| View previous topic :: View next topic |
| Author |
Message |
lyhana8
n00b
Joined: 28 Feb 2007
Posts: 31
Location: France
|
 Posted: Mon Mar 26, 2007 8:54 am Post subject: k3b (growisofs) + update = problem DVD+R (Kubuntu & Gent |
 |
|
Hi,
After updating my kubuntu 2month ago, i got problem bruning DVD+R, i have already scheduled to migrate on gentoo.
I think that will solve my problem... but after my gentoo install 1 month ago, i get the same problem :
I can't burn DVD+R but i can burn CD-RW.
I have the following error on k3b :
| Code: |
System
-----------------------
K3b Version: 1.0
KDE Version: 3.5.6
QT Version: 3.3.8
Kernel: 2.6.20-gentoo-r3
Devices
-----------------------
MATSHITA UJ-845D D100 (/dev/hdb, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, Restricted Overwrite]
Burned media
-----------------------
DVD+R
K3bIsoImager
-----------------------
mkisofs print size result: 2250893 (4609828864 bytes)
Pipe throughput: 5890048 bytes read, 5885760 bytes written.
Used versions
-----------------------
mkisofs: 1.1.2
growisofs: 7.0
growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdb obs=32k seek=0'
/dev/hdb: "Current Write Speed" is 8.2x1352KBps.
1572864/4609828864 ( 0.0%) @0.0x, remaining 292:59 RBU 100.0% UBU 2.1%
1572864/4609828864 ( 0.0%) @0.0x, remaining 439:28 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 585:58 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 781:17 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 927:47 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 1074:16 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 1269:36 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 1416:05 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 1562:35 RBU 100.0% UBU 100.0%
1572864/4609828864 ( 0.0%) @0.0x, remaining 1757:54 RBU 100.0% UBU 100.0%
:-[ WRITE@LBA=300h failed with SK=3h/ASC=11h/ACQ=00h]: Input/output error
:-( write failed: Input/output error
/dev/hdb: flushing cache
/dev/hdb: closing track
:-[ CLOSE TRACK failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error
/dev/hdb: closing disc
:-[ CLOSE DISC failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error
growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/hdb=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:2250893 -dvd-compat -speed=8 -overburn -use-the-force-luke=bufsize:32m
mkisofs
-----------------------
2250893
I: -input-charset not specified, using utf-8 (detected in locale settings)
Using ESCAFLOWNE____2000___KAZ000.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 19.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 18.ogm)
Using ESCAFLOWNE____2000___KAZ001.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 18.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 17.ogm)
Using ESCAFLOWNE____2000___KAZ002.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 17.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 16.ogm)
Using ESCAFLOWNE____2000___KAZ003.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 16.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 15.ogm)
Using ESCAFLOWNE____2000___KAZ004.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 15.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 14.ogm)
Using ESCAFLOWNE____2000___KAZ005.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 14.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 13.ogm)
Using ESCAFLOWNE____2000___KAZ006.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 13.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 12.ogm)
Using ESCAFLOWNE____2000___KAZ007.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 12.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 11.ogm)
Using ESCAFLOWNE____2000___KAZ008.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 11.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 10.ogm)
Using ESCAFLOWNE____2000___KAZ009.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 10.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 09.ogm)
Using ESCAFLOWNE____2000___KAZ00A.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 09.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 08.ogm)
Using ESCAFLOWNE____2000___KAZ00B.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 08.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 07.ogm)
Using ESCAFLOWNE____2000___KAZ00C.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 07.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 06.ogm)
Using ESCAFLOWNE____2000___KAZ00D.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 06.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 05.ogm)
Using ESCAFLOWNE____2000___KAZ00E.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 05.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 04.ogm)
Using ESCAFLOWNE____2000___KAZ00F.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 04.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 03.ogm)
Using ESCAFLOWNE____2000___KAZ00G.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 03.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 02.ogm)
Using ESCAFLOWNE____2000___KAZ00H.OGM;1 for Escaflowne - (2000 - Kazuki Akane) [TV-Series]/Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 02.ogm (Escaflowne - (2000 - Kazuki Akane) [TV-Series] - 01.ogm)
0.02% done, estimate finish Sun Mar 25 23:39:49 2007
0.04% done, estimate finish Mon Mar 26 00:16:53 2007
0.07% done, estimate finish Mon Mar 26 00:04:41 2007
0.09% done, estimate finish Sun Mar 25 23:58:32 2007
0.11% done, estimate finish Sun Mar 25 23:54:49 2007
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Escaflowne 1-19 -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -abstract -copyright -biblio -volset-size 1 -volset-seqno 1 -sort /tmp/kde-lyhana8T0DpT9/k3bpvmBTb.tmp -rational-rock -hide-list /tmp/kde-lyhana8T0DpT9/k3bjuQYfb.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-lyhana8T0DpT9/k3b58IMdc.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-lyhana8T0DpT9/k3b3vGAYb.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Escaflowne 1-19 -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -abstract -copyright -biblio -volset-size 1 -volset-seqno 1 -sort /tmp/kde-lyhana8T0DpT9/k3b0hyVtb.tmp -rational-rock -hide-list /tmp/kde-lyhana8T0DpT9/k3bltY4tb.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-lyhana8T0DpT9/k3boNMTQb.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-lyhana8T0DpT9/k3bc0k9Aa.tmp
|
Thanks for the help
_________________
" Share aware " |
|
| Back to top |
|
 |
no_hope
Guru
Joined: 23 Jun 2003
Posts: 482
|
| Posted: Mon Mar 26, 2007 5:40 pm Post subject: |
|
|
does dmesg show anything suspicious? Are running k3b as proper root (i.e. did you run 'su -')?
piracy is wrong |
|
| Back to top |
|
|
lyhana8
n00b
Joined: 28 Feb 2007
Posts: 31
Location: France
|
| Posted: Mon Mar 26, 2007 8:00 pm Post subject: demsg |
|
|
On k3bsetup everything are under root privileges (have a look here), I run it as user but I try as root, and get the same problem.
I don't know what you mean by 'wrong' so i put the whole dmesg :
| Code: | # dmesg
0x08] "COMB_STA"
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[b0020000-b00207ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: c0000000-cfffffff
PREFETCH window: 90000000-9fffffff
PCI: Bridge: 0000:00:1c.0
IO window: a000-bfff
MEM window: b8000000-bfffffff
PREFETCH window: 88000000-8fffffff
PCI: Bridge: 0000:00:1c.1
IO window: 8000-9fff
MEM window: b4000000-b7ffffff
PREFETCH window: 84000000-87ffffff
PCI: Bus 7, cardbus bridge: 0000:06:04.0
IO window: 00006000-000060ff
IO window: 00006400-000064ff
PREFETCH window: 80000000-83ffffff
MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-7fff
MEM window: b0000000-b3ffffff
PREFETCH window: 80000000-83ffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
DLM (built Mar 17 2007 17:46:14) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/O].
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
vesafb: framebuffer at 0x90000000, mapped to 0xf8880000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:ae6a
vesafb: pmi: set display start = c00caef8, set palette = c00caf38
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
Floppy drive(s): fd0 is 1.44M
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f5777406c9c]
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
tg3.c:v3.72 (January 8, 2007)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:80:f3:bb
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK1031GAS, ATA DISK drive
hdb: MATSHITAUJ-845D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: raw1394: /dev/raw1394 device initialized
kvm: no hardware support
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x50000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001240
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001260
usb usb5: configuration #1 chosen from 1 choice
usb 2-1: new low speed USB device using uhci_hcd and address 2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Microsoft Microsoft Trackball Explorer as /class/input/input4
input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input5
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1e.2 to 64
input: ImPS/2 Logitech Wheel Mouse as /class/input/input6
intel8x0_measure_ac97_clock: measured 56003 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: Intel ICH6 with ALC250 at 0xd0000000, irq 5
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 192k freed
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 489940k swap on /dev/hda5. Priority:-1 extents:1 across:489940k
PM: Writing back config space on device 0000:06:01.0 at offset c (was 5cee0000, writing 0)
PM: Writing back config space on device 0000:06:01.0 at offset b (was 3ed173b, writing 811025)
PM: Writing back config space on device 0000:06:01.0 at offset 3 (was 0, writing 8004)
PM: Writing back config space on device 0000:06:01.0 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:06:01.0 at offset 1 (was 2b00000, writing 2b00006)
PM: Writing back config space on device 0000:06:01.0 at offset 0 (was 3ed173b, writing 169c14e4)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[fglrx] total GART = 130023424
[fglrx] free GART = 114032640
[fglrx] max single GART = 114032640
[fglrx] total LFB = 66977792
[fglrx] free LFB = 52588544
[fglrx] max single LFB = 52588544
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
spurious 8259A interrupt: IRQ7.
[ACPI Debug] String: [0x10] "====QUERY_37===="
tg3: eth0: Link is down.
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
cdrom: This disc doesn't have any tracks I recognize!
hdb: irq timeout: status=0xc0 { Busy }
ide: failed opcode was: unknown
usb 2-1: USB disconnect, address 2
usb 2-1: new low speed USB device using uhci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
input: Microsoft Microsoft Trackball Explorer as /class/input/input7
input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer] on usb-0000:00:1d.0-1
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
|
_________________
" Share aware " |
|
| Back to top |
|
|
no_hope
Guru
Joined: 23 Jun 2003
Posts: 482
|
| Posted: Mon Mar 26, 2007 8:40 pm Post subject: Re: demsg |
|
|
| lyhana8 wrote: |
| Code: |
hdb: irq timeout: status=0xc0 { Busy }
ide: failed opcode was: unknown
|
|
I think this may be the problem.
I had a somewhat similar problem that was only solved in vanilla-sources-2.6.20. Perhaps you should try to upgrade to newer gentoo-sources of give vanilla-sources a go. |
|
| Back to top |
|
|
lyhana8
n00b
Joined: 28 Feb 2007
Posts: 31
Location: France
|
| Posted: Thu Mar 29, 2007 5:32 pm Post subject: |
|
|
 I install the vanilla kernel, but that doesn't solve the problem...
An idea ?
_________________
" Share aware " |
|
| Back to top |
|
|
lyhana8
n00b
Joined: 28 Feb 2007
Posts: 31
Location: France
|
| Posted: Wed Apr 04, 2007 7:35 pm Post subject: |
|
|
I also try downgrading k3b-1.0 to K3b-0.12.17 but the problem is still here.
I have this problem since 3months ago, I need help
_________________
" Share aware " |
|
| Back to top |
|
|
Red Nalie
Guru
Joined: 24 Mar 2003
Posts: 484
Location: Den Helder - The Netherlands - Europe - Earth - Milky Way - Universe
|
| Posted: Mon Apr 30, 2007 8:11 am Post subject: |
|
|
I having the exact same problem, burned DVD's fail randomly giving me the same error.
Some DVD's get burned fine, but don't work, and some just work perfectly.
It's seriously starting to annoy me, and I wonder if anyone could give a hand.
dmesg doesn't give me any serious help, as no errors are shown....
My K3B output:
| Code: |
System
-----------------------
K3b Version: 1.0.1
KDE Version: 3.5.6
QT Version: 3.3.8
Kernel: 2.6.21-gentoo
Devices
-----------------------
Optiarc DVD RW AD-7170S 1.82 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump]
Burned media
-----------------------
DVD+R
K3bIsoImager
-----------------------
mkisofs print size result: 2067171 (4233566208 bytes)
Pipe throughput: 3296778240 bytes read, 3296773824 bytes written.
Used versions
-----------------------
mkisofs: 2.1.1a05
growisofs: 7.0
growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 8.2x1352KBps.
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
0/4233566208 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
1900544/4233566208 ( 0.0%) @0.4x, remaining 2041:00 RBU 100.0% UBU 3.1%
1900544/4233566208 ( 0.0%) @0.0x, remaining 2152:20 RBU 100.0% UBU 100.0%
1900544/4233566208 ( 0.0%) @0.0x, remaining 2300:46 RBU 100.0% UBU 100.0%
1900544/4233566208 ( 0.0%) @0.0x, remaining 2412:06 RBU 100.0% UBU 100.0%
1900544/4233566208 ( 0.0%) @0.0x, remaining 2560:32 RBU 100.0% UBU 100.0%
5701632/4233566208 ( 0.1%) @0.8x, remaining 889:49 RBU 100.0% UBU 90.6%
5701632/4233566208 ( 0.1%) @0.0x, remaining 926:53 RBU 100.0% UBU 100.0%
5701632/4233566208 ( 0.1%) @0.0x, remaining 976:19 RBU 100.0% UBU 100.0%
5701632/4233566208 ( 0.1%) @0.0x, remaining 1013:24 RBU 100.0% UBU 100.0%
5701632/4233566208 ( 0.1%) @0.0x, remaining 1050:29 RBU 100.0% UBU 100.0%
5767168/4233566208 ( 0.1%) @0.0x, remaining 1087:24 RBU 100.0% UBU 100.0%
5767168/4233566208 ( 0.1%) @0.0x, remaining 1124:03 RBU 100.0% UBU 100.0%
5767168/4233566208 ( 0.1%) @0.0x, remaining 1160:42 RBU 100.0% UBU 100.0%
14319616/4233566208 ( 0.3%) @1.9x, remaining 486:10 RBU 100.0% UBU 90.6%
43089920/4233566208 ( 1.0%) @6.2x, remaining 165:19 RBU 100.0% UBU 90.6%
71860224/4233566208 ( 1.7%) @6.2x, remaining 101:20 RBU 100.0% UBU 90.6%
100630528/4233566208 ( 2.4%) @6.2x, remaining 74:36 RBU 100.0% UBU 90.6%
129400832/4233566208 ( 3.1%) @6.2x, remaining 59:12 RBU 100.0% UBU 81.2%
158203904/4233566208 ( 3.7%) @6.2x, remaining 49:22 RBU 100.0% UBU 90.6%
186941440/4233566208 ( 4.4%) @6.2x, remaining 42:55 RBU 100.0% UBU 90.6%
215711744/4233566208 ( 5.1%) @6.2x, remaining 37:52 RBU 100.0% UBU 84.4%
244482048/4233566208 ( 5.8%) @6.2x, remaining 33:59 RBU 100.0% UBU 90.6%
273252352/4233566208 ( 6.5%) @6.2x, remaining 31:09 RBU 100.0% UBU 90.6%
302022656/4233566208 ( 7.1%) @6.2x, remaining 28:38 RBU 100.0% UBU 90.6%
330825728/4233566208 ( 7.8%) @6.2x, remaining 26:32 RBU 100.0% UBU 90.6%
359596032/4233566208 ( 8.5%) @6.2x, remaining 24:57 RBU 100.0% UBU 90.6%
388366336/4233566208 ( 9.2%) @6.2x, remaining 23:25 RBU 100.0% UBU 90.6%
403144704/4233566208 ( 9.5%) @3.2x, remaining 22:57 RBU 100.0% UBU 12.5%
431915008/4233566208 (10.2%) @6.2x, remaining 21:51 RBU 100.0% UBU 90.6%
460685312/4233566208 (10.9%) @6.2x, remaining 20:44 RBU 100.0% UBU 90.6%
489455616/4233566208 (11.6%) @6.2x, remaining 19:45 RBU 100.0% UBU 90.6%
518225920/4233566208 (12.2%) @6.2x, remaining 18:59 RBU 100.0% UBU 90.6%
539099136/4233566208 (12.7%) @4.5x, remaining 18:30 RBU 100.0% UBU 68.8%
567869440/4233566208 (13.4%) @6.2x, remaining 17:45 RBU 100.0% UBU 90.6%
589103104/4233566208 (13.9%) @4.6x, remaining 17:25 RBU 100.0% UBU 90.6%
594903040/4233566208 (14.1%) @1.3x, remaining 17:32 RBU 100.0% UBU 90.6%
633339904/4233566208 (15.0%) @8.3x, remaining 16:34 RBU 100.0% UBU 90.6%
671678464/4233566208 (15.9%) @8.3x, remaining 15:49 RBU 100.0% UBU 90.6%
710049792/4233566208 (16.8%) @8.3x, remaining 15:03 RBU 100.0% UBU 90.6%
748388352/4233566208 (17.7%) @8.3x, remaining 14:21 RBU 100.0% UBU 90.6%
786759680/4233566208 (18.6%) @8.3x, remaining 13:48 RBU 100.0% UBU 90.6%
825131008/4233566208 (19.5%) @8.3x, remaining 13:13 RBU 100.0% UBU 90.6%
863469568/4233566208 (20.4%) @8.3x, remaining 12:41 RBU 100.0% UBU 90.6%
901873664/4233566208 (21.3%) @8.3x, remaining 12:15 RBU 100.0% UBU 90.6%
940310528/4233566208 (22.2%) @8.3x, remaining 11:47 RBU 100.0% UBU 90.6%
978681856/4233566208 (23.1%) @8.3x, remaining 11:21 RBU 100.1% UBU 90.6%
1017118720/4233566208 (24.0%) @8.3x, remaining 11:00 RBU 100.0% UBU 90.6%
1055457280/4233566208 (24.9%) @8.3x, remaining 10:38 RBU 100.0% UBU 90.6%
1093828608/4233566208 (25.8%) @8.3x, remaining 10:17 RBU 100.0% UBU 90.6%
1132199936/4233566208 (26.7%) @8.3x, remaining 9:59 RBU 100.0% UBU 90.6%
1141178368/4233566208 (27.0%) @1.9x, remaining 10:01 RBU 100.0% UBU 90.6%
1179549696/4233566208 (27.9%) @8.3x, remaining 9:42 RBU 100.0% UBU 90.6%
1217888256/4233566208 (28.8%) @8.3x, remaining 9:27 RBU 100.0% UBU 90.6%
1256259584/4233566208 (29.7%) @8.3x, remaining 9:09 RBU 100.0% UBU 90.6%
1294630912/4233566208 (30.6%) @8.3x, remaining 8:53 RBU 100.0% UBU 90.6%
1332969472/4233566208 (31.5%) @8.3x, remaining 8:40 RBU 100.0% UBU 90.6%
1371340800/4233566208 (32.4%) @8.3x, remaining 8:25 RBU 100.0% UBU 90.6%
1409712128/4233566208 (33.3%) @8.3x, remaining 8:10 RBU 100.0% UBU 90.6%
1448050688/4233566208 (34.2%) @8.3x, remaining 7:58 RBU 100.0% UBU 90.6%
1486422016/4233566208 (35.1%) @8.3x, remaining 7:45 RBU 100.0% UBU 90.6%
1524793344/4233566208 (36.0%) @8.3x, remaining 7:33 RBU 100.0% UBU 90.6%
1563131904/4233566208 (36.9%) @8.3x, remaining 7:22 RBU 100.0% UBU 90.6%
1601503232/4233566208 (37.8%) @8.3x, remaining 7:10 RBU 100.0% UBU 90.6%
1639874560/4233566208 (38.7%) @8.3x, remaining 6:59 RBU 100.0% UBU 59.4%
1674575872/4233566208 (39.6%) @7.5x, remaining 6:51 RBU 100.0% UBU 87.5%
1687453696/4233566208 (39.9%) @2.8x, remaining 6:50 RBU 100.0% UBU 59.4%
1725792256/4233566208 (40.8%) @8.3x, remaining 6:39 RBU 100.0% UBU 90.6%
1764229120/4233566208 (41.7%) @8.3x, remaining 6:30 RBU 100.0% UBU 90.6%
1802567680/4233566208 (42.6%) @8.3x, remaining 6:20 RBU 100.0% UBU 90.6%
1840939008/4233566208 (43.5%) @8.3x, remaining 6:10 RBU 100.0% UBU 87.5%
1879310336/4233566208 (44.4%) @8.3x, remaining 6:02 RBU 100.0% UBU 43.8%
1917648896/4233566208 (45.3%) @8.3x, remaining 5:52 RBU 100.0% UBU 90.6%
1956020224/4233566208 (46.2%) @8.3x, remaining 5:43 RBU 100.0% UBU 90.6%
1994424320/4233566208 (47.1%) @8.3x, remaining 5:35 RBU 100.0% UBU 90.6%
2032828416/4233566208 (48.0%) @8.3x, remaining 5:26 RBU 100.0% UBU 87.5%
2071199744/4233566208 (48.9%) @8.3x, remaining 5:18 RBU 100.0% UBU 90.6%
2109603840/4233566208 (49.8%) @8.3x, remaining 5:11 RBU 100.0% UBU 87.5%
2147975168/4233566208 (50.7%) @8.3x, remaining 5:02 RBU 100.0% UBU 90.6%
2186346496/4233566208 (51.6%) @8.3x, remaining 4:54 RBU 100.0% UBU 90.6%
2224029696/4233566208 (52.5%) @8.2x, remaining 4:48 RBU 100.0% UBU 90.6%
2249293824/4233566208 (53.1%) @5.5x, remaining 4:44 RBU 100.0% UBU 90.6%
2287730688/4233566208 (54.0%) @8.3x, remaining 4:36 RBU 100.0% UBU 90.6%
2326069248/4233566208 (54.9%) @8.3x, remaining 4:29 RBU 100.0% UBU 90.6%
2364440576/4233566208 (55.8%) @8.3x, remaining 4:22 RBU 100.0% UBU 90.6%
2402811904/4233566208 (56.8%) @8.3x, remaining 4:15 RBU 100.0% UBU 90.6%
2441150464/4233566208 (57.7%) @8.3x, remaining 4:08 RBU 100.0% UBU 90.6%
2479521792/4233566208 (58.6%) @8.3x, remaining 4:01 RBU 100.0% UBU 90.6%
2517893120/4233566208 (59.5%) @8.3x, remaining 3:55 RBU 100.0% UBU 90.6%
2556264448/4233566208 (60.4%) @8.3x, remaining 3:48 RBU 100.0% UBU 90.6%
2594603008/4233566208 (61.3%) @8.3x, remaining 3:42 RBU 100.0% UBU 90.6%
2632974336/4233566208 (62.2%) @8.3x, remaining 3:35 RBU 100.0% UBU 90.6%
2671345664/4233566208 (63.1%) @8.3x, remaining 3:29 RBU 100.0% UBU 90.6%
2709749760/4233566208 (64.0%) @8.3x, remaining 3:23 RBU 100.0% UBU 87.5%
2748153856/4233566208 (64.9%) @8.3x, remaining 3:17 RBU 100.0% UBU 84.4%
2772992000/4233566208 (65.5%) @5.4x, remaining 3:14 RBU 100.0% UBU 90.6%
2811330560/4233566208 (66.4%) @8.3x, remaining 3:08 RBU 100.0% UBU 84.4%
2849701888/4233566208 (67.3%) @8.3x, remaining 3:02 RBU 100.0% UBU 90.6%
2888073216/4233566208 (68.2%) @8.3x, remaining 2:56 RBU 100.0% UBU 90.6%
2926411776/4233566208 (69.1%) @8.3x, remaining 2:50 RBU 100.0% UBU 90.6%
2964783104/4233566208 (70.0%) @8.3x, remaining 2:44 RBU 100.0% UBU 90.6%
3003154432/4233566208 (70.9%) @8.3x, remaining 2:39 RBU 100.0% UBU 90.6%
3041525760/4233566208 (71.8%) @8.3x, remaining 2:33 RBU 100.0% UBU 90.6%
3079864320/4233566208 (72.7%) @8.3x, remaining 2:28 RBU 100.0% UBU 90.6%
3118235648/4233566208 (73.7%) @8.3x, remaining 2:22 RBU 100.0% UBU 90.6%
3156606976/4233566208 (74.6%) @8.3x, remaining 2:17 RBU 100.0% UBU 90.6%
3194978304/4233566208 (75.5%) @8.3x, remaining 2:11 RBU 100.0% UBU 90.6%
3233316864/4233566208 (76.4%) @8.3x, remaining 2:06 RBU 100.0% UBU 90.6%
3263102976/4233566208 (77.1%) @6.4x, remaining 2:02 RBU 100.0% UBU 90.6%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:03 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:04 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:05 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:06 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:07 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:08 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:09 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:10 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:11 RBU 100.0% UBU 100.0%
3263102976/4233566208 (77.1%) @0.0x, remaining 2:12 RBU 100.0% UBU 100.0%
:-[ WRITE@LBA=184fe0h failed with SK=3h/ASC=02h/ACQ=00h]: Input/output error
:-( write failed: Input/output error
/dev/sr0: flushing cache
/dev/sr0: closing track
:-[ CLOSE TRACK failed with SK=3h/ASC=0Ch/ACQ=00h]: Input/output error
/dev/sr0: closing disc
:-[ CLOSE DISC failed with SK=5h/ASC=72h/ACQ=03h]: Input/output error
growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:2067171 -use-the-force-luke=dao:2067171 -dvd-compat -speed=8 -use-the-force-luke=bufsize:32m
mkisofs
-----------------------
/usr/bin/mkisofs: Warning: -follow-links does not always work correctly; be careful.
/usr/bin/mkisofs: Warning: -follow-links does not always work correctly; be careful.
2067171
/usr/bin/mkisofs: Warning: -follow-links does not always work correctly; be careful.
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
0.02% done, estimate finish Mon Apr 30 09:57:50 2007
0.05% done, estimate finish Mon Apr 30 10:31:52 2007
0.07% done, estimate finish Mon Apr 30 10:20:40 2007
0.10% done, estimate finish Mon Apr 30 10:15:01 2007
0.12% done, estimate finish Mon Apr 30 10:11:36 2007
0.15% done, estimate finish Mon Apr 30 10:09:16 2007
0.17% done, estimate finish Mon Apr 30 10:07:39 2007
0.19% done, estimate finish Mon Apr 30 10:06:26 2007
0.22% done, estimate finish Mon Apr 30 10:05:29 2007
0.24% done, estimate finish Mon Apr 30 10:04:42 2007
0.27% done, estimate finish Mon Apr 30 10:04:05 2007
0.29% done, estimate finish Mon Apr 30 10:03:34 2007
0.31% done, estimate finish Mon Apr 30 10:03:08 2007
0.34% done, estimate finish Mon Apr 30 10:02:44 2007
0.36% done, estimate finish Mon Apr 30 10:02:25 2007
0.39% done, estimate finish Mon Apr 30 10:02:08 2007
0.41% done, estimate finish Mon Apr 30 10:01:52 2007
0.44% done, estimate finish Mon Apr 30 10:01:39 2007
0.46% done, estimate finish Mon Apr 30 10:01:27 2007
...
77.74% done, estimate finish Mon Apr 30 10:06:41 2007
77.76% done, estimate finish Mon Apr 30 10:06:41 2007
77.79% done, estimate finish Mon Apr 30 10:06:40 2007
77.81% done, estimate finish Mon Apr 30 10:06:40 2007
77.84% done, estimate finish Mon Apr 30 10:06:40 2007
77.86% done, estimate finish Mon Apr 30 10:06:41 2007
mkisofs calculate size command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid The Wicker Man -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-jorn/k3bde7exa.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-jorn/k3bQ59EVa.tmp -dvd-video -f /tmp/kde-jorn/k3bVideoDvd0
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid The Wicker Man -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-jorn/k3bMCSGta.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-jorn/k3bO7Akqc.tmp -dvd-video -f /tmp/kde-jorn/k3bVideoDvd0
|
_________________
Many people call me Linux-freak, I just see me as a freak who uses Linux 
i'm a little n00bie short and stout, here is my nickname here is my SHOUT!!!1 when i get all flamed up hear me SHOUT!!1 ban me forever, kick me out |
|
| Back to top |
|
|
Red Nalie
Guru
Joined: 24 Mar 2003
Posts: 484
Location: Den Helder - The Netherlands - Europe - Earth - Milky Way - Universe
|
| Posted: Sat May 05, 2007 3:21 pm Post subject: |
|
|
*kick*
Still having the same problems 
_________________
Many people call me Linux-freak, I just see me as a freak who uses Linux
i'm a little n00bie short and stout, here is my nickname here is my SHOUT!!!1 when i get all flamed up hear me SHOUT!!1 ban me forever, kick me out |
|
| Back to top |
|
|
phant0ml0rd
n00b
Joined: 09 Oct 2006
Posts: 34
|
| Posted: Sun May 06, 2007 3:03 pm Post subject: this may be a stupid suggestion but.. |
|
|
| are you sure you have enough space in /tmp? I think K3B uses it as scratch space |
|
| Back to top |
|
|
Tommassino
n00b
Joined: 15 Sep 2006
Posts: 16
|
| Posted: Mon Feb 18, 2008 6:51 am Post subject: |
|
|
HI i am having exactly the same problem here.The same errors like abovee. Were you able to solve it?
I was burning dvds fine for several months on verbatim dvd-.But Then my bother bought dvd+ and i was after some hacking(reemerging and other things i dont remember) able to burn to dvd+ , but the burning ended at 50% but the everything i setted was burned. Nov after emerging world i am not able to write to this mediums (dvd+) anymore.But dvd- still works fine. |
|
| Back to top |
|
|
ewbish
n00b
Joined: 11 Jan 2005
Posts: 38
|
| Posted: Wed Mar 12, 2008 1:29 am Post subject: |
|
|
I have the EXACT same problem after emerging world last month. Been burning DVD's just fine.
:-[ WRITE@LBA=300h failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error
write failed: Input/output error
/dev/hda: flushing cache
/dev/hda: closing track
:-[ CLOSE TRACK failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error
/dev/hda: closing disc
:-[ CLOSE DISC failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
