| View previous topic :: View next topic |
| Author |
Message |
thestick
Guru
Joined: 07 Apr 2006
Posts: 531
Location: /dev/urandom
|
 Posted: Thu Nov 30, 2006 1:21 pm Post subject: qt-mt not found [SOLVED] |
 |
|
emerging avahi
| Code: | checking for GLIB20... yes
checking for QT3... configure: error: Package requirements ( qt-mt >= 3.0.0 ) were not met:
No package 'qt-mt' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables QT3_CFLAGS
and QT3_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
!!! Please attach the following file when filing a report to bugs.gentoo.org:
!!! /var/tmp/portage/net-dns/avahi-0.6.15/work/avahi-0.6.15/config.log
!!! ERROR: net-dns/avahi-0.6.15 failed.
Call stack:
ebuild.sh, line 1568: Called dyn_compile
ebuild.sh, line 937: Called src_compile
avahi-0.6.15.ebuild, line 117: Called econf '--localstatedir=/var' '--with-distro=gentoo' '--disable-python-dbus' '--disable-pygtk' '--disable-xmltoman' '--disable-monodoc' '--enable-glib' '--disable-autoipd' '--disable-compat-libdns_sd' '--enable-compat-howl' '--disable-doxygen-doc' '--enable-mono' '--enable-dbus' '--enable-python' '--enable-gtk' '--enable-qt3' '--enable-qt4' '--enable-gdbm' '--enable-python-dbus' '--enable-pygtk'
ebuild.sh, line 540: Called die
|
...
| Code: |
emerge -pv avahi
[ebuild R ] net-dns/avahi-0.6.15 USE="dbus gdbm gtk* howl-compat mono python qt3* qt4* -autoipd -bookmarks -doc -mdnsresponder-compat" 0 kB
|
Last edited by thestick on Fri Dec 01, 2006 2:05 pm; edited 1 time in total |
|
| Back to top |
|
 |
DocReedSolomon
Guru
Joined: 28 Aug 2006
Posts: 419
|
| Posted: Thu Nov 30, 2006 1:40 pm Post subject: Re: qt-mt not found |
|
|
compiles fine here (using qt3 only), but i see the folllowing from your post:
| thestick wrote: |
| Code: |
emerge -pv avahi
[ebuild R ] net-dns/avahi-0.6.15 USE="dbus gdbm gtk* howl-compat mono python qt3* qt4* -autoipd -bookmarks -doc -mdnsresponder-compat" 0 kB
|
|
you recently added newsflags. what gives
emerge -pDv avahi?
looks like its time for an emerge -upDv --newuse world 
//edit: looks like you dont even have QT installed at all?
could that be? |
|
| Back to top |
|
|
thestick
Guru
Joined: 07 Apr 2006
Posts: 531
Location: /dev/urandom
|
| Posted: Thu Nov 30, 2006 7:57 pm Post subject: |
|
|
| Code: | ts / # emerge -pvD avahi
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] net-dns/avahi-0.6.15 USE="dbus gdbm gtk* howl-compat mono python qt3* qt4* -autoipd -bookmarks -doc -mdnsresponder-compat" 0 kB
|
| Code: |
[I] x11-libs/qt
Available versions:
(3) 3.3.4-r8 3.3.6-r1 (~)3.3.6-r2 3.3.6-r3 3.3.6-r4 (~)3.3.6-r5 (~)3.3.6-r5[2]
(4) 4.1.4-r2 (~)4.2.1 [M](~)4.2.1-r1
Installed versions: 3.3.6-r5(3)(00:10:07 11/30/06)(-cups -debug -doc -examples -firebird gif -immqt -immqt-bc -ipv6 -mysql nas -nis -odbc opengl -pertty -postgres -risky -sqlite -xinerama)
4.2.1(4)(21:28:37 11/25/06)(-accessibility -cups -debug -doc -examples -firebird gif glib -input_devices_wacom jpeg -mng -mysql nas -nis -odbc opengl pch png -postgres -sqlite -xinerama zlib)
Homepage: http://www.trolltech.com/
Description: The Qt toolkit is a comprehensive C++ application development framework.
|
i`m no noob , i tried my best fixing deps and shit. this is a bug . if any of you had it and know how to fix it ... please post
Last edited by thestick on Thu Nov 30, 2006 9:20 pm; edited 1 time in total |
|
| Back to top |
|
|
DocReedSolomon
Guru
Joined: 28 Aug 2006
Posts: 419
|
| Posted: Thu Nov 30, 2006 8:26 pm Post subject: |
|
|
your post is unreadable, please fix that first. its pretty hard to read.
do you have QT installed? yes/no?
do you need QT at all? yes/no?
answer those.
if you dont need QT emerge avahi without that flags.
and - no, this is not a bug.
anyway:
a) get your USEflags in order (make.conf)
b) re-emerge world (--newuse) |
|
| Back to top |
|
|
thestick
Guru
Joined: 07 Apr 2006
Posts: 531
Location: /dev/urandom
|
| Posted: Thu Nov 30, 2006 9:21 pm Post subject: |
|
|
i use kde(actually only X and kicker and kdesktop and kwin and a small script to login)
i have qt installed
i use qt
emerge -NpvD world tells me that
kdnsd-avahi needs to be installed
this requires avahi with qt3 use flag enabled
wich fails..
i tried recompiling avahi lots of time
i even recompilet qt3 a few times |
|
| Back to top |
|
|
DocReedSolomon
Guru
Joined: 28 Aug 2006
Posts: 419
|
| Posted: Fri Dec 01, 2006 1:58 pm Post subject: |
|
|
oh, so you didnt need "avahi" in the first place at all sofar?
what application is pulling this dependency in?
and what is "kdnsd-avahi"? i dont find this one in portage at all 
post the output of "emerge -upDv --newuse world" please. |
|
| Back to top |
|
|
thestick
Guru
Joined: 07 Apr 2006
Posts: 531
Location: /dev/urandom
|
| Posted: Fri Dec 01, 2006 2:05 pm Post subject: |
|
|
my bad
it is `kdnssd-avahi`
solved my problem adding
PKG_CONFIG_PATH="/usr/qt/3/lib/pkgconfig" to make.conf |
|
| Back to top |
|
|
DocReedSolomon
Guru
Joined: 28 Aug 2006
Posts: 419
|
| Posted: Fri Dec 01, 2006 3:16 pm Post subject: |
|
|
| thestick wrote: |
solved my problem adding
PKG_CONFIG_PATH="/usr/qt/3/lib/pkgconfig" to make.conf |
no, that should have never been the case in the 1st place to add this one manually. |
|
| Back to top |
|
|
thestick
Guru
Joined: 07 Apr 2006
Posts: 531
Location: /dev/urandom
|
| Posted: Fri Dec 01, 2006 6:28 pm Post subject: |
|
|
| yes .. i know , but it works |
|
| Back to top |
|
|
krisse
Guru
Joined: 15 Mar 2005
Posts: 325
Location: Sweden
|
| Posted: Mon May 19, 2008 11:35 am Post subject: |
|
|
| thestick wrote: | | yes .. i know , but it works |
This is actually still a problem. And the same solution still works.
QT installed and reinstalled.
| Code: | ~ $ eix -I x11-libs/qt
[I] x11-libs/qt
Available versions:
(3) 3.3.8-r4
(4) 4.3.3 ~4.3.4-r1 [M]~4.4.0
{+accessibility +qt3support cups dbus debug doc examples firebird gif glib immqt immqt-bc input_devices_wacom ipv6 jpeg mng mysql nas nis odbc opengl pch png postgres qt3support sqlite sqlite3 ssl tiff xinerama zlib}
Installed versions: 3.3.8-r4(3)(18.55.52 2008-05-15)(cups gif ipv6 mysql opengl -debug -doc -examples -firebird -immqt -immqt-bc -nas -nis -odbc -postgres -sqlite -xinerama)
4.3.3(4)(20.47.00 2008-05-15)(dbus gif jpeg opengl png ssl zlib -+accessibility -+qt3support -cups -debug -doc -examples -firebird -glib -input_devices_wacom -mng -mysql -nas -nis -odbc -pch -postgres -sqlite -sqlite3 -tiff -xinerama)
Homepage: http://www.trolltech.com/
Description: The Qt toolkit is a comprehensive C++ application development framework. |
Version of avahi to be installed
| Code: | ~ $ paludis -ip avahi
Building target list...
Building dependency list...
These packages will be installed:
* net-dns/avahi::gentoo [R 0.6.22-r1] <target>
Reasons: net-print/cups-1.3.7-r1:0::installed
-autoipd -bookmarks dbus -doc gdbm gtk -howl-compat ipv6 mdnsresponder-compat mono python qt3* qt4* -test kernel: (linux)
Total: 1 package (1 rebuild) |
Error mesage | Code: | configure: error: Package requirements ( qt-mt >= 3.0.0 ) were not met:
No package 'qt-mt' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables QT3_CFLAGS
and QT3_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
!!! ERROR in net-dns/avahi-0.6.22-r1:
!!! In econf at line 1812
!!! econf failed
!!! Call stack:
!!! * econf (/var/tmp/paludis/net-dns-avahi-0.6.22-r1/temp/loadsaveenv:1812)
!!! * src_compile (/var/tmp/paludis/net-dns-avahi-0.6.22-r1/temp/loadsaveenv:3975)
!!! * ebuild_f_compile (/usr/libexec/paludis/1/src_compile.bash:49)
!!! * ebuild_main (/usr/libexec/paludis/ebuild.bash:460)
!!! * main (/usr/libexec/paludis/ebuild.bash:479)
iefunc: making ebuild PID 22902 exit with error
die trap: exiting with error. |
Solution: insert into /etc/paludis/bashrc (or proper portage place) : | Code: | | export PKG_CONFIG_PATH="/usr/qt/3/lib/pkgconfig" |
Conf. & build of avahi successful.
More problems (caused be the "solution" above?):
Package kdnssd-avahi-0.1.2 gets pulled in as dependency, fails with the following: | Code: | checking for avahi-qt3 >= 0.4 ... Package qt-mt was not found in the pkg-config search pa
th. Perhaps you should add the directory containing `qt-mt.pc' to the PKG_CONFIG_PATH envi
ronment variable Package 'qt-mt', required by 'avahi-qt3', not found
Install error:
* In program /usr/bin/paludis (--log-level warning --dl-upgrade always --show-reasons su
mmary --dl-reinstall if-use-changed --dl-downgrade warning --with-unused-dependencies) -i1
kdnssd-avahi:
* When performing install action from command line:
* When executing install task:
* When installing 'kde-misc/kdnssd-avahi-0.1.2:0::gentoo':
* Install error: Install failed for 'kde-misc/kdnssd-avahi-0.1.2:0::gentoo'
|
Solution: same as above, PKG_CONFIG_PATH set and package was configured & installed without problems.
EDIT: Filed as bug 222803 |
|
| Back to top |
|
|
|
Desktop Environments
