| View previous topic :: View next topic |
| Author |
Message |
truc
Advocate
Joined: 25 Jul 2005
Posts: 3199
|
 Posted: Thu May 07, 2009 8:19 am Post subject: [WEBCAM] Échec de l'installation de media-video/ov51x-jpeg |
 |
|
Bon, j'ai essayé de suivre http://en.gentoo-wiki.com/wiki/Webcam, mais je n'y arrive point! J'en appelle donc à votre aide 
Bon d'abord:
| Code: | lsusb
Bus 001 Device 002: ID 05ca:183a Ricoh Co., Ltd Visual Communication Camera VGP-VCC7 [R5U870] |
Je suis donc dans le cas http://en.gentoo-wiki.com/wiki/Webcam#Ricoh_R5U870 ..
Ensuite, dans le noyau, voila ce que j'ai activé
| Code: | Device Drivers --->
Multimedia devices --->
<*> Video For Linux
[ ] Enable Video For Linux API 1 (DEPRECATED)
[*] Enable Video For Linux API 1 compatible Layer
< > DVB for Linux
*** Multimedia drivers ***
[ ] Load and attach frontend and tuner driver modules as needed
[ ] Customize analog and hybrid tuner modules to build --->
[*] Video capture adapters --->
--- Video capture adapters
[ ] Enable advanced debug functionality
[ ] Enable old-style fixed minor ranges for video devices
[*] Autoselect pertinent encoders/decoders and other helper chips
<M> Virtual Video Driver
< > BT848 Video For Linux
< > SAA5246A, SAA5281 Teletext processor
< > SAA5249 Teletext processor
< > Philips SAA7134 support
< > Hexium HV-PCI6 and Orion frame grabber
< > Hexium Gemini frame grabber
< > Conexant 2388x (bt878 successor) support
< > Conexant cx23416/cx23415 MPEG encoder/decoder support
< > Marvell 88ALP01 (Cafe) CMOS Camera Controller support
< > SoC camera support
[*] V4L USB devices --->
--- V4L USB devices
<M> USB Video Class (UVC)
[*] UVC input events device support
< > GSPCA based webcams --->
< > Hauppauge WinTV-PVR USB2 support
< > Empia EM28xx USB video capture support
< > USB video devices based on Nogatech NT1003/1004/1005
< > USB ET61X[12]51 PC Camera Controller support
< > USB SN9C1xx PC Camera Controller support
< > USB ZC0301[P] Image Processor and Control Chip support
< > USB ZR364XX Camera support
< > USB Syntek DC1125 Camera support
< > USB Sensoray 2255 video capture device |
J'essaie ensuite d'installer le fameux media-video/ov51x-jpeg-1.5.9, mais la compilation échoue, et je n'arrive pas à trouver sur le net, ce qu'il me manque/ce que j'ai mal fait:
| Code: | emerge -v media-video/ov51x-jpeg
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] media-video/ov51x-jpeg-1.5.9 0 kB [1]
Total: 1 package (1 new), Size of downloads: 0 kB
Portage tree and overlays:
[0] /var/gentoo/overlays/gentoo
[1] /var/gentoo/overlays/sunrise
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) media-video/ov51x-jpeg-1.5.9 from sunrise
* ov51x-jpeg-1.5.9.tar.gz RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found kernel object directory:
* /lib/modules/2.6.29.2/build
* Found sources for kernel version:
* 2.6.29.2
* Checking for suitable kernel configuration options... [ ok ]
>>> Unpacking source...
>>> Unpacking ov51x-jpeg-1.5.9.tar.gz to /var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work
>>> Source unpacked in /var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work
>>> Compiling source in /var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9 ...
ln: creating symbolic link `Module.symvers': File exists
* Preparing ov51x-jpeg module
make -j3 HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= KERNELDIR= all
make -C /lib/modules/2.6.29.2/build M=/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9 modules
make[1]: Entering directory `/usr/src/linux-2.6.29.2'
CC [M] /var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.o
CC [M] /var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov511-decomp.o
CC [M] /var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov518-decomp.o
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov511-decomp.c: In function ‘Decompress400’:/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov
518-decomp.c: In function ‘print_qt’:
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov518-decomp.c:459: error: implicit declaration of function ‘info’
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov511-decomp.c:468: error: implicit declaration of function ‘info’
make[2]: *** [/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov511-decomp.o] Error 1
make[2]: *** Waiting for unfinished jobs....
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:543: error: ‘v4l_compat_ioctl32’ undeclared here (not in a function)
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: In function ‘create_proc_ov511_cam’:
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:677: error: implicit declaration of function ‘info’
make[2]: *** [/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov518-decomp.o] Error 1
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: In function ‘ov51x_clear_snapshot’:
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:1691: error: implicit declaration of function ‘warn’
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: In function ‘ov51x_v4l1_ioctl’:
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: warning: passing argument 1 of ‘video_usercopy’ from incompatible pointer type
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: warning: passing argument 2 of ‘video_usercopy’ makes integer from pointer without a cast
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: warning: passing argument 4 of ‘video_usercopy’ makes pointer from integer without a cast
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: error: too many arguments to function ‘video_usercopy’
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: At top level:
/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6651: warning: initialization from incompatible pointer type
make[2]: *** [/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9/ov51x-jpeg-core.o] Error 1
make[1]: *** [_module_/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/work/ov51x-jpeg-1.5.9] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.29.2'
make: *** [all] Error 2
*
* ERROR: media-video/ov51x-jpeg-1.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3284: Called linux-mod_src_compile
* environment, line 2537: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
* The die message:
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= KERNELDIR= all
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/temp/environment'.
* This ebuild is from an overlay named 'sunrise': '/var/gentoo/overlays/sunrise/'
*
>>> Failed to emerge media-video/ov51x-jpeg-1.5.9, Log file:
>>> '/var/tmp/portage/media-video/ov51x-jpeg-1.5.9/temp/build.log'
|
Bon toute l'erreur semble venir de | Code: | | error: implicit declaration of function ‘info’ |
mais bon voilà, ok c'est sympa, mais j'suis bloqué!
Merci d'avance!
_________________
The End of the Internet! |
|
| Back to top |
|
 |
_KdZ
n00b
Joined: 13 Jan 2009
Posts: 33
|
| Posted: Fri Sep 11, 2009 9:58 am Post subject: |
|
|
Bonjour,
exactement le même pb avec le dernier kernel en date.
Une idée ? |
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Fri Sep 11, 2009 9:20 pm Post subject: |
|
|
| même souci ici, avec un kernel 2.26.26 et 2.26.30 |
|
| Back to top |
|
|
_KdZ
n00b
Joined: 13 Jan 2009
Posts: 33
|
| Posted: Fri Sep 11, 2009 9:44 pm Post subject: |
|
|
Salut, je viens de recompiler mon kernel en utilisant mon ancien fichier de config et y activant les options suivantes : http://en.gentoo-wiki.com/wiki/Webcam#Kernel_configuration
Et j'ai pu l'installer sans pb, par contre ça ne fonctionne pas avec VLC mais c'est surement un autre pb...
| Code: | $ vlc -V X11 v4l:/dev/video0:size=320x240VLC media player 0.9.10 Grishenko
[00000001] main libvlc debug: VLC media player - version 0.9.10 Grishenko - (c) 1996-2009 the VideoLAN team
[00000001] main libvlc debug: libvlc was configured with ./configure '--prefix=/usr' '--build=i686-pc-linux-gnu' '--host=i686-pc-linux-gnu' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--datadir=/usr/share' '--sysconfdir=/etc' '--localstatedir=/var/lib' '--enable-a52' '--disable-aa' '--enable-faad' '--enable-alsa' '--disable-altivec' '--disable-arts' '--disable-asademux' '--disable-atmo' '--disable-bonjour' '--disable-fribidi' '--disable-vcd' '--disable-cddax' '--disable-libcddb' '--disable-libcdio' '--disable-csri' '--enable-dbus' '--enable-dbus-control' '--disable-dirac' '--disable-directfb' '--disable-dc1394' '--disable-debug' '--enable-dca' '--disable-dv' '--disable-dvb' '--enable-dvdread' '--enable-dvdnav' '--enable-esd' '--disable-fb' '--enable-avcodec' '--enable-avformat' '--enable-swscale' '--disable-imgresample' '--enable-postproc' '--enable-flac' '--disable-fluidsynth' '--disable-fontconfig' '--disable-ggi' '--disable-gnomevfs' '--disable-gnutls' '--enable-hal' '--disable-httpd' '--disable-id3tag' '--disable-jack' '--disable-kate' '--disable-libass' '--disable-caca' '--enable-libgcrypt' '--enable-notify' '--disable-libproxy' '--disable-libtar' '--disable-libsysfs' '--disable-libv4l2' '--disable-lirc' '--disable-live555' '--disable-lua' '--disable-mkv' '--disable-mmx' '--disable-mod' '--enable-mad' '--enable-libmpeg2' '--disable-mpc' '--enable-ncurses' '--disable-mozilla' '--with-mozilla-pkg=' '--enable-ogg' '--enable-glx' '--enable-opengl' '--enable-galaktos' '--disable-optimize-memory' '--disable-oss' '--disable-pda' '--enable-png' '--disable-portaudio' '--disable-pulse' '--disable-pvr' '--enable-qt4' '--disable-realrtsp' '--disable-run-as-root' '--disable-smb' '--disable-schroedinger' '--enable-sdl' '--disable-sdl-image' '--disable-shout' '--disable-speex' '--disable-sse' '--disable-sout' '--enable-svg' '--disable-svgalib' '--disable-taglib' '--disable-theora' '--enable-freetype' '--disable-twolame' '--disable-upnp' '--enable-v4l' '--enable-v4l2' '--disable-vcdinfo' '--disable-vcdx' '--enable-vorbis' '--enable-loader' '--enable-x11' '--enable-screen' '--enable-x264' '--disable-xinerama' '--enable-libxml2' '--disable-xosd' '--enable-xvideo' '--disable-xvmc' '--disable-zvbi' '--disable-snapshot' '--disable-growl' '--disable-optimizations' '--enable-fast-install' '--disable-vlm' '--disable-skins2' '--disable-remoteosd' 'build_alias=i686-pc-linux-gnu' 'host_alias=i686-pc-linux-gnu' 'CFLAGS=-O2 -march=i686 -pipe' 'LDFLAGS=-Wl,-O1' 'CPPFLAGS=' 'CXXFLAGS=-O2 -march=i686 -pipe' 'PKG_CONFIG_PATH=/usr/qt/3/lib/pkgconfig'
[00000001] main libvlc debug: translation test: code is "C"
[00000001] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
libdvdnav: Using dvdnav version 0.1.10 from http://dvd.sf.net
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdread: Could not open v4l:/dev/video0:size=320x240 with libdvdcss.
libdvdread: Can't open v4l:/dev/video0:size=320x240 for reading
libdvdnav: vm: faild to open/read the DVD
[00000334] access_directory access error: v4l:/dev/video0:size=320x240: No such file or directory
[00000334] access_file access error: cannot open file v4l:/dev/video0:size=320x240 (No such file or directory)
[00000328] main input error: open of `v4l:/dev/video0:size=320x240' failed: could not create access: no suitable access module
|
Reviens nous dire quand c'est bon. |
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Fri Sep 11, 2009 10:21 pm Post subject: |
|
|
| quel kernel as-tu ? |
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Mon Sep 14, 2009 1:12 pm Post subject: |
|
|
Hello, j'ai bien réussi a installer le package ov51x-jpeg-1.5.9, contenant le driver de ma hercule deluxe, donc je modprobe le driver ovx51-jpeg, mais je m'apercois que mon dmesg affiche cela :
| Quote: | usbcore: registered new interface driver ov51x
ov51x_jpeg1.5.9 : ov51x USB Camera Driver<6>usb 5-2.1: USB disconnect, address 6
usb 5-2.1: new full speed USB device using ehci_hcd and address 7
usb 5-2.1: configuration #1 chosen from 1 choice
gspca: probing 05a9:4519
ov519: Can't determine sensor slave IDs
ov519: OV519 Config failed
ov519: probe of 5-2.1:1.0 failed with error -16
ov51x_jpegUSB OV519 video device found<3>ov51x_jpeg: Can't determine sensor slave IDs
ov51x_jpeg: OV519 Config failed
ov51x_jpeg: Camera initialization failed
ov51x: probe of 5-2.1:1.0 failed with error -5
|
Et forcemment la webcam ne fonctionne pas .. la je sèche ! |
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Mon Sep 14, 2009 1:32 pm Post subject: |
|
|
Y a du mieux ! Je passais par un concentrateur usb, le probleme semblait venir de la ! Donc maintenant ma webcam est reconnu ! Cependant , lorsque je fais un mplayer /dev/video0, je cela comme erreur :
| Quote: | patriick@Patriick ~ $ mplayer /dev/video0
MPlayer SVN-r29463-4.1.2 (C) 2000-2009 MPlayer Team
Lecture de /dev/video0
Fichier non trouv�� : '/dev/video0'
��chec �� l'ouverture de '/dev/video0'
Sortie... (Fin du fichier)
|
Mais lorsque je fais la commande "LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so mplayer tv:// -tv driver=v4l:device=/dev/video0 -fps 120", jai bien mplayer qui se lance avec ma webcam !
Ma question est pourquoi camorama et mplayer de detecte pas /dev/video0 par defaut ?! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
