| View previous topic :: View next topic |
| Author |
Message |
ISHAIM
Apprentice
Joined: 08 Oct 2006
Posts: 161
Location: Chicago, IL
|
 Posted: Thu Sep 24, 2009 1:47 pm Post subject: compiz-manager no window borders [SOLVED] |
 |
|
I am having trouble loading compiz. What I am reading sounds like compiz should be started through compiz-manager in a terminal, however I can load up the CompizConfig Settings Manager in Gnome and check preferences, they have no effect.
I have unmasked compiz -0.8.2-r3 and compiz-fusion-0.8.2 to be able to install them, and all the dependencies which I have also unmasked/emerged. I will post any other outputs/package.keywords if necessary as I have seen others do. I'm unsure which ones are needed at this point.
Here is the output of compiz-manager in terminal:
| Code: | Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:0640 (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x1024) to maximum 3D texture size (2048): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
Starting emerald
/usr/bin/compiz (core) - Fatal: Root visual is not a GL visual
/usr/bin/compiz (core) - Error: Failed to manage screen: 0
/usr/bin/compiz (core) - Fatal: No manageable screens found on display :0.0 |
Thank you.
Last edited by ISHAIM on Fri Sep 25, 2009 3:25 pm; edited 3 times in total |
|
| Back to top |
|
 |
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Thu Sep 24, 2009 2:06 pm Post subject: |
|
|
Can you give me the output of:
cat /etc/X11/xorg.conf
I'm suspecting you are using a non-3D capable driver. |
|
| Back to top |
|
|
ISHAIM
Apprentice
Joined: 08 Oct 2006
Posts: 161
Location: Chicago, IL
|
| Posted: Thu Sep 24, 2009 2:10 pm Post subject: |
|
|
Here is my xorg.conf:
| Code: | # nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Mon May 11 15:57:20 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "aiglx" "true"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection |
|
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Thu Sep 24, 2009 4:24 pm Post subject: |
|
|
[quote="ISHAIM"]Here is my xorg.conf:
Option "aiglx" "true"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
Try removing the above lines, they might interfere. You are using a driver capable of doing this, still it does not work. If removing the above lines does not work, then please post /var/log/Xorg.0.log  |
|
| Back to top |
|
|
ISHAIM
Apprentice
Joined: 08 Oct 2006
Posts: 161
Location: Chicago, IL
|
| Posted: Thu Sep 24, 2009 9:52 pm Post subject: |
|
|
That had no effect.
Here is /var/log/Xorg.0.log:
| Code: | X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-gentoo-r5 x86_64
Current Operating System: Linux gentoo 2.6.30-gentoo-r5 #4 SMP Wed Sep 23 00:11:43 CDT 2009 x86_64
Build Date: 23 September 2009 11:31:31PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 24 16:43:45 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/misc/").
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(==) FontPath set to:
/usr/share/fonts/75dpi/,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x1200
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation unknown chipset (0x0640) rev 161, Mem @ 0xe6000000/16777216, 0xd0000000/268435456, 0xe4000000/33554432, I/O @ 0x0000a000/128, BIOS @ 0x????????/524288
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.60 Mon May 11 15:33:16 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 1048576 kBytes
(--) NVIDIA(0): VideoBIOS: 62.94.29.00.50
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 9500 GT at PCI:1:0:0:
(--) NVIDIA(0): hp f1703 (CRT-1)
(--) NVIDIA(0): hp f1703 (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-1
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us" |
|
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Fri Sep 25, 2009 11:00 am Post subject: |
|
|
| ISHAIM wrote: | | Code: |
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
|
|
There is a problem. Please post the output of:
eselect opengl list
This is under the assumption you installed the nvidia driver through gentoo!
The output probably says xorg-x11 but should be the one from nvidia... |
|
| Back to top |
|
|
ISHAIM
Apprentice
Joined: 08 Oct 2006
Posts: 161
Location: Chicago, IL
|
| Posted: Fri Sep 25, 2009 1:56 pm Post subject: |
|
|
I see. Here is the output of eselect opengl list:
| Code: | Available OpenGL implementations:
[1] nvidia
[2] xorg-x11 * |
I ran eselect opengl set 1.
That seems to allow compiz effects to work. There is one problem left that I have. None of the windows have a titlebar or border around them. From the Compiz Fusion Icon, I have to choose Metacity as my Window Manager, from which the compiz effects stop working. Here is the output of compiz-manager now:
| Code: | isaias@gentoo ~ $ compiz-manager
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:0640 (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
NVIDIA: could not open the device file /dev/nvidiactl (Permission denied).
Comparing resolution (1280x1024) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
/home/isaias/.themes/Clearlooks-Visto/gtk-2.0/gtkrc:54: Clearlooks configuration option "menuitemstyle" is not supported and will be ignored.
/home/isaias/.themes/Clearlooks-Visto/gtk-2.0/gtkrc:55: Clearlooks configuration option "listviewitemstyle" is not supported and will be ignored.
/home/isaias/.themes/Clearlooks-Visto/gtk-2.0/gtkrc:56: Clearlooks configuration option "progressbarstyle" is not supported and will be ignored.
Checking for FBConfig: NVIDIA: could not open the device file /dev/nvidiactl (Permission denied).
present.
Checking for Xgl: not present.
Starting emerald
NVIDIA: could not open the device file /dev/nvidiactl (Permission denied).
/home/isaias/.themes/Clearlooks-Visto/gtk-2.0/gtkrc:54: Clearlooks configuration option "menuitemstyle" is not supported and will be ignored.
/home/isaias/.themes/Clearlooks-Visto/gtk-2.0/gtkrc:55: Clearlooks configuration option "listviewitemstyle" is not supported and will be ignored.
/home/isaias/.themes/Clearlooks-Visto/gtk-2.0/gtkrc:56: Clearlooks configuration option "progressbarstyle" is not supported and will be ignored.
inotify_add_watch: No such file or directory |
The emerald window decorator is selected from the list in the Compiz Fusion Icon to no effect.
Thank you very much for your help. |
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Fri Sep 25, 2009 2:05 pm Post subject: |
|
|
Nice, looking at the output you posted, this could be the problem:
inotify_add_watch: No such file or directory
Do you have inotify in your kernel?
cat /usr/src/`uname -r`/.config | grep INOTIFY
Also, you could try another theme and see if that helps. Because it seems compiz is not happy with the current one XD |
|
| Back to top |
|
|
ISHAIM
Apprentice
Joined: 08 Oct 2006
Posts: 161
Location: Chicago, IL
|
| Posted: Fri Sep 25, 2009 3:25 pm Post subject: |
|
|
| Actually the problem was that I didn't have some options in the CompizConfiguration Setup Manager set. I fixed them and am using Compiz just fine, but I'm still worried about what you're saying about inotify. I will check later, but if I don't have it in my kernel, what section of the kernel configuration can I find it? |
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Fri Sep 25, 2009 5:35 pm Post subject: |
|
|
| ISHAIM wrote: | Actually the problem was that I didn't have some options in the CompizConfiguration Setup Manager set. I fixed them and am using Compiz just fine, but I'm still worried about what you're saying about inotify. I will check later, but if I don't have it in my kernel, what section of the kernel
configuration can I find it? |
You don't have inotify? What device does your OS run on? Embedded?  |
|
| Back to top |
|
|
ISHAIM
Apprentice
Joined: 08 Oct 2006
Posts: 161
Location: Chicago, IL
|
| Posted: Fri Sep 25, 2009 7:47 pm Post subject: |
|
|
| Sorry, I meant what part of make menuconfig can I find that under? I'm at work now, won't be able to check until later today. |
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Fri Sep 25, 2009 8:10 pm Post subject: |
|
|
| ISHAIM wrote: | | Sorry, I meant what part of make menuconfig can I find that under? I'm at work now, won't be able to check until later today. |
File Systems -> Inotify support for userspace
That is the only one I have activated. |
|
| Back to top |
|
|
ISHAIM
Apprentice
Joined: 08 Oct 2006
Posts: 161
Location: Chicago, IL
|
| Posted: Sat Sep 26, 2009 4:34 pm Post subject: |
|
|
| Actually, I do have inotify in my kernel. Should I be concerned about those error messages in that case? |
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Sun Sep 27, 2009 8:24 am Post subject: |
|
|
| ISHAIM wrote: | | Actually, I do have inotify in my kernel. Should I be concerned about those error messages in that case? |
Well, ofcourse I'm no compiz expert. But, whenever a program misbehaves, you should read these (sometimes error) messages to figure out what could be going wrong. These messages are an indication something isn't as it should be causing undesired behaviour. The cause that you have no borders could be found by following those messages. Did you try another theme btw? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
