| View previous topic :: View next topic |
| Author |
Message |
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
 Posted: Thu Jun 18, 2009 4:54 pm Post subject: lm_sensors issue with kernel 2.6.29 |
 |
|
hi all!
recently i upgraded my kernel to 2.6.29-gentoo-r5. but after the reboot i saw messages that make me wonder about the proper running of lm_sensors:
| Code: |
Jun 18 18:49:40 area52 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
Jun 18 18:49:40 area52 ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45]
Jun 18 18:49:40 area52 ACPI: Device needs an ACPI driver
Jun 18 18:49:40 area52 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
Jun 18 18:49:40 area52 it87: Found IT8716F chip at 0x290, revision 1
Jun 18 18:49:40 area52 it87: in3 is VCC (+5V)
Jun 18 18:49:40 area52 it87: in7 is VCCH (+5V Stand-By)
Jun 18 18:49:40 area52 ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296]
Jun 18 18:49:40 area52 ACPI: Device needs an ACPI driver
Jun 18 18:49:40 area52 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
|
the k8temp issue is ok for me, i already know that the temp might not be correct. but the other messages...
i already unmasked lm_sensors and this installs me version 2.10.8.
can someone help me with this?
thx in advance
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
 |
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Thu Jun 18, 2009 9:39 pm Post subject: |
|
|
Did you use make oldconfig, or some other method?
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Fri Jun 19, 2009 4:43 am Post subject: |
|
|
hi pappy_mcfae!
i made an oldconfig. the sensors seem to run. i got an output after running the sensors command:
| Code: |
root@area52 ~ $ sensors
it8716-isa-0290
Adapter: ISA adapter
VCore: +1.02 V (min = +0.00 V, max = +4.08 V)
VDDR: +3.25 V (min = +0.00 V, max = +4.08 V)
+5V: +4.70 V (min = +0.00 V, max = +6.85 V)
+12V: +11.52 V (min = +0.00 V, max = +16.32 V)
5VSB: +4.68 V (min = +0.00 V, max = +6.85 V)
VBat: +2.96 V
CPU Fan: 1658 RPM (min = 0 RPM)
Case Fan: 1101 RPM (min = 0 RPM)
CPU Temp: +35 C (low = -1 C, high = +127 C) sensor = diode
M/B Temp: +33 C (low = -1 C, high = +127 C) sensor = thermistor
vid: +0.538 V
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+34 C
Core1 Temp:
+24 C
|
thats also why i cannot explain the messages...
greets
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
doctork
Guru
Joined: 25 Apr 2004
Posts: 370
Location: Cleveland, OH
|
| Posted: Fri Jun 19, 2009 5:03 am Post subject: |
|
|
I have an ASUS M2NPV-VM motherboard with an AMD X2 3800+ and the IT8716F sensor chip. I get similar messages in the latest kernel, but the sensors appear to work as they did in earlier versions.. I never noticed the messages until I saw snIP3r's post. I think they can be ignored.
--
doc |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Fri Jun 19, 2009 5:28 am Post subject: |
|
|
That sounds reasonable at the moment since there is nothing proving there's a problem. It's not like I've never ignored mesages. Refcount is 2, should be 1, fixing comes to mind as one that I ignored for quite some time before x.org fixed that.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Fri Jun 19, 2009 6:10 am Post subject: |
|
|
hi!
hmmmm, ok. is it suggested to upgrade to lm_sensors 3.1.0 as described here https://bugs.gentoo.org/show_bug.cgi?id=244598
greets
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Sun Jun 21, 2009 12:07 pm Post subject: |
|
|
hi all!
can someone explain how to use proceed to upgrade to 3.1.0? i think the ebuild is to be put in an OVERLAY directory. but how to apply the patch for sensors-detect?
perhaps someone can help me with this?
greets
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
mantoo
Tux's lil' helper
Joined: 08 Dec 2007
Posts: 98
Location: Germany
|
| Posted: Sat Oct 10, 2009 1:22 pm Post subject: |
|
|
| snIP3r wrote: | hi all!
can someone explain how to use proceed to upgrade to 3.1.0? i think the ebuild is to be put in an OVERLAY directory. but how to apply the patch for sensors-detect?
perhaps someone can help me with this?
greets
snIP3r |
the trick is to create a sub-folder called "files" within the lm_sensors-folder, placed in yout overlay-directory. an ebuild lm_sensors-3.1.0.ebuild should do the rest |
|
| Back to top |
|
|
dusik
Tux's lil' helper
Joined: 04 Jan 2005
Posts: 129
Location: Durham, NC, USA
|
| Posted: Fri Mar 12, 2010 8:56 pm Post subject: |
|
|
I've got the same conflict between ACPI and nForce2_smbus in 2.6.33 kernel, and with lm_sensors 3.1.2 installed. I remember back when I installed Gentoo I actually had to run it with the "noacpi" option for it to boot all the way, but now I can drop it and then I get the same warning messages:
| Code: | ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x1c40-0x1c45]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
nForce2_smbus 0000:00:01.1: Error probing SMB2. |
I do have a working system, but it doesn't look like the issue has been resolved. |
|
| Back to top |
|
|
|
Kernel & Hardware
