Flipperrr
Tux's lil' helper
Joined: 26 Mar 2003
Posts: 83
Location: Netherlands
|
 Posted: Wed Oct 22, 2003 8:04 pm Post subject: setting/getting an ip address on my pptp connection (solved) |
 |
|
Hi,
I'm having a problem with a vpn connection, and I think it has to do with the fact that I don't recieve a valid ip address from the VPN router (cisco 3000) on my ppp0 interface.
I have the following situation (outside vpn not real ip):
| Code: |
my home gateway to inet inet outside vpn inside vpn lan
10.0.0.150 -> 10.0.0.138 |-----| 195.0.0.10 / 192.168.150.1 -> 192.168.150.0/24
|
When I connect using pptpclient everything goes fine. I can ping 192.168.150.1, but no more than that. When I check ifconfig I notice that I have the same address for my eth0 as for my ppp0 (10.0.0.150).
I think I should get a DHCP address from the VPN machine (that's what happens when I connect with windows), but somehow it doesn't want to. Am I missing something really stupid here? Or is there a way to set the ip address on my ppp0 without losing the connection?
This is my ifconfig result
| Code: |
eth0 Link encap:Ethernet HWaddr 00:10:A7:12:63:94
inet addr:10.0.0.150 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2022 errors:0 dropped:0 overruns:0 frame:0
TX packets:1939 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1772440 (1.6 Mb) TX bytes:223198 (217.9 Kb)
Interrupt:5 Base address:0x4000
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.0.0.150 P-t-P:195.0.0.10 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:17 errors:0 dropped:0 overruns:0 frame:0
TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:724 (724.0 b) TX bytes:1686 (1.6 Kb)
|
And this is my routing table
| Code: |
Destination Gateway Genmask Flags Metric Ref Use Iface
195.0.0.10 10.0.0.138 255.255.255.255 UGH 0 0 0 eth0
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.150.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 10.0.0.138 0.0.0.0 UG 1 0 0 eth0
|
Thanks in advance.
Last edited by Flipperrr on Wed Oct 22, 2003 10:15 pm; edited 1 time in total |
|
Networking & Security
