Problems with OpenGL rendering (enabled but slow)

MasterMind

I almost tried everything that I found! I supect that the problem is in MTRR, but the thing is, I can't switch it from Continous to Discrete in BIOS. Even after BIOS update, there is no improvment.

My system:

Have ASUS M2NPV-VM with NForce 430 and NVIDIA GeForce 6150.

francl /home/mastermind # cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 2
cpu MHz : 2004.491
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy
bogomips : 4013.64
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 2
cpu MHz : 2004.491
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy
bogomips : 4008.43
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

nvidia-drivers : 1.0.9746

francl /home/mastermind # cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1
reg01: base=0x3df00000 ( 991MB), size= 1MB: uncachable, count=1

francl /home/mastermind # cat /proc/interrupts
CPU0 CPU1
0: 236 112298 IO-APIC-edge timer
1: 0 2 IO-APIC-edge i8042
8: 0 1 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 0 3 IO-APIC-edge i8042
14: 35 16024 IO-APIC-edge ide0
15: 10 3824 IO-APIC-edge ide1
16: 55 25243 IO-APIC-fasteoi nvidia
20: 0 5 IO-APIC-fasteoi ehci_hcd:usb1
21: 0 0 IO-APIC-fasteoi libata
22: 40 21536 IO-APIC-fasteoi libata, HDA Intel
23: 99 64323 IO-APIC-fasteoi ohci_hcd:usb2, eth0
NMI: 477 444
LOC: 112475 112455
ERR: 0

I have no more ideas what to do

.
_________________
Want the best subtitles?

Podnapisi.NET, we support only quality!

loftwyr · Posted: Thu Jan 11, 2007 11:39 pm Post subject:

what does

MasterMind · Posted: Fri Jan 12, 2007 5:50 am Post subject:

As I said... GLX is enabled and version is 1.0.9746 and it's direct (direct rendering: Yes). But slower than my previous system. (P4 1.9 GHz and GeForce 5700 FX LE)

cheers
_________________
Want the best subtitles?

Podnapisi.NET, we support only quality!

loftwyr · Posted: Fri Jan 12, 2007 5:11 pm Post subject:

How much slower is it? What are you using to measure the speed?

Check to make sure things like sync to vblank aren't on or that you're using a higher level of FSAA.
_________________
My emerge --info
Have you run revdep-rebuild lately? It's in gentoolkit and it's worth a shot if things don't work well.
Celebrating 5 years of Gentoo-ing.

MasterMind · Posted: Fri Jan 12, 2007 5:23 pm Post subject:

Playing WoW, FPS is lower (at some moments it's drops to 3 or even lower). Using Qt 4 OpenGL renderer works very slow and also Beryl works like s***. Have no FSAA or any other thing enabled.
_________________
Want the best subtitles?

Podnapisi.NET, we support only quality!