3PO
Veteran
Joined: 26 Nov 2006
Posts: 1110
Location: Schwabenländle
|
 Posted: Sun Dec 03, 2006 10:05 am Post subject: X11 mit intel 845gv Chipsatz? |
 |
|
Hallo Zusammen,
Ich habe mal Gentoo 2006.1 auf meinem MSI Hermes 845gv-lite installiert, - was soweit auch problemlos durchlief.
Nun wollte ich ich noch mit einem:
KDE 3.5.5 installieren. Auch das lief noch, bis auf ein paar Kleinigkeiten, problemlos.
Dann fingen die Probleme an. Ich wollte mit:konfigurieren, aber da kam schon der erste Fehler:
| Code: | Gentoo ~ # xorgcfg
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-gentoo-r3 i686
Current Operating System: Linux Gentoo 2.6.18-gentoo-r3 #1 SMP Sun Nov 26 10:17:04 UTC 2006 i686
Build Date: 01 December 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.8.log", Time: Sun Dec 3 11:30:27 2006
List of video drivers:
ark
tseng
imstt
v4l
s3virge
vmware
nv
neomagic
i740
i128
siliconmotion
dummy
voodoo
apm
i810
trident
cirrus
mga
sisusb
savage
chips
via
nsc
rendition
glint
tga
s3
cyrix
tdfx
sis
fbdev
vesa
vga
(++) Using config file: "/root/xorg.conf.new"
Xorg is not able to detect your mouse.
Edit the file and correct the Device.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new'
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-gentoo-r3 i686
Current Operating System: Linux Gentoo 2.6.18-gentoo-r3 #1 SMP Sun Nov 26 10:17:04 UTC 2006 i686
Build Date: 01 December 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.8.log", Time: Sun Dec 3 11:30:28 2006
(++) Using config file: "/root/xorg.conf.new"
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(1920x1440,Monitor0) mode clock 234MHz exceeds DDC maximum 210MHz
(EE) I810(0): Failed to allocate framebuffer. Is your VideoRAM set too low ??
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Cannot connect to X server.
Gentoo ~ # |
...und hier noch der Inhalt der /var/log/Xorg.0.log
| Code: |
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-gentoo-r3 i686
Current Operating System: Linux Gentoo 2.6.18-gentoo-r3 #1 SMP Sun Nov 26 10:17:04 UTC 2006 i686
Build Date: 01 December 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 3 10:54:32 2006
(==) Using config file: "/etc/X11/xorg.conf"
Data incomplete in file /etc/X11/xorg.conf
Undefined Screen "Screen0" referenced by ServerLayout "X.org Configured".
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
|
...und hier noch die /var/log/Xorg.8.log(nur die letzten Zeilen):
| Code: | [43] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[44] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Brookdale-G Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Brookdale-G Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(--) I810(0): Xv is disabled because it needs 2D accel and AGPGART.
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 384 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 8640 kByte
(EE) I810(0): Failed to allocate framebuffer. Is your VideoRAM set too low ??
Fatal server error:
AddScreen/ScreenInit failed for driver 0 |
|
|
Deutsches Forum (German)
