| View previous topic :: View next topic |
| Author |
Message |
Tjoxen
n00b
Joined: 02 Sep 2003
Posts: 6
Location: Sundsvall / Sweden
|
 Posted: Mon Sep 29, 2003 12:57 pm Post subject: Gentoo on a HP nx7000 |
 |
|
Hello
I just wanted to say that Gentoo 1.4 works great on my HP nx7000 laptop.
I run genkernel vid gentoo-sources 2.4.20-r7 and it detects all the hardware. (bluetooth, touchpad with scroll function etc.)
I havn't tried to get the wlan to work yet, but it's just an intel chipset so that couldn't be hard?
Even the resolution 1680x1050 works without problems.
Just telling this if someone is about to buy a new laptop!
The only thing is that you have to install grub with the --no-floppy option, otherwise it will cause a segmentation fault.
 |
|
| Back to top |
|
 |
Joffer
Guru
Joined: 10 Sep 2002
Posts: 585
Location: Arendal, Norway
|
| Posted: Tue Sep 30, 2003 12:00 am Post subject: |
|
|
I'm just about to compile Gentoo from stage 1 on the same hardware.
What CFLAGS did you use?
What does /proc/cpuinfo say? Is the CPU listed with 0KB cache or 1MB?
Btw, you won't get the WLAN up, since Intel hasn't released any info/drivers etc about the chip.. searching the forums will give you lots of confirmation on this.. you could however, remove the mini-pci card (located under the top right lid on the bottom of your computer (where the WinXP serial is stuck)) and get another mini-pci card that's supported, or just get a pcmcia card.
Which version of nx7000 do you have? The 1.4GHz (with CD-RW) or 1.6GHz with DVD+RW... ohh.. I'd guess the latter one, since you said 1680x1024 resolution  Same as me This baby is gonna rock when I get everything up and running (with 1GB DDR RAM  and a 60GB 5400rpm harddrive)
Update: Stage 1 completed (scripts/bootstrap.sh) in:
| Code: | real 152m299.506s
user 59.36.920s
sys 85m43.880s |
/proc/cpuinfo says 0KB cache 
Update2: Stage 2 completed (emerge system) in:
| Code: | real 47m8.048s
user 26m48.250s
sys 8m13.940s |
|
|
| Back to top |
|
|
dargosch
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 101
|
| Posted: Tue Mar 23, 2004 6:56 pm Post subject: Re: Gentoo on a HP nx7000 |
|
|
| Tjoxen wrote: | Hello
I just wanted to say that Gentoo 1.4 works great on my HP nx7000 laptop.
I run genkernel vid gentoo-sources 2.4.20-r7 and it detects all the hardware. (bluetooth, touchpad with scroll function etc.)
I havn't tried to get the wlan to work yet, but it's just an intel chipset so that couldn't be hard?
Even the resolution 1680x1050 works without problems.
Just telling this if someone is about to buy a new laptop!
The only thing is that you have to install grub with the --no-floppy option, otherwise it will cause a segmentation fault.
|
I got the nx7010 one, and I really like it.. but the touchpad is strange.. would you mid posting info on yout touchpad setup.. 
_________________
Registered Linux user #163029 http://counter.li.org/
My Gentoo + PVR-350 + IVTV + MythTV blog is on
http://gentoomythtv.blogspot.com/ |
|
| Back to top |
|
|
pascalbrax
Apprentice
Joined: 21 Jan 2004
Posts: 280
Location: 127.0.0.1
|
| Posted: Wed Apr 07, 2004 11:28 pm Post subject: |
|
|
i have bought the nx7010 and i'm waiting for the delivering... can you just tell me some hints about the install? i'm feeling better with lilo instead of grub, is this safe?
_________________
"One World, One web, One program" - Microsoft Promo ad.
"Ein Volk, Ein Reich, Ein Führer" - Adolf Hitler |
|
| Back to top |
|
|
dargosch
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 101
|
|
| Back to top |
|
|
sear
Tux's lil' helper
Joined: 15 Mar 2004
Posts: 113
|
| Posted: Thu Apr 08, 2004 6:48 am Post subject: |
|
|
i have got the same notebook nx7000 with the gentoo dev sources of the kernel 2.6.3-r1 and it works great too!!
love the notebook =) |
|
| Back to top |
|
|
dargosch
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 101
|
| Posted: Thu Apr 08, 2004 8:23 am Post subject: |
|
|
| sear wrote: | i have got the same notebook nx7000 with the gentoo dev sources of the kernel 2.6.3-r1 and it works great too!!
love the notebook =) |
Can you blank DVD-RWs?
_________________
Registered Linux user #163029 http://counter.li.org/
My Gentoo + PVR-350 + IVTV + MythTV blog is on
http://gentoomythtv.blogspot.com/ |
|
| Back to top |
|
|
pascalbrax
Apprentice
Joined: 21 Jan 2004
Posts: 280
Location: 127.0.0.1
|
| Posted: Sat Apr 10, 2004 11:43 pm Post subject: |
|
|
what kind of cpu should i set for the CFLAGS and the kernel config? pentium 3 or pentium 4?
_________________
"One World, One web, One program" - Microsoft Promo ad.
"Ein Volk, Ein Reich, Ein Führer" - Adolf Hitler |
|
| Back to top |
|
|
dargosch
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 101
|
| Posted: Mon Apr 12, 2004 12:52 pm Post subject: |
|
|
| pascalbrax wrote: | | what kind of cpu should i set for the CFLAGS and the kernel config? pentium 3 or pentium 4? |
I used
| Code: |
CFLAGS="-O3 -march=pentium3 -mmmx -msse -mfpmath=sse -fomit-frame-pointer -pipe"
CHOST="i686-pc-linux-gnu"
|
I'm sure there are more optimized flags..
_________________
Registered Linux user #163029 http://counter.li.org/
My Gentoo + PVR-350 + IVTV + MythTV blog is on
http://gentoomythtv.blogspot.com/ |
|
| Back to top |
|
|
pascalbrax
Apprentice
Joined: 21 Jan 2004
Posts: 280
Location: 127.0.0.1
|
| Posted: Mon Apr 12, 2004 1:16 pm Post subject: |
|
|
thank you a lot... now i have my kde working fine 
i just got some problems with my ati and the sound dev...
the real pain now is that damned wifi and bluetooth...
_________________
"One World, One web, One program" - Microsoft Promo ad.
"Ein Volk, Ein Reich, Ein Führer" - Adolf Hitler |
|
| Back to top |
|
|
dargosch
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 101
|
| Posted: Mon Apr 12, 2004 1:46 pm Post subject: |
|
|
| pascalbrax wrote: | thank you a lot... now i have my kde working fine
i just got some problems with my ati and the sound dev...
the real pain now is that damned wifi and bluetooth... |
Sound should be no problem. Put ALSA_CARDS="intel8x0" in yout make.conf and emerge alsa-drivers and alsa-utils.
(You have to unmute the card to.. look in the Gentoo-alsa docs..)
*wifi works, but is crippled so far.. the driver is progressing rapidly though..
* Bluetooth I haven't tried.. haven't got a client...
_________________
Registered Linux user #163029 http://counter.li.org/
My Gentoo + PVR-350 + IVTV + MythTV blog is on
http://gentoomythtv.blogspot.com/ |
|
| Back to top |
|
|
pascalbrax
Apprentice
Joined: 21 Jan 2004
Posts: 280
Location: 127.0.0.1
|
| Posted: Mon Apr 12, 2004 1:58 pm Post subject: |
|
|
sound works fine, just emerged alsa-utils (i used kernel 2.6)
i've seen kbluetooth in the portage but it's still masked, so i'll leave it away for the moment.
a strange thing occurs when i disable the mousepad using that key near the mousepad... when i enable it back, it doesn't work until i reboot the pc... what am i supposed to do?
btw: 3D apps works very good
_________________
"One World, One web, One program" - Microsoft Promo ad.
"Ein Volk, Ein Reich, Ein Führer" - Adolf Hitler |
|
| Back to top |
|
|
numerodix
l33t
Joined: 18 Jul 2002
Posts: 743
Location: nl.eu
|
| Posted: Fri Apr 30, 2004 12:48 pm Post subject: |
|
|
I'm having trouble getting an external usb mouse to work. The touchpad is running fine, xfree config is identical to the one here apart from the print out below: https://forums.gentoo.org/viewtopic.php?t=105524
I also have an MS Explorer mouse that I've been using on my stationary computer and I've copied the config and put it in XF86Config like so:
| Code: |
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse1"
Option "Device" "/dev/input/event0"
Option "Protocol" "event"
Option "LeftEdge" "0"
Option "RightEdge" "6000"
Option "TopEdge" "0"
Option "BottomEdge" "6000"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.07"
Option "MaxSpeed" "0.22"
Option "AccelFactor" "0.0004"
Option "SHMConfig" "on"
Option "EdgeMotionSpeed" "0"
Option "SHMConfig" "on"
Option "EdgeMotionSpeed" "0"
EndSection
Section "InputDevice"
Identifier "USBmouse"
Driver "mouse"
Option "Resolution" "1680"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/usbmouse
Option "Buttons" "7"
Option "ZAxisMapping" "6 7"
EndSection
"Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Mouse1" "CorePointer"
InputDevice "USBmouse"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection |
The mouse doesn't work at all in X. I have a bunch of usb modules compiled and use hotplug to load them, dmesg shows no errors my mouse is recognized by model. I also have both the mouse and the touchpad working with gpm, setting proto to imps2 and device to /dev/usbmouse.
If someone is using an external usb mouse, maybe you could show me your config?
# cat /proc/config.gz | gunzip | grep HID
# USB Human Interface Devices (HID)
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# USB HID Boot Protocol drivers
# lsmod
Module Size Used by
fglrx 207876 7
firmware_class 7936 0
hostap 76556 0
8139cp 16512 0
usbhid 31108 0
snd_intel8x0 30468 0
snd_ac97_codec 62596 1 snd_intel8x0
snd_pcm 86308 1 snd_intel8x0
snd_timer 21892 1 snd_pcm
snd_page_alloc 9348 2 snd_intel8x0,snd_pcm
snd_mpu401_uart 6400 1 snd_intel8x0
snd_rawmidi 20384 1 snd_mpu401_uart
snd_seq_device 6792 1 snd_rawmidi
snd 47460 7 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_
d_mpu401_uart,snd_rawmidi,snd_seq_device
ehci_hcd 37896 0
uhci_hcd 29976 0
intel_agp 16412 1
agpgart 28072 2 intel_agp
evdev 7808 1
rtc 10552 0
usbcore 106292 5 usbhid,ehci_hcd,uhci_hcd
battery 8076 0
ac 3596 0
_________________
undvd - ripping dvds should be as simple as unzip |
|
| Back to top |
|
|
pascalbrax
Apprentice
Joined: 21 Jan 2004
Posts: 280
Location: 127.0.0.1
|
| Posted: Fri Apr 30, 2004 6:13 pm Post subject: |
|
|
hi, there, i have a nx7010
i use both the synaptics touchpad (with the synaptics driver) and a logitech usb mouse. everything works fine.
| Code: |
[...]
Section "Module"
#pbx: synaptics driver
Load "synaptics"
[..]
Section "InputDevice"
#pbx: synaptics mouse
Driver "synaptics"
Identifier "Mouse0"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
#pbx:backup Option "Device" "/dev/mouse"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
[...]
Section "ServerLayout"
#pbx:removed for synaptics InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "AlwaysCore"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
| Code: |
root@saiph pascal # lspci
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01)
0000:02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
0000:02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
0000:02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
|
| Code: |
root@saiph pascal # lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c016 Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
|
| Code: | root@saiph pascal # lsmod
Module Size Used by
ohci_hcd 17028 0
8139cp 16000 0
mii 4224 1 8139cp
uhci_hcd 29200 0
intel_agp 16412 1
agpgart 28456 1 intel_agp
snd_intel8x0 30632 0
snd_ac97_codec 62084 1 snd_intel8x0
gameport 3840 1 snd_intel8x0
snd_mpu401_uart 6144 1 snd_intel8x0
snd_rawmidi 19872 1 snd_mpu401_uart
snd_seq_oss 31872 0
snd_seq_midi_event 6144 1 snd_seq_oss
snd_seq 50576 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6792 3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 49956 0
snd_pcm 84516 2 snd_intel8x0,snd_pcm_oss
snd_page_alloc 9220 2 snd_intel8x0,snd_pcm
snd_timer 21124 2 snd_seq,snd_pcm
snd_mixer_oss 17920 1 snd_pcm_oss
snd 46436 12 snd_intel8x0,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
vfat 12288 1
fat 39744 1 vfat
evdev 8192 1
fglrx 202372 9
sbp2 21512 0
ohci1394 31364 0
ieee1394 92724 2 sbp2,ohci1394
usb_storage 26496 0
hid 31680 0
ehci_hcd 24452 0
usbcore 90460 7 ohci_hcd,uhci_hcd,usb_storage,hid,ehci_hcd
|
hope that helps
_________________
"One World, One web, One program" - Microsoft Promo ad.
"Ein Volk, Ein Reich, Ein Führer" - Adolf Hitler |
|
| Back to top |
|
|
numerodix
l33t
Joined: 18 Jul 2002
Posts: 743
Location: nl.eu
|
| Posted: Fri Apr 30, 2004 7:44 pm Post subject: |
|
|
Still doesn't worked and I'm stumped. I even installed Fedora Core 2 test3 to debug this and it works there. Tried the same config in Gentoo, no dice.
| Code: |
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
Mode 0666
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
# This loads the touch pad module
Load "synaptics"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/corefonts/"
FontPath "/usr/share/fonts/75dpi:/unscaled"
FontPath "/usr/share/fonts/100dpi:/unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# This option allows the X server to start up even if the
# mouse device can't be opened/initialized.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "no"
Option "XkbOptions" ""
Option "XkbCompat" ""
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse1"
Option "Device" "/dev/input/event0"
Option "Protocol" "event"
Option "LeftEdge" "0"
Option "RightEdge" "6000"
Option "TopEdge" "0"
Option "BottomEdge" "6000"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.07"
Option "MaxSpeed" "0.22"
Option "AccelFactor" "0.0004"
Option "SHMConfig" "on"
Option "EdgeMotionSpeed" "0"
EndSection
Section "InputDevice"
Identifier "USBmouse"
Driver "mouse"
Option "Resolution" "1680"
Option "Protocol" "auto"
Option "Device" "/dev/usbmouse"
Option "Buttons" "7"
Option "ZAxisMapping" "6 7"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 48.5
VertRefresh 40 - 70
Option "DPMS"
EndSection
Section "Monitor"
Identifier "LCD-WXSGA"
ModelName "Flat Panel"
VendorName "hp"
# Option "DPMS"
HorizSync 31.5 - 48.5
VertRefresh 40-70
EndSection
Section "Monitor"
Identifier "CRT-21@Work"
ModelName "G550"
VendorName "Sony"
Option "DPMS"
# HorizSync ""
# VertRefresh ""
EndSection
Section "Monitor"
Identifier "CRT-19@Home"
ModelName "96P"
VendorName "Samtron"
HorizSync 30-96
VertRefresh 50-160
Option "DPMS"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
# === ATI device section ===
Section "Device"
Identifier "vga0"
VendorName "ATI"
BoardName "ATI Mobility Radeon 9200"
Driver "fglrx"
# === Own Settings (CTh) ===
# VideoRam 65536
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
# === disable PnP Monitor ===
# Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "AUTO, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes" # "no" to turn on TV out
Option "TVStandard" "PAL-B"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Support ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen0"
Device "vga0" # ATI Radeon Mobility 9200
Monitor "LCD-WXSGA"
DefaultDepth 24
# Option "backingstore"
Subsection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
Screen "Screen0"
# InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Mouse1" "CorePointer"
InputDevice "USBmouse" "AlwaysCore"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
|
| Code: | # lspci
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01)
0000:02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
0000:02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
0000:02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
|
| Code: | # lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 003: ID 045e:0047 Microsoft Corp.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
|
| Code: | # lsmod
Module Size Used by
fglrx 207876 7
usbhid 31108 0
ipw2100 69904 0
firmware_class 7936 1 ipw2100
8139cp 16512 0
ehci_hcd 37896 0
uhci_hcd 29976 0
intel_agp 16412 1
agpgart 28072 2 intel_agp
evdev 7808 1
snd_intel8x0 30468 0
snd_ac97_codec 62596 1 snd_intel8x0
snd_mpu401_uart 6400 1 snd_intel8x0
snd_rawmidi 20384 1 snd_mpu401_uart
snd_seq_oss 32128 0
snd_seq_midi_event 6400 1 snd_seq_oss
snd_seq 50320 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6792 3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 49956 0
snd_pcm 86308 2 snd_intel8x0,snd_pcm_oss
snd_page_alloc 9348 2 snd_intel8x0,snd_pcm
snd_timer 21892 2 snd_seq,snd_pcm
snd_mixer_oss 17920 1 snd_pcm_oss
snd 47460 12 snd_intel8x0,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
rtc 10552 0
usbcore 106292 5 usbhid,ehci_hcd,uhci_hcd
battery 8076 0
ac 3596 0
|
_________________
undvd - ripping dvds should be as simple as unzip |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
