| View previous topic :: View next topic |
| Author |
Message |
amaury.dg
n00b
Joined: 05 Feb 2006
Posts: 38
Location: Montigny-Le-Tileul / Belgique
|
 Posted: Mon Aug 27, 2007 10:56 am Post subject: [sata] "soft resetting port" Problèmes ? |
 |
|
Salut,
Voilà je viens de voir comme message dans le kernel ceci:
"ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen" (détails cf. code plus bas + sortie de smartctl)
Je ne sais pas trop ce que cela veut dire et si c'est grave ou non.....
Alors si quelqu'un peut m'éclairer là dessus....
Note: kernel 2.6.22.5 patché cfs 20.4 (arch amd64 SMP)
Merci
| Code: |
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 512 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 512 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
Sortie de "smartctl -a -d ata /dev/sda" :
| Code: |
smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3320620AS
Serial Number: 5QF477TS
Firmware Version: 3.AAK
User Capacity: 320.072.933.376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Aug 27 12:54:11 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 105 072 006 Pre-fail Always - 15224642
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 166
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 29863277
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1648
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 166
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Unknown_Attribute 0x0022 066 053 045 Old_age Always - 588644386
194 Temperature_Celsius 0x0022 034 047 000 Old_age Always - 34 (Lifetime Min/Max 0/18)
195 Hardware_ECC_Recovered 0x001a 063 045 000 Old_age Always - 238306100
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1648 -
# 2 Short offline Completed without error 00% 914 -
# 3 Extended offline Completed without error 00% 23 -
# 4 Short offline Completed without error 00% 22 -
# 5 Extended offline Interrupted (host reset) 90% 21 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
| Back to top |
|
 |
amaury.dg
n00b
Joined: 05 Feb 2006
Posts: 38
Location: Montigny-Le-Tileul / Belgique
|
| Posted: Tue Aug 28, 2007 5:00 pm Post subject: |
|
|
up ! :p
Personnes n'as d'idées là dessus ? |
|
| Back to top |
|
|
El_Goretto
Moderator
Joined: 29 May 2004
Posts: 3174
Location: Paris
|
| Posted: Tue Aug 28, 2007 9:18 pm Post subject: |
|
|
Ben si ça peut te rassurer, j'ai aussi des choses comme çà au boot de mon serveur (chipset VIA) depuis un noyau genre 2.6.19 ou pas loin. Comme j'avais pas de problèe avant, et que j'en ai pas non plus depuis, j'ai laissé de côté la chose 
_________________
-TrueNAS & jails: µ-serv Gen8 E3-1260L, 16Go ECC + µ-serv N40L, 10Go ECC
-Réseau: APU2C4 (OpenWRT) + GS726Tv3 + 2x GS108Tv2 + Archer C5v1 (OpenWRT) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
