silverwolf
n00b
Joined: 30 Jul 2003
Posts: 48
Location: UK::Cambridgeshire
|
 Posted: Sun Apr 15, 2007 3:15 pm Post subject: SOLVED3CRPAG175+wpa_supplicant+WPA-PSK+TKIP:: not connecting |
 |
|
Hi,
I'm tearing my hair out here trying to get a wireless card working. I can't see the wood for the trees any more -- can anybody help out?
I have a 3com card that still appears to be supported by madwifi. I'm using wpa_supplicant. The router is a Linksys Wireless-G gateway that has other machines (not running linux) connecting okay using WPA-PSK and TKIP.
I'm running linux-2.6.19-gentoo-r5 kernel with 802.11 options built in.
/etc/conf.d/net:
| Code: |
config_eth0=( "192.168.1.100 netmask 255.255.255.0 brd 192.168.1.255" )
routes_eth0=( "default gw 192.168.1.1" )
modules=( "wpa_supplicant" )
wpa_supplicant_ath0="-Dmadwifi"
config_ath0=( "192.168.1.200 netmask 255.255.255.0 brd 192.168.1.255" )
routes_ath0=( "default gw 192.168.1.1" )
|
wpa_supplicant.conf:
| Code: |
ctrl_interface=/var/run/wpa_supplicant
ap_scan=2
network={
ssid="Home7Net"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
psk="notofinteresthere"
priority=2
}
|
Running wpa_supplicant from the command line shows:
| Code: |
Initializing interface 'ath0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'madwifi' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=2
Line: 3 - start of a new network block
ssid - hexdump_ascii(len=8):
48 6f 6d 65 37 4e 65 74 Home7Net
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x2
pairwise: 0x8
group: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=21): [REMOVED]
priority=2 (0x2)
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 2
id=0 ssid='Home7Net'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=21 WE(source)=13 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:0d:54:98:d4:38
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_set_countermeasures: enabled=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface ath0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
Ignore event for foreign ifindex 4
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'Home7Net'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_madwifi_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b1a len=16
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface ath0
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=0
wpa_driver_madwifi_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
|
Close, but no cigar. Anybody got any bright ideas? This is driving me nuts...
Thanks in advance
Last edited by silverwolf on Sat May 12, 2007 11:06 am; edited 1 time in total |
|
Networking & Security
