| View previous topic :: View next topic |
| Author |
Message |
RageX^NZ
n00b
Joined: 26 May 2003
Posts: 58
Location: Mount Maunganui, NEW ZEALAND
|
 Posted: Sun Dec 10, 2006 4:15 am Post subject: Pioneer pata DVD-RW not detected by libata in 2.6.18 |
 |
|
Hello fellow Gentooists.
I have a Pioner DVR-110 DVD-RW Drive, it has been working fantastically with 2.6.17 using libata's support for PATA on Intel ICH chipsets using the piixn libata driver. However I recently moved to 2.6.18-gentoo-r4 using the same kernel config it now does not detect it properly and udev does not create a device.
The hard disk attached to the sata port on the Piix work great, but the DVD-RW seems to be timing out, well thats what it looks like to me.
Does anyone know what causes this and how to remedy it ? Any help is most appreciated.
The dmesg output is:
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
scsi0 : ata_piix
ata1.00: ATA-6, max UDMA/133, 72301727 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
Vendor: ATA Model: WDC WD360GD-00FN Rev: 35.0
Type: Direct-Access ANSI SCSI revision: 05
input: AT Translated Set 2 keyboard as /class/input/input0
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/66
ata2.00: configured for UDMA/66
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x24)
ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/66
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x24)
ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/66
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x24)
ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/66
ata2: EH complete
ata2.00: limiting speed to UDMA/44
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x24)
ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/44
ata2: EH complete
SCSI device sda: 72301727 512-byte hdwr sectors (37018 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 72301727 512-byte hdwr sectors (37018 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda |
|
| Back to top |
|
 |
mikers456
n00b
Joined: 07 Jul 2004
Posts: 36
|
| Posted: Sun Dec 10, 2006 5:57 pm Post subject: |
|
|
No idea how the libata driver supports pata (I thought it didn't)
Maybe try forcing the DVD drive to use a slower rate rate (33 Mhz) -- 66 might be too high.
Are you using a 80 pin cable for the DVD?
What does hdparm -I /dev/[drive giving problems] say in older kernel? |
|
| Back to top |
|
|
RageX^NZ
n00b
Joined: 26 May 2003
Posts: 58
Location: Mount Maunganui, NEW ZEALAND
|
| Posted: Sun Dec 10, 2006 6:03 pm Post subject: |
|
|
Thanks Mikers, I have discovered that the issue is a bug in the libata pata support handling in 2.6.18/19 and that they are working on it now! Hopefully they fix it soon.
For now I am going to roll back to 2.6.17 |
|
| Back to top |
|
|
pa1983
Tux's lil' helper
Joined: 09 Jan 2004
Posts: 101
|
| Posted: Tue Dec 19, 2006 10:08 pm Post subject: |
|
|
I seem to have a simialr problem. I was runing 2.6.17 or 2.6.18 dont remember exaktly. I have built a software raid5 server whit gentoo. Seemd to work. But I uppgraded to 2.619 becus of the hotplug support. That works. i have hotswap bays for my sata disks. But I get similar errors like you and the raid aray always kicks out my tird disk, sdd1 whit similar error mesages. So I have to do a recovery of the aray. I will try 2.6.17 and see if that work. i cant hotswap the disks then what I knwo but can live whit that until a fix coms in a new kernel.
The disk passes DFT test program thet do extensiv testing of the disk and no HW failure on the electronics or hardware os sectors on the disk that it can detect and S.M.A.R.T status is good.
| Code: |
Dec 19 22:42:10 Alpha ata4: failed to read log page 10h (errno=-2)
Dec 19 22:42:10 Alpha ata4.00: exception Emask 0x1 SAct 0x7 SErr 0x280000 action
0x0
Dec 19 22:42:10 Alpha ata4.00: (irq_stat 0x03020002, device error via SDB FIS)
Dec 19 22:42:10 Alpha ata4.00: tag 0 cmd 0x60 Emask 0x1 stat 0x50 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 1 cmd 0x60 Emask 0x1 stat 0x50 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 2 cmd 0x60 Emask 0x1 stat 0x50 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4: EH complete
Dec 19 22:42:10 Alpha SCSI device sdd: 625142448 512-byte hdwr sectors (320073 M
B)
Dec 19 22:42:10 Alpha sdd: Write Protect is off
Dec 19 22:42:10 Alpha sdd: Mode Sense: 00 3a 00 00
Dec 19 22:42:10 Alpha SCSI device sdd: drive cache: write back
Dec 19 22:42:10 Alpha ata4: failed to read log page 10h (errno=-2)
Dec 19 22:42:10 Alpha ata4.00: exception Emask 0x1 SAct 0x1fff SErr 0x280000 act
ion 0x0
Dec 19 22:42:10 Alpha ata4.00: (irq_stat 0x01060002, device error via SDB FIS)
Dec 19 22:42:10 Alpha ata4.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 2 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 3 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 4 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 5 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 6 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 7 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 8 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 9 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 10 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devi
ce error)
Dec 19 22:42:10 Alpha ata4.00: tag 11 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devi
ce error)
Dec 19 22:42:10 Alpha ata4.00: tag 12 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devi
ce error)
Dec 19 22:42:10 Alpha ata4: EH complete
Dec 19 22:42:10 Alpha SCSI device sdd: 625142448 512-byte hdwr sectors (320073 M
B)
Dec 19 22:42:10 Alpha sdd: Write Protect is off
Dec 19 22:42:10 Alpha sdd: Mode Sense: 00 3a 00 00
Dec 19 22:42:10 Alpha SCSI device sdd: drive cache: write back
Dec 19 22:42:10 Alpha ata4: failed to read log page 10h (errno=-2)
Dec 19 22:42:10 Alpha ata4.00: exception Emask 0x1 SAct 0x1ffe SErr 0x280000 act
ion 0x0
Dec 19 22:42:10 Alpha ata4.00: (irq_stat 0x03060002, device error via SDB FIS)
Dec 19 22:42:10 Alpha ata4.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 2 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 3 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 4 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 5 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 6 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 7 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 8 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 9 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devic
e error)
Dec 19 22:42:10 Alpha ata4.00: tag 10 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devi
ce error)
Dec 19 22:42:10 Alpha ata4.00: tag 11 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devi
ce error)
Dec 19 22:42:10 Alpha ata4.00: tag 12 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (devi
ce error)
|
and so it continues
_________________
NAS: i3 4360 3.7Ghz, 20Gb ram, 256Gb SSD, 65Tb HDD, NIC: Intel 2x1Gbit, Realtek 2.5Gbit
ROUTER: J1900 2Ghz, 8Gb ram, 128Gb SSD, NIC: 2x1Gbit, WIFI: Atheros AR9462 and AR5005G |
|
| Back to top |
|
|
pa1983
Tux's lil' helper
Joined: 09 Jan 2004
Posts: 101
|
| Posted: Thu Dec 21, 2006 11:45 am Post subject: |
|
|
2.6.17 failed to compile on my alpha machine so I downloaded 2.6.20-rc1. haven't had any problems so fare. uploaded about 22Gb none stop to it whit out any problems. I use a sil3124 PCI X controller. my radi 5 aray hade a read speed of about 35Mb/sec or so in hdparm but now its up to 57-46Mb/sec 
Dont know if that only was a performance boos on this controller or something that will help any controller or raid array.
Wort trying!
_________________
NAS: i3 4360 3.7Ghz, 20Gb ram, 256Gb SSD, 65Tb HDD, NIC: Intel 2x1Gbit, Realtek 2.5Gbit
ROUTER: J1900 2Ghz, 8Gb ram, 128Gb SSD, NIC: 2x1Gbit, WIFI: Atheros AR9462 and AR5005G |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
