c00)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xf9000000
(--) fglrx(0): ChipRevID = 0x02
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(EE) fglrx(0): board is third party board
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=31000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(II) fglrx(0): Monitor0: Using hsync range of 27.00-96.00 kHz
(II) fglrx(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
(II) fglrx(0): Clock range: 20.00 to 400.00 MHz
(II) fglrx(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) fglrx(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) fglrx(0): Not using default mode "1280x1024" (height too large for virtual size)
(--) fglrx(0): Virtual size is 1280x960 (pitch 1280)
(**) fglrx(0): *Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
(**) fglrx(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) fglrx(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) fglrx(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) fglrx(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) fglrx(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync
(**) fglrx(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) fglrx(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) fglrx(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) fglrx(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) fglrx(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "1024x768" 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) fglrx(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync
(**) fglrx(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(II) fglrx(0): Modeline "928x696" 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync
(**) fglrx(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync
(**) fglrx(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) fglrx(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "800x600" 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) fglrx(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) fglrx(0): Modeline "800x600" 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) fglrx(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) fglrx(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) fglrx(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) fglrx(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) fglrx(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
(**) fglrx(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) fglrx(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(II) fglrx(0): Modeline "640x512" 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync
(**) fglrx(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
(**) fglrx(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) fglrx(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) fglrx(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) fglrx(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) fglrx(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) fglrx(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) fglrx(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(**) fglrx(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) fglrx(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) fglrx(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) fglrx(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) fglrx(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) fglrx(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
(**) fglrx(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) fglrx(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) fglrx(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) fglrx(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) fglrx(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) fglrx(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) fglrx(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) fglrx(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) fglrx(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) fglrx(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) fglrx(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) fglrx(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) fglrx(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) fglrx(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) fglrx(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) fglrx(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 2.9.12
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000c87
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf9000000 - 0xf900ffff (0x10000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[8] -1 0 0xfb100000 - 0xfb100fff (0x1000) MX[B]
[9] -1 0 0xfc003000 - 0xfc0030ff (0x100) MX[B]
[10] -1 0 0xfc002000 - 0xfc0021ff (0x200) MX[B]
[11] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[12] -1 0 0xfc000000 - 0xfc0003ff (0x400) MX[B]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[14] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[15] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[16] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[17] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[21] 0 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000b000 - 0x0000b03f (0x40) IX[B]
[25] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[26] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[27] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[29] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[30] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[31] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[32] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[33] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xe86b0000 (size=0x07950000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "agpgart"
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8924000
(II) fglrx(0): [drm] mapped SAREA 0xf8924000 to 0x48b9f000
(II) fglrx(0): [drm] framebuffer handle = 0xe8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 2.9.12
(II) fglrx(0): Date: May 9 2003
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.4.20-xfs-r3
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xf9000000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
|
|
|
Back to top |
|
|
Houser n00b
Joined: 08 Jun 2003 Posts: 9
|
Posted: Wed Jun 11, 2003 9:10 am Post subject: did you run fglxsetup? |
|
|
No 1 you MUST be sure of the AGP chipset!! You should know this if you built the comp urself
No 2. it looks like its trying to load ATI Fire GL DRM kernel module, is this what you setup with fglx config?
Knowing the answer to these questions will most likely answer your questions. _________________ Gentoo Box
T-Bird 1 Ghz
512 Ram
VIA KT133
ATI Radeon 7500( RV200 QW) |
|
Back to top |
|
|
Grez n00b
Joined: 27 Aug 2002 Posts: 13
|
Posted: Wed Jun 11, 2003 10:31 am Post subject: |
|
|
I am sure of the Chipset, it's i875 Canterwood. It's just this isn't listed in the menuconfig. I guess it's too new.
Anyway I managed to fix it, I changed the agpgart to a module and then set the module to autoload with parameter agp_try_unsupported=1
All working now with a GLXgears score of about 4700 |
|
Back to top |
|
|
dberkholz Retired Dev
Joined: 18 Mar 2003 Posts: 1008 Location: Minneapolis, MN, USA
|
Posted: Wed Jun 11, 2003 2:41 pm Post subject: |
|
|
Grez wrote: | Code: | (II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
...
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
|
|
Things might work a little better if you set the Bus ID to be 1:0:0 initially, I believe it's in Section "Device" of XF86Config. Your best bet for AGP chipset would probably be the Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 etc. since that's your chipset series, I didn't look to see if that's what you set. |
|
Back to top |
|
|
paranode l33t
Joined: 06 Mar 2003 Posts: 679 Location: Texas
|
Posted: Wed Jun 11, 2003 3:02 pm Post subject: |
|
|
xfjsx wrote: | i have a radeon mobility U1 for my presario 900us laptop. so which do i want?
thanks! |
This card is not yet supported by DRM. I also have it in my laptop. _________________ Meh. |
|
Back to top |
|
|
dberkholz Retired Dev
Joined: 18 Mar 2003 Posts: 1008 Location: Minneapolis, MN, USA
|
Posted: Wed Jun 11, 2003 3:07 pm Post subject: |
|
|
paranode wrote: | xfjsx wrote: | i have a radeon mobility U1 for my presario 900us laptop. so which do i want?
thanks! |
This card is not yet supported by DRM. I also have it in my laptop. |
After a little more research, I found that as well. But here's a quote on driver progress as of March: Quote: | Just to let everyone know, there is an ATI developer working with the XFree86 team to write an accelerated driver for the U1/3*0M chips. So far, it's working pretty well. They still need to fix some bugs in the 2D acceleration and then begin work taking advantage of the 3D acceleration. But it is promising! |
http://216.239.33.100/search?q=cache:OUhuPjoProUJ:www.linuxcompatible.org/forums/viewtopic.php%3Ft%3D145%26view%3Dprevious+mobility+radeon+U1&hl=en&ie=UTF-8 |
|
Back to top |
|
|
paranode l33t
Joined: 06 Mar 2003 Posts: 679 Location: Texas
|
Posted: Thu Jun 12, 2003 2:25 am Post subject: |
|
|
I'm crossing my fingers! _________________ Meh. |
|
Back to top |
|
|
Parak n00b
Joined: 07 Jun 2003 Posts: 38
|
Posted: Sat Jun 14, 2003 5:01 pm Post subject: |
|
|
Ahh, finally got the dreaded nforce2/radeon combo working...sorta.
I patched the kernel agpgart with the nforce2 patch, emerged ati-drivers, switched opengl to use ati, loaded fglrx.o, used fglrx for the card driver in XF86Config-4 and had it use external agpgart. (I have a patch that adds nforce2 support into ati-drivers, but I have no idea how to apply it)
Now, startx brings up a screen that's really messed up (sort of like tv static) but I can see the bash prompts, type, and move the mouse around. glxinfo does list hardware acceleration enabled. If I kill X, and restart it, the monitor goes completely blank.
Thanks for any advice. |
|
Back to top |
|
|
samokk Tux's lil' helper
Joined: 13 Jun 2003 Posts: 116 Location: Paris, France
|
Posted: Sat Jun 14, 2003 6:20 pm Post subject: |
|
|
stustill wrote: |
Code: |
radeon -sis -rage128 -matrox -3dfx -gamma -i8x0
|
|
what are all these USE flags ?
I don't seem to find them in /usr/portage/profiles/use.desc
aren't all flags supposed to be listed here ?
Sam |
|
Back to top |
|
|
lucida Apprentice
Joined: 20 Feb 2003 Posts: 191
|
Posted: Sat Jun 14, 2003 7:03 pm Post subject: |
|
|
$ emerge -pv xfree-drm
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild U ] x11-base/xfree-drm-4.3.0 [4.3.0-r1] -3dfx -gamma -i8x0 -matrox -rage128 -radeon -sis
this is package specified use flags. |
|
Back to top |
|
|
stustill Guru
Joined: 25 Feb 2003 Posts: 333 Location: Aberdeen, Scotland
|
Posted: Sat Jun 14, 2003 10:38 pm Post subject: |
|
|
You can also find short descriptions of them in /usr/portage/profiles/use.local.desc
Stu |
|
Back to top |
|
|
samokk Tux's lil' helper
Joined: 13 Jun 2003 Posts: 116 Location: Paris, France
|
Posted: Sun Jun 15, 2003 9:00 am Post subject: |
|
|
stustill wrote: | You can also find short descriptions of them in /usr/portage/profiles/use.local.desc
Stu |
hmm, ok, thanks
last time I checked, there was like one or two things, so I forgot about it
but, are these flags somehow special ? can I use them exactly like normal flags, or I should use them the way they're described in local.desc :
x11-base/xfree-drm:radeon ?
thanks
Sam |
|
Back to top |
|
|
paranode l33t
Joined: 06 Mar 2003 Posts: 679 Location: Texas
|
Posted: Sun Jun 15, 2003 7:51 pm Post subject: |
|
|
All you need to do is add radeon to your USE flags. The other ones will then automatically be left out. _________________ Meh. |
|
Back to top |
|
|
crowbert Tux's lil' helper
Joined: 28 Apr 2003 Posts: 146
|
Posted: Mon Jun 16, 2003 6:29 pm Post subject: |
|
|
When setting USE flags, it's easiest to do 'emerge -pv {target}' and it will tell you what flags it's going to use. Then just adjust the ones that it's getting wrong by default before doing the emerge for real. |
|
Back to top |
|
|
tgz n00b
Joined: 14 Jun 2003 Posts: 10 Location: NYC
|
Posted: Tue Jun 17, 2003 7:13 pm Post subject: |
|
|
Hello everyone,
I have followed the directions in this sticky and am able to startx, I get a black screen with a small X that I can move around. When I left click I get a menu but the problem I am having is I cant close X with ctrl+alt+backspace. The only way I can close it is by left clicking and then choosing the exit option.
When I exit X I get this error message:(WW) RADEON(0): Failed to set up write-combining range (0x48000000,0x2000000)
When I do lsmod Radeon is running but it is not being used by anything. When I boot radeon is not autoloaded? I'm also not sure if my agpgart is running? |
|
Back to top |
|
|
paranode l33t
Joined: 06 Mar 2003 Posts: 679 Location: Texas
|
Posted: Tue Jun 17, 2003 8:15 pm Post subject: |
|
|
tgz wrote: | Hello everyone,
I have followed the directions in this sticky and am able to startx, I get a black screen with a small X that I can move around. When I left click I get a menu but the problem I am having is I cant close X with ctrl+alt+backspace. The only way I can close it is by left clicking and then choosing the exit option.
When I exit X I get this error message:(WW) RADEON(0): Failed to set up write-combining range (0x48000000,0x2000000)
When I do lsmod Radeon is running but it is not being used by anything. When I boot radeon is not autoloaded? I'm also not sure if my agpgart is running? |
If agpgart is a module then what does the output say? Is it autoloaded? If it's in the kernel, do Code: | dmesg | grep -i agp |
_________________ Meh. |
|
Back to top |
|
|
tgz n00b
Joined: 14 Jun 2003 Posts: 10 Location: NYC
|
Posted: Tue Jun 17, 2003 10:32 pm Post subject: |
|
|
Thanks for the reply, agpgart is in the kernel.
When I typed dmesg | grep -i agp I got this message:
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 256M @ 0x60000000
[drm] AGP 0.99 aperture @ 0x60000000 256MB |
|
Back to top |
|
|
dberkholz Retired Dev
Joined: 18 Mar 2003 Posts: 1008 Location: Minneapolis, MN, USA
|
Posted: Tue Jun 17, 2003 11:54 pm Post subject: |
|
|
Check your log for all error messages. They often give good clues what the problem may be, beyond the single error message you get at quitting X. Code: | # grep -e EE -e WW /var/log/XFree86.0.log |
|
|
Back to top |
|
|
tgz n00b
Joined: 14 Jun 2003 Posts: 10 Location: NYC
|
Posted: Wed Jun 18, 2003 12:27 am Post subject: |
|
|
Spyderous: here is what that command gave me....
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Loading extension MIT-SCREEN-SAVER
(WW) RADEON(0): Failed to set up write-combining range (0x48000000,0x2000000)
Any ideas?
Would you like to see my XF86Config ? |
|
Back to top |
|
|
Todda n00b
Joined: 13 Jun 2003 Posts: 22
|
Posted: Wed Jun 18, 2003 9:46 pm Post subject: |
|
|
Ok..first of all..thanks to all for the great posts..i have finally gotten my radeon working in x with GL support.
Now...everything seems to work great glxgears is giving me 2339fps, the GL screensavers work great, tuxracer works excellent, but some of my games won't run at anything higher than 640x480. When i try to change the resolution it craps out and leaves me sitting in a 640x480 desktop !?!?
Any ideas?
The game doing it the most is Vendetta.
Help |
|
Back to top |
|
|
propheci n00b
Joined: 08 Sep 2002 Posts: 72 Location: IL, USA
|
Posted: Wed Jun 18, 2003 9:59 pm Post subject: |
|
|
hi, i've followed the various directions in this thread but i'm still having trouble. here's roughly what i did. i have a radeon 9700 pro running on an intel 865.
1) compiled 2.4.20 kernel without DRM and DRI _but_ with AGPGART and MTTR. i built them into the kernel, not modules.
2) emerged ati-drivers and ran fglrxconfig
i checked over the generated XF86Config-4 and it includes the lines:
Code: | Load "glx"
Load "dri"
...
BusID "PCI:1:0:0" |
but when i startx, i get:
Code: | (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) fglrx(0): board is third party board
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP |
so i guess my question is why is it looking at PCI:1:0:1 even though XF86Config has PCI:1:0:0? and i don't know what the deal is with the AGP, didn't do that until just now. thx. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|