View previous topic :: View next topic |
Author |
Message |
carpman Advocate
Joined: 20 Jun 2002 Posts: 2202 Location: London - UK
|
Posted: Tue May 01, 2007 6:09 pm Post subject: cedega 6 fails - dbus |
|
|
Hello had cedega 6 working for a while but as don't play it everyday not sure when it stopped working, now get errors:
Code: |
$ cedega
Traceback (most recent call last):
File "/usr/lib/transgaming_cedega/Point2Play_gui.py", line 2751, in ?
Point2Play_gui_ref = Point2Play_gui( Point2Play.Point2Play( config_file) )
File "/usr/lib/transgaming_cedega/Point2Play_gui.py", line 525, in __init__
system_detection.detect_optical_drives(self.Point2Play)
File "/usr/lib/transgaming_cedega/system_detection.py", line 339, in detect_optical_drives
dbusOpticalDrivesList = cdrom.getDbusOpticalDrivesList()
File "/usr/lib/transgaming_cedega/cdrom.py", line 186, in getDbusOpticalDrivesList
storage_udi_obj = bus.get_object("org.freedesktop.Hal", storage_udi)
File "/usr/lib/python2.4/site-packages/dbus/_dbus.py", line 410, in get_object
follow_name_owner_changes=follow_name_owner_changes)
File "/usr/lib/python2.4/site-packages/dbus/proxies.py", line 250, in __init__
self._pending_introspect = self._Introspect()
File "/usr/lib/python2.4/site-packages/dbus/proxies.py", line 320, in _Introspect
message = _dbus_bindings.MethodCallMessage(None, self.__dbus_object_path__, 'org.freedesktop.DBus.Introspectable', 'Introspect')
ValueError: Invalid object path '/org/freedesktop/Hal/devices/storage_model_boot/': ends with '/' and is not just '/'
|
Any ideas?
cheers _________________ Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Back to top |
|
|
moocha Watchman
Joined: 21 Oct 2003 Posts: 5722
|
Posted: Wed May 02, 2007 1:00 pm Post subject: |
|
|
Try re-emerging dbus and dbus-python via Code: | emerge --oneshot dbus dbus-python |
_________________ Military Commissions Act of 2006: http://tinyurl.com/jrcto
"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety."
-- attributed to Benjamin Franklin |
|
Back to top |
|
|
carpman Advocate
Joined: 20 Jun 2002 Posts: 2202 Location: London - UK
|
Posted: Wed May 02, 2007 2:40 pm Post subject: |
|
|
moocha wrote: | Try re-emerging dbus and dbus-python via Code: | emerge --oneshot dbus dbus-python |
|
Thanks for reply but tried that and no change _________________ Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Back to top |
|
|
JuddRogers n00b
Joined: 23 Jun 2003 Posts: 32 Location: Austin, Texas
|
Posted: Thu Jun 07, 2007 2:39 pm Post subject: |
|
|
moocha wrote: | Try re-emerging dbus and dbus-python via Code: | emerge --oneshot dbus dbus-python |
|
dbus requires hal so be sure you have hal built and hald running. hal is sys-aps/hal
To see if it is running:
Code: | /etc/init.d/hald status |
To build:
Code: | emerge sys-aps/hal
rc-update add hald default |
|
|
Back to top |
|
|
carpman Advocate
Joined: 20 Jun 2002 Posts: 2202 Location: London - UK
|
Posted: Thu Jun 07, 2007 5:45 pm Post subject: |
|
|
Yes hald has been installed for long time, still no joy with this problem?
Code: |
# /etc/init.d/hald status
* status: started
|
_________________ Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Back to top |
|
|
Apopatos Guru
Joined: 17 Oct 2004 Posts: 512 Location: Hellas
|
Posted: Mon Jun 18, 2007 11:04 am Post subject: |
|
|
I had exactly the same problem though it is solved after I started hald
Code: | /etc/init.d/hald start |
|
|
Back to top |
|
|
carpman Advocate
Joined: 20 Jun 2002 Posts: 2202 Location: London - UK
|
Posted: Mon Jun 18, 2007 4:16 pm Post subject: |
|
|
Apopatos wrote: | I had exactly the same problem though it is solved after I started hald
Code: | /etc/init.d/hald start |
|
cheers but like i keep saying hald is running? _________________ Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Back to top |
|
|
Hyper_Eye Guru
Joined: 17 Aug 2003 Posts: 462 Location: Huntsville, AL.
|
Posted: Mon Jun 18, 2007 7:22 pm Post subject: |
|
|
Try restarting hald:
Code: | /etc/init.d/hald restart |
Other then that you can try cleaning out cedega and installing fresh. _________________ Gentoo Gaming Videos |
|
Back to top |
|
|
carpman Advocate
Joined: 20 Jun 2002 Posts: 2202 Location: London - UK
|
Posted: Mon Jun 18, 2007 7:26 pm Post subject: |
|
|
Hyper_Eye wrote: | Try restarting hald:
Code: | /etc/init.d/hald restart |
Other then that you can try cleaning out cedega and installing fresh. |
Like i said i have tried that, though don't think it is cedega as kde no longer automounts anything and k3b dies with:
Code: |
k3b
michael@hamlet ~ $ process 21824: arguments to dbus_message_new_method_call() were incorrect, assertion "_dbus_check_is_valid_path (path)" failed in file dbus-message.c line 1074.
This is normally a bug in some application using the D-Bus library.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'k3b' crashing...
KCrash cannot reach kdeinit, launching directly.
|
_________________ Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Back to top |
|
|
ratch3t.x n00b
Joined: 19 Dec 2006 Posts: 60
|
Posted: Sat Jun 30, 2007 7:59 am Post subject: |
|
|
try this :
/etc/init.d/hald start
/etc/init.d/dbus start
and I would probably add these to runlevel default:
rc-update add hald default
rc-update add dbus default
you must gentoolkit installed for this -- these things were my problem, cedega works just fine now |
|
Back to top |
|
|
carpman Advocate
Joined: 20 Jun 2002 Posts: 2202 Location: London - UK
|
Posted: Sat Jun 30, 2007 11:03 am Post subject: |
|
|
ratch3t.x wrote: | try this :
/etc/init.d/hald start
/etc/init.d/dbus start
and I would probably add these to runlevel default:
rc-update add hald default
rc-update add dbus default
you must gentoolkit installed for this -- these things were my problem, cedega works just fine now |
Thanks but these have been installed for ages. _________________ Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Back to top |
|
|
ratch3t.x n00b
Joined: 19 Dec 2006 Posts: 60
|
Posted: Sat Jun 30, 2007 10:03 pm Post subject: |
|
|
well --- there is python-dbus too, which involves both dbus and python of coarse -- i would check the versions of the dependencies of cedega -- you may want to re-emerge all of the dependencies, there possibly be an error with pygtk too.
I would probably do emerge -C then reinstall other than update. hope this may help
errr -- maybe try emerge -av python-dbus? hope this helps |
|
Back to top |
|
|
carpman Advocate
Joined: 20 Jun 2002 Posts: 2202 Location: London - UK
|
Posted: Sat Jun 30, 2007 10:18 pm Post subject: |
|
|
ratch3t.x wrote: | well --- there is python-dbus too, which involves both dbus and python of coarse -- i would check the versions of the dependencies of cedega -- you may want to re-emerge all of the dependencies, there possibly be an error with pygtk too.
I would probably do emerge -C then reinstall other than update. hope this may help
errr -- maybe try emerge -av python-dbus? hope this helps |
cheers but was also done a while ago, am going to do a reinstall with 64bit version og gentoo. _________________ Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Back to top |
|
|
|