Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
USB mass storage in VBox guests [solved]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
gr0x0rd
Guru
Guru


Joined: 12 Aug 2006
Posts: 311

PostPosted: Wed Jan 14, 2009 6:18 am    Post subject: USB mass storage in VBox guests [solved] Reply with quote

Hello all,

Been having a really strange issue for months and months, still trying to work it out. I'm using the latest binary ebuild of virtualbox (2.0.6) and try as I might, I can't get a USB thumb drive to work in a Vista or 7 guest VM. Before anyone suggests shared folders or anything like that, I don't want to transfer data- I'm currently doing a project developing software that runs on pen drives, so having access to different flavors of windoze quick and easy is fantastic for testing.

I've read all the VBox/USB posts on the forum; only one post appears similar, but I can't be sure it's the same issue. The device is recognized as a USB Flash Disk, and the guest os begins installing the driver. The driver installation always ends in failure (please contact the device manufacturer etc). In device manager, the device properties shows
Code:
This device cannot start. (Code 10)

Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I have tried 3 different brands of flash drives (Kingston, Sandisk, NetCom) and multiple versions of usbstor.sys in the guests, with no effect. Flash card readers fail in the exact same way.

Some interesting facts:

-the devices work perfectly with my XP guest: only Vista/7 guests exhibit the issue.
-there is no issue on a Vista host using the exact same version of VBox with guests created using the exact same os install disks and the exact same flash drives.
-my Microsoft VX1000 USB webcam and other USB devices install properly. (????)

Additional info:
-issue has persisted since first installing VBox 1.6.
-running kernel version 2.6.25-gentoo-r8, full EHCI support enabled.
-using gnome desktop (usb devices are automounted). <--- possible culprit??
-I am a member of the usb and plugdev groups.
-added and entry for usbfs in my fstab consistent with other posts and VBox user manual, no effect.

I have googled myself blue in the face on this one, thinking that this must be an issue with the guest os, but all of the fixes (including some that I've done on actual pcs running Vista) get me nowhere.

Any suggestions for troubleshooting this issue are welcome... phew. But if anyone could answer the following, this is what I would really like to know: has anyone managed to get USB mass storage devices working properly using Virtualbox in a Vista guest with a gentoo host?

Many thanks...
_________________
~g
emerge -FML...


Last edited by gr0x0rd on Sun Jul 05, 2009 2:33 am; edited 1 time in total
Back to top
View user's profile Send private message
ak47gen
n00b
n00b


Joined: 15 Feb 2007
Posts: 43

PostPosted: Wed Jan 14, 2009 11:36 am    Post subject: Reply with quote

What motherboard you have or northbridge chipset?

Also is USB mass storage complied on your kernel?
Back to top
View user's profile Send private message
gr0x0rd
Guru
Guru


Joined: 12 Aug 2006
Posts: 311

PostPosted: Thu Jan 15, 2009 7:30 pm    Post subject: Reply with quote

Hi, thanks for the reply... I've got an Asus P5B mobo, and yes I have USB mass storage built into my kernel- all the devices work just fine in Gentoo. lspci info:
Code:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc R580 [Radeon X1900 XT] (Primary)
01:00.1 Display controller: ATI Technologies Inc R580 [Radeon X1900 XT] (Secondary)
02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)


_________________
~g
emerge -FML...
Back to top
View user's profile Send private message
ak47gen
n00b
n00b


Joined: 15 Feb 2007
Posts: 43

PostPosted: Mon Jan 19, 2009 7:52 am    Post subject: Reply with quote

Try using the XP usb mass storage drive on your vista machine. That and also update your virtualbox modules along with the ose. Also is this a standard copy of vista?
Back to top
View user's profile Send private message
manwe_
l33t
l33t


Joined: 01 Feb 2006
Posts: 650
Location: Universe

PostPosted: Mon Feb 02, 2009 11:40 pm    Post subject: Reply with quote

Try disabling EHCI (USB 2.0) in guest machine options.
Back to top
View user's profile Send private message
gr0x0rd
Guru
Guru


Joined: 12 Aug 2006
Posts: 311

PostPosted: Sun Jul 05, 2009 2:33 am    Post subject: Reply with quote

All devices working with the release of vbox 2.2.4! :)
_________________
~g
emerge -FML...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Unsupported Software All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum