| View previous topic :: View next topic |
| Author |
Message |
TeMpEsT_BR
n00b
Joined: 19 Jan 2007
Posts: 45
Location: Campinas, SP - Brazil
|
 Posted: Wed May 02, 2007 7:04 pm Post subject: (NF4) Two Network cards, only one works.. Help plz! [Solved] |
 |
|
Hello !
I'm having a hard time configuring my network cards. My MB is a DFI Lanparty nforce4 SLI. It has 2 ethernet adapters nforce and marvell.
I have configured the kernel (2.6.21) with built-in (and as modules as well) driver forcedeth and skge.
When i enable both drivers, only marvell will work. When i only enable one of them, i can get each one of them to work.
Right now, my kernel have the two drivers built-in:
| Code: |
Porsche ~ # dmesg
Linux version 2.6.21-gentoo (root@Porsche) (gcc version 4.1.2 (Gentoo 4.1.2)) #8 Wed May 2 02:33:16 BRT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003fde0000 end: 000000003fee0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003fee0000 size: 0000000000003000 end: 000000003fee3000 type: 4
copy_e820_map() start: 000000003fee3000 size: 000000000000d000 end: 000000003fef0000 type: 3
copy_e820_map() start: 000000003fef0000 size: 0000000000010000 end: 000000003ff00000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4210
Entering add_active_range(0, 0, 261856) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261856
early_node_map[1] active PFN ranges
0: 0 -> 261856
On node 0 totalpages: 261856
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 253 pages used for memmap
HighMem zone: 32227 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP 000F8160, 0014 (r0 Nvidia)
ACPI: RSDT 3FEE3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 3FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 3FEE3180, 6027 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 3FEE0000, 0040
ACPI: SSDT 3FEE92C0, 00D6 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: MCFG 3FEE9400, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 3FEE9200, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
Built 1 zonelists. Total pages: 259811
Kernel command line: root=/dev/sda2 CONSOLE=/dev/tty1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2009.262 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033332k/1047424k available (2606k kernel code, 13476k reserved, 1048k data, 200k init, 129920k highmem)
virtual kernel memory layout:
fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0494000 - 0xc04c6000 ( 200 kB)
.data : 0xc038b93b - 0xc0491bec (1048 kB)
.text : 0xc0100000 - 0xc038b93b (2606 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4020.99 BogoMIPS (lpj=8041981)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on device 00:18
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [10de/005e] 000580 00
PCI: Calling quirk c0317420 for 0000:00:00.0
PCI: Found 0000:00:01.0 [10de/0050] 000601 00
PCI: Calling quirk c0317420 for 0000:00:01.0
PCI: Found 0000:00:01.1 [10de/0052] 000c05 00
PCI: Calling quirk c0317420 for 0000:00:01.1
PCI: Found 0000:00:02.0 [10de/005a] 000c03 00
PCI: Calling quirk c0317420 for 0000:00:02.0
PCI: Found 0000:00:04.0 [10de/0059] 000401 00
PCI: Calling quirk c0317420 for 0000:00:04.0
PCI: Found 0000:00:06.0 [10de/0053] 000101 00
PCI: Calling quirk c0317420 for 0000:00:06.0
PCI: Found 0000:00:07.0 [10de/0054] 000101 00
PCI: Calling quirk c0317420 for 0000:00:07.0
PCI: Found 0000:00:08.0 [10de/0055] 000101 00
PCI: Calling quirk c0317420 for 0000:00:08.0
PCI: Found 0000:00:09.0 [10de/005c] 000604 01
PCI: Calling quirk c0317420 for 0000:00:09.0
PCI: Found 0000:00:0a.0 [10de/0057] 000680 00
PCI: Calling quirk c0317420 for 0000:00:0a.0
PCI: Found 0000:00:0b.0 [10de/005d] 000604 01
PCI: Calling quirk c0317420 for 0000:00:0b.0
PCI: Found 0000:00:0c.0 [10de/005d] 000604 01
PCI: Calling quirk c0317420 for 0000:00:0c.0
PCI: Found 0000:00:0d.0 [10de/005d] 000604 01
PCI: Calling quirk c0317420 for 0000:00:0d.0
PCI: Found 0000:00:0e.0 [10de/005d] 000604 01
PCI: Calling quirk c0317420 for 0000:00:0e.0
PCI: Found 0000:00:18.0 [1022/1100] 000600 00
PCI: Calling quirk c0317420 for 0000:00:18.0
PCI: Found 0000:00:18.1 [1022/1101] 000600 00
PCI: Calling quirk c0317420 for 0000:00:18.1
PCI: Found 0000:00:18.2 [1022/1102] 000600 00
PCI: Calling quirk c0317420 for 0000:00:18.2
PCI: Found 0000:00:18.3 [1022/1103] 000600 00
PCI: Calling quirk c0317420 for 0000:00:18.3
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:09.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:06.0 [10b9/5459] 000703 00
PCI: Calling quirk c0317420 for 0000:01:06.0
PCI: Found 0000:01:07.0 [109e/036e] 000400 00
PCI: Calling quirk c0317420 for 0000:01:07.0
PCI: Found 0000:01:07.1 [109e/0878] 000480 00
PCI: Calling quirk c0317420 for 0000:01:07.1
PCI: Found 0000:01:09.0 [1106/3044] 000c00 00
PCI: Calling quirk c0317420 for 0000:01:09.0
PCI: Found 0000:01:0a.0 [11ab/4320] 000200 00
PCI: Calling quirk c0317420 for 0000:01:0a.0
PCI: Fixups for bus 0000:01
PCI: Transparent bridge - 0000:00:09.0
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:0b.0, config 020200, pass 0
PCI: Scanning bus 0000:02
PCI: Fixups for bus 0000:02
PCI: Bus scan for 0000:02 returning with max=02
PCI: Scanning behind PCI bridge 0000:00:0c.0, config 030300, pass 0
PCI: Scanning bus 0000:03
PCI: Fixups for bus 0000:03
PCI: Bus scan for 0000:03 returning with max=03
PCI: Scanning behind PCI bridge 0000:00:0d.0, config 040400, pass 0
PCI: Scanning bus 0000:04
PCI: Fixups for bus 0000:04
PCI: Bus scan for 0000:04 returning with max=04
PCI: Scanning behind PCI bridge 0000:00:0e.0, config 050500, pass 0
PCI: Scanning bus 0000:05
PCI: Found 0000:05:00.0 [10de/00c0] 000300 00
PCI: Calling quirk c0317420 for 0000:05:00.0
Boot video device is 0000:05:00.0
PCI: Fixups for bus 0000:05
PCI: Bus scan for 0000:05 returning with max=05
PCI: Scanning behind PCI bridge 0000:00:09.0, config 010100, pass 1
PCI: Scanning behind PCI bridge 0000:00:0b.0, config 020200, pass 1
PCI: Scanning behind PCI bridge 0000:00:0c.0, config 030300, pass 1
PCI: Scanning behind PCI bridge 0000:00:0d.0, config 040400, pass 1
PCI: Scanning behind PCI bridge 0000:00:0e.0, config 050500, pass 1
PCI: Bus scan for 0000:00 returning with max=05
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0x1000-0x107f has been reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
Time: tsc clocksource has been installed.
pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0a: iomem range 0xcee00-0xcffff has been reserved
pnp: 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
got res [fdf00000:fdf1ffff] bus [fdf00000:fdf1ffff] flags 7200 for BAR 6 of 0000:01:0a.0
PCI: Bridge: 0000:00:09.0
IO window: a000-afff
MEM window: fde00000-fdefffff
PREFETCH window: fdf00000-fdffffff
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:0c.0
IO window: 8000-8fff
MEM window: fdb00000-fdbfffff
PREFETCH window: fda00000-fdafffff
PCI: Bridge: 0000:00:0d.0
IO window: 7000-7fff
MEM window: fd900000-fd9fffff
PREFETCH window: fd800000-fd8fffff
got res [fc000000:fc01ffff] bus [fc000000:fc01ffff] flags 7202 for BAR 6 of 0000:05:00.0
PCI: Bridge: 0000:00:0e.0
IO window: 6000-6fff
MEM window: fa000000-fcffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Calling quirk c0230860 for 0000:00:00.0
PCI: Calling quirk c02f15c0 for 0000:00:00.0
PCI: Calling quirk c0230860 for 0000:00:01.0
PCI: Calling quirk c02f15c0 for 0000:00:01.0
PCI: Calling quirk c0230860 for 0000:00:01.1
PCI: Calling quirk c02f15c0 for 0000:00:01.1
PCI: Calling quirk c0230860 for 0000:00:02.0
PCI: Calling quirk c02f15c0 for 0000:00:02.0
PCI: Calling quirk c0230860 for 0000:00:04.0
PCI: Calling quirk c02f15c0 for 0000:00:04.0
PCI: Calling quirk c0230860 for 0000:00:06.0
PCI: Calling quirk c02f15c0 for 0000:00:06.0
PCI: Calling quirk c0230860 for 0000:00:07.0
PCI: Calling quirk c02f15c0 for 0000:00:07.0
PCI: Calling quirk c0230860 for 0000:00:08.0
PCI: Calling quirk c02f15c0 for 0000:00:08.0
PCI: Calling quirk c0230860 for 0000:00:09.0
PCI: Calling quirk c02f15c0 for 0000:00:09.0
PCI: Calling quirk c0230860 for 0000:00:0a.0
PCI: Calling quirk c02f15c0 for 0000:00:0a.0
PCI: Calling quirk c022f5f0 for 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Calling quirk c0230860 for 0000:00:0b.0
PCI: Calling quirk c02f15c0 for 0000:00:0b.0
PCI: Calling quirk c022f5f0 for 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Calling quirk c0230860 for 0000:00:0c.0
PCI: Calling quirk c02f15c0 for 0000:00:0c.0
PCI: Calling quirk c022f5f0 for 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Calling quirk c0230860 for 0000:00:0d.0
PCI: Calling quirk c02f15c0 for 0000:00:0d.0
PCI: Calling quirk c022f5f0 for 0000:00:0e.0
PCI: Linking AER extended capability on 0000:00:0e.0
PCI: Calling quirk c0230860 for 0000:00:0e.0
PCI: Calling quirk c02f15c0 for 0000:00:0e.0
PCI: Calling quirk c0230860 for 0000:00:18.0
PCI: Calling quirk c02f15c0 for 0000:00:18.0
PCI: Calling quirk c0230860 for 0000:00:18.1
PCI: Calling quirk c02f15c0 for 0000:00:18.1
PCI: Calling quirk c0230860 for 0000:00:18.2
PCI: Calling quirk c02f15c0 for 0000:00:18.2
PCI: Calling quirk c0230860 for 0000:00:18.3
PCI: Calling quirk c02f15c0 for 0000:00:18.3
PCI: Calling quirk c0230860 for 0000:01:06.0
PCI: Calling quirk c02f15c0 for 0000:01:06.0
PCI: Calling quirk c0230860 for 0000:01:07.0
PCI: Calling quirk c02f15c0 for 0000:01:07.0
PCI: Calling quirk c0230860 for 0000:01:07.1
PCI: Calling quirk c02f15c0 for 0000:01:07.1
PCI: Calling quirk c0230860 for 0000:01:09.0
PCI: Calling quirk c02f15c0 for 0000:01:09.0
PCI: Calling quirk c0230860 for 0000:01:0a.0
PCI: Calling quirk c02f15c0 for 0000:01:0a.0
PCI: Calling quirk c0230860 for 0000:05:00.0
PCI: Calling quirk c02f15c0 for 0000:05:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Real Time Clock Driver v1.12ac
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
vesafb: NVIDIA Corporation, nv41 Board - p317h20 , Chip Rev (OEM: NVIDIA)
vesafb: VBE version: 3.0
vesafb: protected mode interface info at c000:d300
vesafb: pmi: set display start = c00cd336, set palette = c00cd3a0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: VBIOS/hardware supports DDC2 transfers
vesafb: monitor limits: vf = 61 Hz, hf = 67 kHz, clk = 2550 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 160x64
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 262144k
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (43 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
0000:01:06.0: ttyS1 at I/O 0xac28 (irq = 16) is a 8250
0000:01:06.0: ttyS2 at I/O 0xac40 (irq = 16) is a 8250
0000:01:06.0: ttyS3 at I/O 0xac50 (irq = 16) is a 8250
Couldn't register serial port 0000:01:06.0: -28
loop: loaded (max 8 devices)
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
skge 1.10 addr 0xfdef8000 irq 16 chip Yukon-Lite rev 9
skge eth0: addr 00:01:29:f5:25:7b
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
Switched to high resolution mode on CPU 0
eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:0a.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: HL-DT-ST RW/DVD GCC-4521B, ATAPI CD/DVD-ROM drive
hdb: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
sata_nv 0000:00:07.0: version 3.3
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 18
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0xf881c480 ctl 0xf881c4a0 bmdma 0x0001d400 irq 18
ata2: SATA max UDMA/133 cmd 0xf881c580 ctl 0xf881c5a0 bmdma 0x0001d408 irq 18
scsi0 : sata_nv
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 19
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0xf881e480 ctl 0xf881e4a0 bmdma 0x0001c000 irq 19
ata4: SATA max UDMA/133 cmd 0xf881e580 ctl 0xf881e5a0 bmdma 0x0001c008 irq 19
scsi2 : sata_nv
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi3 : sata_nv
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-6: ST3160827AS, 3.42, max UDMA/133
ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: Attached scsi disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5
ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: Attached scsi disk sdb
sd 3:0:0:0: Attached scsi generic sg1 type 0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb 1-2: new low speed USB device using ohci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 1-4: new low speed USB device using ohci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
input: Microsoft� Office Keyboard as /class/input/input3
input: USB HID v1.10 Keyboard [Microsoft� Office Keyboard] on usb-0000:00:02.0-4
input: Microsoft� Office Keyboard as /class/input/input4
input: USB HID v1.10 Device [Microsoft� Office Keyboard] on usb-0000:00:02.0-4
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
Using IPI Shortcut mode
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 200k freed
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:04.0 to 64
nvidia: module license 'NVIDIA' taints kernel.
intel8x0_measure_ac97_clock: measured 54741 usecs
intel8x0: clocking to 46921
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
fuse init (API version 7.8)
fuse distribution version: 2.6.4
Adding 2112536k swap on /dev/sda3. Priority:-1 extents:1 across:2112536k
skge eth0: enabling interface
skge eth0: Link is up at 100 Mbps, full duplex, flow control both
it87: Found IT8712F chip at 0x290, revision 7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
Time: acpi_pm clocksource has been installed.
Clocksource tsc unstable (delta = -62682276 ns)
|
For me the kernel looks OK, but when i try to start de nforce card, i get this:
| Code: |
Porsche ~ # /etc/init.d/net.eth1 start
* Starting eth1
eth1: error fetching interface information: Device not found
eth1: error fetching interface information: Device not found
eth1: unknown interface: No such device
eth1: unknown interface: No such device
eth1: error fetching interface information: Device not found
eth1: unknown interface: No such device
* Configuration not set for eth1 - assuming DHCP
* Bringing up eth1
* dhcp
* Running dhcpcd ...
Error, eth1: ioctl SIOCGIFHWADDR: No such device [ !! ]
eth1: unknown interface: No such device [ !! ]
|
Does anyone knows what's going on????
Thanks!
PS: poor english... =(
Last edited by TeMpEsT_BR on Sun Jun 17, 2007 5:16 pm; edited 1 time in total |
|
| Back to top |
|
 |
ketjap
Tux's lil' helper
Joined: 03 Nov 2005
Posts: 75
Location: The Netherlands
|
| Posted: Wed May 02, 2007 7:17 pm Post subject: |
|
|
You can try to build the drivers as modules.
What happens if you remove one network card with this setup? Does the other work or doesn't?
Try to play with your pci slots. You never know where it's good for:) |
|
| Back to top |
|
|
TeMpEsT_BR
n00b
Joined: 19 Jan 2007
Posts: 45
Location: Campinas, SP - Brazil
|
| Posted: Wed May 02, 2007 7:23 pm Post subject: |
|
|
both ethernet adapters are onboard...
i have tried to compile them as modules too, but it makes no difference to when they are built-in...
The strage thing is that if i only add driver for one of the cards, they work. The problem only appears when i have both drivers... Also, when i have the two drivers, i get a small freeze during boot when udev starts... |
|
| Back to top |
|
|
widan
Veteran
Joined: 07 Jun 2005
Posts: 1512
Location: Paris, France
|
| Posted: Wed May 02, 2007 9:33 pm Post subject: Re: Two Network cards, only one works.. Help plz! |
|
|
| TeMpEsT_BR wrote: | For me the kernel looks OK, but when i try to start de nforce card, i get this:
| Code: | Porsche ~ # /etc/init.d/net.eth1 start
* Starting eth1
eth1: error fetching interface information: Device not found
eth1: error fetching interface information: Device not found
eth1: unknown interface: No such device
eth1: unknown interface: No such device
eth1: error fetching interface information: Device not found
eth1: unknown interface: No such device
* Configuration not set for eth1 - assuming DHCP
* Bringing up eth1
* dhcp
* Running dhcpcd ...
Error, eth1: ioctl SIOCGIFHWADDR: No such device [ !! ]
eth1: unknown interface: No such device [ !! ] |
|
Which devices do you have in "ifconfig -a" ? Sometimes udev seems to do weird things with interface names. I'm pretty sure the interface is there (it shows up in your dmesg, and while it might not work properly, you should not have a "No such device" error), it probably just doesn't have the name you expect. |
|
| Back to top |
|
|
TeMpEsT_BR
n00b
Joined: 19 Jan 2007
Posts: 45
Location: Campinas, SP - Brazil
|
| Posted: Thu May 03, 2007 12:37 am Post subject: |
|
|
Damn, you're right...
| Code: |
Porsche andre # ifconfig -a
eth0 Encapsulamento do Link: Ethernet Endereço de HW 00:01:29:F5:25:7B
inet end.: 10.0.1.2 Bcast:10.0.1.255 Masc:255.255.255.0
UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1
RX packets:8659 errors:0 dropped:0 overruns:0 frame:0
TX packets:6145 errors:0 dropped:0 overruns:0 carrier:0
colisões:0 txqueuelen:1000
RX bytes:7594432 (7.2 Mb) TX bytes:840269 (820.5 Kb)
IRQ:20
eth1_rena Encapsulamento do Link: Ethernet Endereço de HW 04:4B:80:80:80:03
BROADCASTMULTICAST MTU:1500 Métrica:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
colisões:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
IRQ:17 Endereço de E/S:0xa000
lo Encapsulamento do Link: Loopback Local
inet end.: 127.0.0.1 Masc:255.0.0.0
UP LOOPBACKRUNNING MTU:16436 Métrica:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
colisões:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
|
How can i fix this? |
|
| Back to top |
|
|
suicidal_orange_II
Apprentice
Joined: 04 Sep 2004
Posts: 299
|
| Posted: Sun Jun 17, 2007 2:57 pm Post subject: |
|
|
Renaming the script to the right device name will fix this 
| Code: | | mv /etc/init.d/net.eth1 /etc/init.d/eth1_rename_ren |
I found the full device name on google, hopefully its right as it is found by running "ip link show", which I don't have on this gentoo install.
Good luck,
Suicidal_Orange |
|
| Back to top |
|
|
TeMpEsT_BR
n00b
Joined: 19 Jan 2007
Posts: 45
Location: Campinas, SP - Brazil
|
| Posted: Sun Jun 17, 2007 5:16 pm Post subject: |
|
|
Just to leave a answer to anyone with the same problem:
It all came down to udev. I have found the solution on it's config files.. I played with /etc/udev/rules.d/ and made it work.
After a while, portage upgraded my udev and i used -5 option for the config on etc-update.
Now everything works fine! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
