| View previous topic :: View next topic |
| Author |
Message |
andi456
Apprentice
Joined: 06 Mar 2005
Posts: 226
Location: Germany
|
 Posted: Wed Jan 10, 2007 2:58 pm Post subject: [gelöst] ipw2100 1.2.1 + wpa_supplicant 0.5.6 ->keine Ve |
 |
|
Tach zusammen,
beim Versuch eine Verbindung mit einem Alice W-Gate WLAN-Router mit WPA2-Verschlüsselung herzustellen, scheitert der Verbindungsaufbau schon sehr früh:
| Code: |
Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=1
Priority group 5
id=0 ssid='Alice-14021694'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:0c:f1:0a:1f:7b
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface eth1
Daemonize..
* Starting wpa_cli on eth1 ... [ ok ]
* Failed to configure eth1 in the background
|
Meine Konfiguration sieht, wie folgt, aus:
/etc/conf.d/net:
| Code: |
config_eth1=( "dhcp" )
modules_eth1=( "wpa_supplicant" )
wpa_supplicant_eth1="-Dwext -d"
|
/etc/wpa_supplicant/wpa_supplicant.conf:
| Code: |
ctrl_interface=/var/run/wpa_supplicant
#ctrl_interface_group=0
#eapol_version=1
#ap_scan=2
fast_reauth=1
network={
ssid="Alice-14021694"
scan_ssid=1
# proto=WPA RSN
proto=WPA2
key_mgmt=WPA-PSK
psk="xxxxxxxxxxxxxxxx"
pairwise=CCMP TKIP
group=CCMP TKIP
priority=5
}
|
Hab' schon alle möglichen Einstellungen ausprobiert, jedoch bisher keine passenden gefunden. Insbesondere hab' ich mit ap_scan herumgespielt, hat aber immer denselben Effekt gezeitigt. Wäre spitze, wenn mir jemand weiterhelfen könnte.
Gruß Andreas
Last edited by andi456 on Sun Feb 04, 2007 3:12 pm; edited 1 time in total |
|
| Back to top |
|
 |
andi456
Apprentice
Joined: 06 Mar 2005
Posts: 226
Location: Germany
|
| Posted: Sun Feb 04, 2007 3:11 pm Post subject: |
|
|
Ok, hat sich erledigt, war ein Konfigurationsproblem, das darin bestand, dass ich die psk-passphrase ohne Leerzeichen angeben musste.
Gruß Andreas |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
