| View previous topic :: View next topic |
| Author |
Message |
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
 Posted: Wed Sep 03, 2003 1:07 pm Post subject: doppio schermo [Risolto] |
 |
|
Allora... Ho raccattato un monitor LCD e vorei usarlo come secondo schermo sulla mia matrox g550. Ho cercato un po' in giro ma non ho trovato nulla di utile, non so proprio da che parte cominciare.
Attualmente collegando il secondo schermo la visuale e' ovviamente schiacciata visto che le frequenze di refresh utilizzate sono quelle dello schermo 1, il problema principale sarebbe appunto specificare frequenze diverse per i due monitor. Qualcuno ha esperienze di dual-screen e sarebbe cosi' gentile da postarmi il suo XF86Config?
tnx 
_________________
~~ Per amore della rosa si sopportano le spine... ~~
Last edited by flocchini on Fri Sep 05, 2003 3:19 pm; edited 1 time in total |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31493
Location: here
|
| Posted: Wed Sep 03, 2003 1:18 pm Post subject: |
|
|
Non ho esperienza ma forse questo link potrebbe esserti utile.
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Wed Sep 03, 2003 2:10 pm Post subject: |
|
|
Mi ricordo che con la mia vecchia G400 MAX avevo una serie di utility "by matrox" che gestivano la scheda e se non ricordo male anche il dual-head. Al momento non ricordo come si chiamassero (le usavo con debian), in portage l'unica cosa che si avvicina sono le "media-video/matroxset", magari dacci un'occhiata. Tienici informato che potrebbe interessarmi (la G400 va ancora alla grande  )
_________________
Se per vivere ti dicono "siediti e stai zitto" tu alzati e muori combattendo |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Wed Sep 03, 2003 9:13 pm Post subject: |
|
|
Qui non c'è nulla?
Paolo
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Thu Sep 04, 2003 12:09 pm Post subject: |
|
|
nada de nada... Vi posto il mio XF86Config, spero che a voi salti all'occhio qsa che a me e' sfuggito...
| Code: | # File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
Load "GLcore"
# This loads the DRI module
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "compaq7500"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-70
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-140
vendorname "compaq"
modelname "7500"
ModeLine "1024x768/85Hz" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
ModeLine "1024x768/70Hz" 75 1024 1048 1184 1328 768 771 777 806 -HSync -VSync
EndSection
###############################
Section "Monitor"
Identifier "NEC"
VendorName "NEC"
ModelName "1525M"
HorizSync 24.8-60
VertRefresh 56.2-85.1
#ModeLine "1024x480" 65.00 1024 1032 1176 1344 \ 480 488 494 563
#ModeLine "768x576" 50.00 768 832 846 1000 \ 576 590 595 630
#ModeLine "768x576" 63.07 768 800 960 1024 \ 576 578 590 616
ModeLine "1024x768/85Hz" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
ModeLine "1024x768/70Hz" 75 1024 1048 1184 1328 768 771 777 806 -HSync -VSync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "G550_1"
VendorName "Matrox"
BoardName "Matrox G550"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
Chipset "mgag550"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "mga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
BusID "PCI:2:00:0"
# VideoRam 256
# Clocks 25.2 28.3
Screen 0
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "G550_2"
Driver "mga"
#VideoRam 32768
# Insert Clocks lines here if appropriate
vendorname "Generic"
boardname "mga"
BusID "PCI:2:00:0"
screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "G550_1"
Monitor "compaq7500"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768/70Hz" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768/70Hz" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768/70Hz" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
EndSection
####################################
Section "Screen"
Identifier "Screen 2"
Device "G550_2"
Monitor "NEC"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768/85Hz" "800x600" "640x480"
ViewPort 0 1
Virtual 0 1
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768/85Hz" "800x600" "640x480"
ViewPort 0 1
Virtual 0 1
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768/85Hz" "800x600" "640x480"
ViewPort 0 1
Virtual 0 1
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
#Section "ServerLayout"
# The Identifier line must be present
# Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
#Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
#InputDevice "Mouse1" "CorePointer"
#InputDevice "Keyboard1" "CoreKeyboard"
#EndSection
# Section "DRI"
# Mode 0666
# EndSection
#Section "InputDevice"
#Identifier "Keyboard"
#Option "XkbModel" "pc104"
#Option "XkbLayout" "us"
#Driver "keyboard"
#EndSection
#Section "InputDevice"
#Identifier "Mouse"
#Option "Protocol" "MouseManPlusPS/2"
#Option "Device" "/dev/psaux"
#Driver "mouse"
#Option "ZAxisMapping" "4 5"
#EndSection
###############
Section "ServerLayout"
Identifier "layout1"
Screen "screen 1" LeftOf "screen 2"
Screen "screen 2"
Option "Xinerama" "true"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Driver "mouse"
EndSection
|
Mi sta facnedo diventar pazzo sto trabiccolo 
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
johnnystuff
Tux's lil' helper
Joined: 28 Aug 2003
Posts: 141
|
| Posted: Thu Sep 04, 2003 2:58 pm Post subject: |
|
|
Nella sezione "Graphics device" definisci giustamente le due head con "g550_1" e "g550_2" a cui associ, altrettanto giustamente, gli "Screen 0" e "Screen 1". Visto anche che la tua scheda è una dual head e che il numero degli Screen deve essere sempre compreso tra 0 e "n°_uscite -1", non capisco come mai nella sezione "Screen Device" hai definito Screen 1 e 2........
|
|
| Back to top |
|
|
Yans
Apprentice
Joined: 09 Feb 2003
Posts: 171
Location: [TI] Switzerland
|
| Posted: Thu Sep 04, 2003 6:18 pm Post subject: |
|
|
ma scussa usa il programmino mgapdesk della matrox fatto a posta per il dualhead in linux http://www.matrox.com/mga/support/drivers/files/lnx_30.cfm
_________________
¿ Which do ARMS obtain, the peace in the future or the nightmare in the past ?
"There are only 10 types of people in the world: Those who understand binary, and those who don't" |
|
| Back to top |
|
|
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Thu Sep 04, 2003 6:26 pm Post subject: |
|
|
Grande! E' quello il programmino che dicevo usare con debian! 
_________________
Se per vivere ti dicono "siediti e stai zitto" tu alzati e muori combattendo |
|
| Back to top |
|
|
flocchini
Veteran
Joined: 17 May 2003
Posts: 1124
Location: Milano, Italy
|
| Posted: Fri Sep 05, 2003 12:45 pm Post subject: |
|
|
Ora ci do un'occhiata, cmq ho gia' risolto x conto mio copiando il file generato da sax2 su SuSE (il primo amore non si scorda mai)
| Code: |
# XF86Config
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "extmod"
Load "freetype"
Load "v4l"
Load "type1"
Load "speedo"
EndSection
Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "MapName" "Standard Keyboard [ pc102 ]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc101"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "ps/2"
Option "Vendor" "Sysp"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 320 240
HorizSync 30-70
Identifier "Monitor[0]"
ModelName "1024X768@85HZ"
VendorName "--> VESA"
VertRefresh 50-140
UseModes "Modes[0]"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
HorizSync 24-60
Identifier "Monitor[1]"
ModelName "MULTISYNC LCD1525M"
Option "DPMS"
VendorName "NEC"
VertRefresh 56-75
UseModes "Modes[1]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
EndSection
Section "Modes"
Identifier "Modes[1]"
Modeline "640x480" 25.96 640 656 720 864 480 480 489 501
Modeline "640x480" 29.95 640 656 720 864 480 480 489 501
Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800
Modeline "640x480" 25.96 640 656 720 864 480 480 489 501
Modeline "640x480" 29.95 640 656 720 864 480 480 489 501
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[1]"
Identifier "Screen[1]"
Monitor "Monitor[1]"
EndSection
Section "Device"
BoardName "G550"
BusID "2:0:0"
Driver "mga"
Identifier "Device[0]"
Option "NoHal"
Option "hwcursor" "off"
Screen 0
VendorName "Matrox"
EndSection
Section "Device"
BoardName "G550"
BusID "2:0:0"
Driver "mga"
Identifier "Device[1]"
Option "NoHal"
Option "hwcursor" "off"
Screen 1
VendorName "Matrox"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "on"
Screen "Screen[0]"
Screen "Screen[1]" RightOf "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
|
_________________
~~ Per amore della rosa si sopportano le spine... ~~ |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
