View previous topic :: View next topic |
Author |
Message |
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Sun Dec 24, 2006 12:24 pm Post subject: Udev-103's zerstört Netzanbindung - Ndiswrapper Wlan0 |
|
|
Udev-103's
Coldplug implementation hat irgendwie mein wlan zerschossen
kein dev wlan0
mod ndiswrapper ist geladen
So ein Müll .
Genauere Auszüge aus Log's usw mangels Netzanbindung derzeit nicht möglich.
Weiß von euch einer da was? _________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Sun Dec 24, 2006 1:40 pm Post subject: |
|
|
Bin jetzt mit dem Labtop ins Büro - eth - Lan tut also
Nur WLAN ....grrr und das zu Weihnachten
Ok also beim einstecken des DLW-G122 B1
var/log/messages:
Code: | Dec 24 14:25:48 localhost usb 2-1: new full speed USB device using uhci_hcd and address 9
Dec 24 14:25:48 localhost udevd[4596]: udev_event_run: seq 872 forked, pid [11970], 'add' 'usb', 0 seconds old
Dec 24 14:25:48 localhost usb 2-1: configuration #1 chosen from 1 choice
Dec 24 14:25:48 localhost udevd-event[11970]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/bus' appeared after 0 loops
Dec 24 14:25:48 localhost udevd-event[11970]: run_program: '/sbin/modprobe '
Dec 24 14:25:49 localhost udevd-event[11970]: run_program: '/sbin/modprobe' (stderr) 'FATAL: Module not found.'
Dec 24 14:25:49 localhost udevd-event[11970]: run_program: '/sbin/modprobe' returned with status 1
Dec 24 14:25:49 localhost udevd-event[11970]: run_program: 'udev_run_hotplugd usb'
Dec 24 14:25:49 localhost udevd-event[11970]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0
Dec 24 14:25:49 localhost udevd-event[11970]: run_program: 'udev_run_devd usb'
Dec 24 14:25:49 localhost udevd-event[11970]: run_program: '/lib/udev/udev_run_devd' returned with status 0
Dec 24 14:25:49 localhost udevd-event[11970]: pass_env_to_socket: passed 201 bytes to socket '/org/kernel/udev/monitor',
Dec 24 14:25:49 localhost udevd-event[11970]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',
Dec 24 14:25:49 localhost udevd-event[11970]: udev_event_run: seq 872 finished
Dec 24 14:25:49 localhost udevd[4596]: udev_done: seq 872, pid [11970] exit with 1, 1 seconds old
Dec 24 14:25:49 localhost udevd[4596]: udev_event_run: seq 873 forked, pid [11981], 'add' 'usb', 1 seconds old
Dec 24 14:25:49 localhost udevd-event[11981]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/bus' appeared after 0 lo
Dec 24 14:25:49 localhost udevd-event[11981]: run_program: '/sbin/modprobe usb:v2001p3C00d0001dc00dsc00dp00icFFiscFFipFF'
Dec 24 14:25:49 localhost udevd-event[11981]: run_program: '/sbin/modprobe' (stderr) 'FATAL: Module usb:v2001p3C00d0001dc00dsc00dp00icFFiscFFipFF
Dec 24 14:25:49 localhost udevd-event[11981]: run_program: '/sbin/modprobe' returned with status 1
Dec 24 14:25:49 localhost udevd-event[11981]: run_program: 'udev_run_hotplugd usb'
Dec 24 14:25:50 localhost udevd-event[11981]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0
Dec 24 14:25:50 localhost udevd-event[11981]: run_program: 'udev_run_devd usb'
Dec 24 14:25:50 localhost udevd-event[11981]: run_program: '/lib/udev/udev_run_devd' returned with status 0
Dec 24 14:25:50 localhost udevd-event[11981]: pass_env_to_socket: passed 325 bytes to socket '/org/kernel/udev/monitor',
Dec 24 14:25:50 localhost udevd-event[11981]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',
Dec 24 14:25:50 localhost udevd-event[11981]: udev_event_run: seq 873 finished
Dec 24 14:25:50 localhost udevd[4596]: udev_done: seq 873, pid [11981] exit with 1, 2 seconds old
Dec 24 14:25:50 localhost udevd[4596]: udev_event_run: seq 874 forked, pid [12000], 'add' 'usb_device', 2 seconds old
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/bin/sh -c 'K=usbdev2.9; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/bin/sh' (stdout) 'bus/usb/002/009'
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/bin/sh' returned with status 0
Dec 24 14:25:50 localhost udevd-event[12000]: udev_rules_get_name: rule applied, 'usbdev2.9' becomes 'bus/usb/002/009'
Dec 24 14:25:50 localhost udevd-event[12000]: udev_db_get_device: no db file to read /dev/.udev/db/class@usb_device@usbdev2.9: No such file or dir
Dec 24 14:25:50 localhost udevd-event[12000]: udev_node_add: creating device node '/dev/bus/usb/002/009', major = '189', minor = '136', mode = '06
'0', gid = '0'
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/sbin/modprobe '
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/sbin/modprobe' (stderr) 'FATAL: Module not found.'
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/sbin/modprobe' returned with status 1
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: 'udev_run_hotplugd usb_device'
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: 'udev_run_devd usb_device'
Dec 24 14:25:50 localhost udevd-event[12000]: run_program: '/lib/udev/udev_run_devd' returned with status 0
Dec 24 14:25:50 localhost udevd-event[12000]: pass_env_to_socket: passed 272 bytes to socket '/org/kernel/udev/monitor',
Dec 24 14:25:50 localhost udevd-event[12000]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',
Dec 24 14:25:50 localhost udevd-event[12000]: udev_event_run: seq 874 finished
Dec 24 14:25:50 localhost udevd[4596]: udev_done: seq 874, pid [12000] exit with 1, 2 seconds old
|
und
# udevmonitor --env
Code: | UEVENT[1166966748.959950] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1
SUBSYSTEM=usb
SEQNUM=872
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
UEVENT[1166966748.962712] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
SUBSYSTEM=usb
SEQNUM=873
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/009
PRODUCT=2001/3c00/1
TYPE=0/0/0
INTERFACE=255/255/255
MODALIAS=usb:v2001p3C00d0001dc00dsc00dp00icFFiscFFipFF
UEVENT[1166966748.962798] add@/class/usb_device/usbdev2.9
ACTION=add
DEVPATH=/class/usb_device/usbdev2.9
SUBSYSTEM=usb_device
SEQNUM=874
PHYSDEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
MAJOR=189
MINOR=136
UDEV [1166966749.031924] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1
UDEV_LOG=6
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1
SUBSYSTEM=usb
SEQNUM=872
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
UDEVD_EVENT=1
DRIVER=usb
UDEV [1166966750.011770] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
UDEV_LOG=6
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
SUBSYSTEM=usb
SEQNUM=873
PHYSDEVBUS=usb
DEVICE=/proc/bus/usb/002/009
PRODUCT=2001/3c00/1
TYPE=0/0/0
INTERFACE=255/255/255
MODALIAS=usb:v2001p3C00d0001dc00dsc00dp00icFFiscFFipFF
UDEVD_EVENT=1
UDEV [1166966750.075317] add@/class/usb_device/usbdev2.9
UDEV_LOG=6
ACTION=add
DEVPATH=/class/usb_device/usbdev2.9
SUBSYSTEM=usb_device
SEQNUM=874
PHYSDEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1
PHYSDEVBUS=usb
PHYSDEVDRIVER=usb
MAJOR=189
MINOR=136
UDEVD_EVENT=1
DEVNAME=/dev/bus/usb/002/009
|
_________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
smg Veteran
Joined: 13 Aug 2004 Posts: 1402 Location: /home/stephan
|
Posted: Sun Dec 24, 2006 1:41 pm Post subject: |
|
|
Ich kann dir zwar keine Lösung geben, aber geh doch einfach auf das alte Udev mit Coldplug zurück und recherchiere in der Zeit dann mal nach deinem Problem im Netz! _________________ GnuPG-Key-ID: 0xF8C275D4
Fingerprint: 5B6F 134A 189B A24D 342B 0961 8D4B 0230 F8C2 75D4
Code: | perl -WTe '($")=$/;print qq(@{[reverse('0'..'100')]}$/BOOM!$/);' |
|
|
Back to top |
|
|
STiGMaTa_ch Veteran
Joined: 28 Dec 2004 Posts: 1686 Location: Rüti ZH / Schweiz
|
Posted: Sun Dec 24, 2006 3:25 pm Post subject: |
|
|
Hast du nur udev oder auch andere Teile deines Systemes geupdated (z.B. den Kernel?)? Wenn ja, hast du danach - je nachdem - die module für wlan neu kompiliert (keine Ahnung ob dein Wireless direkt vom Kernel unterstützt wird oder ob du mittels ndiswrapper arbeiten musst.)? Hast du etc-update und revdep-rebuild durchgeführt?
Lieber Gruss
STiGMaTa _________________ Ich bin Schuldknappe. Das bedeutet ich bin immer an allem Schuld. Und das nicht zu knapp! | Der alltägliche Familienwahnsinn auf meinem BLOG |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Sun Dec 24, 2006 5:04 pm Post subject: |
|
|
Quote: | Hast du nur udev oder auch andere Teile deines Systemes geupdated... |
upgedatet wurden einige Packete aber soviel ich das gesehen hab nicht's Netzwerk relevantes.
Kernel wurde noch nicht upgedatet (vieleicht sollte ich das auch noch machen)
ndiswrapper ist der alte
_________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Sun Dec 24, 2006 5:06 pm Post subject: |
|
|
smg wrote: | ...aber geh doch einfach auf das alte Udev mit Coldplug zurück und recherchiere in der Zeit dann mal nach deinem Problem im Netz! |
altes Udev plus coldplug
Nur wenn gar nichts anderes hilft, aber das ist ja eigentlich keine Lösung. _________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
smg Veteran
Joined: 13 Aug 2004 Posts: 1402 Location: /home/stephan
|
Posted: Sun Dec 24, 2006 5:56 pm Post subject: |
|
|
artbody wrote: | smg wrote: | ...aber geh doch einfach auf das alte Udev mit Coldplug zurück und recherchiere in der Zeit dann mal nach deinem Problem im Netz! |
altes Udev plus coldplug
Nur wenn gar nichts anderes hilft, aber das ist ja eigentlich keine Lösung. |
Genau, deswegen habe ich auch geschrieben, dass es keine Lösung ist, das hast du aber intelligenterweise weggequotet. _________________ GnuPG-Key-ID: 0xF8C275D4
Fingerprint: 5B6F 134A 189B A24D 342B 0961 8D4B 0230 F8C2 75D4
Code: | perl -WTe '($")=$/;print qq(@{[reverse('0'..'100')]}$/BOOM!$/);' |
|
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Mon Dec 25, 2006 10:43 am Post subject: |
|
|
sorry für's weggepostete
_________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Mon Dec 25, 2006 3:52 pm Post subject: |
|
|
Hab jetzt auch den Kernel upgedatet
2.6.18-gentoo-r4
ein emerge ndiswrapper
aber immer noch kein device wlan0
_________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
STiGMaTa_ch Veteran
Joined: 28 Dec 2004 Posts: 1686 Location: Rüti ZH / Schweiz
|
Posted: Mon Dec 25, 2006 10:43 pm Post subject: |
|
|
STiGMaTa_ch wrote: | Hast du etc-update und revdep-rebuild durchgeführt? |
Das hast du mir noch nicht beantwortet...
Frohe Weihnacht
STiGMaTa _________________ Ich bin Schuldknappe. Das bedeutet ich bin immer an allem Schuld. Und das nicht zu knapp! | Der alltägliche Familienwahnsinn auf meinem BLOG |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Mon Dec 25, 2006 11:22 pm Post subject: |
|
|
etc-update ja
revdep nein
läuft also jetzt gerade
-> gtkglarea
Nein kein positives Ergebnis
immer noch kein dev wlan0 _________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Wed Dec 27, 2006 3:06 pm Post subject: |
|
|
Hab gerade mal das udev doc in Durchlesung
u.a.
http://www.reactivated.net/writing_udev_rules.html
aber
in
Code: | /sys/class/net/
eth0
lo |
kein wlan0
auch ein
Code: | #udevcontrol reload_rules |
bringt NICHTS _________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
firefly Watchman
Joined: 31 Oct 2002 Posts: 5281
|
Posted: Wed Dec 27, 2006 4:46 pm Post subject: |
|
|
öhm wird ndiswrapper überhaupt geladen?
Und wenn ja, steht irgentetwas in der dmesg-ausgabe von ndiswrapper? _________________ Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Fri Dec 29, 2006 3:44 pm Post subject: |
|
|
ndiswrapper habe ich in /etc/modules.autoload.d/kernel-2.6 beim booten drin
Code: | # lsmod
Module Size Used by
radeon 93088 2
drm 46868 3 radeon
rtc 9652 0
ndiswrapper 112884 0 |
dmesg Ausgabe nach einem Ein und Ausstecken des USB-Wlansticks
Code: |
#dmesg
...
usb 2-1: USB disconnect, address 8
usb 2-1: new full speed USB device using uhci_hcd and address 9
usb 2-1: configuration #1 chosen from 1 choice |
Code: | #usbview
802.11g WLAN Adapter
Manufacturer: ANI
Speed: 12Mb/s (full)
USB Version: 2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 2001
Product Id: 3c00
Revision Number: 0.01
Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 300mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms |
Code: | # udevmonitor
udevmonitor prints the received event from the kernel [UEVENT]
and the event which udev sends out after rule processing [UDEV]
UEVENT[1167406880.790318] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.9_ep81
UDEV [1167406880.790318] remove@/class/usb_device/usbdev2.9
UEVENT[1167406880.790440] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.9_ep01
UEVENT[1167406880.790462] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
UEVENT[1167406880.790482] remove@/class/usb_device/usbdev2.9
UEVENT[1167406880.790502] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/usbdev2.9_ep00
UEVENT[1167406880.790522] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1
UDEV [1167406880.820215] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.9_ep81
UDEV [1167406880.862649] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.9_ep01
UDEV [1167406880.895269] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/usbdev2.9_ep00
UDEV [1167406880.904059] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
UDEV [1167406880.938214] remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-1
UEVENT[1167406884.431000] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1
UEVENT[1167406884.431475] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/usbdev2.10_ep00
UEVENT[1167406884.431730] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
UEVENT[1167406884.431969] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.10_ep81
UEVENT[1167406884.432212] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.10_ep01
UEVENT[1167406884.432453] add@/class/usb_device/usbdev2.10
UDEV [1167406884.523309] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1
UDEV [1167406885.003484] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/usbdev2.10_ep00
UDEV [1167406885.181216] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
UDEV [1167406885.181866] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.10_ep01
UDEV [1167406885.203706] add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/usbdev2.10_ep81
UDEV [1167406885.260854] add@/class/usb_device/usbdev2.10
|
_________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Wed Jan 10, 2007 8:33 am Post subject: |
|
|
wlan geht immer noch nicht
hat niemand ne Idee an was das noch liegen kann _________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Sat Jan 13, 2007 12:52 pm Post subject: |
|
|
artbody wrote: | wlan geht immer noch nicht
hat niemand ne Idee an was das noch liegen kann |
irgendwie wird das dev wlan0 nicht erzeugt _________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
firefly Watchman
Joined: 31 Oct 2002 Posts: 5281
|
Posted: Sat Jan 13, 2007 4:46 pm Post subject: |
|
|
was sagt denn ndiswrapper -l (oder wie das kommando heist, um sich die installierten ndis-treiber anzeigen zu lassen) _________________ Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Sun Jan 21, 2007 1:37 pm Post subject: |
|
|
Naja gibt nen invalid driver
Code: |
#ndiswrapper -l
installed drivers :
modules.ndiswrapper invalid driver
netrtusb driver installed, hardware (2001:3C00) present
|
_________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
firefly Watchman
Joined: 31 Oct 2002 Posts: 5281
|
Posted: Sun Jan 21, 2007 2:08 pm Post subject: |
|
|
naja das sollte doch normalerweise nicht sein oder? _________________ Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Sun Jan 21, 2007 2:22 pm Post subject: |
|
|
ne das ist nicht normal
aber vor udev1.0.* hat es normal gefunkt und jetzt nichts mehr.
momentan läuft aber ein emerge -uDN world und ndiswrapper ist da mit auf der Liste
ich werde den update also mal abwarten und dann nochmal testen. _________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
firefly Watchman
Joined: 31 Oct 2002 Posts: 5281
|
Posted: Sun Jan 21, 2007 2:33 pm Post subject: |
|
|
artbody wrote: | ne das ist nicht normal
aber vor udev1.0.* hat es normal gefunkt und jetzt nichts mehr.
momentan läuft aber ein emerge -uDN world und ndiswrapper ist da mit auf der Liste
ich werde den update also mal abwarten und dann nochmal testen. |
Nur weil es vorher funktioniert hat, muss es nicht heißen, das es nicht daran liegt. _________________ Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
Back to top |
|
|
artbody Guru
Joined: 15 Sep 2006 Posts: 494 Location: LB
|
Posted: Wed Jan 24, 2007 9:47 pm Post subject: |
|
|
es hat solange gefunkt, bis udev 1.0.3
danach wars vorbei.
usbview
Code: | 802.11g WLAN Adapter
Manufacturer: ANI
Speed: 12Mb/s (full)
USB Version: 2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 2001
Product Id: 3c00
Revision Number: 0.01
Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 300mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms |
Code: | localhost ~ # modprobe ndiswrapper
localhost ~ # ndiswrapper -l
netrtusb : driver installed
device (2001:3C00) present
localhost ~ # iwlist wlan0 scan
wlan0 Interface doesn't support scanning.
localhost ~ # /etc/init.d/net.wlan0 restart
* Starting wlan0
* Bringing up wlan0
* 192.168.144.12/24
* network interface wlan0 does not exist
* Please verify hardware or kernel module (driver) [ !! ]
localhost ~ #
|
_________________ Never give up
WM : E16 the true enlightenment
achim |
|
Back to top |
|
|
firefly Watchman
Joined: 31 Oct 2002 Posts: 5281
|
Posted: Wed Jan 24, 2007 11:36 pm Post subject: |
|
|
ja und? Ich würde trotzdem erstmal dafür sorgen, das die "invalid driver" Meldung von ndiswrapper weg ist. Denn es kann gut sein, das udev bzw ndiswrapper da jetzt etwas sensibler reagiert. _________________ Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn.
Last edited by firefly on Wed Jan 24, 2007 11:41 pm; edited 1 time in total |
|
Back to top |
|
|
forrestfunk81 Guru
Joined: 07 Feb 2006 Posts: 567 Location: münchen.de
|
Posted: Wed Jan 24, 2007 11:41 pm Post subject: |
|
|
Hi,
was meinst du eigtl mit "dev wlan"? /dev/wlan oder /dev/wlan0 ?? das soll doch auch gar nicht erzeugt werden. Außerdem, so wie ich das /var/log/messages von ganz oben interpretiere ist das kein udev error oder? Die Device Nodes werden ja angelegt (file '/sys/devices/...' appeared..), nur beim Modul laden gibts Errors (FATAL: Module not found). Oder seh ich das falsch?
artbody wrote: | Naja gibt nen invalid driver
Code: |
#ndiswrapper -l
installed drivers :
modules.ndiswrapper invalid driver
netrtusb driver installed, hardware (2001:3C00) present
|
|
netrtusb, heißt das du hast nen RaLink RT2570 wireless chip? Dafür gibts Treiber auf http://rt2x00.serialmonkey.com. Läuft bei mir gut, ohne ndiswrapper. Kannst ja vllt mal das versuchen, falls es mit ndiswrapper nix wird.
mfg _________________ # cd /pub/
# more beer |
|
Back to top |
|
|
|