View previous topic :: View next topic |
Author |
Message |
clytle374 Apprentice
Joined: 01 Aug 2006 Posts: 221
|
Posted: Wed Feb 20, 2008 2:34 am Post subject: |
|
|
I got the svn and get the Code: | javac: invalid flag: -J-XX:ThreadStackSize=1536 | error.
I did try to remove and mask all version older than 1.7 but it tries to pull gcc4.3 and some ibm-jdk. Any other ideas?
I removed all the packages installed(except gcc 4.2.2) and decided to try fresh with icedtea-9999. Even after adding Code: | =dev-java/icedtea-9999=dev-java/icedtea-9999 | to package.keywords I get the Code: | - dev-java/icedtea-9999 (masked by: missing keyword). New one to me, why is that? |
Should I be trying to install 1.4 or -9999?
I also tried Quote: | Icedtea ebuild:
Code:
src_unpack() {
- unpack ${P}.tar.gz
+ unpack ${A}
Code:
src_compile() {
- local SUNJDK="$(java-config --select-vm=sun-jdk-1.7 -O)"
+ local SUNJDK="${JAVA_HOME}"
|
and it says the ebuild is corrupt _________________ NooB since RedHat 6.1 |
|
Back to top |
|
|
EliasP Guru
Joined: 06 Dec 2002 Posts: 318 Location: South-West Germany
|
Posted: Wed Feb 20, 2008 4:30 pm Post subject: |
|
|
clytle374 wrote: |
and it says the ebuild is corrupt |
Do a Code: | ebuild /path/to/your.ebuild digest | after modifying it.
Regards, Elias P. |
|
Back to top |
|
|
clytle374 Apprentice
Joined: 01 Aug 2006 Posts: 221
|
Posted: Wed Feb 20, 2008 8:07 pm Post subject: |
|
|
Now I get,
Code: | config.status: executing depfiles commands
mkdir -p bootstrap
rm -f bootstrap/jdk1.6.0
ln -sf /usr/lib/jvm/java-icedtea bootstrap/jdk1.6.0
if ! bootstrap/jdk1.6.0/bin/java -version ; \
then \
echo "bootstrap/jdk1.6.0/bin/java" \
"cannot be found or is corrupted." ; \
exit 1; \
fi
/bin/sh: bootstrap/jdk1.6.0/bin/java: No such file or directory
bootstrap/jdk1.6.0/bin/java cannot be found or is corrupted.
make: *** [stamps/bootstrap-directory-symlink.stamp] Error 1
*
* ERROR: dev-java/icedtea-1.4 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 4021: Called die
* The specific snippet of code:
* emake -j1 COMPILER_WARNINGS_FATAL=false MILESTONE=experimental BUILD_NUMBER=gentoo-${P} || die 'make failed'
* The die message:
* make failed
|
1.6 is installed I tried selecting it with eselect instead of 1.7 and get the same error.
So i tried the -9999 after adding keywords, and removing the line causing circular dependency.
Code: | >>> Unpacking source...
hg: unknown command 'fclone'
Mercurial Distributed SCM
|
-9999 pulled in mercurial, tried LoSeR_5150's quick and dirty and line 2 fails with.
Code: | hg clone http://www.terminus.org/hg/hgforest hgforest
abort: HTTP Error 404: Not Found
|
So which one should I be fighting with? _________________ NooB since RedHat 6.1 |
|
Back to top |
|
|
clytle374 Apprentice
Joined: 01 Aug 2006 Posts: 221
|
Posted: Thu Feb 21, 2008 6:39 pm Post subject: |
|
|
Any alternate to Code: | hg clone http://www.terminus.org/hg/hgforest hgforest
| ?? _________________ NooB since RedHat 6.1 |
|
Back to top |
|
|
gimpel Advocate
Joined: 15 Oct 2004 Posts: 2720 Location: Munich, Bavaria
|
Posted: Thu Feb 21, 2008 8:39 pm Post subject: |
|
|
Google, hit nr. 1: http://hg.akoha.org/hgforest/ _________________ http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
Back to top |
|
|
LoSeR_5150 Guru
Joined: 20 Mar 2005 Posts: 455 Location: San Francisco, CA
|
Posted: Thu Feb 21, 2008 9:23 pm Post subject: |
|
|
gimpel: http://hg.akoha.org/hgforest is just a log of changes, it isn't the actual repository... as far as I can tell anyhow.
clytle374: worst case scenario if no mirror can be found, i can just zip/tar/bz2 the directory and u can put it wherever you were going to clone the hgforest repo.
Update:
gimpel: my bad, you can clone the repo just fine using that link. I must have had a typo
clytle374: either clone that repo, or I can still send it as a zip/tar/bz2 _________________ Opteron 1356@2.4Ghz
6GB DDR2 800Mhz
128MB Quadro NVS 210S
640GB Western Digital HD
*Gentoo-x86_64-2.6.30-r1
Opteron175@2.2GHz
2GB DDR 400MHz
256MB Quadro 1400 Go
(2) 80GB Segate HDs: RAID0
*Gentoo-x86_64-2.6.30-r1 |
|
Back to top |
|
|
clytle374 Apprentice
Joined: 01 Aug 2006 Posts: 221
|
Posted: Thu Feb 21, 2008 11:21 pm Post subject: |
|
|
Thanks, I wasn't understanding if I was going to clone "a forest" or the "forest".
I cloned and got mercurial/forest.py and friends, looks good.
I have in /etc/mercurial/hgrc
Code: |
[extensions]
hgext.forest=/usr/local/hgforest/forest.py |
I also did try /etc/mercurial/.hgrc both with the same results.
b33fc0d3 said
Code: | Also, make sure you have my eclass/mercurial.eclass, otherwise portage won't read /etc/mercurial/hgrc |
Which I don't understand. I did search it but I don't understand what I'm trying to do with the eclass, mercurial is in the inherit section in the ebuild.
I tried icedtea-bin and it silently fails, so help here would be greatly appreciated.
EDIT: hg fclone works on command line.
EDIT2: /usr/portage/eclass/mercurial.eclass does exist, does it need modified? Or something else added? _________________ NooB since RedHat 6.1 |
|
Back to top |
|
|
gimpel Advocate
Joined: 15 Oct 2004 Posts: 2720 Location: Munich, Bavaria
|
Posted: Fri Feb 22, 2008 8:51 am Post subject: |
|
|
In b33fc0d3's overlay is a modified one, yes. Put that in your overlay were the icedtea-9999 ebuild is ($PORTDIR_OVERLAY/eclass) _________________ http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
Back to top |
|
|
clytle374 Apprentice
Joined: 01 Aug 2006 Posts: 221
|
Posted: Fri Feb 22, 2008 4:52 pm Post subject: |
|
|
gimpel wrote: | In b33fc0d3's overlay is a modified one, yes. Put that in your overlay were the icedtea-9999 ebuild is ($PORTDIR_OVERLAY/eclass) |
OK, learned a few things so far. I didn't catch that existed, makes sense.
And up next: Code: | >>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-java/icedtea-9999/work/icedtea ...
!!! ERROR: The vm could not be found
* JDK:
|
EDIT: Fixed this changing ebuild line
Quote: |
Code: | local JDK="$(java-config --select-vm=icedtea-1.7 -O)" |
To
Code: | local JDK="${JAVA_HOME}" |
This solved that error, but still fails as below. (Don't follow me I'm lost too)
|
END EDIT
Then fails with: Code: | mkdir -p bootstrap
rm -f bootstrap/jdk1.6.0
ln -sf /usr/lib/jvm/java-icedtea bootstrap/jdk1.6.0; \
if ! bootstrap/jdk1.6.0/bin/java -version ; \
then \
echo "bootstrap/jdk1.6.0/bin/java" \
"cannot be found or is corrupted." ; \
exit 1; \
fi
/bin/sh: line 1: bootstrap/jdk1.6.0/bin/java: No such file or directory
|
Where did this command come from?
Code: | java-config -L
The following VMs are available for generation-2:
1) Sun JDK 1.6.0.03 [sun-jdk-1.6]
*) Sun JDK 1.7.0.0_alpha24 [sun-jdk-1.7]
|
And
Code: | readlink /var/tmp/portage/dev-java/icedtea-1.4/work/icedtea-1.4/bootstrap/jdk1.6.0
/opt/sun-jdk-1.7.0.0_alpha24 |
Suggestions or reading assignments welcome. _________________ NooB since RedHat 6.1 |
|
Back to top |
|
|
clytle374 Apprentice
Joined: 01 Aug 2006 Posts: 221
|
Posted: Sat Feb 23, 2008 5:31 am Post subject: |
|
|
I couldn't find the command to change it, so I made the directory it was asking for and copied what I think it wants into it. Error solved?
But since I'm such a lucky person, it breaks again with. Code: |
Checking patches/icedtea-gcc-4.3.patch
1 out of 1 hunk FAILED -- saving rejects to file openjdk/hotspot/src/share/vm/adlc/adlc.hpp.rej
2 out of 2 hunks FAILED -- saving rejects to file openjdk/hotspot/src/share/vm/adlc/filebuff.hpp.rej
1 out of 1 hunk FAILED -- saving rejects to file openjdk/hotspot/build/linux/makefiles/gcc.make.rej
ERROR patch patches/icedtea-gcc-4.3.patch FAILED!
WARNING make clean-patch before retrying a fix
make: *** [stamps/patch.stamp] Error 1
|
So I need gcc-4.3?
Or kill this patch? if so how?
EDIT: I finally got icedtea-bin working and gave up on this! _________________ NooB since RedHat 6.1 |
|
Back to top |
|
|
LoSeR_5150 Guru
Joined: 20 Mar 2005 Posts: 455 Location: San Francisco, CA
|
Posted: Mon Feb 25, 2008 10:23 pm Post subject: |
|
|
I'm getting this error as well now. I'm thinking of trying to compile this with GCC 4.3 and seeing what happends.
Update: I compiled then switched to GCC 4.3 and I am still receiving the same error. I am now trying to build the source manually. Or does anyone know how to fix/remove the offending patch? Thanks _________________ Opteron 1356@2.4Ghz
6GB DDR2 800Mhz
128MB Quadro NVS 210S
640GB Western Digital HD
*Gentoo-x86_64-2.6.30-r1
Opteron175@2.2GHz
2GB DDR 400MHz
256MB Quadro 1400 Go
(2) 80GB Segate HDs: RAID0
*Gentoo-x86_64-2.6.30-r1 |
|
Back to top |
|
|
LoSeR_5150 Guru
Joined: 20 Mar 2005 Posts: 455 Location: San Francisco, CA
|
Posted: Wed Feb 27, 2008 12:06 am Post subject: |
|
|
Tried to built the sources manually as per iced-tea.org
Code: | ./configure --with-ecj=/usr/bin/ecj-3.3 --with-ecj-jar=/usr/share/eclipse-ecj-3.3/lib/ecj.jar --with-libgcj-jar=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.3.0-pre20080223/java/libgcj-4.3.0-pre20080223.jar --with-gcj-home=/usr/lib/gcj-4.3.0-pre20080223-9/ --with-javac=/opt/sun-jdk-1.7.0.0_alpha24/bin/javac --with-java=/opt/sun-jdk-1.7.0.0_alpha24/ |
Code: | /usr/local/icedtea/openjdk-ecj/build/linux-amd64/corba/tmp/sun/com.sun.corba.se.internal.io/ioser12/obj64/ioser.o -L/usr/local/icedtea/bootstrap/jdk1.6.0/jre/lib/amd64/ -ljvm -L/usr/local/icedtea/bootstrap/jdk1.6.0/jre/lib/amd64 -lgcj -L/usr/local/icedtea/bootstrap/jdk1.6.0/jre/lib/amd64/ -ljvm -lc
/usr/lib/gcc/x86_64-pc-linux-gnu/4.3.0-pre20080223/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -ljvm
collect2: ld returned 1 exit status
make[5]: *** [/usr/local/icedtea/openjdk-ecj/build/linux-amd64/corba/lib/amd64/libioser12.so] Error 1
make[5]: Leaving directory `/usr/local/icedtea/openjdk-ecj/corba/make/sun/corba/core'
make[4]: *** [build] Error 1
make[4]: Leaving directory `/usr/local/icedtea/openjdk-ecj/corba/make/sun/corba'
make[3]: *** [build] Error 1
make[3]: Leaving directory `/usr/local/icedtea/openjdk-ecj/corba/make/sun'
make[2]: *** [build] Error 1
make[2]: Leaving directory `/usr/local/icedtea/openjdk-ecj/corba/make'
make[1]: *** [corba-build] Error 2
make[1]: Leaving directory `/usr/local/icedtea/openjdk-ecj'
make: *** [stamps/icedtea-ecj.stamp] Error 2 |
Can anyone make sense of this? Thanks _________________ Opteron 1356@2.4Ghz
6GB DDR2 800Mhz
128MB Quadro NVS 210S
640GB Western Digital HD
*Gentoo-x86_64-2.6.30-r1
Opteron175@2.2GHz
2GB DDR 400MHz
256MB Quadro 1400 Go
(2) 80GB Segate HDs: RAID0
*Gentoo-x86_64-2.6.30-r1 |
|
Back to top |
|
|
b33fc0d3 Retired Dev
Joined: 22 Jun 2006 Posts: 128
|
Posted: Thu Mar 13, 2008 3:55 am Post subject: |
|
|
Testing some new ebuilds IcedTea 1.6 & 9999, will update you guys soon. |
|
Back to top |
|
|
Need4Speed Guru
Joined: 06 Jun 2004 Posts: 497
|
Posted: Fri Mar 14, 2008 10:57 pm Post subject: |
|
|
So can IcedTea be built from source now? If so, which ebuild should I use? |
|
Back to top |
|
|
GNUtoo Veteran
Joined: 05 May 2005 Posts: 1919
|
Posted: Sun Mar 16, 2008 4:05 pm Post subject: |
|
|
Need4Speed wrote: | So can IcedTea be built from source now? If so, which ebuild should I use? |
me too i'd like an ebuild for building from source but for x86...so i could try games such as jrisk...(don't need java anymore for university) |
|
Back to top |
|
|
MalleRIM Guru
Joined: 23 Jul 2007 Posts: 563 Location: China
|
Posted: Sun Mar 23, 2008 2:57 pm Post subject: |
|
|
I get following error:
Code: | Package libxul was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxul.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libxul' found
checking for XULRUNNER... configure: error: Package requirements ( nspr mozilla-js mozilla-plugin libxul-embedding >= 1.9pre) were not met:
No package 'mozilla-js' found
No package 'mozilla-plugin' found
No package 'libxul-embedding' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables XULRUNNER_CFLAGS
and XULRUNNER_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details. |
I tried to compile against mozilla-firefox-3 as xulrunner wont work (I have 1.8 installed)
emerge --info:
Code: | Portage 2.1.4.4 (default-linux/amd64/dev/2008.0/desktop, gcc-4.2.0, glibc-2.6.1-r0, 2.6.24-gentoo-r3 x86_64)
=================================================================
System uname: 2.6.24-gentoo-r3 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
Timestamp of tree: Sun, 23 Mar 2008 13:00:01 +0000
app-shells/bash: 3.2_p17-r1
dev-java/java-config: 1.3.7, 2.1.4
dev-lang/python: 2.5.1-r5
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.13, 2.61-r1
sys-devel/automake: 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 1.5.26
virtual/os-headers: 2.6.23-r3
ACCEPT_KEYWORDS="amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -O2 -pipe -msse3"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-march=k8 -O2 -pipe -msse3"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer parallel-fetch sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/"
LANG="de_DE.UTF-8"
LC_ALL="de_DE.UTF-8"
LINGUAS="de"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/portage/local/layman/mozilla /usr/portage/local/layman/gnash-cvs /usr/portage/local/private_overlay"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext X a52 aac acl acpi alsa amd64 async avahi bash-completion berkdb cairo cdr cli cracklib crypt cups dbus dri dvd dvdr dvdread eds emboss encode esd evo fam ffmpeg firefox flac fortran gcj gdbm gif gnome gnutls gpm gstreamer gtk hal iconv isdnlog java jpeg kerberos ldap mad midi mikmod mmx mmxext mp3 mpeg mudflap musepack ncurses nfs nls nptl nptlonly nsplugin ogg opengl openmp oss pam pcre pdf perl png ppds pppd python qt3support quicktime rar readline reflection samba sdl session smp spell spl sse sse2 ssl startup-notification svg symlink tcpd theora tiff truetype type1 unicode usb vorbis xml xorg xulrunner xv xvid zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INITNG_PLUGINS="also bash_launcher chdir chroot conflict cpout critical ctrlaltdel daemon_clean debug_commands envparser find fmon fstat history idleprobe initctl interactive iparser last limit lockfile logfile netdev netprobe ngc4 ngcs nge pause provide reload renice rlparser simple_launcher stcmd stdout suid syncron syslog sysreq unneeded usplash" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="de" USERLAND="GNU" VIDEO_CARDS="nvidia"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS |
I'll try to find a workaround but it should be fixed in the ebuild, too |
|
Back to top |
|
|
b33fc0d3 Retired Dev
Joined: 22 Jun 2006 Posts: 128
|
Posted: Fri Mar 28, 2008 4:26 pm Post subject: |
|
|
IcedTea is now in the java-experimental overlay.
Last edited by b33fc0d3 on Mon Apr 21, 2008 12:23 pm; edited 1 time in total |
|
Back to top |
|
|
LoSeR_5150 Guru
Joined: 20 Mar 2005 Posts: 455 Location: San Francisco, CA
|
Posted: Fri Mar 28, 2008 5:40 pm Post subject: |
|
|
Tested the new 1.6 ebuild.... compiled fine but fails on install...
snippet of code:
Code: | IcedTea is served: openjdk/build/linux-amd64
>>> Source compiled.
>>> Test phase [not enabled]: dev-java/icedtea-1.6
>>> Install icedtea-1.6 into /var/tmp/portage/dev-java/icedtea-1.6/image/ category dev-java
/var/tmp/portage/dev-java/icedtea-1.6/temp/environment: line 4558: cd: /var/tmp/portage/dev-java/icedtea-
1.6/work/icedtea-1.6/openjdk/control/build/linux-amd64/: No such file or directory
* QA Notice: USE Flag 'doc' not in IUSE for dev-java/icedtea-1.6
/var/tmp/portage/dev-java/icedtea-1.6/temp/environment: line 4562: cd: j2sdk-image: No such file or direc
tory
cp: cannot stat `bin': No such file or directory
cp: cannot stat `include': No such file or directory
cp: cannot stat `jre': No such file or directory |
then it installs the 'lib' folder
then...
Code: | cp: cannot stat `man': No such file or directory
*
* ERROR: dev-java/icedtea-1.6 failed.
* Call stack:
* ebuild.sh, line 49: Called src_install
* environment, line 4569: Called die
* The specific snippet of code:
* cp -vRP bin include jre lib man "${ddest}" || die "failed to copy";
* The die message:
* failed to copy
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/log/portage/dev-java:icedtea-1.6:20080328-165228.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-java/icedtea-1.6/temp/environment'.
* This ebuild used the following eclasses from overlays:
* /usr/local/portage/eclass/mercurial.eclass
* This ebuild is from an overlay: '/usr/local/portage/'
*
!!! When you file a bug report, please include the following information:
GENTOO_VM= CLASSPATH="" JAVA_HOME=""
JAVACFLAGS="" COMPILER=""
and of course, the output of emerge --info
|
so close yet so far away... _________________ Opteron 1356@2.4Ghz
6GB DDR2 800Mhz
128MB Quadro NVS 210S
640GB Western Digital HD
*Gentoo-x86_64-2.6.30-r1
Opteron175@2.2GHz
2GB DDR 400MHz
256MB Quadro 1400 Go
(2) 80GB Segate HDs: RAID0
*Gentoo-x86_64-2.6.30-r1 |
|
Back to top |
|
|
b33fc0d3 Retired Dev
Joined: 22 Jun 2006 Posts: 128
|
Posted: Fri Mar 28, 2008 6:53 pm Post subject: |
|
|
Fixed in latest revision. r34 on svn. |
|
Back to top |
|
|
b33fc0d3 Retired Dev
Joined: 22 Jun 2006 Posts: 128
|
Posted: Sun Mar 30, 2008 12:52 pm Post subject: New Home |
|
|
IcedTea is now in the java-experimental overlay. |
|
Back to top |
|
|
billydv l33t
Joined: 22 Dec 2006 Posts: 911 Location: Mount Vernon, NY
|
Posted: Sun Mar 30, 2008 1:54 pm Post subject: |
|
|
I just wanted to mention, I know you are trying hard to get this to compile and install, but I have been using an ebuild for a few months that has worked perfectly, Its a binary version of Iced Tea but the ebuild builds, completes, installs and works perfectly.
I don't remember where I got it but here is the ebuild and files
http://filebin.ca/oxdxu/dev-java.tar.gz _________________ Billy DeVincentis |
|
Back to top |
|
|
loftwyr l33t
Joined: 29 Dec 2004 Posts: 970 Location: 43°38'23.62"N 79°27'8.60"W
|
Posted: Sun Mar 30, 2008 1:59 pm Post subject: |
|
|
The test for the forest extension fails.
Using the help command says no fgclone command but it is listed in the command list and works fine from the command line. is there a file besides forest.py I should be installing?
EDIT: the ebuild is testing for fclones not fclone. Small fix needed. _________________ My emerge --info
Have you run revdep-rebuild lately? It's in gentoolkit and it's worth a shot if things don't work well.
Celebrating 5 years of Gentoo-ing. |
|
Back to top |
|
|
b33fc0d3 Retired Dev
Joined: 22 Jun 2006 Posts: 128
|
Posted: Sun Mar 30, 2008 3:00 pm Post subject: |
|
|
loftwyr wrote: | Small fix needed. |
You are right, fixed in overlay. |
|
Back to top |
|
|
Need4Speed Guru
Joined: 06 Jun 2004 Posts: 497
|
Posted: Sun Mar 30, 2008 3:17 pm Post subject: |
|
|
Is there a reason why you are using 1.6 and not 1.7 for your ebuild? I have the binary version of 1.7 installed, should I use the 1.6 from source instead? |
|
Back to top |
|
|
billydv l33t
Joined: 22 Dec 2006 Posts: 911 Location: Mount Vernon, NY
|
Posted: Sun Mar 30, 2008 3:47 pm Post subject: |
|
|
Need4Speed, The binary version is a few months old and I believe they want to set up an ebuild that will build iced tea in place, not use a binary. Unless you have a need for the newest version from source which they are putting together, stick with the binary as it seems to work well and no problems, BTW, I realized the file I posted is from the arcon overlay. _________________ Billy DeVincentis |
|
Back to top |
|
|
|