| View previous topic :: View next topic |
| Author |
Message |
bebobero
n00b
Joined: 06 Jan 2008
Posts: 61
|
 Posted: Sun Jan 06, 2008 12:41 pm Post subject: Problems Compaq Presario (Ipw3945+Conexant Audio)-HelP Plz |
 |
|
Hello eveybody
I am currently a begginer on Gentoo Linux Kernel 2.6.19-r5 and I have a Compaq Presario V5000 series laptop and i have two major problems
1- My Laptop comes with a wireless adapter named ipw3945BG that does not work (tried iwlwifi , mac80211 and emerge ipw3945d, i also tried Intel Official driver! do i have to install network manager?) 
I think I have a problem in conf.d/net simply because it is empty
WHen running modprobe mac80211 i receive nothing, when doing LSMOd I get:
| Code: | iwl3945 147172 0
mac80211 98820 1 iwl3945
cfg80211 7816 1 mac80211
ipw3945 95392 0
ieee80211 26440 1 ipw3945
ieee80211_crypt 6784 1 ieee80211
firmware_class 10240 2 iwl3945,ipw3945 |
a- The Laptop Wireless Switch does not work and the wlan0 interface does not exist 
2- My Laptop has a conexant High Definition Audio Adapter that also does not work
a- The Laptop has 3 volume buttons That does not work also!
Regarding the wireless adapter i read about Lots of solutions but I can't get it to work.
I would really appreciate your Help to guide me in details for the easiest working solution.
Best Regards,
BeboBero
edit by nixnut: removed ridiculous font size and colour tags. |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54820
Location: 56N 3W
|
| Posted: Sun Jan 06, 2008 3:35 pm Post subject: |
|
|
bebobero,
Welcome to Gentoo. It looks like what you lack in experiance, you make up for with enthusiasm.
Post your lspci output and choose one problem to solve. If you work on both at the same time you will just become confused,
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
bebobero
n00b
Joined: 06 Jan 2008
Posts: 61
|
| Posted: Sun Jan 06, 2008 3:42 pm Post subject: |
|
|
Thank you very much
First I want to solve the Wireless problem because it is more important to me!
| Code: |
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
08:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
08:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
08:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
08:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
08:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 01) |
I really appreciate your help
[Removed colour tags from code section - NeddySeagoon]
Regards |
|
| Back to top |
|
|
bebobero
n00b
Joined: 06 Jan 2008
Posts: 61
|
| Posted: Sun Jan 06, 2008 3:48 pm Post subject: |
|
|
I am sorry for the colour and the font size.
I think i installed lots of stuff because i have errors on startup about missing ipw3945.ko
So is there anyway for cleaning up all those stuff!!
THanks again
Best regards,
BeboBEro |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54820
Location: 56N 3W
|
| Posted: Sun Jan 06, 2008 4:07 pm Post subject: |
|
|
bebobero,
You need two things for wireless to work
the right kernel module - this gives you wlan0
some wireless tools - to set up the wireless aspects of your interface
Your wireless interface may also need firmware to be loaded, in which case you need the firmware itself and kernel support for firmware loading.
First, your kernel module. The Intel PRO/Wireless 3945 with a 2.6.19-r5 kernel needs ipw3945 and several kernel patches. Thats a mess.
Your first step is therefore to update your kernel.
I guess from the kernel version, that you choose to install the binary kernel as used by the liveCD. If so, you still have to get kernel sources and compile your own kernel, since to make more kernel modules, a properly configured kernel source tree is required.
The handbook will help you there.
This page tells about the wireless tools you will need and the configuration for /etc/confg.d/net
Make time to read /etc/confg.d/net.example too. Its a fully commented /etc/confg.d/net file.
Your first step to to make and run your own kernel. Then we can add the other things
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
bebobero
n00b
Joined: 06 Jan 2008
Posts: 61
|
| Posted: Sun Jan 06, 2008 4:10 pm Post subject: THanks |
|
|
Thanks for the reply
Can i use genkernel? |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54820
Location: 56N 3W
|
| Posted: Sun Jan 06, 2008 4:53 pm Post subject: |
|
|
bebobero,
Yes, you can use genkernel but it will set up your hard drive controller incorrectly if you allow it to configure your kernel.
You must make these settings manually.
Be sure to use genkernels --menuconfig option, so it allows you to do that.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
bebobero
n00b
Joined: 06 Jan 2008
Posts: 61
|
| Posted: Sun Jan 06, 2008 5:38 pm Post subject: |
|
|
Ok i am formatiing my Hard drive and I am now reinstalling it again from the begining because as a beginner i know i messed a lot of conf files so a clean install would be great as i think!
Will keep you informed in an hour or two
Regards,
(Edit) After Installing and emerging genkernel, I typed genkernel --menuconfig all and then chose the settings you mentioned in your topic and after this I get
| Code: | Compiling 2.6.23-gentoo-r3 bzImage
Compiling 2.6.23-gentoo-r3 modules |
And then the computer is doing nothing so is this normal? |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54820
Location: 56N 3W
|
| Posted: Sun Jan 06, 2008 8:08 pm Post subject: |
|
|
bebobero,
It should have installed the modules into /lib/modules/2.6.23-gentoo-r3/...
and the bzImage into /boot where it will have a big name including "2.6.23-gentoo-r3" and "genkernel".
It may even update grub.conf for you. I don't use genkernel. Its ok to get you going but you will soon outgrow it.
It lets you put off until another day learning about building your own kernel.
Thats good as you have a lot of other stuff to learn just now.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
bebobero
n00b
Joined: 06 Jan 2008
Posts: 61
|
| Posted: Tue Jan 08, 2008 1:58 pm Post subject: |
|
|
OK i recompiled and now i want help on what to install to make my ipw3945BG wireless adapter to work.
Best regards,
BeboBero |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54820
Location: 56N 3W
|
| Posted: Tue Jan 08, 2008 7:40 pm Post subject: |
|
|
bebobero,
You should have a 2.6.23 kernel running now. Check with Do not continue until you have.
As I don't have a ipw3945 wireless, I will refer you to the gento-wiki with the usual health warning that anyone can edit a wiki, whatever their motives.
Follow the guide for kernels >=2.6.22
You will be rebuilding your kernel again. Every time you boot into a kernel for the first time, run and ask yourself if the date and time shown are the data and time that the kernel was built. If not, you are running the wrong kernel and the new drivers you made are not actually available.
The wiki takes you though installing the tools then refers you to a link for the setup. The handbook also covers the setup.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
bebobero
n00b
Joined: 06 Jan 2008
Posts: 61
|
| Posted: Tue Jan 08, 2008 7:44 pm Post subject: |
|
|
It worked I recompiled my kernel with support and IEEE and the switch Led flashed and when doing iwconfig it found eth1as a wireless device and it worked
i installed network manager as i have gnome but i have the following problem:
The NM-applet in the tray only appears after plugging the ethernet port, also If i remove the Ethernet cable the Small icon on the tray disappears and i can't associate with WIFI access point
Best regards,
BeboBero |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54820
Location: 56N 3W
|
| Posted: Tue Jan 08, 2008 8:50 pm Post subject: |
|
|
bebobero,
Well done! making the kernel is the hard part.
Now you can play with wireless tools to make your wireless work. Thats the configuration I mentioned earlier.
You can make all the settings manually with and then put your settings into /etc/conf.d/net.
Read /etc/conf.d/net.example to learn about the options.
You cannot normally operate both your interfaces on the same subnet or only one will be used.
As you have the driver installed, you may want to start another thread about the setup detail, as I don't have a chipset the same as yours.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
Networking & Security
